To add select-options to standard report program...

Hi,
How to add a field as select-options to sap standard report program?
Regards,
sachin
Moderator Message: Do some R&D on the topic first and ask a specific question, instead of a step-by-step process.
Edited by: kishan P on Nov 25, 2010 5:40 PM

Hi shiva,
I have following doubts?
1) exactly where should i add select-options of a field in enhancement point?
and 2) where to keep the database extraction logic for the same select-options?

Similar Messages

Add select-option fields in report category (PNP)

Hi,
I am trying to create a new report category based on the logical database PNP.
I noted that the fields available for select-option for report category come from infotype 0 or 1. Is there anyway to include fields from other infotypes ?
Thank you.
Regards
Kir Chern

Hi Kir Chern
Due to the structure of the logical database you can just insert selection fields that are bestowed.
However, as Charles mentioned, you can add selection fields special to your program by coding a selection screen at your program whose fields are inserted just after the ones added by the report category.
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Need to add select-options on standard Transaction IH08

Hi All,
I have a requirement to add a select-options to the tcode IH08
but when I copy the report program to the Zreport the Enhancement points does not copy.
Any help to do that.
Thanks,
Jatender

Hello,
I think the Enhancement will not be copied to Y or Z because SAP provided the Enhancement for standard Programs or Tcode, when you copied the IH08 Tcode program to Y or Z program then wht is the use of Enhancement so you can directly write the code.
otherwise find the enhancement place in Copied program by comparing Standard program or Y or Z program.
After coverting to Z or Y program directly include the Select-option in the selection screen.
Edited by: Santosh Marupally on Nov 3, 2008 5:48 AM

Check box before select option in a report program.

Hi All..
I have a report program with select options..I want to put a checkbox before the select option, aligned with it...Is it possible..
Regards
Rudra

Hi Rudra,
Take the below help program. In the below program I am disabling the text fields....
Take the refrence and do it will fix the problem
&***************************Reward Point if helpful***************************&
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-003.
PARAMETERS: P1 RADIOBUTTON GROUP G1 DEFAULT 'X' USER-COMMAND Z1.
SELECT-OPTIONS: S_PMNUX FOR S076-PMNUX MODIF ID MI1.
PARAMETERS:     P_WENUX LIKE S076-WENUX MODIF ID MI1.
PARAMETERS: P5 TYPE CHAR15 AS LISTBOX VISIBLE LENGTH 15 MODIF ID MI1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 7.
PARAMETERS: P3 RADIOBUTTON GROUP G2 MODIF ID MI1.
SELECTION-SCREEN COMMENT 10(10) TEXT-001 MODIF ID MI1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 7.
PARAMETERS: P4 RADIOBUTTON GROUP G2 MODIF ID MI1.
SELECTION-SCREEN COMMENT 10(10) TEXT-002 MODIF ID MI1.
SELECTION-SCREEN END OF LINE.
PARAMETERS: P_FILE TYPE RLGRAP-FILENAME MODIF ID MI1.
PARAMETERS: P2 RADIOBUTTON GROUP G1.
SELECT-OPTIONS: S_PMNUX1 FOR S076-PMNUX MODIF ID MI2.        " Product Group
PARAMETERS:     P_WENUX1 LIKE S076-WENUX MODIF ID MI2.       " Plant
PARAMETERS: P6(15) TYPE C AS LISTBOX VISIBLE LENGTH 10 MODIF ID MI2.
*PARAMETERS: P_EMAIL(255) TYPE C MODIF ID MI2.
PARAMETERS: P_EMAIL TYPE SOMLRECI1-RECEIVER.    " Email Address
SELECTION-SCREEN END OF BLOCK B1.
*      AT SELECTION-SCREEN OUTPUT                        *
AT SELECTION-SCREEN OUTPUT.
IF P1 = 'X'.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'MI2'.
        SCREEN-INVISIBLE = 0.
        SCREEN-INPUT = 0.
        SCREEN-ACTIVE = 1.
        SCREEN-OUTPUT = 1.
        MODIFY SCREEN.
      ENDIF.
      IF SCREEN-GROUP1 = 'MI2'.
        SCREEN-INVISIBLE = 0.
        SCREEN-INPUT = 0.
        SCREEN-ACTIVE = 1.
        SCREEN-OUTPUT = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSEIF P2 = 'X'.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'MI1'.
        SCREEN-INVISIBLE = 0.
        SCREEN-INPUT = 0.
        SCREEN-ACTIVE = 1.
        SCREEN-OUTPUT = 1.
        MODIFY SCREEN.
      ENDIF.
      IF SCREEN-GROUP1 = 'MI1'.
        SCREEN-INVISIBLE = 0.
        SCREEN-INPUT = 0.
        SCREEN-ACTIVE = 1.
        SCREEN-OUTPUT = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'MI2'.
        SCREEN-INVISIBLE = 0.
        SCREEN-INPUT = 0.
        SCREEN-ACTIVE = 1.
        SCREEN-OUTPUT = 1.
        MODIFY SCREEN.
      ENDIF.
      IF SCREEN-GROUP1 = 'MI1'.
        SCREEN-INVISIBLE = 0.
        SCREEN-INPUT = 0.
        SCREEN-ACTIVE = 1.
        SCREEN-OUTPUT = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.

Module pool programming " to add selection-option on screen"

I want to add selection option for a field ( matnr ) on the screen in module pool programmiing. ( how it comes in report programming). If you you know how to add Please help me to solve.....

Sure, you need to define your selection screen as a subscreen, then embed this into your subscreen area on the dynpro. Here is a sample program.
report zrich_0006 .
tables: mara.
* Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
            p_rad2 radiobutton group grp1,
            p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
                s_matkl for mara-matkl,
                s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*&      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
* Create Screen 100 with a subscreen area called "subscreen_1010"
* Screen Flow Logic follows
*process before output.
* module status_0100.
* call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
* call subscreen subscreen_1010 .
* module user_command_0100.
Regards,
Rich Heilman

How we can add custom field in standard report 2kee.

Hi,
How we can add custom field in standard report 2kee.
I need one extra field to add in 2kee report for the same is there any customization req.
Regards
Ravi

Ravi,
Which extra field do you want to add or see? Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
Nonetheless, if the field you want to add does not already exist, then yes you can do customization. Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
Have your abaper add the said field in the program or why not just create a query to pull the report?
Elias
Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

Passing parameter from selection screen to corresponding report program.

Hi all,
I am developing a report in which there is a selection screen containing 2 list boxes having month 'from' and 'to' ;ie the month range for which the report is to be run and a parameter for year.below it i have 2 radio button options which will lead to the report that the user clicks on.
I have done the following in the code.
selection-screen begin of block b1 with frame title text-001.
parameters: month1(10) as listbox visible length 10 obligatory.
parameters: month2(10) as listbox visible length 10.
parameters: year(4) obligatory.
selection-screen : end of block b1.
selection-screen: begin of block b2 with frame title text-002.
parameters: rb1 radiobutton group g1,
                    rb2 radiobutton group g1.
selection-screen : end of block b2.
if rb1 = 'X'.
submit ZMIS1.
ENDIF.
if rb2 = 'X'.
submit ZMIS2.
endif.
Now i want the values selected in the listbox and the year to be passed in the report that will be selected in the radiobutton (ie ZMIS1 or ZMIS2) so that the corresponding report output will be displayed directly with the inputs given in the selection screen .
Please tell me how to do this.Thanks in advance.

You also have to pass Selection-screen data for called program the way it has been shown down.
REPORT ZVENKAT_ALV_LIST.
DATA:
      IT_RSPARAMS TYPE STANDARD TABLE OF RSPARAMS,
      WA_RSPARAMS LIKE LINE OF IT_RSPARAMS.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: MONTH1(10) AS LISTBOX VISIBLE LENGTH 10 OBLIGATORY.
PARAMETERS: MONTH2(10) AS LISTBOX VISIBLE LENGTH 10.
PARAMETERS: YEAR(4) OBLIGATORY.
SELECTION-SCREEN : END OF BLOCK B1.
SELECTION-SCREEN: BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS: RB1 RADIOBUTTON GROUP G1 USER-COMMAND UC1,
            RB2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN : END OF BLOCK B2.
IF RB1 = 'X'.
WA_RSPARAMS-SELNAME = 'P_MATNR'. "PARAMETER or SELECT-OPTION of the called program
WA_RSPARAMS-KIND    = 'P'.       "S=Select-options P=Parameters
WA_RSPARAMS-SIGN    = 'I'.
WA_RSPARAMS-OPTION = 'EQ'.
WA_RSPARAMS-LOW     = '11010'.
WA_RSPARAMS-HIGH    = SPACE.
SUBMIT ZMIS1 WITH SELECTION-TABLE RSPARAMS AND RETURN.
ENDIF.
IF RB2 = 'X'.
WA_RSPARAMS-SELNAME = 'P_MATNR'. "PARAMETER or SELECT-OPTION of the called program
WA_RSPARAMS-KIND    = 'P'.       "S=Select-options P=Parameters
WA_RSPARAMS-SIGN    = 'I'.
WA_RSPARAMS-OPTION = 'EQ'.
WA_RSPARAMS-LOW     = '11010'.
WA_RSPARAMS-HIGH    = SPACE.
SUBMIT ZMIS2 WITH SELECTION-TABLE RSPARAMS AND RETURN.
ENDIF.
Thanks
Venkat.O

Passing selection-options to standard PROG

Hi All,
     i want to submit a standard program into zprogram , in standard program there are 3 select-options . i need to pass zselect-options into these 3 select-options in standard program.
if u have any code please pass to me.
please help me.
Many Thanks
Naren

check this
Syntax Diagram
SUBMIT
Basic forms:
1. SUBMIT rep.
2. SUBMIT (name).
Extras:
1. ... LINE-SIZE col
2. ... LINE-COUNT line
3. ... TO SAP-SPOOL List output to the SAP spool database
4. ... USING SELECTION-SCREEN scr
5. ... VIA SELECTION-SCREEN
6. ... AND RETURN
7. ... EXPORTING LIST TO MEMORY
8. ... USER user VIA JOB job NUMBER n
9. ...Various additions for passing parameters to rep
10. ... USING SELECTION-SETS OF PROGRAM prog
Effect
Calls report rep.
The system leaves the active program and starts the new report rep. In basic form 2, you can specify the name of the report in the field name. You must specify the name in uppercase, otherwise a runtime error occurs.
Note
You can only start programs with type '1' using SUBMIT. If the program has a different type, the system triggers a runtime error.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... LINE-SIZE col
Effect
The list generated by the report has the line width col.
Addition 2
... LINE-COUNT line
Effect
The list generated by the report has line lines per page.
Addition 4
... USING SELECTION-SCREEN scr
Effect
When you execute the report, the system uses the selection screen number that you specify in the scr field. This must be a selection screen defined using the SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statements.If you omit the addition, the system uses the standard selection screen 1000.
This addition allows you to start the same report in different situations, using a different selection screen each time.
Notes
The addition VIA SELECTION SCREEN determines whether the report is processed in the foreground or the background.
What happens if the required screen does not exist or is not a selection screen?
Screen 1000:
If you want to use the standard selection screen (... USING SELECTION-SCREEN 1000 or do not specify a ... USING SELECTION-SCREEN) addition, the system does not process a selection screen.
Other selection screens:
The system triggers a runtime error.
Addition 5
... VIA SELECTION-SCREEN
Effect
The selection screen is displayed. In this case, the selection screen is displayed again after the report list has been displayed. The values entered by the user remain displayed.
Addition 6
... AND RETURN
Effect
Returns to the calling transaction or program after the called program has been executed. SUBMIT ... AND RETURN creates a new internal session.
Addition 7
... EXPORTING LIST TO MEMORY
Effect
Does not display the output list of the called report, but saves it in ABAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. In addition, you must not assign a function code to the ENTER key in the current GUI status. The saved list is read from the SAP memory using the function module 'LIST_FROM_MEMORY' and can then be saved to the database using EXPORT, for example. You can process this list further with the function modules 'WRITE_LIST', 'DISPLAY_LIST' ... of the function group "SLST".
Addition 8
... USER user VIA JOB job NUMBER n
Effect
Schedules the specified report in the job specified by the job name job and the job number n. The job runs under the user name user and you can omit the addition USER user. The assignment of the job number occurs via the function module JOB_OPEN (see also the documentation for the function modules JOB_CLOSE and JOB_SUBMIT). This addition can only be used with the addition ...AND RETURN.
Note
When scheduling a report with the SUBMIT ... VIA JOB job NUMBER n statement, you should always use the addition ...TO SAP-SPOOL to pass print and/or archive parameters. Otherwise, default values are used to generate the list and this disturbs operations in a production environment.
SY-SUBRC = 0:
Job scheduled successfully
SY-SUBRC = 4:
Job scheduling terminated by user
SY-SUBRC = 8:
Error in job scheduling (JOB_SUBMIT)
SY-SUBRC = 12:
Error in internal number assignment
Addition 10
... USING SELECTION-SETS OF PROGRAM prog
Effect
Uses variants of the program prog when executing the program rep.
Note
Important
The programs prog and rep must have the same SELECT-OPTIONS and PARAMETERs. Otherwise, variants of the program prog may be destroyed.
Note
When using this addition, the specified variant vari of the program prog is taken in USING SELECTION-SET vari. On the other hand, all variant-related actions on the selection screen of rep (Get, Save as variant, Display, Delete) refer to the variants of prog.
Example
SUBMIT REPORT01
       VIA SELECTION-SCREEN
       USING SELECTION-SET 'VARIANT1'
       USING SELECTION-SETS OF PROGRAM 'REPORT00'
       AND RETURN.
Effect
Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00.
Exceptions
Non-Catchable Exceptions
Cause: The specified program was not found.
Runtime Error: LOAD_PROGRAM_NOT_FOUND
Cause: Invalid value passed to a selection with SIGN.
Runtime Error: SUBMIT_WRONG_SIGN
Cause: The specified program is not a report.
Runtime Error: SUBMIT_WRONG_TYPE
Cause: More than one value passed to a report parameter.
Runtime Error: SUBMIT_IMPORT_ONLY_PARAMETER
Cause: Table passed to a selection with WITH sel IN itab that has an unexpected structure.
Runtime Error: SUBMIT_IN_ITAB_ILL_STRUCTURE
Additional help
Starting Executable Programs (Reports)
Regards
Prabhu

Add fields to the standard report QM15

i want to add fields to the standard report.
t.code QM15 which display the list of items: selection of notifications.
the fields i want to add are:
1. batch no
2. Sample no
3. Main vendor
please let me know how can i do this. if any one can help me with screenshot doc. this is really helpful.
Thanks

Hi experts,
I have done with the z** creation of the standard report. I also create the z*include for the standard includes which are in the standard program. But I not able to find the fieldcatlog or include where I can add my new fields.
But I tried with one structure tht is standard structure in tht standard report so i make it as z*structure and I append my new fields to this structure. I debug the report and this works fine and also shows output, but at output when I change the layout to see these new fields it shows dump.
Then I tried with one more thing to give the positioning to my new added fields. (This is what u can say column positioning ).
When I execute this,it goes to dump screen.
Now I don't what to do with this.
If any one like to see the code. Plz let me know I will post the code.
Or if any one have any document on this plz share. Or any other solution.
Thanks in advance.
Thanks
Sachin

Re : select-options in abap-objects program

Dear friends,
                  I want to give select-options in abap-objects program. How to give that.
                             Thanking You
with regards,
Mani

In the transaction SE24, enter your class name, click modify.
in the tab named "Types" you have to declare two types. By example, if you want to receive one select-options that in your program that uses this class is declared like:
" P_SAKNR FOR SKAT-SAKNR".
you've got to declare two types in the class:
a- TYPES: begin of E_S_SAKNR,
                      sign(1),
                      option(2),
                      low(10),
                      high(10),
                  end of E_S_SAKNR.
b - TYPES E_T_SAKNR type standard table of E_S_SAKNR.
so, in the class method that you want to receive P_SAKNR as importing parameter. You got to do this:
method TEST importing ET_SAKNR type E_T_SAKNR.
now, in the implementation of this method you should be able to use ET_SAKNR as the same way as you usually use a parameter or a select-option. You could use it in a select with the operator IN by example..

How can we pass the select-option value to modulepool program?

hi,
how can we pass the select-option value to modulepool program ?
Because if i declared select-options in executable program and i used SSCRFIELDS to define push buttons in selection screen.
           My requirement if enter the values to select-options and press UPDATE pussbotton then i want call screen which contains tablecontrol.
           How i get select-option values to PAI of call screen for getting the data from database table to my internal table?

Oh I thought that you have selection-screen and again you are working on dialog programming.
if you want to use select-option directly in module pool then it is not possible.
but you can do other way.
create two varaiables
data : v_kun_low like kna1-kunnr,
         v_kun_high like kna1-kunnr.
use these two variables in layout ,let user knows that he can not give options like gt,lt,eq ,it will be always BT.
and also when you see normal report program,you can use multiple values in either low or high,but here it is not possibel.
use can enter only low value and high value.
when you come to program point of view
declare one range
ranges r_kunnr for kna1-kunnr.
do the coding like
r_kunnr-low = v_kun_low.
r_kunnr-high = v_kun_high.
r_kunnr-options = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
now you can use r_kunnr in select query ,it will work like select-option.
other than this there is no option.
Thanks
Seshu

Reg:HOw to add new charactersitics in standard report

hi all
HOw to add new charactersitics in standard report
regards
JK Rao

You need to copy the std report and make necessary changes in the copied report. SAP does not allow changes to std report. The technical details of the report can be seen by selecting from the menu Extras - technical information. Select the library and Report name. Copy the same using t code GRR1. Carry out necessary changes and SAVE. Before execution, you will have to specify the report group in which report needs to be attached. You can choose and existing group or specify a new one.
Regards
Rakesh Pawaskar

How to provide select-option in module pool programming

Hi all,
How to provide select-option in module pool programming.
If any body knows let me immediately.
Thanks
sudheer

Hi Sudheer,
Unfortunately there is no standard way of having a select-option in a module pool program.
What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
Hope it helps.
Thanks, Debasish

To add select-options to MB26

How can we add select-options to t. code mb26? I want to add purchasing group as a select-options in mb26.
How to put data extraction logic for the same?
Regards,
Sachin 11

Hi Sachin,
The only way you could do this is by copying the program PP_PICK_LIST to a Z program & then later in the include INCLUDE PPPLSEL you have to put your Select-option for Purchasing group by copying the include to a Z program.
Also you have to debug & understand the flow of the program & find out the exact place where you can add logic for your select options.
Regards
Abhii

Add Select Options To ViewContainerUIElement in a TabStrip

Hello,
Finally, I have been able to add select options progammatically. But what I would like to do is to split them up using tabstrips. I have searched the forum but have not seen a way to place select options into the ViewContainerUIElement. I have seen where you can embed a view.
I mean I sould be able to take the object and apply the same code for adding the select options.
Can anyone provide me with some assisance?
Regards, Dean.

Hi Sachin,
The only way you could do this is by copying the program PP_PICK_LIST to a Z program & then later in the include INCLUDE PPPLSEL you have to put your Select-option for Purchasing group by copying the include to a Z program.
Also you have to debug & understand the flow of the program & find out the exact place where you can add logic for your select options.
Regards
Abhii

To add select-options to standard report program...

Similar Messages

Maybe you are looking for