Time Machine multiple Target disks

Hi I have a similar problem
I have two Internal dirves, the OS on my first Internal 250gb SSD and my IPhoto and IMove and Applications on my second Internal 2TB HDD
I would like to backup both of these drives to my External 4TB backuo drive.
Currently Time machine is only backing up the First SSD, How do I select the second 2TB HDD for Time Machine to use as a target for back as well ?

Thanks for the Link !
But I am having trouble on finding exactly how you do this, there seems to be no option to select a target disk in Time machine.
Is there a link that shows you how to set the target disk ?
Thanks in advance

Similar Messages

  • Backup w/ Time Machine via Target Disk Mode?

    So here's my situation, my computer is stuck on the grey screen of death, but it mounts fine in Target Disk Mode. Its been about 2 weeks since my last Time Machine backup, so I would like to recover the last two weeks of files. If I can do that, then I'll just wipe the HD and start with a fresh install, however, since I can't get it to start up, is it possible to backup my computer to my Time Machine backup using Target Disk Mode through my wife's computer? Any help is appreciated.
    (If not, then is it possible to run a time machine backup from single user mode?)
    Here's basically what I'm talking about:
    MBP (Target Disk Mode) > Wife's MacBook > External HD (Time Machine Backup)

    That may work, but you'll get a whole new, full backup, identified as belonging to the MacBook (since that's where TM would run, and the MBP would look like an external HD.)  Unless you exclude it, you'd also get the internal HD on the MacBook. So it will require a lot of space and time.
    There's no way to fool it into making an incremental backup.
    Or, use the same setup, but make a "clone" on a separate HD or partition, via the Restore tab of DIsk Utility, or one of the "cloning" apps: CarbonCopyCloner or SuperDuper. 

  • My newish MacBook Air was just lost to a coffee spill, and I need to migrate back to my MacBook Pro using a recent back-up (Time Machine to external disk).  Can I do this?

    My newish MacBook Air was just lost to a coffee spill, and I need to migrate back to my MacBook Pro using a recent back-up (Time Machine to external disk) for a few weeks.  This same disk was used to back-up the Pro earlier, and to migrate from the Pro to the Air.  Can I do this "back-migration" from the Air to the Pro?  Is it maybe better just to migrate the specific folders (Outlook email, Office docs) I am sure I need?

    Do not attempt to copy files/folders from a Time Machine backup. Only use the Time Machine application to restore from the backup.
    Click on a Finder window and select Help from the Finder's Help menu. Search for "restore" and select "restore items backed up with time machine" from the hints list. You will find these two articles:
    Recover items using Time Machine and Spotlight
    If you use Time Machine to back up your Mac, you can use Time Machine with Spotlight to recover lost or deleted items.
    Note: You can retrieve earlier versions of TextEdit documents from within TextEdit. For more information, see: 
    View and restore past versions of documents
    Open a Finder window and type a search word or phrase in the search field in the upper-right corner.
    Select a location to search in the location bar.
    Refine the results by specifying search criteria. Narrow down Spotlight search results
    Open the Time Machine menu in the menu bar, then choose Enter Time Machine.
    Use the arrows and timeline to browse the Time Machine backups. Your search is performed in every window.
    When you find the item you want to restore, select it, then click Restore.
    The restored item is returned to its original location. For example, if the item was found in the Documents folder, it’s returned to the Documents folder.
    Restore items backed up with Time Machine
    If you use Time Machine to back up your Mac, you can easily bring back lost items or recover older versions of files.
    You can use Time Machine within many apps. If the iCloud Documents & Data feature is turned on, you can recover older versions of iCloud documents as well as regular documents.
    Open a window for the item you want to restore.For example, if you accidentally deleted a file from your Documents folder, open the Documents folder. To recover an email message, open your inbox in Mail. To recover an iCloud document, open the document’s app, choose File > Open, then click iCloud to view the iCloud documents for that app.If you’re missing an item from the desktop, you don’t need to open a window.
    From the Time Machine menu in the menu bar, choose Enter Time Machine. A message may appear while your Mac connects to the backup disk.
    Use the arrows and timeline to browse the snapshots and backups.White tick marks represent snapshots stored on your internal drive (portable computers only). Pink tick marks represent backups stored on your backup disk. If a tick mark appears dimmed or grayed, there’s no backup available or the backup disk is not connected.
    For more information about an item, double-click it.The windows in Time Machine behave just like Finder windows, so you can open folders, click items in the sidebar, and use the search field in the upper-right corner of the window.
    When you find the item you want to restore, select it, then click Restore. You can restore individual items, multiple items, folders, or your entire hard disk.The restored item is returned to its original location. For example, if the item was found in the Documents folder, it is returned to the Documents folder.

  • Does Time Machine back up disk information in addition to all files?

    Hi
      I want to know if Time Machine back up disk information of my current Apple computer.
      These information may include GUID/Apple Partition Map (such as partition names and layout). I check my backups in the Time Capsule, and it seems that only files in the hard drive have been backed up. I kind of know Partition Map doesn't reside in files, but hidden in the hard drive, so I wander if Time Machine does back up them? If so, where are they?
      Thank you in advance!

    DavidCQ wrote:
    Thank you for your information! It seems that Time Machine can only do with Apple OS, and for other OS such as Windows , we need use other tools.
    If it's Windows as a guest in a virtual machine, the backing file will get archived.  That's certainly a backup, but a woefully inefficient one as it'll drag the whole backing file out each time.  Most folks will thus disable that file in Time Machine.
    If it's Windows via Boot Camp or Linux in a GPT partition, that'll require using Windows- or Linux-focused tools. 
    One of the few available OS-agnostic approaches for backing up data is a disk image.   Time Machine is not an OS-agnostic backup tool.
    As for Windows or Linux or OS X or most any other operating system, each has its own tools and requirements for performing an operating system backup and for recovering and restoring, and it's very rare for any other operating system around really has any clue what those requirements are for a given OS.

  • Time Machine:The backup disk ran out of space unexpectedly. .....

    Hi,
    I upgraded to Mountain Lion when it was released and yesterday I began getting this notice from Time Machine:
    "The backup disk ran out of space unexpectedly. Time Machine will try to make more space available by removing expired backups during the next scheduled backup."
    I have a one terra external hard drive with exclusively Time Machine.  It says it has 3.4 gigabytes available, but isn't deleting old backups and making room for new, like before.  I tried the "encrypting" solution, but it still keeps on giving me this message.  Should I erase and format?  If so, what option should I chose to format?
    My Hard Drive has 240 gigabytes, so 1Tb should be more than enough.
    Thank you!
    Gloria

    SuperDuper and Time Machine are two completely different backup utilities. If you want something like what SuperDuper does then don't use Time Machine. You have many other options that won't use up all the space on your backup drive:
    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    Synk Pro
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    Do the following to erase your drive:
    Erase a Drive
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

  • "Your Time Machine back up disk cannot be found." What does this mean?

    I have an external hard drive that has never been disconnected from my iMac.
    About 3 weeks ago, I started noticing that some of my iTunes library songs had "!" in front of them, and I wasn't able to find them to play.  Over time, more and more iTunes songs had this problem.  Someone recommended that I look in the hard drive library, for individual titles, and sure enough, there they were!  I've been dragging them back to iTunes but this is going to take forever, because I'm a music teacher and I have a lot of songs in my library.
    In this process, I decided to see if the songs were still on the external hard drive, the Time Machine.  However, I get the message "your time machine back up disk cannot be found."  I have no idea what this must mean, because the Time Machine has been plugged in for a couple of years now.  But somehow, the computer doesn't recognize it any more.
    Are the two problems related?  And what should I do?

    There is no relation.
    Time Machine backups : my opinion is that this is a real waste of disk space, usefull for a few number of files but that's all ! In case of a reinstallation, everyone is performing a fresh installation ... In addition, after a certain time, TM erases the oldest files.
    I personnaly backup only on mediums (CDs, DVDs, DVDs) etc ... then i'm always sure to find again what i'm searching for.
    iTunes : a "!" means that you have moved from one place to another an audio file (or erasing it by error) and iTunes has just stored a link to the file and not the file inside its own folders. Probably you have never consolidated you library. The question is : where are you storing your files ? inside your mac plus inside external drives ? Please make sure, if you are managing often files in iTunes, to consolidate them in order for iTunes to copy them inside its own folders, else it becomes quickly a nightmare.
    iTunes manages files on 3 different ways now :
    - real files inside it
    - links to files out of its folders
    - files from iTunesMatch

  • "Time machine error, The disk image cannot be mounted" What can I do??

    I ran the time machine. Then, "preparing backup" showed up for a long time. After that, a window pop out: "Time machine error, The disk image cannot be mounted" What is disk image? What can I do (I can't back up anything)
    P.S. I use time capsule for backup. there were no problem on connection

    I'm having the same issue. I do not have TC as my base station. It says right in the book that if you choose, you do not have to have it run as your router, just as a part of your existing wireless network. All software is up to date and I have already shortened the name of both my TC and TC disc to 6 characters and no spaces! I've already spoken with someone today about this. He really didn't know. Have tried backing up both wirelessly and directly connecting with an Ethernet cord. I had to finally call because when I attempted to register the product to get online support, apple.com didn't recognize the serial number!!! The gentleman on the phone got it registered for me. I bought the TC from an official apple store and for whatever reason when he put in the serial number his computer said that this TC was so "old" I guess that there was technically "no support." That basically means that even though my parents just purchased this for me a week before Christmas, that it was made a year ago and the warranty is not good?? I need to do more research on that. Right now I am very unhappy about this. I am a firm apple user and have been for years, but this is frustrating.
    I had read somewhere else (not sure I've been searching apple for what seems like forever now) to make sure that the TC was showing up in "devices" of the Finder. Mine doesn't show up there, but rather in the "Network" window. Is this an issue? If it is, can anyone tell me how to fix that. I have Time Machine backing up to my TC, so I do not see why it would be.
    UPDATE: I just opened up my TC on the "Shared" section of the Finder window and deleted the old "sparsebundle" (I had no clue that anything had backed up way back at 3:30pm on Dec 29) and now I get a slightly new message: Time Machine Error: The backup disc image could not be created." So now the word "mounted" is replaced with "created." This error showed up a lot sooner than the original one. Ok, no clue. I am going to try to Change the Disc again, and try again. I will post another update.
    Message was edited by: kryzma

  • Why is Time machine saying backup disk disconnected? Using MBP 17" Lion 10.7

    Why is Time machine saying backup disk disconnected? Using MBP 17" Lion 10.7

    Do you have an external drive connected?
    If you do has it gone into sleep mode? There is a setting in the OS to put drives to sleep if they aren't being used. Energy Saver "Put the hard disk to sleep when possible".
    Also most external drives have a built in sleep function that if they aren't being accessed for a period of time they go to sleep by themselves.

  • I got this error while my mac was backing up to time machine: he backup disk image "/Volumes/Data/Sanjeev's iMac.sparsebundle" could not be created (error (null)). Please could someone help

    I got this error while my mac was backing up to time machine: he backup disk image “/Volumes/Data/Sanjeev’s iMac.sparsebundle” could not be created (error (null)). Please could someone help

    Has the backup been working ok??
    If that is the case simply reboot the TC.. or if that fails, reboot the whole network, restarting in correct order..
    modem.. wait 2min
    TC.. wait 2min

  • I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme   ??

    I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme   ??

    The first important thing to consider here is that Apple does not support Time Machine backups to a drive at the USB port on the AirPort Extreme, so that may likely have something to do with your difficulties.
    If you want to continue to try this, the drive must be formatted in Mac OS Extended (Journaled) and you almost always have to use a powered USB hub with a drive at the port of the Extreme...even if the hard drive has its own power supply....because the port on the Extreme is under powered.
    Most users who try this unsupported method have corruption difficulties sooner or later, but we do hear from some users who seem to be able to make it work.
    The bottom line is that there is no support from Apple on this if you have difficulties, so you may want to consider a secondary backup plan for your important data.

  • Time Machine Volume and Disk Utility

    I'm trying to figure out whether or not I can use Disk Utility's Repair Disk command on a Time Machine volume. Time machine is taking a very long time to finalize its backups. I don't know if there are directory issues that need to be addressed or if it's due to the very large size of the directory. I've been using Time Machine on this computer since last January and the Time Machine directory (the disk's catalog of files used by the OS) takes up over 7 GB of disk space! It's so large that DiskWarrior will no longer work on that volume. DiskWarrior, like all 32-bit OS X applications, has a limit of 4 GB. I can't be the only one in this situation. I don't want my Time Machine backup to get hopelessly corrupted and then have to start agin. I'm trying to be proactive about correcting any issues before they become serious.

    See my reply to Steve Darden in this Topic.
    You should not use Disk Utility in the normal manner. Time Machine uses hard links in a non-standard manner, which will cause normal repair utilities to complain, as Steve is finding.
    If you read Time Machine: Troubleshooting backup issues you will see that it only recommends Disk Utility to "Attempt to repair the backup sparsebundle", not the actual Disk Volume itself.

  • "Can't connect to a current Time Machine back up disk"

    OS X Yosemite, version 10.10.1
    Macbook Pro (Retina, 13-inch, Late 2013)
    Processor 2.6 GHz Intel Core i5
    Memory 8 GB 1600 MHz DDR3
    Computer is supposed to seamlessly back up to Time Capsule via wi-fi, but ever since upgrading to Yosemite it's been broken.  "can't connect to a current Time Machine back up disk"  is the message that pops up, just after it shows me the files on my Time Machine for a split second.  So it sees them, for a moment, then it pops up the message and freezes my computer.  I have to do a hard reboot.  I tried the instructions here: OS X Yosemite: If Time Machine can’t find your backup disk,  and various instructions I've found on the internet regarding fixes from deleting plist files to whatever. 
    This is very annoying, I'd like to fix the problem.  And also vent, this *****, this isn't why I purchase Apple products, it's a known problem and they aren't publishing a fix.  Apple isn't very elegant anymore, it's cumbersome, troublesome, and I'm wondering why I'm spending the extra when those were the benefits I was paying for.

    Apple isn't very elegant anymore, it's cumbersome, troublesome, and I'm wondering why I'm spending the extra when those were the benefits I was paying for.
    Don't upgrade next time until the following version is out.. I updated not long ago to Mountain Lion.. and it works very nicely. Apple is playing MS game.. don't fix the problems.. just release a new fangled OS. So issues that have existed over Mavericks and all its updates are still there and in fact exacerbated in Yosemite.
    To fix your issue.. You may need to do some major work.. did you upgrade or clean install Yosemite??
    I guess it is too much to ask if you still have your previous OS install intact?? Making a bootable clone before updating is a necessity now IMHO.
    TM does not really allow you to go back to the previous OS.. but you can clean install Mavericks or whatever you used and then recover your files.
    To fix Yosemite a clean install can be a big help. Especially as wireless is a major flaw.
    Do you own the thunderbolt to ethernet adapter? It is like $35 and a well worthwhile gadget to own.. since I think your mac has no ethernet port.
    See if it works ok by ethernet.
    Otherwise factory reset the TC and try mounting it manually in finder by IP address, not name.
    ie in Finder use Go, Connect to server and type in the IP.. thusly
    SMB://10.0.1.1 (replace with actual IP)
    It is a bit tricky if the IP is not static.. but start there and see what happens.
    Remember to save the password to the TC in the keychain when asked.

  • Time Machine error: backup disk image could not be created

    Iet up my new time capsule day and it's working great. Now that I've got everything sorted out, I'm ready to do the initial time machine back up on it. I went into preferences, changed the backup location to my TC and clicked 'back up now'. Very quickly I get a message that the backup failed: "Time Machine Error - The backup disk image could not be created".
    I've searched the apple support area but haven't been able to figure this one out. Can anyone help, please? This is an initial backup. (FYI, it worked great on my old external drive.)
    Many thanks

    I had the same problem. I installed my Time Capsule, fired up Time Machine and got an error that said "The backup is too large for the backup volume. The backup requires 436.8 GB but only 182.2GB are available."
    Coincidently, these are the same sizes as the space used and the space available on my iMac's drive.
    I looked in /Volumes and saw that the sparsebundle was being created on the local disk and not on the main disk. Trying to backup again gave me the "Time Machine error: backup disk image could not be created." message.
    I poked around the forums, and found a post about the machine name setting in sharing. I decided to give it a look, and lo and behold, I did not have a machine name. So I gave my box a name, kicked off Time Machine again, and it worked.

  • Can I encrypt the time machine back up disk?

    I have about 62GB on my time machine back up disk. It just occured to me that anybody who gets a hold of my back up disk, has all my info. Is there anyway to encrypt the back up disk, and password protect it?
    If there is will I still be able to use this back up in case of data loss from my computer?
    Thanks.

    You can't restore a Time Machine backup made with Snow Leopard onto a system with Tiger. You can, but you will damage Mac OS X.
    In order to restore your Time Machine backup, you should have your Snow Leopard disc. Then, insert it and hold the C key while your MacBook Pro is starting. Finally, choose your language, go to Utilities menu (on the menu bar), choose the option to restore the backup and follow its steps, so you will recover Mac OS X Snow Leopard

  • Can I access files copied to this machine in target disk mode from this machine?

    Can I access files copied to this machine in target disk mode from this machine?

    HI Claire,
    YOu didn't indicate which Mac OS you are using so I'm going to assume 10.4.x.
    Connect the FireWire cable to the target computer after starting it up in FireWire Target Disk Mode.
    *If the cable was already connected, unplugging it from either computer and plugging it back in should allow the target computer's hard disk to appear on the host.*
    Also, make sure you have the most recent Firmware for your iBook... go here:
    http://support.apple.com/kb/HT1471?viewlocale=en_US
    Carolyn

Maybe you are looking for

  • M1217mfw with readiris device not installing correctly

    I run Win7/64 bit.  M1217nfw device.  trying to download Readiris.  It downloaded (4 times actually) and each time hangs on setting the scanner.   I tried reinstalling my printer (don't have the CD, but downloaded and installed M1210 series printer s

  • Software Update no longer works (file not found on server)

    I just tried the first "Software Update ..." since installing 10.6. There are the 10.6.1 update, a new iTunes, some HP Printer Driver update, and a Remote Desktop Update. The download fails with The update "HP Printer Drivers Update" can't be install

  • Why are my raw files being changed?

    If I make changes in the Camera Raw window (i.e. change the exposure) and then "Open" it in Elements from the window, it applys those changes to the raw file, but the manual says "To open a copy of the camera raw image file (with the camera raw setti

  • Finder crashes after recent updates

    After authorizing one recent automatic security and one quicktime update, the system boots, desktop and dock work fine but finder crashes and won't allow a relaunch. I get the rainbow spinner and the clock in the upper right for a few seconds and the

  • M-Audio Profire/AKG mic... LOW volume! Power issues?

    Hey guys, desperately need some help here. So I've got an M-Audio Profire 610 interface, using an AKG Perception 200 condenser mic. I am having issues with REALLY LOW VOLUME! And I'm pretty positive I have everything setup correctly. XLR to XLR mic c