Tidying up objects and listeners (basic)
A newbie wannabe-AS3 question. My difficulty is (I think)
removing unwanted objects and listeners as I move from one mode to
another in my project ... altho my difficulty behind that is
probably inadequate understanding of Display List basics.
In one 'mode' of my project I have generated the following
structure:
1.... Sprite ("reviewPage");
2a......... Some graphics on reviewPage
2b......... TextField ("commentBox");
2c......... A number of Sprites ("displayCard_1",
"displayCard_2", ... "displayCard_n");
3a............. Some graphics on each displayCard;
3b............. Several EventListeners on each displayCard
(e.g. displayCard.addEventListener(MouseEvent.CLICK,
gotoReviseCardMode, false, 0, true))
3c............. TextField ("questionBox_1" ...
"questionBox_n");
3d............. TextField ("equationBox_1" ...
"equationBox_n");
3e............. TextField ("answerBox_1" ... "answerBox_n").
One of the eventListeners attached to each displayCard Sprite
calls a function intended to tidy-up the unwanted objects and
eventListeners and then shift the activity to a different mode,
defined by another function.
There is only one child on the stage. I assume this will be
my reviewPage with all the objects it holds. However when I trace
it, and it's name, I get "root1 [object MainTimeline]". Using
stage.removeChildAt(0) removes all the visible objects from the
Display List and leaves me with no children on the stage.
I've tried to 'explore' my structure by writing a small
function to identify each object/container and the hierarchy of
objects attached to them ... but have as yet been spectacularly
unsuccessful in that effort and overwhelmed with error messages.
I have a couple of concerns / questions:
1. Do I remove all the eventListeners when I
stage.removeChildAt(0)?
2. Do I still need to remove these objects from memory? If
so, how? How can I explore what listeners and objects are using
memory after I've attempted a clean-up like this?
3. How do I remove just one of the TextField objects, say
answerBox_212, or one of the eventListeners attached to one of the
"displayCard" Sprites, from the Display List and/or from memory?
Any guidance would be greatly appreciated.
Cheers
Dougal
Hi John,
Many thanks for your reply, where can I find out what the default setting is? In the style sheet, margin is set to 0. Do you mean the <p> </p> on the first line of text? The code for that section is below, do I not need the <p> </p>?
<h6>Heding 1</h6>
<p>An image placeholder was used in this layout in the .header where you'll likely want to place a logo. It is recommended that you remove the placeholder and replace it with your own linked logo. </p>
<h3>Logo Replacement</h3>
<p> Be aware that if you use the Property inspector to navigate to your logo image using the SRC field (instead of removing and replacing the placeholder), you should remove the inline background and display properties. These inline styles are only used to make the logo placeholder show up in browsers for demonstration purposes. </p>
<p>To remove the inline styles, make sure your CSS Styles panel is set to Current. Select the image, and in the Properties pane of the CSS Styles panel, right click and delete the display and background properties. (Of course, you can always go directly into the code and delete the inline styles from the image or placeholder there.)</p>
Many thanks for your help.
Regards
Nick
Similar Messages
-
Hello, I have the usual issue to use AcroExch.PDDoc/AcroExch.App/AcroExch.AVDoc objects in Visual Basic (MS EXCEL). On my company's machine I have Acrobat X and everything works fine. I am looking for the cheapest solution to get the stuff running on another machine... is there any way to do that with the Acrobat SDK, or do I need to purchase a full version of Acrobat XI ($$) ?
The Acrobat SDK is nothing by itself. It is just information on how to automate Acrobat - just as the Office SDK doesn't include Office, but is for people who already have purchased Office but want to automate it.
These automation things are MARKETING TOOLS FOR ACROBAT. Consider this and the technical limitations make a lot more sense.
So, yes, you need to buy Acrobat. Standard is cheaper than Pro. -
Basic questions about Objects and variables...
If I have the following:
Species theAnimal = new Species();
Am I right in saying that the object here is 'theAnimal'?.
If we just wrote it as:
Species theAnimal
Then i'm assuming that here 'theAnimal' is the variable name...right?
I'm just trying to get facts straight when reading.
Thanks for the help...
YashAt first, theAnimal is pointing to one object, and
theMammoth is pointing to another?
In the final line, they're both pointing to the same
object. Isn't that kind of saying, they're pointing
to the same memory address/location?Yes.
They might actually hold the physical memory address of the object, or they might hold some other abstraction that the VM uses to locate the object. In either case, though, they both hold the same value, and you can picture that value as the address of the object. -
Hi, I'm using VS2012.
I want to use this ExtensionAttributes9 field to store date value for each user object. I use UserPrincipal class, a collection of these objects are then bind to a gridview control. Is ExtensionAttributes9 a field in AD user object?
How can I access it and bind to the gridview?
If this field isn't available then what other field can use?
Thank you.
Thank youUserPrincipal is basically a wrapper around DirectoryEntry:
http://msdn.microsoft.com/en-us/library/system.directoryservices.directoryentry.aspx and only provides a subset of the Active Directory, although the most common, attributes that are available for the user object. The attribute that you
seek is not one of them.
By utilizing the method that I provided you a link to, it will return the underlying DirectoryEntry that was used to build the UserPrincipal object and should allow you to access the attribute that you seek.
It would be greatly appreciated if you would mark any helpful entries as helpful and if the entry answers your question, please mark it with the Answer link. -
HI
Can anyone give me the link for ABAP Objects and BADI'S.
I would like to have ABAP Objects with Example as well as BADIS.
Please tell me as iam new to those.
Thanks in advanceHi,
ABAP objects have an elaborated list plz mention specific objects u want to know.
These are few of the links which I got through the sdn.sap for the objects like ALV,LSMW,IDOCS, etc..
Start with this.Refer this
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Remote Function Call:
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
http://www.techinterviews.com/?p=198
http://www.techinterviews.com/?p=326
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.allinterview.com/Interview-Questions/ABAP.html
links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
some more materials.
Go through the following Documents Links & Materials for ABAP Objects
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/09/understandingABAPObjects&
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
FOR BADI'S:
Check this blogs 2 find a BADI:
How to find if we have a BADI in Transaction VB02
Re: BADI for screen enhancement in MM01 transaction
Re: BADI and User exits
How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
When to Use a BAdI?)
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
How to implement a BAdI And How to Use a Filter
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
Introducing Business Add-Ins
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
How to implement BAdi in Enhancement Framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Business Add-Ins
http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
BAdI: Customer-Defined Functions in the Formula Builder
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
You can check the links for Step by Step Badi Implemntation
(very helpful self learning docs).
BADI Step by Step Implementation.
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-serieshttps:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40921dd7-d5cf-2910-1894-bb62316afbd1
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
Guys,
Not even sure if this is possible...
How do I find BOR calls in an ABAP program.
Example: BUS2088 or BUS2008 in program SAPLCOIH - for PM/CS orders).
PeteAHi Peter,
Specify your business object and the method of the BOR object in the BASIC data tab in PFTC transaction.
If you want to trigger the Workflow through and event then you will have to first link your event of the Business Object to the WorkFlow Task in Workflow Builder (TCODE PFTC) and then you can do the following :
Please refer the code below to for your information.
Data for workflow trigger
DATA: objtype LIKE swetypecou-objtype,
objkey LIKE sweinstcou-objkey,
event LIKE swetypecou-event,
event_container LIKE swcont OCCURS 0 WITH HEADER LINE.
objtype = 'ZBUS1001'. "Material [sub object of BUS1001]
MOVE v_wfmatnr TO objkey. "V_WFMATNR is material number
event = 'CreatePLMMaterial'."Custom Event defined in
ZBUS1001 [Tcode SWO1]
REFRESH event_container.
*Following are the Event parameters required in the *Workflow
swc_set_element event_container 'Attachment' v_wfattachment.
swc_set_element event_container 'Material' v_wfmatnr.
swc_set_element event_container 'TisGroup' v_wftisgroup.
swc_set_element event_container 'SchDate' v_schdate.
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
objtype = objtype
objkey = objkey
event = event
TABLES
event_container = event_container
EXCEPTIONS
objtype_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
COMMIT WORK.
Please reward some points if it helps you.
Regards,
Amit M. Mishra -
Hi,
Can you explain what is Match code objects and ID
Regards,
Bharath Mohan BHi,
For many entry fields, but not all, SAP provides a search function called a Matchcode. Matchcodes allow you to select a value from a list or search for a value by categories of data if there are many possibilities.
Types of Matchcodes
Matchcodes fall into three basic categories:
1) Short list or hit list
The values are listed on one screen. For longer lists, you may need to scroll down to see all the values.
2) Restrict Value Range
Many entries are available for the field. A number of tabbed screens with different categories display so that you can enter your search criteria.
3) Calendar search
A calendar-type dialog box is displayed so that you can select day, month, and year. This is used in date fields such as invoice posting date.
Matchcodes were replaced with Search Helps starting with Release 4.0. Please use search helps to assign an input help to a field.
Existing matchcodes were automatically converted to search helps. A matchcode object is hereby converted to a collective search help with the same name. Each matchcode ID of the matchcode object is converted into an elementary search help with the same name and assigned to the collective search help created from the matchcode object.
A matchcode is a means of finding data records stored in the system. The matchcode is defined in the ABAP Dictionary in two steps:
You first define the relevant tables and fields for the search in a matchcode object. A matchcode object describes the set of all possible search paths for a search string.
You then create one or more matchcode IDs for a matchcode object. A matchcode ID describes a special search path for a search string. The matchcode ID defines the fields or field combinations to be used in the search.
http://www.sapdevelopment.co.uk/dictionary/shelp/shelphome.htmhttp://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
This is also a good link
What are Search Helps, How to create and whats the Use ?
A search help can be created in ABAP Dictionary ( tcode se11 )
Create a new search help (say myHelp) , choose Elementary search help (simple one), select Definitions tab, enter the table name(say myTable) in "Text Table" text box.
Then enter the column to be used (say myField) for this help in search help parameter, choose Import/Export, give Lpos as 1, and activate. ( You can add more columns from the same table here).
In report, code as
parameter p1 like myTable-myField matchcode object myHelp.
when you execute this report, p1 will have a f4 help enabled. The help list will have all values from myTable for field myField.
Don't forget to reward if useful...... -
Callable object and Guided procedures
Hi all,
Where we use callable objects? i want to know about the basic of callable object and guided procedure?
sorry if my question is very sillyHi again
Callable objects can be many types, including applications (like web dynpro), services (e.g. web services), remote function modules, intercative and composite forms, etc.
The GP framework comes with a set of ready-to-use COs that you can see when you open the Create Callable Object wizard. Here is a list of the so-called predefined COs in GP:
http://help.sap.com/saphelp_nw70/helpdata/en/0f/619fd378a641b29386063019c24fc4/content.htm
Since applications and services themselves are of various types, here is a link for creating COs of those types in GP design time:
http://help.sap.com/saphelp_nw70/helpdata/en/da/a680415dc6050de10000000a1550b0/content.htm
You can also implement your own callable object type, but here you have to use the NW Developer Studio, apart from the GP worksets. Here is a link to give an overview:
http://help.sap.com/saphelp_nw70/helpdata/en/43/e74cb156b60a29e10000000a11466f/content.htm
Finally, here is a document that gives general info about exposing applications as COs and links to various areas, connected to CO implementation and usage in GP:
http://help.sap.com/saphelp_nw70/helpdata/en/08/d88041a17e060de10000000a1550b0/content.htm
Hope that is helpful
Greetings and good luck with the reading
Petra -
EEWB : how to determine the business object and the extension type ?
Hi,
I ask myself how to determine the business object and the extension type to use to add new fields in a new tab of a specific transaction ? what means each business object, does that correspond to a specific transaction ?
I need to add a new tab in the BaMI business activity in transaction CRMD_ORDER just after the tab 'Actions' at header level.
Could you help me please to determine which business object and extension type I have to select during creation of the project and which business object category I have to select during creation of the extension (wizard) ?
Thanks for your help,
MarieMarie,
In order to determine what type of transaction you are extending, you will need to look at the customizing for the transaction.
In the IMG:
Goto:
Customer Relationship Management->Transactions->Basic Settings->Define Transaction Types.
You will then choose the transaction defined that you want to extend. If you display the details of the transaction you will find an attribute called:
"Leading Transaction Category". This tells you the general context in which the transaction is used. The other item to view is the assignment of business transaction categories found in the maintenance screen.
This information general corresponds to one of the options that the EEWB will give you on the transaction type.
As far as extensions go, my recommendation is the following:
- Use CUSTOMER_H Customer Header Extensions for any new fields at the header level.
- Use CUSTOMER_I Customer Item Extensions for any new fields at the item level.
Unless you have a specific requirement to extend a segment of the transaction, I recommend placing all new fields in these segments. The CUSTOMER_H & CUSTOMER_I segments are considered "standard" segments, that are already built into all the necessary API structures.
Let me know if you have any further questions.
Good luck,
Stephen -
Granting Privileges on Objects and Workspace
Hi folks,
I'm a newbie using Workspace Manager and here is a basic question about granting privileges. I think that it's a little bit confused to me the concept regarding objects privileges versus workspace privileges.
Here is the scenario.
User A enable versioning in table TAB1
User A creates a workspace WKS1
User A grants workspace privileges to User B (ACESS, MERGE,....)
User B connects into the database and goto workspace WKS1
User B tries to select, insert, update data using TAB1 but got error that
table does not exist.
So, Should user A, previously, grant select, insert, update permission on table TAB1 to User B?
I understood that it was not necessary once user B would, in fact, access a view created by workspace manager and the privileges would be set using the GrantWorkspacePrivs function.
Regards,
LuisHi,
The object and workspace privileges are separate. You would need to grant access to user B for both the workspace and the table. The object permissions can be granted prior to executing dbms_wm.enableversioning or during a DDL session.
Regards,
Ben -
Listing objects and their instance names (of closed source SWF)
I have an API for a flash player that I want to use, but it is closed source. I know I could try a decompiler but I need to see what it loads and what it's doing at runtime.
I'd like to see the objects (and all their info) that it loads and has on stage along with thier instance names. I'd like to see what this SWF has/does so I can write my AS3 code accordingly... maybe add some additional event listeners.
Is there any was to go about doing this? I know there's some AS3 commands to get this information but I dont know what they are. If you all could give me some hints at which commands would be useful that would be great."I need to see what it loads"
You can use Fiddles, Charles or Firebug to monitor traffic (what it loads).
As for the rest of your question - good luck. Although it is possible to decompile swf of course, reverse engineering is an extremely complex time consuming task. In the majority of cases it is easier and faster to replicate functionality from scratch than to try to understand SWF's logic.
Unless you know packages structure - there is no native way to figure out/access application domain. -
Forms: object and process
We have two kind of forms. Object and process.
An object form is associated with a resource and a process form is associated with a process.
But, I still have a few doubts.
But what is the difference between them in functionality point of view. Where exactly does process form come into picture. Can we display it?
Where should we use which form?Each resource has an associated object and process form.
Object form is basically used when requesting a resource for provisioning for accepting data from user. Now before provisioning activity gets triggered, this data is passed to process form to execute provisioning tasks. The data flow/mapping between object and process form is done thr' Data Sink tab in process definition.
The permissions for both object and process form can be set in Form Designer->Object permissions tab.
Besides, the process form data can be "editted" for re-try process tasks that have failed/rejected.
Note: you can also have data pre-populated in process form thr' access policies. The same holds true for object form but having data pre-populated in process form makes more sense. This holds good when having provisioning of resources being triggered thr' role based access policies. -
How would i make an object and rotate it?
ok, i'm trying to get java to make a graphics object, and then create an array of said objects (basically just a bunch of rectangles organized into rows/columns) with the end goal being that i be able to put this collection of rectangles into a JPanel and then move it around and rotate it without changing its dimensions (so each rectangle in the collection retains the same height and width but with a different placement/orientation angle )
My java textbook (yes, college student) doesn't cover the Graphics2D stuff which SEEMS to be what i would use... but beyond that I'm finding the resources on the topic to be uniformly opaque. i think i just need some starting point to extrapolate from. could anyone reply me a crash course in the above...?import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Blocks extends JPanel {
Block[][] blocks;
int dx = 2;
int dy = 2;
public Blocks() {
registerKeys();
setFocusable(true);
protected void paintComponent(Graphics g) {
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
if(blocks == null) initBlocks();
g2.setPaint(Color.red);
for(int j = 0; j < blocks.length; j++)
for(int k = 0; k < blocks[j].length; k++)
blocks[j][k].draw(g2);
private void initBlocks() {
int rows = 6;
int cols = 3;
Dimension d = new Dimension(200, 200);
BlockMaker blockMaker = new BlockMaker(rows, cols, d);
blocks = blockMaker.getBlocks();
private void registerKeys() {
getInputMap().put(KeyStroke.getKeyStroke("UP"), "UP");
getActionMap().put("UP", up);
getInputMap().put(KeyStroke.getKeyStroke("LEFT"), "LEFT");
getActionMap().put("LEFT", left);
getInputMap().put(KeyStroke.getKeyStroke("DOWN"), "DOWN");
getActionMap().put("DOWN", down);
getInputMap().put(KeyStroke.getKeyStroke("RIGHT"), "RIGHT");
getActionMap().put("RIGHT", right);
private void step(int x, int y) {
for(int j = 0; j < blocks.length; j++)
for(int k = 0; k < blocks[j].length; k++)
blocks[j][k].move(x, y);
repaint();
private Action up = new AbstractAction() {
public void actionPerformed(ActionEvent e) {
step(0, -dy);
private Action left = new AbstractAction() {
public void actionPerformed(ActionEvent e) {
step(-dx, 0);
private Action down = new AbstractAction() {
public void actionPerformed(ActionEvent e) {
step(0, dy);
private Action right = new AbstractAction() {
public void actionPerformed(ActionEvent e) {
step(dx, 0);
public static void main(String[] args) {
Blocks blocks = new Blocks();
JFrame f = new JFrame();
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(blocks);
f.setSize(400,400);
f.setLocation(200,200);
f.setVisible(true);
class BlockMaker {
Block[][] blocks;
int PAD = 20;
public BlockMaker(int rows, int cols, Dimension size) {
int w = (size.width - (cols+1)*PAD)/cols;
int h = (size.height - (rows+1)*PAD)/rows;
blocks = new Block[rows][cols];
for(int j = 0; j < rows; j++) {
int y = PAD + j*(h + PAD);
for(int k = 0; k < cols; k++) {
int x = PAD + k*(w + PAD);
blocks[j][k] = new Block(x, y, w, h);
public Block[][] getBlocks() {
return blocks;
class Block {
int x;
int y;
int w;
int h;
public Block(int x, int y, int w, int h) {
this.x = x;
this.y = y;
this.w = w;
this.h = h;
protected void draw(Graphics2D g2) {
g2.drawRect(x, y, w, h);
protected void move(int dx, int dy) {
x += dx;
y += dy;
} -
Leasing object and leasing CAI component
what is leasing object and leasing CAI component?
where and when i've to use in CRM?
what are all the configuration settings/transaction code need for that.
anyone can explain to me? if possible could you send me the document. [email protected]
Thanx in advs,
dasLeasing object is basically the asset (or material or physical product or reference product) that is leased in CRM Leasing. In CRM, materials are created in transaction COMMPR01. These are generic products like LAPTOP or TRUCK. If you want to create more specific products (eg. using serial number or VIN number), then you can create Individual Objects (IObjects) based on the reference product. The object family used for leasing individual objects is 0311.
CAI stands for "Contract Added Pricing Implement". In CRM 5.0, you can find this under IMG -> CRM -> Financial Services -> Leasing -> Pricing -> CAI - Contract Added Pricing Implement. Here's the text copied from the IMG
"The CAI (Contract-Added pricing Implement) tool is used in the leasing scenario to calculate the conditions for pricing that cannot be calculated using standard pricing in IPC. These are conditions whose calculation requires the financial mathematics cash flow or information from predecessor documents. In the standard scenario, these are conditions that are needed in option valuation, such as the net present value of outstanding payments."
Note: If you are using a higher version of CRM for Leasing, you may not need CAI. -
Difference between abap object and function
hi all,
i read the book on abap object of the difference between abap object and classical abap.
i know that there is only 1 instance of a specific function group but somehow i still not so clear why subsequent vehicle cannot use the same function. i also can use the do and loop to call the function? if cannot then why?
hope can get the advice.
thanks
using function *********
function-pool vehicle.
data speed type i value 0.
function accelerate.
speed = speed + 1.
endfunction.
function show_speed.
write speed.
endfunction.
report xx.
start-of-selection.
*vehicle 1
call function 'accelerate'.
call function 'accelerate'.
call function 'show_speed'.
*vehicle 2
*vehicle 3
*****abap object*******
report xx.
data: ov type ref to vehicle,
ov_tab type table of ref to vehicle.
start-of-selection.
do 5 times.
create object ov.
append ov to ov_tab.
enddo.
loop at ov_tab into ov.
do sy-tabix times.
call method ov->accelerate.
enddo.
call method ov->show_speed.
endloop.Hi
Now try this:
REPORT ZTEST_VEHICLEOO .
PARAMETERS: P_CAR TYPE I,
P_READ TYPE I.
* CLASS vehicle DEFINITION
CLASS VEHICLE DEFINITION.
PUBLIC SECTION.
CLASS-DATA: MAX_SPEED TYPE I,
MAX_VEHICLE TYPE I,
NR_VEHICLES TYPE I.
CLASS-METHODS CLASS_CONSTRUCTOR.
METHODS CONSTRUCTOR.
METHODS ACCELERATE.
METHODS SHOW_SPEED.
METHODS GET_SPEED EXPORTING E_SPEED TYPE I.
PRIVATE SECTION.
DATA: SPEED TYPE I,
NR_VEHICLE TYPE I..
ENDCLASS.
* CLASS vehicle IMPLEMENTATION
CLASS VEHICLE IMPLEMENTATION.
METHOD CLASS_CONSTRUCTOR.
NR_VEHICLES = 0.
ENDMETHOD.
METHOD CONSTRUCTOR.
NR_VEHICLES = NR_VEHICLES + 1.
NR_VEHICLE = NR_VEHICLES.
ENDMETHOD.
METHOD ACCELERATE.
SPEED = SPEED + 1.
IF MAX_SPEED < SPEED.
MAX_SPEED = SPEED.
MAX_VEHICLE = NR_VEHICLE.
ENDIF.
ENDMETHOD.
METHOD SHOW_SPEED.
WRITE: / 'Speed of vehicle nr.', NR_VEHICLE, ':', SPEED.
ENDMETHOD.
METHOD GET_SPEED.
E_SPEED = SPEED.
ENDMETHOD.
ENDCLASS.
DATA: OV TYPE REF TO VEHICLE,
OV_TAB TYPE TABLE OF REF TO VEHICLE.
DATA: V_TIMES TYPE I,
FL_ACTION.
DATA: V_SPEED TYPE I.
START-OF-SELECTION.
DO P_CAR TIMES.
CREATE OBJECT OV.
APPEND OV TO OV_TAB.
ENDDO.
LOOP AT OV_TAB INTO OV.
IF FL_ACTION = SPACE.
FL_ACTION = 'X'.
V_TIMES = SY-TABIX * 2.
ELSE.
FL_ACTION = SPACE.
V_TIMES = SY-TABIX - 2.
ENDIF.
DO V_TIMES TIMES.
CALL METHOD OV->ACCELERATE.
ENDDO.
CALL METHOD OV->SHOW_SPEED.
ENDLOOP.
SKIP.
WRITE: / 'Higher speed', VEHICLE=>MAX_SPEED, 'for vehicle nr.',
VEHICLE=>MAX_VEHICLE.
SKIP.
READ TABLE OV_TAB INTO OV INDEX P_READ.
IF SY-SUBRC <> 0.
WRITE: 'No vehicle', P_READ.
ELSE.
CALL METHOD OV->GET_SPEED IMPORTING E_SPEED = V_SPEED.
WRITE: 'Speed of vehicle', P_READ, V_SPEED.
ENDIF.
Try to repeat this using a function group and I think you'll undestand because it'll be very hard to do it.
By only one function group how can u read the data of a certain vehicle?
Yes you can create in the function group an internal table where u store the data of every car: in this way u use the internal table like it was an instance, but you should consider here the example is very simple. Here we have only the speed as characteristic, but really we can have many complex characteristics.
Max
Maybe you are looking for
-
Can't print: "No Available Themes"
Using iPhoto 7.1.3 and OS 10.5.2, when I try to print a photo, I get an alert saying: "No Available Themes - There were no themes located. Until at least one theme has been installed, this feature will be unavailable." This isn't a book or a card. I'
-
Nokia N80 - iMac G5 BT transfer freezes at 263.9kb
Hi, Each time I try to transfer a large file from my Nokia N80 to my iMac G5 (OS X 10.4.6) using BlueTooth the upload freezes exactly at 263.9kb I have no problem with files which size is under 263.9 kb I've contacted Nokia regarding this issue and t
-
Trying to register MS Word 8.5 and Firefox says Invalid security certificate.
I tried to register MS Word 8.5 and got an error message from Firefox saying > Profile. microsoft.com uses an invalid security certificate. Error code:sec_error_unknown_issuer > I downloaded a patch that MS said I needed > kb933828 but it refuses to
-
Perl performance on solaris 10
hi all, i executed this (http://www.metacard.com/perlbench.html) script on solaris 10 and linux machine. Solaris box took around 15sec to complete the test where as linux box took only 8 seconds. Is there any way to increase the perfomance of perl on
-
Batching in sync read file adapter
Dear All, Is there any way we can do batching in sync read file adapter ? I am at SOA Server 10.1.3.4 MLR#5. Please share if any information. Best Regards Arc