Timed use of an image...

A colleague asked me about copyrighting an image of her art. She said, "I have been asked by an opera festival in England for use of one of my paintings for their program. Is there any way that I can secure the size of the image and set an expiration on the file so that when their time on copyright permission runs out they can no longer use the image?"
I know this is an odd question, but do you all know of a solution?
Thanks,
Dave

dave,
>Is there any way that I can secure the size of the image...
Not sure what you mean here. In a usage contract, you can stipulate the limits of size that the supplied art can be used.
>...and set an expiration on the file so that when their time on copyright permission runs out they can no longer use the image?
What is usually done for (copyrighted) images that you are licensing to others is provide a contract for specific uses of the graphic, and include a £££ licensing fee. Once signed and paid for, the artwork is passed on to the end user. Of course, any additional uses or additional time must be negotiated. You can also "watermark" the graphic as "proof" that it belongs to the copyright holder through Digimarc.
As far as I know, there isn't any easy way to have the artwork "explode" upon expiration of the agreed-to period of use, without jeopardizing the ability to use the art for print reproduction. And, think about it: if you can display the graphic on your screen, it can still be copied in any one of several ways.

Similar Messages

  • How do i use my own image with keying (or green screen)

    how do i use my own image witrh keying (or green screen)

    Put your sky clip on a layer below the clip you want to key. One or the other will be a connected clip. Apply  the Keying filter to foreground clip (the one with the green screen). The green will be seen as transparent and the sky will show through as the BG. Adjust as necessary in the Inspector.
    Good luck.
    Russ

  • Which approach to use for resizing image

    There are two ways of resizing images as I know:
    1. image.getScaledInstance(width,height,hint);
    Using hint like Image.SCALE_AREA_AVERAGING gives somehwat satisfactory resizing.
    2. static BufferedImage resize(GraphicsConfiguration gc, BufferedImage source, int w, int h, Object hintValue) {
    BufferedImage result = gc.createCompatibleImage(w, h, source.getTransparency());
    Graphics2D g2 = result.createGraphics();
    g2.setRenderingHint(RenderingHints.KEY_INTERPOLATION, hintValue);
    double sx = (double) w / source.getWidth(), sy = (double) h / source.getHeight();
    g2.drawRenderedImage(source, AffineTransform.getScaleInstance(sx, sy));
    g2.dispose();
    return result;
    where the hint passed is RenderingHints.VALUE_INTERPOLATION_BILINEAR ;
    Now which of the two method method should I use-using image.getScaledInstance() or using AffineTranform ? opr is there any other way which is faster but provides good result?
    i am creating an image editor, so the GUI dialog will have oprtion to choose the algorithm. I want the method which provides better result yet faster.
    Tanveer

    http://forum.java.sun.com/thread.jsp?forum=20&thread=522483

  • Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoyi

    Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
    == This happened ==
    Every time Firefox opened
    == possibly when the most recent updates were installed, a few days ago

    Thanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
    So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source.

  • When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it.

    When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it. Is this an Apple, Epson, or Foreflight Issue? I just purchased the printer so I can return it and get a different model or brand. I spoke to Epson and the suggestions given did not resolve the issue. I have cut the paper down to the size of the plate roughly 5.5x8 and it still try's to print at 8.5x11. I have also requested help through ForeFlights Tech help but have yet to receive an answer.
    Please help!

    It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.

  • Using a background image for the buttons in spry menu

    Hi All,
    Going nuts here.
    I'm using the vertical spry menu widget w DW CS3 and trying
    to alter the css style sheet, so that I can use a li class for each
    of the 14 links on this page, with an upstate and a hover state
    only. (the focus, and hover while down will be the same as the
    others, to keep it simple and not too distracting)
    The page is here that I will be replacing the entire
    background image in sidebar1 and sidebar2 with a custom spry menu
    with the 14 li classes for 2 seperate menus:
    http://audibleimagesav.com/blank_doc.html
    Has anyone used a background image in place of just using
    bkgrd colors and borders for the spry menu ?
    I am aware of the attributes that the help docs suggest that
    need to be altered as listed here :
    http://livedocs.adobe.com/en_US/Spry/1.4/help.html?content=WS0BB04E11-1BE3-4a67-BC94-BE7DA 93A0159.html
    I have been working on just an experimental page, that is now
    hacked up, however if you want to see that it is here with only the
    first list item coded:
    http://audibleimagesav.com/site%20theme%20ideas/sprymenu_exp.html
    The spry css menu widget for that page is here:
    http://audibleimagesav.com/SpryAssets/SpryMenuBarVertical.css
    So in short, has anyone done a bkgrd image for the main menu
    (not submenu) in a spry widget?
    Thanks in advance.
    Art
    Art Hansen
    Web Design & Marketing
    http://www.innova-techsolutions.com
    321.750.3852 - Cocoa Beach, Florida, USA

    http://meyerweb.com/eric/css/edge/popups/demo2.html
    Maybe

  • Using the value "Image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of preconfigured file types (.jpe, .jpg, .jpeg, .?

    On a form, using the value "image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of pre-configured file types (.jpe, .jpg, .jpeg, .gif, .png, .bmp, .ico, .svg, .svgz, .tif, .tiff, .ai, .drw, .pct, .psp, .xcf, .psd, .raw)?
    Say I wanted to add .gif, .jfif or .ico. I find this array limited, how can I add types to image?
    <input type="file" name="file" accept="image/*" id="file" />
    mimeTypes.rdf does not seem to allow this.

    ''mimeTypes.rdf'' has nothing to do with web development. It's a file that stores your file handling preferences (e.g. if you want ZIP files automatically saved or opened).
    You can't change the file types of the pre-defined content specifiers (audio/*, video/*, image/*), but you can specify additional MIME types. To add PDF to your above example,
    <pre><nowiki><input type="file" name="file" accept="image/*,application/pdf" id="file" /></nowiki></pre>
    For details, see
    * [https://developer.mozilla.org/En/HTML/Element/Input developer.mozilla.org/En/HTML/Element/Input]

  • Using a System Image to Restore an HP Computer in Windows 8

    Hello everyone,
    I would like to bring to everyone's attention, the latest HP Help video for PSG.  It demonstrates how to use a System Image to restore an HP Computer in Windows 8.
    Learn how to restore your HP computer using a system image in Windows 8. With Windows 8, you can backup every file and setting on your computer at once and save it as a system image. If you ever have a software problem, you can restore your PC back to exactly as it was when you created the system image.
    For other helpful videos go to hp.com/supportvideos or youtube.com/howto4u.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
    This question was solved.
    View Solution.

    I hope this video helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

    I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

    Hi,
    If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
    You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
    This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
    send it to you (sorry, I won't, it's copywrited).
    If you cannot get this VI anywhere, you'll need to figure out the BMP file
    format yourself. It's not too complicated, but still could take some days.
    Perhaps someone figured it out before LV5.1 was released.
    Regards,
    Wiebe.
    "RDK" wrote in message
    news:[email protected]..
    > I want to use Get Panel Image in Labview 5.0.1 and need details on how
    > to save the BMP data generated
    >
    > I am trying to generate an application that saves a copy
    of its front
    > panel on completion. This is easy to do using an invoke node with
    > Print VI to HTML but this does not work in an .exe format. I have seen
    > elsewhere that you have to use the Get Panel Image method, but no
    > details are supplied in LV 5.0.1 documentation of how to use the
    > "image" data (1-D Unsigned Byte array) that is generated. I want to
    > save this in a format that can then be read as a bitmap in any
    > standard graphics package. Any assistance?

  • Do I need to use a boot image? 6509 / Sup2T Quad / VSS

    I'm curious about boot loader images and if or why I should use one.
    I've got a 6509 VSS setup running right now with no bootloader variable and no boot image.
    SHEC-VSS#sh boot
    BOOT variable =
    CONFIG_FILE variable =
    BOOTLDR variable =
    Configuration register is 0x2102
    Standby BOOT variable =
    Standby CONFIG_FILE variable =
    Standby BOOTLDR variable =
    Standby Configuration register is 0x2102
    SWITCH-VSS#sh ver
    Cisco IOS Software, s2t54 Software (s2t54-ADVIPSERVICESK9-M), Version 15.1(2)SY2, RELEASE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2014 by Cisco Systems, Inc.
    Compiled Wed 26-Feb-14 16:03 by prod_rel_team
    ROM: System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)
     SHEC-VSS uptime is 16 weeks, 3 days, 21 hours, 10 minutes
    Uptime for this control processor is 16 weeks, 3 days, 21 hours, 10 minutes
    System returned to ROM by power on
    System restarted at 13:56:56 CDT Fri May 16 2014
    System image file is "bootdisk:s2t54-advipservicesk9-mz.SPA.151-2.SY2.bin"
    Last reload reason: power-on
    I'm about to set up a nearly identical VSS pair for another facility.
    I just downloaded the latest SY3 version of IOS for the new pair, and there is a boot image available:
    s2t54-boot-mz.SPA.151-2.SY3.bin
    I just don't know why I would want or need that.  Can anyone explain? I'm not a newbie by any means, but I just don't know why I'd need it.  Right now, in the bootdisk: volume, I just have my IOS image: s2t54-advipservicesk9-mz.SPA.151-2.SY2.bin         That was all that was in there before, but now that I'm building this new pair, I copied s2t54-advipservicesk9-mz.SPA.151-2.SY3.bin onto the same volume.
    I understand that if I set a boot variable I can tell it to boot from one image or the other, but what does the BOOTLDR variable do for me.  If I were to set the BOOTLDR variable to bootdisk:/s2t54-boot-mz.SPA.151-2.SY3.bin    then what does that do for me?  Right now, if I reboot, (until I added that 2nd image) it will just boot the only image in that directory with no issue. 
    What am I missing? Do I need to upgrade or use this boot image for anything?
    Thanks for any tips you can provide!
    Tim

    Tim,
    In simple terms, the bootldr file is the helper file to load the IOS.
    The BOOTLDR environment variable specifies the  Flash file system and filename that contains the boot loader image  required to load system software.
    The variable defines the primary Cisco  IOS image that will load the final image from another source.
    we need to set the BOOTLDR environment variable to specify  the Flash device and filename of the boot loader image.
    For Old version of IOS, there is a requirement of boot loader image to boot up the IOS image.
    But for the latest version of IOS, no need for boot loader image.
    Below are few things happen when the device boots:-
    1. The router initially boots into ROMMON (this is your bootstrap code, which you can see in the show version command).
    2. Then the router loads into the bootloader code (this is the bootloadr code, which you see in show version). This bootloader code is just an intermediate step between the ROMMON mode and the IOS mode.
    3. The router then boots into the IOS mode from the bootloadr mode.
    So if you do not mention the bootloadr specifically by giving the "boot bootloadr" command, the router will assume the bootloadr to be in bootflash of the device and try to boot it from there. If you mention the "boot bootloadr flash:...." command, then the router will look for the bootloadr in the flash (instead of the bootflash). Thats the only difference.
    However, in both cases, if you have a valid IOS to boot into, then the router will come up without a problem, irrespective of the fact whether bootloadr image is in bootflash or flash.
    HTH
    REgards
    Inayath
    *Plz dont forget to rate if this info is helpfull.

  • Just bought a 2tb external hard drive with the intention of moving my iPhoto data files on it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app? Do I need to point iPhoto to this new location?

    Just bought a 2tb external hard drive with the intention of moving my iPhoto data files to it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app?
    Do I need to point iPhoto to this new location?
    Thanks!

    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
    Assuming a Managed Library:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Help! I am trying to use the scripts image processor in Photoshop CC.

    Help! I am trying to use the scripts>image processor in Photoshop CC. When I click on it it comes up with an error saying that it cannot find the Javascript Plug In. I have the newest version of Java installed. How do I get it to work in Photoshop. Do I have to download a separate plug in? Any help would be greatly appreciated.

    Java is not Javascript.
    Do you have a Mac or PC?
    If PC, do you have this file on your system?
    C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\Extensions\ScriptingSupport.8li
    If not, you've got a corrupted installation of Photoshop.  Uninstalling and reinstalling may help.
    -Noel

  • ReferenceError: photoshop is undefined? Trying to use Dr. Brown Image Processor Pro

    Hello!
    I installed Dr. Brown Image Processor Pro.
    I have Bridge and PS (CS6, CC and CC 2014) x64.
    Had to do a manual install to each folder.
    In Bridge I get the error
    ReferenceError: photoshop is undefined? Trying to use Dr. Brown Image Processor Pro.
    I tried both the CC and CS6 bridge same result.
    I have about 100 1GB plus files I want to size down. and need Image processor.
    Any Advice?
    I tried Dr. Brown's JUST FIX IT, bit it just brought me to the script editor. I'm not a programmer.
    Any advice will be appreciated.
    Maxi

    I wonder if this PDF Processor script would work better for you:
    http://www.ps-bridge-scripts.talktalk.net/
    Look under PSCS Scripts in left most column

  • Using a Disk Image instead of a physical disk

    I would like to create an image of a series of instillation disks that I would be able to later use to install an application with out these disks. I found this article on using a disk image in leu of a disk.
    http://docs.info.apple.com/article.html?artnum=106161
    If I did this would I be able to launch the disk image so the instillation application uses this image instead of a disk when prompted?
    If not, is this even possible?

    Not sure about the series deal, but if the OS is already running, then yes, you can use a Disk Image just Like a Disk, once it is mounted.

  • Edit Raw in extrernal editor, will it use the raw image or the JPEG?

    Does iPhoto 06 uses the RAW image when editing it in an external program (like Photoshop) of does it (like iPhoto 05) open a JPEG instead. Opening the RAW file and saving the edited picture back to iPhoto in JPEG would be really handy!
    But doe it do that? I haven't bought iLife 06 yet...

    it depends how you set up preferences. Go to iPhoto -> Preferences, click on the Advanced cog and select "Use RAW files with external editor". That will allow you to open your RAW file in the converter of your choice. It will not, though, update the JPEG back into iPhoto. You will have to reimport it or do like me and continue to search this discussion board for a way to do this.
    Michel

Maybe you are looking for