TLS and Snow Leopard server issues

I have a customer with Snow Leopard server running mail services. A few clients cannot email them due to what we think is a TLS related issue. Their host has TLS enabled for the mail server and they receive the below error message when sending to my customer:
15:27:41.044 3 SMTP-406902(domain.com) failed to establish a secure connection with [xx.xx.xx.xx]:25. Error Code=X509: signature algorithms do not match.
The host that cannot send seems to think it's a Postfix configuration issue but I don't know where to begin. It's not a firewall issue as we've tried that with no success.
Any ideas would be appreciated. Thanks.

You are in the Leopard Server section, better to direct your question to the +Snow Leopard+ Section.

Similar Messages

Remote Desktop and Snow Leopard Server

What is the best way to use Remote Desktop with Snow Leopard Server?
I purchased a mac mini with snow leopard server and Remote desktop so I can easily manage my 11 computers, install and upgrade software etc. etc.
The mac mini server will basically be nothing but a server.
I will use as my main computer a mac pro. Do I need to install Remote Desktop on the server and on my mac pro? What is the best way to deploy the services of Remote desktop and mac os x server?

You install Apple Remote Desktop on the machine you want to control from. In this case, install on your Mac Pro. All you have to do on the clients (controlled Macs) is enable remote management in the System Preferences under Sharing. Just make sure that all your controlled Macs are up to date on their ARD version (v3.3.2) which can be taken care of from Software Update.

Snow Leopard and Snow Leopard Server system differences - are they critical

I need to make several virtual machines with MAC OS for QA testing. As only MAC OS Server can be virtualized, does anybody know, will it make a big difference with Desktop version of Snow leopard for testing of antivirus and firewall? The same question is actual for 10.5. Thank you in advance.
If anybody has an apple software QA experience, I would be grateful if you would share it and tell how did you solv such kind of problems.

Were you ever able to solve this problem. I'm having similar issues since upgrading to snow leopard. Four macs connect to a Windows Server 2003 for shared files. Each user has full permissions & when we "get info" it shows read & write permissions. Two of the computers were running 10.4, two were running 10.5. Everything worked properly until upgrading to snow leopard. Some files let me copy, move, delete. Others either just hang up or we get a "no permission" error. Also getting a "pdf is in use" error, even when the file/folder doesn't contain a pdf. We had our IT rep check the server who said everything is in working order. They don't represent macs any longer but feel that it's a mac problem. I would have to agree since this problem only started after the upgrade, and the one machine that was not upgraded (still running 10.5.8) is not dealing with these problems.
Lastly, I would install 10.5 back on all of the computers if I could, but the leopard disk that came with one of the computers wouldn't work with the 2 machines running 10.4 and I didn't see it available at the apple store. I'll buy it if it's still available, but why wouldn't the disks that I have work?
Thanks for any help

Tiger Server and Snow Leopard Server

I have 2 servers. 1 is an old tiger server and the other a snow leopard. When I try to connect to either in the workgroup app. I am getting and error 14105 line 2334 error and the app unexpectedly quits. I want to be able to have a share point on the old server without users having to log in again. I would assume you could use LDAP for users but I am relatively new the MAC OSX servers. Thanks

No progress yet. Have tried a lot of things with preferences on the server. I have confirmed with another snow leopard machine that this is not related to the machine in any way. I have not yet had a chance to test it on another Tiger server but given the fact that you are seeing it as well I would say there is a problem with the two operating systems cooperating.
As I said, I do have a temporary workaround. If you do a save as with the document, choose to overrite the original it works and then lets you continue to work on that file and save for that session. After you close the file and reopen the problem returns but at least for that session you are fine.

IP Addresses with Airport and Snow Leopard Server

I have DNS running on my MacMini Server with a static ip address of 10.1.0.201, the dns resolves within the network. But I get a double NAT issue, I believe this might be a result of how I have setup the IP addresses.
My DSL router ip address is 192.168.1.254
My Airport
IP Address 192.168.1.1
Subnet 255.255.255.0
Router 192.168.1.254
DNS 194.72.0.114
The airport DHCP is 10.0.1.2 - 10.0.1.200
I think I should reassign IP addresses so that they are in the same subnets is that true?
Should the Airport TCP/IP be
IP Address 10.0.1.1
Subnet 255.255.255.0
Router 192.168.1.254
DNS 10.0.1.201
The airport DHCP is 10.0.1.2 - 10.0.1.200
LDAP server.home.net

Okay tried that and it didn't work, should I have the whole network on 192.168. is that the better approach?
Cheers Andrew

Snow leopard server issue

Hi,
I'm a error messages in my syslog file. Pleas help me
org.apache.tomcat): Throttling respawn: Will start in 8 seconds
Jul 9 14:58:55 nova trustevaluationagent[7829]: MDS Error: unable to create user DBs in /var/folders/zz/zzzivhrRnAmviuee+++LE++3o/-Caches-//mds
Jul 9 14:58:57: --- last message repeated 8 times ---
Jul 9 14:58:57 nova com.apple.launchd[1] (org.apache.tomcat): Throttling respawn: Will start in 8 seconds
Jul 9 14:59:00 nova postfix/local[7853]: error: od[getpwnam_ext]: No record for user katet
Jul 9 14:59:03 nova dovecot[57]: auth(default): od(gulab,192.168.3.2): Credentials could not be verified username or password is invalid.
Jul 9 14:59:07 nova com.apple.launchd[1] (org.apache.tomcat): Throttling respawn: Will start in 8 seconds
Jul 9 14:59:25: --- last message repeated 1 time ---
Jul 9 14:59:25 nova postfix/smtpd[6604]: warning: 122.180.52.10: hostname nsg-corporate-010.52.180.122.airtel.in verification failed: nodename nor servname provided, or not known
Jul 9 14:59:28 nova com.apple.launchd[1] (org.apache.tomcat): Throttling respawn: Will start in 8 seconds
Jul 9 14:59:35 nova trustevaluationagent[7902]: MDS Error: unable to create user DBs in /var/folders/zz/zzzivhrRnAmviuee+++LE++3o/-Caches-//mds
Jul 9 14:59:38: --- last message repeated 8 times ---
Jul 9 14:59:38 nova com.apple.launchd[1] (org.apache.tomcat): Throttling respawn: Will start in 8 seconds
Jul 9 14:59:44 nova dovecot[57]: auth(default): od(gulab,192.168.3.2): Credentials could not be verified username or password is invalid.
Jul 9 14:59:48 nova com.apple.launchd[1] (org.apache.tomcat): Throttling respawn: Will start in 8 seconds
Thanks,
Gulab

Just a quick update. the DNS seems fine but I am getting errors in the logs as follows.
May 12 09:37:34 server jabberd/sm[2084]: version: jabberd sm 2.1.24.1-326.5
May 12 09:37:34 server org.jabber.jabberd[2082]: ERROR: router died. Shutting down server.
May 12 09:37:34 server com.apple.launchd[1] (org.jabber.jabberd): Throttling respawn: Will start in 10 seconds
May 12 09:37:34 server jabberd/sm[2084]: attempting connection to router at 127.0.0.1, port=5347
May 12 09:37:34 server jabberd/sm[2084]: shutting down
May 12 09:38:45 server jabberd/sm[2167]: version: jabberd sm 2.1.24.1-326.5
May 12 09:38:45 server jabberd/sm[2167]: attempting connection to router at 127.0.0.1, port=5347
May 12 09:38:45 server jabberd/sm[2167]: shutting down
May 12 09:38:45 server org.jabber.jabberd[2165]: ERROR: router died. Shutting down server.
May 12 09:38:45 server com.apple.launchd[1] (org.jabber.jabberd): Throttling respawn: Will start in 10 seconds
I checked the the crash report which has the follow kernal issue.
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x000000010011adb0
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Any ideas?

Zend optimizer, Php 5.3 and Snow Leopard server

I'm looking to install Zend Optimizer on Mac OS X 10.6.4 Server but it's seems
that the latest version of Zend Optimizer is not compatible with the 64-bit version
of Apache and PHP 5.3. Anybody with a solution?

The Server version is for machines that are serving small to medium to large networks. It provides various security and account management tools not available in the Client version. For a single user you don't need the Server edition. Furthermore, it's quite expensive by comparison.
Message was edited by: Kappy

Installing Snow Leopard Server From a USB Sticki

In my job, I install Snow Leopard and Snow Leopard Server three or four times a day.
With Snow Leopard, I've found it easiest to install from a USB stick. So, I did a restore from a DVD to a USB in Disk Utility and it's worked great.
With Snow Leopard Server, it is not so simple. When trying to install from a USB stick, I get "Mac OS X 10.6 Server Cannot Be Installed To This Machine." Though strangely, installing from the DVD is no problem.
I've tried to restore straight from the DVD to the USB. I've also tried to install from the DVD to a disk image to the USB. Both times, the USB will mount fine, but I get that error message.
Am I missing a trick here?

Oddly enough it is working for me. I had some issues initially so I went out and bought ONE 16GB thumb-drive (major vendor) and partitioned into two partitions.
I restored one of the partitions with 10.6 and restored the other with 10.6 server. Works flawlessly for me though I do like netinstall. It is a bit slower than the FW800 drive though I do not have to carry around a power brick.
I hope this helps!

Using ms office 2008 for mac home & student edition with snow leopard serv

Hi all,
I have a very particular question.
I have a new small business starting up and we want to make full use of leopard and snow leopard server in our infrastructure. We also want to use os x for all our client machines.
We want to use ms office 2008 for mac as our main offfice software but i believe we don't need all the uses or festures of the business edtion and i need to seek good advice and clarity on this.
We won't ever use any microsoft exchange servers but instead willl use the apple mail servers and all the other apple server services.
My question is, based on the fact that we will have an all apple mac os x backend and client frontend but want to use the ms office for mac as our business software, and also based on the fact that we wont use the "Build your Brand clip art, Build your skills by lynda.com, the Remote Desktop for mac 2, the Microsoft Exchange Server Support and the Microsoft Windows sharepoint services support, do we really need to go for the business edition? Can we not just use the home and student edition and get the same functionality using everything else apart form what we listed as we wont need these?
The other question is, the Entourage 2008, Web services Edition, will this work with an apple backend instead of ms exchange server?
Kind regards and thanks for your wise advice,
Neil Watson

Thanks, Kurt--I understand now.
One reason I was alarmed was that evidently when the tech installed Office 2008, something went awry with either the key installer or the key code, because when I finished the first two updates (12.1 and 12.2), I tried to open Entourage to see if the problem I'd been having was resolved. Instead of opening, Office gave me a message that my product key was invalid! I did find the product key, and called the tech, who will come by to see what's wrong (he's an honest guy, so I'm sure it's a legitimate error of some kind, not a pirated copy). But the thought of installing two pages of updates and maybe running into the same glitch every time made me blanch. So I'm glad to know that Microsoft is still doing Service Packs for 2008!

Help: Install Snow Leopard Server 10.6.0 on Mid-2010 Mac Mini, then update?

I just purchased a Mid-2010 Mac Mini with Snow Leopard Client 10.6.3 (the new ones just released) with the idea of installing my copy of Snow Leopard Client on it and using it as both a network server and media server.
I own Snow Leopard Server 10.6.0 (the initial DVD release) and was thinking I could do a fresh install and update to 10.6.4 on the Mini without problem, but that didn't work. I also tried doing a Target Disk Install to the Mini using my MacbookPro, but the installer choked at the Machine Checksum saying MBPs weren't supported to run the installer.
So, that blows both of my previously known installation options. I was wondering if anyone else with the new Mini and Snow Leopard Server had any suggestions on how to get my current version of Snow Leopard Server (10.6.0) installed on the Mini and then run system updates to get it to boot properly.
Thanks

Allan Eckert wrote:
Hi GrainFocuser;
Your copy of SL Server version is probably too old to install on the new Mac Mini. It probably doesn't have all of the correct drivers for the newer hardware.
You might have better success with your alternatives if you post over on the server forum instead of here.
Allan
Message was edited by: Allan Eckert
Allan, thanks.
It is pretty clear that my installation disk is too old, hence looking for options and suggestions.
In years past with previous versions of Server, there was a way to install an outdated install disk (a point release or 3 behind) and then run the necessary installation updates...either through target disk mode or on to a separate boot disc.
So, with my 10.6.0 Server Install disc, I am not able to do so in either scenario because a) My other admin machine is a MB Pro and the installer performs a hardware checksome preventing install...so no Target Disk Mode, and B) Install on other disc from mini, again Hardware checksome since hardware not recognized.
I am looking at options to enable an install with my disk short of having to physically walk into Apple (a huge trek) and get a new install disk or ask Apple Support to mail one.
So, again... Any options from OS X Server Admins out there?

Trying to install Snow Leopard Server into Parallels 9

Help! I have a 10.8 macbook, purchased Parallels 9 and Snow Leopard Server to create virtual environment for old ppc software (namely final cut pro 6), but the SLS installation halts saying not enough free RAM, but laptop meets min 2gb requirements... Does anyone know how to solve?
I get as far as b in step 6 here
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564
Any help would be greatly appreciated!
Lulu

lulumalmgren wrote:
Help! I have a 10.8 macbook, purchased Parallels 9 and Snow Leopard Server to create virtual environment for old ppc software (namely final cut pro 6)...
Final Cut Pro 6, which is a component of Final Cut Studio 2, is not a PowerPC application; it was written for Intel Macs and should run fine in 10.8, Mt. Lion.
The problem is that there is a "bug" in the installer application that triggers the "PowerPC" dialog box when attempting to install FCP 6 into a Mac running Lion, Mt. Lion or Mavericks.
If the MacBook is old enough to run Snow Leopard, one solution is to partition your hard drive, or add an external one, and install Snow Leopard on it. Then use the "dual-boot" method to run either Snow Leopard or Mt. Lion on your MacBook. When running Snow Leopard, you can then install FCP 6 and run it.
In theory, once you have successfully installed FCP 6 into Snow Leopard, you could then upgrade this partition to Mt. Lion as well, and it should continue to run.
If your MacBook will not run Snow Leopard, review Jeremy Johnstone's method to use Terminal to install FCP 6 into Mt. Lion:
http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
...and as Bill Gates always says:
"You can never have too much money, or too much RAM!"

I transferred files from a NAS server to the Mac Mini Snow Leopard Server and now some of the files have Custom Access and can't be opened by some users. How do I fix this?

We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac. These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's. When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access. The files that work properly don't have that configuration. I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it. We're all using PC's and they get the Error: Access Denied-Contact your administrator--or something similar. I've seen on the web similar issues and it may have something to do with ACL permissions. I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files. Thanks for a solution!!

Oh, on the losing Internet, try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
PS. Your English is quite good & completely understandable.

How to resolve network issue or dns to access web page on snow leopard server?

I have my network setup like as follows:
internet > router 1 > ethernet ports > switch > router 2
I have a mac osx snow leopard server connected to "router 1", but it is so slow when accessing a web page hosted on the server from a browser on a workstation connected to either router 1 or router 2?
Is there a problem with my network setup or maybe because I changed the name to newservername.local?

@Jeff and @Camelot,
I think it is a DNS issue. I completely reset the DNS settings on server and the local name with the steps below, but now cannot access the site hosted on the server at all
I used a modified version of http://www.mkahn.com/2010/09/configuring-dns-on-mac-os-x-10-6-snow-leopard-serve r-for-hosting/ to reset the server set
1. Stop DNS Service in Server Admin
2. Close Server Admin
3. Obtain 10.6 DNS Default files (below)
4. Overwrite the DNS files with DNS Default files:
/etc/dns/loggingOptions.conf.apple
/etc/dns/options.conf.apple
/etc/dns/publicView.conf.apple
/var/named/named.ca/etc/named.conf
/var/named/named.local
/var/named/localhost.zone
5. Restart your server
All machines have 1ms ping responses within the network including this snow leopard server that I am trying to setup. There is another test web server that return pages instantly within this network so I doubt it is a network issue, but a DNS issue.

Unable to access gateway and DNS via VPN (L2TP) with Snow Leopard Server

Summary:
After rebooting my VPN server, i am able to establish a VPN (L2TP) connection from outside my private network. I am able to connect (ping, SSH, …) the gateway only until the first client disconnects. Then i can perfectly access all the other computers of the private network, but i cannot access the private IP address of the gateway.
Additionally, during my first VPN connection, my DNS server, which is on the same server, is not working properly with VPN. I can access it with the public IP address of my gateway. I can access it from inside my private network. A port scan indicates me that the port 53 is open, but a dig returns me a timeout.
Configuration:
Cluster of 19 Xserve3.1 - Snow Leopard Server 10.6.2
Private network 192.168.1.0/255.255.255.0 -> domain name: cluster
-> 1 controller, which act as a gateway for the cluster private network, with the following services activated:
DHCP, DNS, firewall (allowing all incoming traffic for each groups for test purposes), NAT, VPN, OpenDirectory, web, software update, AFP, NFS and Xgrid controller.
en0: fixed public IP address -> controller.example.com
en1: 192.168.1.254 -> controller.cluster
-> 18 agents with AFP and Xgrid agent activated:
en1: 192.168.1.x -> nodex.cluster with x between 1 and 18
VPN (L2TP) server distributes IP addresses between 192.168.1.201 and 192.168.1.210 (-> vpn1.cluster to vpn10.cluster). Client informations contain the private network DNS server informations (192.168.1.254, search domain: cluster).
_*Detailed problem description:*_
After rebooting the Xserve, my VPN server works fine except for the DNS. My client receives the correct informations:
Configure IPv4: Using PPP
IPv4 address: 192.168.1.201
Subnet Mask:
Router: 192.168.1.254
DNS: 192.168.1.254
Search domain: cluster
From my VPN client, i can ping all the Xserve of my cluster (192.168.1.1 to 18 and 192.168.1.254). If i have a look in Server Admin > Settings > Network, i have three interfaces listed: en0, en1 and ppp0 of family IPv4 with address 192.168.1.254 and DNS name controller.cluster.
The DNS server returns me timeouts when i try to do a dig from my VPN client even if i am able to access it directly from a computer inside or outside my private network.
After i disconnect, i can see in Server Admin that the IP address of my ppp0 interface has switch to my public IP address.
Then i can always establish a VPN (L2TP) connection, but the client receives the following informations:
Configure IPv4: Using PPP
IPv4 address: 192.168.1.202
Subnet Mask:
Router: (Public IP address of my VPN server)
DNS: 192.168.1.254
Search domain: cluster
From my VPN client, i can access all the other computers of my network (192.168.1.1 to 192.168.1.18) but when i ping my gateway (192.168.1.254), it returns me timeouts.
I have two "lazy" solutions to this problem: 1) Configure VPN and DNS servers on two differents Xserve, 2) Put the public IP address of my gateway as DNS server address, but none of these solutions are acceptable for me…
Any help is welcome!!!

I would suggest taking a look at:
server admin:vpn:settings:client information:network route definitions.
as I understand your setup it should be something like
192.168.1.0 255.255.255.0 private.
at least as a start. I just got done troubleshooting a similar issue but via two subnets:
http://discussions.apple.com/thread.jspa?threadID=2292827&tstart=0

Lion Clients 10.7.4 show network accounts are unavailable and server is not responding when binding to Snow Leopard server 10.6.8

Hello,
I am running Snow Leopard Server 10.6.8 and my clients are Lion 10.7.4. While testing I had no issues binding 10.7.4 to our 10.6.8 server's OD. I created a 10.7.4 image to push to all of our machines and in the beginning of last week I was able to push the image and get the machines to bind with OD and apply preferences on these machines through workgroup manager. Towards the end of the week though this stopped working. Now any time I bind a 10.7.4 client to OD it allows me to perform an authenticated bind and the machine shows up in workgroup manager but immediatley after binding the client the status jelly next to the OD server in the directory list is red and says "This server is not responding". If I reboot the client I get a notification that "Network accounts are unavailable" at the login screen. My preferences from workgroup manager are also not applying, which is my main concern because without workgroup manager my mac server is somewhat pointless as we use it for very little else.
I've since tried to bind a snow leopard machine (10.6.8) and this still is working with a green status jelly. I've also built a lion machine from scratch, updated to the 10.7.4 combined update and am still getting the same issue where it shows the server is not responding when binding to OD. I then applied the subsiquent OS update after the 10.7.4 combined update but the problem still persists.
Is anyone else having this issue? Any help would help me keep my sanity.
Thanks,
Dane

Have you had any luck finding a solution to this? The only thing I have found was to unbind and then bind without authentication. Any help with progress on your end would be appreciated!
Nick.

TLS and Snow Leopard server issues

Similar Messages

Maybe you are looking for