Time of range
Hello
I have a need, and I have a infobjeto having a range of time, and placed in the query designer that infobjeto line level so that it can be displayed in the report the number of transactions that are there for each time range, but I run the report in bex analyzer and realize that only shows me the time ranges that have data, but I need to show all ranges of time even without data in some time ranges.
In the master data that infobjeto are all ranges of time which was done by deriving an hour abap.
As I can to do in the report show all ranges of time even without data according to the consultation on the report parameter inputs?
Greetings.
nando
Hello
I already did, but I do not work, only shows me the ranges that have transactional data.
What else I can do?
Greetings.
Nando.
Similar Messages
-
Airport express / extreme / Time Capsule Range
Airport express / extreme / Time Capsule Range
Can anyone please tell me what is the approximate range of Apple Airport Products.
While doing sell in Apple store customer always ask us this question and we don't had any answer for it.
So please if anyone has the answer do reply on this.
- - - Akshay k. (ACMT)The range is about 50 meters or 150 feet.....but this assumes that the AirPort is being used in a very large open space like a aircraft hangar.....with no obstructions in the signal path.
Chances are, your home is laid out a bit differently, so without knowing a number of variable factors like.....
1) How many walls there will be in the signal path between wireless devices
2) The actual construction type of the walls, ceilings, etc
3) Heavy furniture, large mirrors, etc. in the signal path
4 ) Other wireless networks around your home
5) Other wireless devices like cordless phones, BlueTooth devices, etc.
It would be impossible to tell you what the actual range might be in your home.
In general, assuming normal modern home construction, you would not want the wireless signal to pass through more than 2 or 3 walls....since each wall will absorb on average about 15-25% of the wireless signal. A ceiling will absorb even more because of its thickness. -
Time Capsule Range Extension With Linksys?
I just bought a new Time Capsule to enable family automated back-ups and networked storage. I replaced a Linksys router as the main router for the house and now I have lost wifi range - particularly in the room where we sit to stream video!! I don't have another cable connection in the house to add another router unfortunately. Is there a way I could use my linksys router to wireelssly extend the Time Capsule range? If so - can anyone point me to a layman's guide for setting this up? I have searched the forums but the basics don't seem to be available. Thanks in advance for any help.
The answer is basically no, Apple make their routers to work with Apple routers.. and all others are excluded from the club.
But do you know how many models Linksys make? Over the years it must come to several hundred. Apple make 3 routers.. so it is kind of easy.. and they all play nicely together. Linksys makes/made hundreds and they don't even work with each other let alone every other brand.
To work with Apple router it will need universal repeater mode.. this is almost never available in Linksys firmware. But third party firmware like dd-wrt will sometimes work.
Check the listing if your model linksys works. http://www.dd-wrt.com/wiki/index.php/Supported_Devices
Overall though universal repeater is not the best way to do things. It is not particularly stable or fast because all packets are double handled.. being received and retransmitted.. halves the speed.
So the easy way to fix the problem is another apple router.. it will slot in without any hassles and extend wireless.
That is still slower than direct wireless, because it still double hops the wireless.
So other solutions.
1. Wire it.. even if you don't have another cable connection now.. to stream video ethernet is the winner hands down. Nothing else comes close.
2. HomePlug or what we call EOP adapters. Send ethernet over power. These work better than wireless if you have same circuit or even via a fuse box.. they can be slow if the house uses breakers instead of fuses.. they require direct power point connection.. and single phase.. but if it does work, it is stable and doesn't drop out and change from day to day the way wireless does.
3. If the Linksys was working ok and you could stream over wireless to the areas you needed it. Then clearly the TC is not the right product for you or it is in the wrong role. Put the Linksys back as the main router and bridge the TC to it.. so it no longer is main router, but simply another WAP and network switch.. It can still do TM backups fine.
4. Alternatively setup the Linksys as a secondary WAP plugged into the TC by ethernet. It is good to space them a few feet apart.. so get a decent length ethernet patch cord and run the linksys in WAP mode if it has one.. or wan bypass if it doesn't. All wireless routers effectively can work as merely a WAP. (wireless access point) Set the IP address correctly .. for example plugged into a TC at default, set linksys to 10.0.1.250 and turn off dhcp. Plug LAN to LAN. Then you can set a fixed channel for wireless say 11, and leave the TC to use one of the other channels.
I can give more info if you need on setup of either of these. -
Calculating fractions of hours from time date range
Hello friends,
I'm using sql server 2008 r2 and I have a table called attendance with the following fields
attendance_no int
attendance_date date
attendance_timein time(7)
attendance_timeout time(7)
emp_id int
and another table called employee with the following fields
emp_id int
emp_name varchar(50)
emp_tel varchar(50)
I need to calculate the total minutes worked as well as total hours worked for each employee with in a specified date range and I created the below query which working fine but it is not calculating the fractions of hours, I mean when an employee works
for example 7 and half hours, its showing just 7 hours instead of 7.5 hours.
SELECT a.attendance_date As 'Date',e.emp_id As 'ID',e.emp_name As 'Name',e.emp_tel As 'Telephone',left(a.attendance_timein,8)[Time in],left(a.attendance_timeout,8)[Time out],
+ CAST(DATEDIFF(second, attendance_timein, attendance_timeout) / 60 AS NVARCHAR(50)) As 'Total minutes',
CAST(DATEDIFF(second,attendance_timein,attendance_timeout) / 60 /60 % 60 AS NVARCHAR(50)) As 'Total hours'
from attendance a join employee e on e.emp_id=a.emp_id and a.attendance_date between '2014-11-06' and '2014-11-08' and e.emp_tel='65098009'
I would appreciate any help about this.
Thanks in advance
MohamoudIf I understand correctly, according to
Mohamoud's data sample, there is already Total minutes in the input (the above
table Mohamoud posted)
and all he need is a simple convert to decimal and the divided by 60.
select [Total minutes] / 60.c
Mohamoud,
is that correct?
The result show that you might need some rounding. for example 31/60 is 0.516666 while you show us 0.5
Please clarify if you need rounding and how many characters after the dot you need (this can be done using declaring decimal(x,y), converting, or multipla and using floor function, etc')
Ronen Ariely
[Personal Site] [Blog] [Facebook] -
Suddenly after a year my TC 500GB router will not extend range into my basement. 7:43pm, full strength in the basement, then 7:44pm no bars. No clue why. Have done a soft and hard reset and reset the router settings.
Any help? I was thinking of using an Airport Express to extend the range, but if my laptop can't pickup the router downstairs, how will the Airport Express pick it up?If you did decide to use an AirPort Express (AX) to extend the range, you would need to place it in a location somewhere closer to the Time Capsule where it would continually receive a good signal.
-
Airport Express extending Time Capsule Range
I have a fairly old Airport Express. 2-3 years old. Does this mean its not possible to extend the range on my Time Capsule running as main wireless? I just want to extend the range, but tried to join the network my Time Capsule was running (while backing up my Macbook Pro).
I'm wondering, was it unable to join because my Time Capsule was currently backing up files? Or is it unable to do so because of the 802.11n (or lack thereof).
Hope this makes some sense. ThanksYou can extend the wireless range of the Time Capsule (TC) with the older 802.11g AirPort base stations in a configuration known as a Wireless Distribution System (WDS). However, note that the new combined network will only operate in the 802.11g radio mode.
Here are the basic steps in configuring a WDS with these two devices:
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs for each of the base stations to be used in the WDS.)
o Perform a "hard" reset on the Time Capsule (TC) and a "factory default" reset on the 802.11b/g AirPort Express Base Station (AX).
Main Base Station Setup - TC
o Click the AirPort status menu in the menu bar and choose the wireless network created by the TC.
o Open AirPort Utility.
o Select the TC, and then, choose Manual Setup from the Base
Station menu.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the AX.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - AX
o Click the AirPort status menu in the menu bar and choose the wireless network created by the AX.
o Open AirPort Utility.
o Select the AX, and then, choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks.) -
What is the best way to extend time capsule range?
Hello there:
I was wondering what kind of set up do people have in their house to ensure a good coverage all around the house? I've tried several options and none seems to work correctly. I've tried Time capsule + airport base, I've tried two time capsules, but didn't get too far.
Thoughts?Do you get good coverage all around your house? how big is your house?
The size of the house is not really the issue nearly as much as the obstructions in the signal path. For example, a wireless signal will easily travel 100 feet with no obstructions slowing down the signal.
A "typical" wall of sheetrock and 2 x 4s in a home will on average, absorb about 15-20% of the signal. So, with 3-4 walls in the signal path, it is not hard to understand why a signal will likely be much weaker at the other end of the house, or at the point where you add an "extending" device.
A ceiling is usually about twice the thickness of an average wall or more, so you'll have to take that into account as well if you have multiple stories.
The "extending" device can only repeat the signal that it receives, so if it gets a weak signal, it "extends" a weak signal.
The "best" way to extend is connect the two wireless devices using an Ethernet cable, which may not be easy depending on the construction of the home, but it is by far, the "best" way to provide more wireless coverage to remote areas that need it. -
Airport extreme to extend time capsule range - performance degradation
I have a time capsule - had no wireless coverage on my patio. Installed an extreme base station as an extender and the good news is I now have coverage on my patio. Bad news is the performance in my office went from good to bad. Office had thruput of 5Mb per sec before installing the extender to around 300Kb per second after installing the extreme base station as an extender. When I unplug the extreme base station performance in the office goes back to good - 5Mb per second. Of course when I unplug extreme base station I lose coverage on the patio. I thought the network on my mac book pro would pick the transmitter with the strongest signal. When moving to the office I would restart the MACbook PRO to make sure it wasn't still using the same transmitter as when I moved to patio to office. The workaround is to leave the extender unplugged unless I am on the patio - an ugly kludge. Any insight help will be greatly appreciated.
Thanks,
MikeThanks for all your help and the explanations.
Not looking to beat a dead horse - everything is working to my satisfaction but but my head is spinning on some of this stuff.
Originally on the TC 'Radio Mode' was set to '802.11n (802.11b/g compatible)'.
I changed it to '802.11n only (5Ghz)'. That resolved my issues and I am very happy about that.
Per your post the iphone was not 802.11n capable and my poking around on GOOGLE seems to confirm that.
However, my iphone 3g looks like it is utilizing my wireless network. I see a fan icon vs. 3g icon. When I first take the iphone off sleep, the icon is 3g but it changes to the fan icon. I can confirm it is using my wireless network through an application. The app is IPOD keeper which syncs my passwords. It shows it is picking up an DHCP ip address and port number from my private wireless network. 192.168.2.xxx.
My wife has a first gen iphone and an Ipad - she is out of town and I can't test those devices. If the first gen iphone can't utilize the wireless network - no big deal - it's simply a phone for her. Hopefully the Ipad will work - that is a big deal for her.
I'm always trying to learn and appreciate your time and help. -
So I'm moving into a new apartment where my roommate currently has his first generation Time Capsule set up. The place isn't huge by any means (in downtown Seattle), but is two stories. The Time Capsule's network doesn't even reach downstairs (its set up in his room - and again this is a fairly small apt). Both upstairs and down stairs you can access a dozen of other networks from the building - so it seems like the Time Capsules should reach that far.
I updated the software and firmware, and that is all good to go. I tried the diffferent settings - 2.4ghz, 5 ghz, n only, n with b/g compatibility, etc, all no luck. Also tried switching the channel from Automatic to 5, thinking maybe there was interference. Any other tips? What can I try? I thought about adding an Airport Express on the stairs to extend the network, but that's another $100, and this really should work.
Thanks in advance.So I'm moving into a new apartment where my roommate currently has his first generation Time Capsule set up. The place isn't huge by any means (in downtown Seattle), but is two stories. The Time Capsule's network doesn't even reach downstairs (its set up in his room - and again this is a fairly small apt). Both upstairs and down stairs you can access a dozen of other networks from the building - so it seems like the Time Capsules should reach that far.
I updated the software and firmware, and that is all good to go. I tried the diffferent settings - 2.4ghz, 5 ghz, n only, n with b/g compatibility, etc, all no luck. Also tried switching the channel from Automatic to 5, thinking maybe there was interference. Any other tips? What can I try? I thought about adding an Airport Express on the stairs to extend the network, but that's another $100, and this really should work.
Thanks in advance. -
Results for a period of time (date range)
Hi,
Could you please help me with the following:
SELECT a.lot AS LotNumber, a.codeart AS ItemCode, sum(a.quantity), a.unit AS Unit, a.datetrace AS Dates FROM Production.pps_lotstraces a
WHERE a.codeart LIKE '886%' OR a.codeart LIKE '997%') and (a.datetrace between to_date('20100105','YYYYMMDD') and sysdate)
GROUP BY a.lot, a.codeart, a.unit, a.datetrace
ORDER BY a.lot, a.datetrace
The only issue I have with this query is that when it is run I get following message
ORA-01861 - literal does not match format string. This is related to the fact that the date is stored as a string.
The query should look at the dates from the beginning of the year up to today which is a system date.
Could you please advise how this issue can be resolved?
Thank you in advance for your help
Regardsuser12866679 wrote:
SELECT a.lot AS LotNumber, a.codeart AS ItemCode, sum(a.quantity), a.unit AS Unit, a.datetrace AS Dates FROM Production.pps_lotstraces a
WHERE a.codeart LIKE '886%' OR a.codeart LIKE '997%') and (a.datetrace between to_date('20100105','YYYYMMDD') and sysdate)
GROUP BY a.lot, a.codeart, a.unit, a.datetrace
ORDER BY a.lot, a.datetrace
SELECT a.lot AS LotNumber, a.codeart AS ItemCode, sum(a.quantity), a.unit AS Unit, a.datetrace AS Dates
FROM Production.pps_lotstraces a
WHERE a.codeart LIKE '886%' OR a.codeart LIKE '997%') and (a.datetrace between to_date('20100105','YYYYMMDD') and sysdate)
^
|
|
you have closing parenthesis but you don't have an opening parenthesis
GROUP BY a.lot, a.codeart, a.unit, a.datetrace
ORDER BY a.lot, a.datetraceaside from the missing opening parenthesis what is the datatype for your column a.codeart and a.datatrace? -
How would I increment by one each time a sensor's indicator reaches a specific value range?
Hello -
In my Labview vi, I need to count the number of times a range of sensor values are reached. I am using the +1 incriment element but becuase the vi's loop is sampled so frequently, it continues to incriment because the loop starts over - and also because the sensor hasn't had a chance to change state yet. I need to just count when something is fully compressed and after the it is expanded, and again compressed - add one.
Thanks!
Attachments:
Mole.vi 1263 KBHello,
Setu's answer was great, and I wanted to provide you with a simple VI showing an example of a state machine. This VI simply uses a boolean switch to change between the expansion and compression states (you would replace this with your code that indicates which state the process is in), and it adds one to the shift register value for each time that the compression occurs. (I added a half-second wait so that the effects can be seen slowly).
I hope this helps! Have a great day.
Liz Fausak
Applications Engineer
National Instruments
Attachments:
compressExpand.vi 28 KB
compressExpand.vi 19 KB
compressExpand.vi 16 KB -
Event Time in iCal changed after the Event Date changed !!!!
I can not change either Date of Time of the Event because both of them will be changed to be the same value all the time.
Please see the picture below. I changed to date to 29th and the time changed to 29:00 !!!!
http://www.freemac.net/modules.php?name=Forums&file=download&id=18166
The Time Column in iCal look strange, too.
http://www.freemac.net/files/screenshot_2010-09-07_at_tuesday_7_september___24.09.14_am577.png
I always have my iCal sync with me.com and sync my iPhone with iCal.
Now I have to sync my iPhone with me.com directly to get correct information.
Could you please solve this problem?
I have to edit the event's time on either iPhone or me.com.Greetings,
iCal depends on the computer to tell it how to interpret time and ranges of time. If you change the time arrangement on the computer this can cause issues in iCal. It looks to me like you are using a non-standard time arrangement.
Go to Apple Menu > System Preferences > Language&Text > Formats > Region
This should NOT say "custom". If it does, choose the correct Region for your area of the world (or how you like the format to be).
Check out iCal and see if it is working.
Hope that helps. -
Run-Time error 1004 when VBA run Text-To-Column
Expert,
I got error message 1004 said "Excel can convert only column at a time, The range can be many rows tall but no more than one column wide, try again by selecting cells in one column only. my VBA code is this. If I copy B5 only, the Text-To-Column
is working. can you help ?
Sheets("Sheet1").Range("B5:E300").Copy
Sheets("Sheet2").Select
Range("A2:E300").PasteSpecial xlPasteAll
Columns("B:M").Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Application.CutCopyMode = False
Selection.TextToColumns Destination:=Range("A1"), DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=False, _
Semicolon:=False, Comma:=True, Space:=False, Other:=False, FieldInfo _
:=Array(Array(1, 1), Array(2, 1), Array(3, 1), Array(4, 1), Array(5, 1), Array(6, 1), _
Array(7, 1), Array(8, 1), Array(9, 1), Array(10, 1), Array(11, 1), Array(12, 1)), _
TrailingMinusNumbers:=True
Thanks
James LiangRe: text to columns error
You have four columns selected when you call text to columns, so ...
Replace the word "Selection" with Range("A1:A300") so it looks like...
Range("A1:A300").TextToColumns Destination:=Range("A1"), DataType:=xlDelimited, _
The above is my guess as to what you want to work with; I didn't experiment with the rest of the code.
Jim Cone
Portland, Oregon USA
free & commercial excel programs (n/a xl2013)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2 -
Error while creating Time Card Using API
Hello
I have a requirement to run OTL Interface once day to create/update Time Card in OTL for those datea created on sysdate-1 in Service Module (data will get feeded from Service Module). For example this interface will run on sysdate to create time cards for those data created in the service module on sysdate-1.
I have some sample data and code I am using but it is erroring out with different errors..Can anybody help me on this
My Interface should run as expected below and my time card range will be Monday 24-Dec-2012 to Sunday 30-Dec-2012
Interface Run Date Time Entry to process
25-Dec-2012 24-Dec-2012 Data
26-Dec-2012 25-Dec-2012 Data
CREATE OR REPLACE PROCEDURE main_process (o_errbuf OUT VARCHAR2,
o_ret_code OUT NUMBER,
l_chr_from_date IN VARCHAR2,
l_chr_to_date IN VARCHAR2)
IS
l_chr_skip VARCHAR2 (1);
l_chr_task_exists VARCHAR2 (100);
l_chr_error_msg VARCHAR2 (4000);
l_num_tbb_id NUMBER;
l_num_request_id NUMBER := fnd_global.conc_request_id;
l_num_login_id NUMBER := fnd_global.login_id;
l_num_user_id NUMBER := fnd_global.user_id;
l_num_resp_id NUMBER := fnd_Profile.VALUE ('resp_ID');
l_num_otl_appl_id CONSTANT NUMBER (3) := 809; -- This is the appl_id for OTL, do not change
l_chr_proj_attr1 CONSTANT VARCHAR2 (7) := 'Task_Id';
l_chr_proj_attr2 CONSTANT VARCHAR2 (10) := 'Project_Id';
l_chr_proj_attr3 CONSTANT VARCHAR2 (16) := 'Expenditure_Type';
l_chr_proj_attr4 CONSTANT VARCHAR2 (19) := 'Expenditure_Comment';
l_chr_proj_attr5 CONSTANT VARCHAR2 (23) := 'SYSTEM_LINKAGE_FUNCTION';
i_num_count NUMBER;
i_num_rows_inserted NUMBER := NULL;
l_chr_message fnd_new_messages.MESSAGE_TEXT%TYPE;
l_chr_hdr_eligible VARCHAR2 (5);
l_tbl_timecard_info hxc_self_service_time_deposit.timecard_info;
l_tbl_attributes_info hxc_self_service_time_deposit.app_attributes_info;
l_tbl_messages hxc_self_service_time_deposit.message_table;
l_new_timecard_id NUMBER;
l_new_timecard_ovn NUMBER;
l_num_time_building_block_id hxc_time_building_blocks.time_building_block_id%TYPE;
I NUMBER; --PENDING REMOVE
l_message VARCHAR2 (2000); --PENDING REMOVE
l_time_building_block_id NUMBER; --PENDING REMOVE
CURSOR process_line
IS
SELECT ROWID ROW_ID, a.*
FROM xxpowl.xxpowl_hxt_otl_intf a
WHERE 1 = 1 --a.request_id = l_num_request_id
AND a.status_flag = 'NEW' -- 'VALID'
AND a.error_desc IS NULL
AND a.service_activity_type IS NOT NULL;
BEGIN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Entered From Date:'
|| (TO_DATE ( (l_chr_from_date), 'YYYY/MM/DD HH24:MI:SS')));
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Entered To Date:'
|| (TO_DATE ( (l_chr_to_date), 'YYYY/MM/DD HH24:MI:SS')));
FND_GLOBAL.APPS_INITIALIZE (user_id => l_num_user_id,
resp_id => l_num_resp_id,
resp_appl_id => l_num_otl_appl_id);
BEGIN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Inserting the data in the custom table XXPOWL_HXT_OTL_INTF');
INSERT INTO xxpowl.XXPOWL_HXT_OTL_INTF (SR_NUMBER,
PROJECT_TASK_OWNER,
PROJECT_TASK_OWNER_PERSON_ID,
PROJECT_ID,
PROJECT_TASK_ID,
ASSIGNEE,
ASSIGNEE_ID,
ASSIGNEE_PERSON_ID,
ASSIGNEE_SUPERVISOR_PERSON_ID,
TASK_NUMBER,
PARENT_TASK_NUMBER,
DEBRIEF_NUMBER,
DEBRIEF_HEADER_ID,
DEBRIEF_DATE,
TASK_ASSIGNMENT_ID,
DEBRIEF_OBJECT_VERSION_NUMBER,
DEBRIEF_PER_COMPLETE,
DEBRIEF_LINE_ID,
DEBRIEF_PROCESS,
SERVICE_ACTIVITY,
SERVICE_ACTIVITY_TYPE,
INVENTORY_ITEM_ID,
ITEM,
BUSINESS_PROCESS_ID,
DEBRIEF_TRANSACTION_TYPE_ID,
DEBRIEF_UOM_CODE,
DEBRIEF_HOURS,
CONV_DEBRIEF_IN_HOURS,
DEBRIEF_START_TIME,
DEBRIEF_END_TIME,
DEBRIEF_SERVICE_DATE,
NOTES,
OTL_ELIGIBLE_FLAG,
NOTIF_SENT_FLAG,
NOTIF_ELIGIBLE_FLAG,
ERROR_DESC,
STATUS_FLAG,
INITIAL_NOTIF_SENT_DATE,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_LOGIN,
REQUEST_ID,
INITIAL_REQUEST_ID)
(SELECT b.incident_number sr_number,
h.resource_name project_task_owner,
h.source_id project_task_owner_person_id,
b.external_attribute_1 project_id,
b.external_attribute_2 project_task_id,
jtf_task_utl.get_owner (d.resource_type_code, d.resource_id)
assignee,
d.resource_id assignee_id,
jrre.source_id assignee_person_id,
paa.supervisor_id assignee_supervisor_person_id,
c.task_number task_number,
(SELECT task_number
FROM jtf_tasks_b z
WHERE c.parent_task_id = z.task_id)
parent_task_number,
a.debrief_number,
a.debrief_header_id debrief_header_id,
a.debrief_date debrief_date,
a.task_assignment_id task_assignment_id,
a.object_version_number debrief_object_version_number,
a.attribute1 debrief_per_complete,
e.debrief_line_id debrief_line_id,
cbp.name debrief_process,
cttv.name service_activity,
DECODE (cttv.attribute1,
'Y', 'Service-Billable',
'N', 'Service-Non Billable')
service_activity_type,
e.inventory_item_id inventory_item_id, --f.segment1 item,
(SELECT segment1
FROM mtl_system_items_b f
WHERE e.inventory_item_id = f.inventory_item_id
AND f.organization_id = b.inv_organization_id)
item, --241 --Mater Org
e.business_process_id business_process_id,
e.transaction_type_id debrief_transaction_type_id,
e.uom_code debrief_uom_code,
e.quantity debrief_hours,
(g.conversion_rate * e.quantity) conv_debrief_in_hours,
e.labor_start_date debrief_start_time,
e.labor_end_date debrief_end_time,
e.service_date debrief_service_date,
(SELECT note_tl.notes
FROM JTF_NOTES_B NOTE, JTF_NOTES_TL NOTE_TL
WHERE NOTE.JTF_NOTE_ID = NOTE_TL.JTF_NOTE_ID
AND NOTE_TL.LANGUAGE = USERENV ('LANG')
AND NOTE.SOURCE_OBJECT_ID = a.DEBRIEF_HEADER_ID
AND note.jtf_note_id =
(SELECT MAX (note1.jtf_note_id)
FROM JTF_NOTES_B note1
WHERE NOTE1.SOURCE_OBJECT_ID =
a.DEBRIEF_HEADER_ID))
notes,
'Y',
'N',
'X',
NULL,
'NEW',
NULL,
SYSDATE,
l_num_user_id,
SYSDATE,
l_num_user_id,
l_num_login_id,
l_num_request_id,
l_num_request_id
FROM csf_debrief_headers a,
cs_incidents_all_b b,
jtf_tasks_b c,
jtf_task_assignments d,
csf_debrief_lines e, --mtl_system_items_b f,
mtl_uom_conversions g,
jtf_rs_resource_extns_vl h,
cs_business_processes cbp,
cs_transaction_types_vl cttv --, cs_sr_task_debrief_notes_v notes
jtf_rs_resource_extns_vl jrre,
per_all_assignments_f paa
WHERE a.task_assignment_id = d.task_assignment_id
AND d.task_id = c.task_id
AND c.source_object_id = b.incident_id
AND c.source_object_type_code = 'SR'
AND a.debrief_header_id = e.debrief_header_id
AND e.uom_code = g.uom_code
AND g.uom_class = 'Time'
AND b.incident_owner_id = h.resource_id(+)
AND e.business_process_id = cbp.business_process_id
AND e.transaction_type_id = cttv.transaction_type_id
AND d.resource_id = jrre.resource_id
AND jrre.source_id = paa.person_id --= 181
AND TRUNC (SYSDATE) BETWEEN paa.effective_start_date
AND paa.effective_end_date
AND TRUNC (e.last_update_date) BETWEEN TO_DATE (
(l_chr_from_date),
'YYYY/MM/DD HH24:MI:SS')
AND TO_DATE (
(NVL (
l_chr_to_date,
l_chr_from_date)),
'YYYY/MM/DD HH24:MI:SS')
AND NOT EXISTS
(SELECT 1
FROM xxpowl.XXPOWL_HXT_OTL_INTF old
WHERE old.debrief_header_id =
e.debrief_header_id
AND old.task_number = c.task_number
AND TRUNC (old.DEBRIEF_SERVICE_DATE) =
TRUNC (e.SERVICE_DATE)
AND old.DEBRIEF_TRANSACTION_TYPE_ID =
e.TRANSACTION_TYPE_ID
AND old.request_id <> l_num_request_id
AND old.DEBRIEF_UOM_CODE = e.uom_code
AND old.DEBRIEF_HOURS = e.quantity));
i_num_rows_inserted := SQL%ROWCOUNT;
fnd_file.put_line (fnd_file.LOG,
'No of rows Inserted:' || i_num_rows_inserted);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| 'Error while Inserting debrief lines data into custom table.Error: '
|| SQLERRM
|| '. Exiting the interface without processing further';
fnd_file.put_line (fnd_file.LOG, l_chr_error_msg);
ROLLBACK;
RETURN;
END;
FOR process_line_rec IN process_line
LOOP
l_chr_error_msg := NULL;
l_tbl_timecard_info.delete;
l_tbl_attributes_info.delete;
l_tbl_messages.delete;
l_new_timecard_id := NULL;
l_new_timecard_ovn := NULL;
l_num_time_building_block_id := NULL;
l_chr_message := NULL;
i_num_count := 0;
l_num_tbb_id := NULL;
BEGIN
hxc_timestore_deposit.create_time_entry (
p_measure => process_line_rec.conv_debrief_in_hours,
p_day => TO_DATE ( (process_line_rec.debrief_service_date),
'DD/MM/RRRR'),
p_resource_id => process_line_rec.assignee_person_id,
p_comment_text => process_line_rec.notes
|| '....Remove this notes in the code logic....Request Id:'
|| l_num_request_id, --pending lokesh
p_app_blocks => l_tbl_timecard_info,
p_app_attributes => l_tbl_attributes_info,
p_time_building_block_id => l_num_time_building_block_id);
fnd_file.put_line (
fnd_file.LOG,
'Step#1 completed, TIME_BUILDING_BLOCK_ID:'
|| l_num_time_building_block_id);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#1 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Classify Time
-- Attribute1
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Task_Id',
p_attribute_value => process_line_rec.project_task_id,
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#2 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute2
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Project_Id',
p_attribute_value => process_line_rec.project_id,
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#3 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute3
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Expenditure_Type',
p_attribute_value => 'Service-Billable',
-- p_attribute_value=> 'Service-Non Billable',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#4 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute4
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Expenditure_Comment',
p_attribute_value => 'Expenditure Comment created by API',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#5 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute5
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'SYSTEM_LINKAGE_FUNCTION',
p_attribute_value => 'ST',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#6 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
hxc_timestore_deposit.execute_deposit_process (
p_validate => FALSE,
p_app_blocks => l_tbl_timecard_info,
p_app_attributes => l_tbl_attributes_info,
p_messages => l_tbl_messages,
p_mode => 'SAVE', -- p_mode-> 'SUBMIT', 'SAVE', 'MIGRATION', 'FORCE_SAVE' or 'FORCE_SUBMIT'
p_deposit_process => 'OTL Deposit Process',
p_timecard_id => l_new_timecard_id,
p_timecard_ovn => l_new_timecard_ovn);
COMMIT;
hxc_timestore_deposit.log_messages (p_messages => l_tbl_messages);
IF (l_tbl_messages.COUNT <> 0)
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#7 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM
|| '.API Error messages are:';
i_num_count := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS (i_num_count));
l_chr_message :=
fnd_message.get_string (
appin => l_tbl_messages (i_num_count).application_short_name,
namein => l_tbl_messages (i_num_count).message_name);
fnd_file.put_line (
fnd_file.LOG,
(l_tbl_messages (i_num_count).message_name));
l_chr_error_msg := l_chr_error_msg || l_chr_message || '.';
i_num_count := l_tbl_messages.NEXT (i_num_count);
END LOOP;
END IF;
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (
fnd_file.LOG,
'**** Error.....Inside Exception Block in execute_deposit_process');
BEGIN
hxc_timestore_deposit.log_messages (
p_messages => l_tbl_messages);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (
fnd_file.LOG,
'*****Error....Inside Exception Block in hxc_timestore_deposit.log_messages.Error:'
|| SQLERRM);
END;
l_chr_error_msg :=
l_chr_error_msg
|| 'Error in INSERT API CALL at Step#7 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM
|| '.API Error messages are:';
IF (l_tbl_messages.COUNT <> 0)
THEN
i_num_count := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS (i_num_count));
l_chr_message :=
fnd_message.get_string (
appin => l_tbl_messages (i_num_count).application_short_name,
namein => l_tbl_messages (i_num_count).message_name);
l_chr_error_msg := l_chr_error_msg || l_chr_message || '.';
i_num_count := l_tbl_messages.NEXT (i_num_count);
END LOOP;
END IF;
END;
COMMIT;
IF l_chr_error_msg IS NOT NULL OR l_new_timecard_id IS NULL
THEN
fnd_file.put_line (fnd_file.LOG,
'***** Error *****' || l_chr_error_msg);
o_ret_code := 1;
END IF;
BEGIN
fnd_file.put_line (
fnd_file.LOG,
'Updating the status of the record in custom table for debrief_line_id:'
|| process_line_rec.debrief_line_id);
UPDATE xxpowl.XXPOWL_HXT_OTL_INTF
SET status_flag =
DECODE (
l_chr_error_msg,
NULL, DECODE (
l_new_timecard_id,
NULL, 'FAILED',
DECODE (SIGN (l_new_timecard_id),
'1', 'SUCESS',
'FAILED')),
'FAILED'),
time_building_block_id = l_new_timecard_id,
last_update_date = SYSDATE,
request_id = l_num_request_id,
last_updated_by = l_num_user_id,
error_desc = l_chr_error_msg
WHERE ROWID = process_line_rec.row_id;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error while updating the status to SUCCESS.Error: '
|| SQLERRM;
END;
END LOOP; --process_line
EXCEPTION
WHEN OTHERS
THEN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Unknown/Unhandlled Exception Error......' || SQLERRM);
o_ret_code := 2;
END main_process;
SHOW ERR;
Error Messages:
1. Error in INSERT API CALL at Step#7 for the debrief line id: 41011.Error:ORA-00001: unique constraint (HXC.HXC_ROLLBACK_TIMECARDS_PK) violated.
2. Error in INSERT API CALL at Step#7 for the debrief line id: 41011.Error:ORA-00001: unique constraint (HXC.HXC_LATEST_DETAILS_FK) violated
Thanks a lot for the help!Hello
We will get this error message when we run this from application other than "Time and Labor Engine". So try to run this concurrent program (if you registered as a conc. program) from Time and Labor Engine application.
--Lokesh -
DBI- Update TIme Dimention is completed in Error.
Hi Expert
Please help me to resolve the issue the error we are getting ierror while run the request running in DBI-
Report Name Update Time Dimention
From Date 01-Jan-12
To Date 31-Dec-15
SURAJ
THE idea is we are tring to upload the time dimention in Oracle.
1)
Going to check missing dates in the Time dimension from 19-AUG-2011 00:00:00 to 05-FEB-2013 00:00:00 ...
There are missing dates in the Time dimension.
To fix the issue, please load the Time dimension from 01-JAN-2013 00:00:00 to 05-FEB-2013 00:00:00
The following order lines have dates outside the time dimension range. Review if they are incorrect timestamps or missing in time dimension.
Please reload the Order Management base summary after fixing the missing dates.
Order Number - Line Number - Line ID - Booked Date - Fulfilled Date - Shipped Date - Schedule Ship Date
5163201 - 1.1 - 1309578 - 08/23/2012 - - - 01/03/2013
5162913 - 1.1 - 1307386 - 08/21/2012 - - - 01/08/2013
5162910 - 1.1 - 1307383 - 08/21/2012 - - - 02/05/2013
5162885 - 1.1 - 1307197 - 08/21/2012 - - - 01/15/2013
5162808 - 4.1 - 1306480 - 08/20/2012 - - - 02/05/2013
5162808 - 3.1 - 1306479 - 08/20/2012 - - - 02/05/2013
5162808 - 2.1 - 1306478 - 08/20/2012 - - - 02/05/2013
5162808 - 1.1 - 1306477 - 08/20/2012 - - - 02/05/2013
5162669 - 1.1 - 1305118 - 08/17/2012 - - - 02/05/2013
5162645 - 1.1 - 1304925 - 08/17/2012 - - - 02/05/2013
2)
Financial Intelligence: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FII_TIME_C module: Update Time Dimension
Current system time is 27-AUG-2012 09:57:51
**Starts**27-AUG-2012 09:57:52
**Ends**27-AUG-2012 10:00:13
Start of log messages from FND_FILE
DB Version: 10.2.0.4.0
Atomic refresh: false
FII_TIME_CAL_DAY_MV was altered to parallel
FII_TIME_CAL_DAY_MV was refreshed using INITIAL refresh method
FII_TIME_CAL_DAY_MV was altered to nonparallel
FND_GLOBAL.CONC_PRIORITY_REQUEST: 9888
Request Set: , FORCE_FULL option:
No action for MV Log recreation.
calling "Import BIS Time Dimension into BSC program"
source language=US
Installed languages
US
DBI Implemented
fii_time_day has data. DBI Implemented
select 1 from bsc_db_calendar,bsc_sys_calendars_b where edw_calendar_type_id=1 and edw_calendar_id =1001
and bsc_db_calendar.calendar_id=bsc_sys_calendars_b.calendar_id and rownum=1
select 1 from mlog$_fii_time_day where rownum=1
select 1 from mlog$_fii_time_day where dmltype$$ <>'I' and rownum=1
Only insert rows. Inc change
In load_dbi_cal_into_bsc_inc 08/27/2012 10:00:11
cursor c1 is select max(ent_year_id), min(ent_year_id), to_number(to_char(sysdate,'YYYY')) from fii_time_day; 08/27/2012 10:00:11
l_max_year=2015 08/27/2012 10:00:11
l_min_year=2004 08/27/2012 10:00:11
l_current_year=2012 08/27/2012 10:00:11
Finaly g_bsc_greg_fiscal_year=2012
select bsc_sys_periodicities.periodicity_id,bsc_sys_periodicities.period_type_id from bsc_sys_periodicities ,bsc_sys_calendars_b where bsc_sys_periodicities.calendar_id=bsc_sys_calendars_b.calendar_id and bsc_sys_calendars_b.edw_calendar_type_id=1 an
d bsc_sys_calendars_b.edw_calendar_id=1001/1002/1003
Ent periodicities
g_ent_cal_id=24
g_ent_fiscal_change=0
g_ent_day_per_id=242
g_ent_week_per_id=243
g_ent_period_per_id=244
g_ent_qtr_per_id=245
g_ent_year_per_id=246
445 periodicities
g_445_cal_id=25
g_445_fiscal_change=0
g_445_cal_short_name=BSC_PER_2455850894563151
g_445_day_per_id=247
g_445_day__short_name=BSC_PER_2455850894563151
g_445_week_per_id=248
g_445_week_short_name=BSC_PER_2455850894563163
g_445_p445_per_id=249
g_445_p445_short_name=BSC_PER_2455850894563171
g_445_year_per_id=250
g_445_year_short_name=BSC_PER_2455850894563176
Greg periodicities
g_greg_cal_id=26
g_greg_fiscal_change=0
g_greg_cal_short_name=BSC_PER_2455850894563184
g_greg_day_per_id=251
g_greg_day_short_name=BSC_PER_2455850894563185
g_greg_period_per_id=252
g_greg_period_short_name=BSC_PER_2455850894563190
g_greg_qtr_per_id=253
g_greg_qtr_short_name=BSC_PER_2455850894563196
g_greg_year_per_id=254
g_greg_year_short=BSC_PER_2455850894563201
select report_date,to_char(report_date,'DD'),to_char(report_date,'MM'),to_char(report_date,'YYYY'),
ent_period_id,week_id from mlog$_fii_time_day
where not exists (select 1 from bsc_sys_periods where
periodicity_id=:1 and time_fk=to_char(report
_date,'MM/DD/YYYY'))
order by report_date 242
g_num_dbi_cal_record=1095
select to_date(start_month||'/'||start_day||'/'||current_year,'MM/DD/YYYY') from bsc_sys_calendars_b where edw_calendar_type_id=1 and edw_calendar_id=1001
g_ent_start_date=01-JAN-11
select to_date(start_month||'/'||start_day||'/'||current_year,'MM/DD/YYYY') from bsc_sys_calendars_b where edw_calendar_type_id=1 and edw_calendar_id=1002
g_445_start_date=03-JAN-11
select to_date(start_month||'/'||start_day||'/'||current_year,'MM/DD/YYYY') from bsc_sys_calendars_b where edw_calendar_type_id=1 and edw_calendar_id=1003
g_greg_start_date=01-JAN-11
select ent_period_id,ent_year_id,sequence,name,start_date, end_date from FII_TIME_ENT_PERIOD
where ent_period_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by ent_period_id 244
g_num_dbi_ent_period=36
select ent_qtr_id,ent_year_id,sequence,name, start_date, end_date from FII_TIME_ENT_QTR
where ent_qtr_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by ent_qtr_id 245
g_num_dbi_ent_qtr=12
select ent_year_id,sequence,name, start_date, end_date from FII_TIME_ENT_YEAR
where ent_year_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by ent_year_id 246
g_num_dbi_ent_year=3
select week_id,substr(week_id,1,4),substr(week_id,1,4),sequence,name, start_date, end_date from FII_TIME_WEEK
where week_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by week_id 248
g_num_dbi_445_week=156
select period445_id,year445_id,sequence,name, start_date, end_date from fii_time_p445
where period445_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by period445_id 249
g_num_dbi_445_p445=35
select year445_id col1,year445_id col2,name, start_date, end_date from fii_time_year445
where year445_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by year445_id 250
g_num_dbi_445_year=2
In correct_ent_week 08/27/2012 10:00:12
select to_date(calendar_year,calendar_month,calendar_day,week52,year from bsc_db_calendar where calendar_id=p_calendar
order by calendar_year desc,calendar_month desc,calendar_day desc using 24
l_max_date=31-DEC-12, l_prev_week=54, l_prev_year=2012
select week_id from fii_time_week where week_id in (select week_id from fii_time_day where report_date=:1)
l_prev_fii_week=20130101
Going to correct data.
l_prev_week=54
l_prev_year=2012
l_prev_fii_week=20130101
l_index=1
Output from g_dbi_445_week
20130102 2 2 2013
20130103 3 3 2013
20130104 4 4 2013
20130205 5 5 2013
20130206 6 6 2013
20130207 7 7 2013
20130208 8 8 2013
20130309 9 9 2013
20130310 10 10 2013
20130311 11 11 2013
20130312 12 12 2013
20130313 13 13 2013
20130414 14 14 2013
20130415 15 15 2013
20130416 16 16 2013
20130417 17 17 2013
20130518 18 18 2013
20130519 19 19 2013
20130520 20 20 2013
20130521 21 21 2013
20130622 22 22 2013
20130623 23 23 2013
20130624 24 24 2013
20130625 25 25 2013
20130626 26 26 2013
20130727 27 27 2013
20130728 28 28 2013
20130729 29 29 2013
20130730 30 30 2013
20130831 31 31 2013
20130832 32 32 2013
20130833 33 33 2013
20130834 34 34 2013
20130935 35 35 2013
20130936 36 36 2013
20130937 37 37 2013
20130938 38 38 2013
20130939 39 39 2013
20131040 40 40 2013
20131041 41 41 2013
20131042 42 42 2013
20131043 43 43 2013
20131144 44 44 2013
20131145 45 45 2013
20131146 46 46 2013
20131147 47 47 2013
20131248 48 48 2013
20131249 49 49 2013
20131250 50 50 2013
20131251 51 51 2013
20131252 52 52 2013
20140101 1 1 2014
20140102 2 2 2014
20140103 3 3 2014
20140104 4 4 2014
20140205 5 5 2014
20140206 6 6 2014
20140207 7 7 2014
20140208 8 8 2014
20140309 9 9 2014
20140310 10 10 2014
20140311 11 11 2014
20140312 12 12 2014
20140313 13 13 2014
20140414 14 14 2014
20140415 15 15 2014
20140416 16 16 2014
20140417 17 17 2014
20140518 18 18 2014
20140519 19 19 2014
20140520 20 20 2014
20140521 21 21 2014
Error in load_dbi_445_cal_data ORA-00001: unique constraint (BSC.BSC_SYS_PERIODS_U1) violated 08/27/2012 10:00:13
Error in load_dbi_cal_into_bsc_inc ORA-00001: unique constraint (BSC.BSC_SYS_PERIODS_U1) violated 08/27/2012 10:00:13
Error in load_dbi_cal_into_bsc ORA-00001: unique constraint (BSC.BSC_SYS_PERIODS_U1) violated 08/27/2012 10:00:13
Exception happens in BSC_DBI_CALENDAR.load_dbi_cal_into_bsc ORA-00001: unique constraint (BSC.BSC_SYS_PERIODS_U1) violated
End of log messages from FND_FILE
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Concurrent request completed
Current system time is 27-AUG-2012 10:00:14
---------------------------------------------------------------------------Please see if (Ora-00001: Unique Constraint (Bsc.Bsc_sys_periods_u1) Violated [ID 554200.1]) helps.
Thanks,
Hussein
Maybe you are looking for
-
Text wrap not working properly CS4
Despite trying numerous times over last few days, reviewing multiple tutorials to make sure I know what I'm doing, I simply cannot get the text wrap options to work properly. In SOME instances (not all ... why?!?) I can select text wrap, but when I t
-
How can I change dot by comma in a report?
Hi. I'm working with 6.5.1, full client and webi, but I have not been able to change the numeric format 2.333,00 by 2,333.00. I mean, dot by comma for tens and dot for decimal. I checked the configuration in bo server and pc client, and the format is
-
ISE 1.3 identity purge logging
Hello, we just configured identity purge for our endpoints on our ISE 1.3 Patch 2 deployment. We have a distributed environment with two PAN, two MNT and severl other PSN nodes. Which log-file can verify if the operation was successful and what was d
-
Additional objects in transport data/infosource
Hi, I added some extra InfoObjects in my export data/infosource because i want them to be in the comm structure for my data mart. In this way all the objects are available in my datapackage a can i use it in my startroutine. Normally when performing
-
for Chrome, we would right click in the address bar and choose Edit search engine, but in firefox I can't find where and how to set it up... It seem like firefox quite hard for the advance user ... Btw, I'm newbie so anyone can show me how please? Th