Timeline with bookmarks with video

Novice here.
I'm doing a project that will require video playback - my idea is to have a timeline with "bookmarks" for lack of a better word. The (short) video will play and will lead into the next video playing. If the user doesn't want to watch the first couple of  videos they can click ahead on the timeline to watch the part of the video they want.  I as hoping to have a progress bar attached to this timeline, that will play along with the video duration and lead into the next video. Am I getting myself into an Actionscript mess? I have very little actionscript experience. A point in the right direction or a different idea would be much appreciated.
Thanks for your time.

Hi Steve,
This will require AS, yes. Now the mess is up to you
The FLVPlayback component is a good start when dealing with video. The simplest setup would be to use an Array to hold the links to the video files. Have a variable (uint) to hold the current index of the video being played: starting at 0 and up to the (length - 1) of the array. Buttons to go to the next & previous video, etc...
You should look at tutorials on implementing a playlist with the FLVPlayback component. Here's one to get you started: http://www.adobe.com/devnet/flash/articles/video_playlist.html
hth,
Jerome.

Similar Messages

  • How do I pair an older Firefox with bookmarks with the new Firefox system without pairing function?

    Firefox is fantastic except when I have a problem. I must be real stupid. I have sent questions about different issues in the past and I see I got a lot of help. Unfortunately I cannot read any results. That is why I quit Firefox for a while. I just decided to give it another try; Firefox is worth it.
    I have had Firefox installed on my "Win 7 Home" laptop for some time without updating it. It contains all my bookmarks from some time back. I just came back to Firefox and installed it on both my desktop machines with Win 7 Pro. The new Firefox sync and pairing are different. I cannot pair my old laptop with my new machines to copy all my bookmarks. I also cannot pair my two desktops.
    What makes it worse, I cannot get the laptop to join the same home group my desktops are in. I tried different combinations with each computer and laptop creating the home group, but I could not get either desktop to be in the same home group as the laptop. The desktops would join each other's home group but not the laptop's. I can see all machines are connected to my home network. This dummy needs help.

    Hi watashi,
    Welcome back :-) I would be very happy to help you out. The new version of Firefox 29 has a new sync. It just came out, so there is no worries about not knowing. Almost easy as pie: [[How to update to the new Firefox Sync]]
    If anything is confusing, please post back so we can help you further and make that article a little more clear if need be :-)

  • Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

    Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

    If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

  • How is the best way to export my project with clips and videos?

    I would like to save my project and export the project with clips and videos included. What is the best way to do it?

    Can you clarify:
    clips and video
    Seems as though you want to retain the original media?
    Export as a Master File to get a good quality export file of your Timeline.
    Al

  • Problems with BookMarks Synchronization through iTunes

    Hello,
    I would like to synchronize Safari Bookmarks with iTunes.
    I have no problem with my iPad and my iPhone 4S, as soon as I unactivate Safari iCloud Synchronization, I can choose in iTunes to synchronize bookmarks.
    But with my iPhone 4, when I unactivate iCloud Synchronization, in iTune, it's written that My bookmarks are synchonized in OTA mode on my iPhone from MobileMe ....
    I don't know why we are talking about MobileMe ...
    I suspect that the iphone have still some information about an old MobileMe account (before iCloud ...) and I don't know at all how I can delete that ...
    I have receive my new iPhone 5 to replace the 4, I was hoping that this problem would be solved, but as I have restored an iPhone 4 backup on my iPhone 5 in order not to hav to define all parameters again, I now have the same problem on my iPhone 5.
    If someone know haw I can delete these old MobileMe information in order me to be able to simply synchronize bookmarks through iTunes, it would be wonderful.
    Thanks in advance.
    Regards
    Thierry

    1.Make sure that the files that you are trying to sync are of the .Mp4 formatt.
    2.If so, skip to step '4' If not, go to download.com and search for "free ipod video converter"
    3.Follow the steps provided by the program to convert the files
    4.Drag and drop the .mp4 files into the ipod icon in itunes like you would for a song.
    Hope I helped

  • Problems with buttons in video

    Hi there,
    I did a project with only one slide with a slide video and a few klickable buttons. So, I want to create an interactive video with all interaction within the videoplayer, so that one can watch the video fullframe.
    Klick on a button stops the video and calls a picture, which I put in the timeline of the slide video in a seperate layer. Here is the extended action, which is called by clicking on the button
    When klicking on the called picture, the picture disappears and the video resumes. Here is the advanced action, which is called by clicking on the picture:
    Here you can see the project (first button at about 0:45 - by the way: is there any possibility to add timecode and fullscreen-button to the captivate-player??):
    www.frisbee-marketing.de/knoblauchsland/lerndoku-gemueseanbau-v2/lerndoku-gemueseanbau-v2. htm
    Problems:
    1. When the video resumes after klicking first on a button and then on the called picture and you want to go back in the video-timeline and klick the button a second time, the button don't appear a second time (or the picture appears instead of the button)
    2. The button around 6:30 never appears but every time, the picture which should be called by klicking the button appears directly. I use the same kind of advanced action like at all other buttons, but it don't work:
    I think about, if my strategy of putting all on one slide, is right...
    ...maybe it would be better to call a seperate slide by clicking on the buttons, and not a picture on the timeline of the slide with the slide video. But: I didn't found a way to jump back to the exact position of the slide video, from where the picture is called. Is there any possibility to do that?
    Has anybody an idea, what to do, so that all buttons work reliable in the intended way?
    Thanks a lot
    Markus

    Hi Neil,
    Thanks for replying.
    I'm using version 32 of the viewer in DPS Folio Properties. I'll describe what I made:
    I created an MSO and Scrollable Frame on one page. Inside the MSO are 13 states. Inside the Scrollable Frame are buttons that link to each MSO state.
    When I tested it on the latest Content Viewer on my iPad Air, the Scrollable Frame works. The buttons also work, they're able to change the state of the MSO -- BUT ONLY when the Scrollable Frame is STILL, not in motion.
    This is the problem: When the Scrollable Frame is in motion and I want to stop the motion as well as tap the Button that I want to go to, the tap does not change the MSO state. But the Click state of the button does change (Normal state: purple, Click state: light purple). Then when I try to tap the button again, or any other button that is in view, the entire Scrollable Frame freezes.
    When I tested this on the Desktop, it works perfectly. The Buttons are able to change the MSO states when I tap them, even as the scrollable frame is in motion.
    Why does this not work on the iPad?
    PS. I tested all viewer versions from 20-32 on DPS and I still get the same problem.
    thanks for your help,
    Ivee

  • PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver.  Deleting bad driver file in adobe program data does not fix the problem,  it simply replaces the text file and crashes again.  My video driver

    PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver.  Deleting bad driver file in adobe program data does not fix the problem,  it simply replaces the text file and crashes again.  My video driver is just fine.  Any help out there?

    rb
    Your video card driver may be fine for something, but just not compatible with Premiere Elements 13/13.1.
    For those with the display card error, the answers include
    a. assure your video card/graphics card driver version is up to date according to the web site of the manufacturer of the card -
    if necessary consider a driver roll back.
    b. determine in Device Manager/Display Adapters if the computer is using 2 cards instead of 1
    c. delete the BadDrivers.txt file
    the rationale for that deletion is found in post 10 of the following older post...principle applies to 13 as well as 9.
    Re: Premiere Elements 9 Tryout Serious Display Problem
    Have you looked for computer ATI card settings that might be more compatible with Premiere Elements 13/13.1?
    When is the program crashing - just opening a new project or rather crashing if editing a particular video format at the Timeline level?
    ATR

  • Problem with playing HD videos

    Hello,
    My problem is with playing HD videos ( 720p or Full HD).
    After upgrading Windows on my laptop and installing drivers, everything was fine till i tried to solve the win 8.1 problem with display drivers and inability to change the level of brightness. After that I discovered that the laptop can't play videos in higher res when they are offline (they become choppy and start to lag behind audio), so i figured the problem is in codecs or the player because any video was playing online. I have tried different codec packs like K lite or FFdshow, tried many players also like VLC, Sm, BS, WM Classic...nothing helped. So  i deleted all those players and codecs so now i cant play HD videos online either.
    Also i have noticed that when i start any hd video CPU usage goes up to 95%.
    Any suggestions what should i do next ?

    Hi there @milosevarsen 
    I understand that you are having performance issues when watching videos. I am happy to help. Since your CPU usage is climbing to 95%, that is a part or symptom of the problem. 
    Work through this page. The main thing is to make sure you control what is running on your system and the amount of available memory. So you will want to look for  viruses and malware, and then what other applications are loaded on your system. Over time these tend to accumulate, and slow down your computer.
    Resolving Slow System Performance (Windows 8)
    The other option would be to look at possibly upgrading your memory. When a file is much larger than the available memory, you are going to see the CPU running harder.
    I hope this helps.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

    I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
    I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
    Thanx

    I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera...  is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
    thanx

  • How to connect Apple TV (2g) HDMI to HDTV with only component video input.

    Trying to connect Apple TV (2g) HDMI to HDTV with only component video input.  Can I use a simple cable or do I need a converter box/plug? Is the HDMI signal coming from ATV encrypted or HDCP enabled?
    The TV is HD, but only has a component input and not HDMI.  Apple TV 2g only has HDMI output.

    google component hdmi converter
    but they are pretty expensive and may not work at all
    and will not work with any DRM material as in movies you reant and maybe netflix and the sports thingy

  • Can someone suggest an affordable external hard drive for use with FCPX and video editing on my Macbook Pro Retina

    I have a Macbook Pro Retina from 2012 and I only got the 250GB hard drive.  I'm getting ready to purchase a Panosonic HC-X920 to use with Final Cut Pro X already installed on my laptop.  Since I know the file sizes are going to be so big, can anyone suggest an affordable external drive fast enough to keep up with editing the video?  I'm not a pro and use it for family and personal projects. 
    I prefer some thunderbolt options since I haven't had a chance to use the inputs since I got my macbook pro. I just don't know what is necessarily too little or too big and too cheap and too expensive for my needs.  Thank you.  

    OWC is a Mac specialist and a very trustworthy vendor.  I have dealt with them and their technical stall on many occasions.  Hence you may look at what they offer and be assured that they will stand behind what they sell:
    http://eshop.macsales.com/shop/Thunderbolt/
    I suspect that for your needs, a 1 TB drive is going to be the minimum.
    Ciao.

  • How to generate PDF with bookmarks?

    Hi,
    The business request is to have pdf report with bookmarks. There is no predefined bookmark object in Livecycle Designer/SFP so my idea is to add some scripting to the form to generate bookmarks dynamically. I defined a standard pdf form with several lines of JavaScript embedded. The script is running in the form preview in Livecycle  Later I was testing the form by calling its function module and looking at the generated PDF file. Unfortunately it seems there is no script embedded in the final output PDF generated by ADS.
    Is Javascript supported in pdf forms? Do I need to perform any additional operations to enable the Javascipt? Do I need to pass additional parameters to ADS? I tested the following settings:
           fp_docparams-fillable = 'X'.
           fp_docparams-DYNAMIC = 'X'.
           fp_outputparams-getpdf = 'X'.
           fp_outputparams-PDFTAGGED = 'X'.
           fp_outputparams-PDFCHANGESRESTRICTED = ' '.
    I appreciate any suggestion.

    Hi Lata,
    May be there is some error in the JavaScript code written.
    Sometimes if there is an error in JavaScript then from where the error occurs from there the JavaScript wont work in the Adobe Form.
    To check whether JavaScript contains errors or not. You just simply open your Adobe Acrobat Reader goto Edit in that goto Preferences and in that Select "JavaScript" in that you find the JavaScript Debugger there you enable "Show Console on errors and messages".
    This may help you in some way or the other.
    Regards
    Pradeep Goli

  • How Can I Print 2 Pages per Sheet with Bookmarks in Word 2007?

    Is there any workaround to print 2 pages per sheet (in MS Word) with bookmarks?
    I always get the following message:
    Acrobat PDFMaker has detected that 'Multiple Pages option in Page Setup' has been selected. It will not be able to create tags, links, bookmarks with this option selected...
    --Roborabbit

    The Word 2007 pdf export (the one MS has here: http://www.microsoft.com/downloads/details.aspx?FamilyID=f1fc413c-6d89-4f15-991b-63b07ba5f 2e5&displaylang=en) supports bookmarks right?

  • How to print an excel file (2010 version) with multiple tabs into a pdf file with bookmarks (acrobat 9). I was able to do this easily using excel (2007 version).

    Recently I got a new laptop, with excel 2010 version and acrobat 9 standard.
    I could no longer print (save as) an excel file with multiple tabs into a pdf file with bookmarks.
    My old computer has excel 2007 version and acrobat 9 standard.
    Print an excel file into pdf with bookmarks was a piece of cake.
    Both machine has the same add-in -- Acrobat PDFMaker Office COM addin
    Thanks if anyone could help me with this.
        Tom

    You need to upgrade Acrobat to a newer version.
    On Thu, Oct 30, 2014 at 4:12 PM, excel-pdf-bookmarks <

  • My How can I sync my bookmarks with my browser of choice on PC so i can have same bookmarks and bookmark-folders in my PC browser as I have made on my iOS device?

    I have saved bookmarks on my iOS device and neately organized them as well. I want my IE or Chrome to import those bookmarks so i can have a copy of each in my computer. Plus I would prefer the same arrangement in my browser as on my iOS device. Is there any way of achieving this using iCloude?
    In short, i want to importe my bookmarks from iPad to Windows PC browser (i would prefer firefox, but chrome is also a fine option).

    On your iOS device, go to Settings>iCloud, sign in with your Apple ID to create your iCloud account and turn Safari to On.  Then set up iCloud on your PC as explained here:  http://www.apple.com/icloud/setup/pc.html, and check Bookmarks.  The requirements for syncing bookmarks with iCloud are:
    Windows 7 or Windows 8
    iCloud Control Panel 3.0
    Internet Explorer 9
    Firefox 22
    Google Chrome 28 (desktop mode only)
    Not sure if the bookmark organization will be the same on your PC or not.

Maybe you are looking for