"Time available for this call is..." message deactivation

I have unlimited talk. I have one device. I have one line. It is complete overkill to remind me before every single call is connected of this information. Is there any way deactivate this feature? I've tried screaming obscenities and threatening her family but she just won't quit. God forbid I should ever have to be the 10th caller for anything, I'll end up in therapy.
Thank you in advance,
D.

Log in to your account online and go to account profile then phone control and set to low. That will disable the annoying message or you can call customer service and try to get them to change the phone control to low. 
<<Comments edited to comply with Verizon Wireless Terms of Service >>

Similar Messages

  • How do i remove the message: "the time allowed for this call is unlimited?"

    I want delete the message that sounds when i call someone that says: the time allowed for this call is unlimited.

        johnnytitleist,
    Thanks for that information! I recommend reaching out to our Prepaid experts to assist with this message. You can reach them at 888-294-7937.
    SandyS_VZW
    Follow us on Twitter @VZWSupport

  • How do i get rid of the message "the time availiable for this call is" before every call

    How do i get rid of the message "the time availiable for this call is" before every call

        cheap.phone.owner,
    I understand you want to deactivate the message advising you of your balance every time you make a call. To obtain information about your Prepaid service, you may contact them by dialing "*611 SEND" from your wireless phone, or (888) 294-6804 from any phone, to speak with a Customer Service Representative.
    AdaS_VZW
    Follow us on Twitter at @VZWSupport

  • No Content available for this navigation node message after Portal Upgrade

    Hi,
    After Portal upgrade to 7.01 EHP1 SP7, when we are clicking on any role at the TLN, the Portal Content area is showing the message " No Content available for this navigation node". However before upgrade when we are clicking on any TLN role the content area used to show the first iview in the folder in the detailed navigation.
    Please help as we are in a very critical state.
    Best

    Ameya Pimpalgaonkar wrote:
    Hello Mahesh,
    >
    > Did  you happen to see this thread:
    >
    > Hide "No content available for this navigation node" message
    >
    > Ameya
    Hi Amiya,
    I already gone through this thread but iwe will get an empty page if we will change the value of default content to null in the Content Area iview. My requirement is to expand the folder in the detail navigation area and display the first iview in that folder in the content area whenever we click on any role in the TLN.
    Mahesh

  • "Preview not available for this file" error message.

    I'm using LR 4.4 but it hasn't worked correctly since I got my new camera (Canon 70D). When trying to import I keep getting the "Preview not available for this file" error message. I had some better luck connecting the camera with a usb cable, that let me see the jpg images, but it would not let me see the raw (.cr2) images. Would I solve this problem by upgrading to LR5?
    I'm running LR 4.4 on a Windows 7 PC.
    Thanks for any help that can be provided.
    Robert

    Support for the Canon 70D was introduced with LR version 5.2. see the link below.
    Camera Raw plug-in | Supported cameras

  • How do i turn off that recording that says the time left for this call is unlimited?

    I need to get rid of this annoying recording i get every time i dial a out going number.... " The time left for this call is unlimited"...
    can i get some advice???
    Anyone???

    I just want to say....THANK YOU!!!! to all of those who responded to my
    aid.
    i DID fix the issue.. via the 888 294-6804... followed the
    prompts..opitions 4... then opt. 2... then opt. 3... then opt. 1....then
    opt. to Low.    whaaala.
    Again THANK YOU !!!
    AWESOME>>>>
    On Wed, Feb 11, 2015 at 6:30 AM, tikibar1 <[email protected]>

  • Hide "No content available for this navigation node" message

    Hello everybody,
    we run EP7 SP022. We have a role with several BI reports / iViews. As long as the user selects no report the message "No content available for this navigation node" is shown. As far as I know this is standard behavoir but we'd like to hide this message.
    SAP note 1437667 says: "When navigating to a folder/workset/role which has no default content to be displayed, the content area should render the default content component which is configured at property "DefaultContent" in the content area iView. The default value for this property is:
    "pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.noContentMessage", which is the pcd location of SAP default content component."
    Does anybody know where the mentioned "content area iView" can be found, so that we could change the "DefaultContent" property ?
    Thank you in advance.
    Regards,
    Nikolaus

    Hi, hope this can help you
    In your portal navigation menu
    1.- Select the option content manage
    2.- Portal´s Content - select your node if you have it, if not select content avaliable for sap.
    3.- Content for final user
    4.- Portal standar users
    5.- Standar Framework Page . open this object
    5.1 .-Select internal area of desktop open it.
    5.2.- Select option content area and open it.
    5.3.- In property category on combo box, select show all by category.
    6 .- Search Default Content field and erase this content pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.noContentMessage
    Save the changes.

  • I've been trying to update my apps, and each time I press update, this message pops up: This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

    The same message pops up for apps I have yet to download. I was able to update all my apps yesterday, but now, I can't even download new apps on my iPhone 5 and my 5th generation iPod Touch.
    Thanks.

    Did Apple get this sorted for you? Same problem for my new purchase "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled". Only purchased 3 days ago (and have loaded Yosemite) and have definitely not sold, cancelled or received any refund (very happy with the product).

  • First call attempt fails with 12000; reason="Routes available for this request but no available gateway at this point"

    We've installed a new Audiocodes Mediant 1000B gateway for our customer.  They only have about 6 users enabled for Enterprise voice and using Lync for all calls.  They have an intermittent problem whereby the first call attempt to a number on the
    PSTN fails with 12000; reason="Routes available for this request but no available gateway at this point".  There is only one PSTN gateway installed.  All routes point to this gateway.  What I found initially is that the calls
    were failing after 10 seconds which is the default "failovertimeout" in the OutboundRouting.exe.config.  I found this post http://voipnorm.blogspot.co.uk/2012/06/lync-2010-gateway-timeout-call-failures.html and
    changed the value to 20 seconds.  Subsequent failures failed after 20 seconds (the new value).  The interesting thing is that the second attempt even a couple of seconds later succeeds.  My Lync server event log has 46046 "A call to a PSTN
    number failed due to non availability of gateways." for the failed call and 46047 "A PBX gateway is now responding to requests after some failures." for the successful call moments later.
    My environment is Lync 2010.  A single enterprise edition Front End with collocated mediation.  The server is virtual and in a different physical location to the gateway.  The two sites are connected via a LES1000.  The RTT between the
    sites is very low so it isn't necessarily networking.
    In the Syslog output on the Audiocodes we don't see the call even reach the gateway.  It's likely that Lync has simply marked the gateway as down and doesn't route the first call.  Then it wakes up and marks it as up and routes the next call.
    Update wise I'm on 4.0.7577.183, 199 and 217 for those that are up to date and the only components that are behind say that 223 is available.  Those being Core Components, Lync Server, Conferencing Server and Web Components.
    As I said, this is intermittent, apparently doesn't happen for every user (which I don't buy), but is easily replicated on request.
    I definitely think changing the failovertimeout value has reduced the number of failures.  But realistically I don't want users sitting there for 20 seconds before their call fails.  Or 19 seconds for the call to route.
    I've found a few posts on this and similar issues.  I don't get the 25051 or 25052 errors.
    Any help gratefully appreciated.
    Regards
    Randy Chapman
    Best Regards Randy Chapman

    Try to change the value of Failovertimeout to 1000.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Just bought new Macbook Pro, can't download updates because of this message:This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

    Mac app store will not download updates because of error message

    Hi,
    I also am getting this message. I bought my 15" mac book pro mid 2010 and at the same time purchased iWork. It is not showing in my purchases on Apple ID, I have never changed my Apple ID since purchase. Why would my Apps not show. There are some there but mostly free ones. I checked it under the Store menu after signing in.
    After upgrading from Mountain Lion to Yosemite  my iPhoto, iMovie, Keynote,Pages and Numbers need to update. But I get this message.
    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    I have not changed ownership or Apple ID on my mid 2010 Mac Book Pro since purchase. What would cause this?

  • HT1766 Hello I am trying to update my viber, as i pressed update icon the message appeared "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or camcelled" what does it mean

    Hello I am trying to update my viber, as i pressed update icon the message appeared "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or camcelled" what does it mean?

    iTunes issue ,Apple are working on it
    solutions in thids thread seem to resolve for some
    https://discussions.apple.com/message/25722716#25722716
    Appears to be linked to having changed iTunes Store Country at some time in past

  • After updating to Mavericks the apps store gives me the message "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."  How do I still update my apps??

    After updating to Mavericks the apps store gives me the message "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."  How do I still update apps such as iphoto??

    What happened was you never accepted these apps into your Mac App Store account.
    Drag & drop the apps in the Trash and use OS X Recovery to install them again. after installing the apps be sure to accept them into your account this time from the Purchases pane of the Mac App Store.
    OS X Recovery -
    http://support.apple.com/kb/HT4718

  • When I try to update my iPhoto I received a message....This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

    I need to update my iPhoto apps ignored to open my iPhoto.  Every time I attempt to download the new app I receive this message ( This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. ) This started to happen only when I updated my Mac system to OS Yosemite.

    Open the Mac App Store's Purchases tab.
    If you're prompted to accept it into your Apple ID, do so and try again.
    If not, temporarily move it out of the Applications folder and try downloading a fresh copy. If you get asked to buy it, choose not to, click here, and contact Apple.
    (116052)

  • Problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
    This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
    Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
    If iPhoto  is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
    http://www.apple.com/support/mac/app-store/contact/

  • Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

    macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. 

    I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
    This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
    After making your backup try the following:
    Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
    Launch the App Store, click the "Store" menu, and sign in with your AppleID.
    Open the main page of the App Store and search for iPhoto.
    If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
    If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

Maybe you are looking for