To check whether a process flow is valid or not

Hi,
I want to check whether a OWB process flow is valid or not inside a PL/SQL block. Can anyone let me know about any repository table or view where I can check the process flow status.
Regards,
Poulose

Use display schedule job option from the context menu of the start variant of the process chain.
When u chick this.. u will get the available job on this start process.. There u can see whether the process chain in schedule mode or not?
If u can see multiple schedule then u can delete the older ones which are not needed and then u can maintain only one schedule job.
If u click twice.. then there are chances that u might end up with the 2 schedule job with the same time frame.. .. so check the same with the steps mentioned..... if u find two jobs then u need to delete one.. if not there might be chance that ur PC might get trigger twice.. and one trigger will gets failed. and the other one will gets executed..
Thanks
I hope this is clear to u..
Assign points if this helps

Similar Messages

Hi i am from india and i am using iphone 5 but i have problem with charging last 20 % suddenly my phone switched off every day and som heating when i am using internate pls help me where i can check whether my phone waranty is valid on expire

hi i am from india and i am using iphone 5 but i have problem with charging last 20 % suddenly my phone switched off every day and som heating when i am using internate pls help me where i can check whether my phone waranty is valid on expire

https://selfsolve.apple.com/agreementWarrantyDynamic.do

How to check whether a user session is null or not

Hi
I am using Jdeveloper 11.1.2.2
I have a use case of running some Junit test case, this is the problem I have :
There are some Junit tests which are written for some VO's. While testing insert and update operation in Junit there is two mandatory columns Created by and Updated by to be entered for committing into the database.
These values are taken from the UserName of the current UserSession .
So for getting the these values for each user I thought of displaying a JPanel before the test is run, where the user enters the Username and password which is validated and the user is verified.
First, I need to check whether there is a session present or not. For checking this, I wrote a createUserSession() and did like this inside it :
if(fixture.getApplicationModule().getSession().getUserData().isEmpty())If so to show the Jpanel and get the user details and verify the user.
But while running the test itself I found that the session is already present, now I just have to input the values based on who is the user.
But Junit doesn't run the tests in the order in which the test are written. So I have to call this in all the test cases.
The Question is :
How can I check whether the session is already present or not, so that I don't have to ask the user every time while every test is running to enter the Username and Password ?
Thanks,
Nigel.
Edited by: Nigel Thomas on Jul 30, 2012 10:26 AM

Hi,
wondering why don't you create test users and then automatically log them in as Jan Vervecken did on the threads I pointed you to. This way your test cases run without user interaction. To test if a session exists for a user, I would put a custom property into user data. If this property exists, the user session is an existing one. However, make sure the information you save into the user data survives passivation as otherwise the information you get out of this is not accurate. See: http://tompeez.wordpress.com/2011/07/08/jdev-always-test-your-app-with-applicationmodule-pooling-turned-off/
Frank

What's the best way to check whether a user is logged in or not?

I have a question about basic session handling.
I'm running Tomcat 5.0.30 and have a web application where users can register with a username and password, and then log into a "member site".
What is the best way of making sure that a user actually has logged in or not?
What I've done in previous applications I've made is that I've just put a simple variable into the users session after he has successfully entered his password (i.e. Boolean loggedIn=true). Then I just test if this flag is true to grant him access to the member site. Is that a smart way of doing it?
Are there any libraries I can use which handles sessions for me in a secure way?
All comments and suggestions are appreciated!

Maintain a flag using session attributes it to one when the user is logs in set it to value.... and change set it zero or invalidate that session... when the user is logged out...
use something like this while user had logged in
session.setAttribute("flag",<unique_number>);
for checking whether the user had logged in or not...
if(Integer.parseInt(session.getAttribute("flag").toString())=!<unique_number>){
out.println("The session had expired");
out.close();
}

How could I check whether Oracle Enterprise Manager is installed or not ?

Customer uses Oracle DB 11g.
How could I check whether Oracle Enterprise Manager is installed or not ?

If you are using EM DB Control then you run this command,
$ORACLE_HOME/bin/emctl status dbconsole
HTH
Mani

How to check whether an invoice has been paid or not?

Hi,
In FI, how should I check whether an invoice is paid fully and also whether it has any residual item?
And how should I pay an invoice with some residue? Which transaction I should use and what are the steps to do that?
Since I'm new to FI, any guidance will help me a lot...
Thanks,
Priya.

Hi Priya,
you create a posting with residual items as follows:
Incoming payment
1. Start transaction F-28
2. Enter all required information and click on Process open items
3. On the next screen click on the tab Res. items
4. Make sure that only the items that you want to pay are highlighted ((Net amount appears in blue)
5. For each line item enter the residual amount that is still to be paid (Example: you have one invoice over 100 USD and 80 USD are paid, you enter 20 USD, since this is your residual that still needs to be paid)
6. Save
Outgoing payment
1. Start transaction F-53
2-6. is identical to incoming payment
Regards,
Claus

How to check whether the user has a certificate or not?

Hi everyone.
We're currently finishing a web project and the last step is to check whether users accessing the application have a valid certificate or not.
Users with a valid certificate can access all the data. Users without any certificate installed on their browsers may still proceed, but they won't be able to see all data. Please note that the lack of a certificate doesn't mean an error - it's just another use case.
Is there any way to check whether users have a certificate installed on their browsers?
Thanks in advance.
Edit: sorry, I forgot to post some tech details. We're using Struts 1.2 on a Tomcat 5 app server.
Message was edited by:
advaca

I am not sure how Tomcat handles this, but you need to use two-way (mutual authentication) request but not enforce SSL between Tomcat and the client browser. This will make the browser prompt the user for the cert they want to send. Then you'll need to tackle the other part of your problem, getting the correct content displayed depending on whether the user sent a cert or not. I'm even less help there than I was on the first part of your question.
So, yeah - good luck with that
Lee

Check whether the Struts is successfully installed or not through example.

I am completed downloading struts2.0 so now i want check whether struts is successfully instlled and i want do try one simple example for struts. So give process details for check and do the one littel example.

Start reading their own documentation/guides over there at struts.apache.org.

Is there any tool to check whether the proper data is inserting or not?

Hi,
We have different products A,B and C.
whenever user crates an account under these products some X,Y,Z table gets updated.
If user1 creates an account under A then X, Y, Z tables update with some data along with some ID
If user2 creates an account under A then X, Y, Z tables update with SAME DATA along with some other ID
Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?
p.s : if this thread is not related to this forum .. where can I post?
Thanks,
Praveen

Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?You need to check the code to see that. Is the update or insert on the table has from different places? In that case it would be better to have them moved to a centralized place may be a package.
If you want to restrict the columns to specific values then you can use constraints.

How to check whether an asset is fully retired or not ?

Hi All,
Where can I see whether an asset is fully depreciated or not from the backend?
Whats the table and the field?
Thanks and Regards,
MPH

You should log into EBS front-end them go to Assets responsibility, from there you go to Asset Workbench, query your asset, and you will be able to check if the asset is fully retired or not.

How to check whether the Application Server directory exits or not

Hi,
I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
Can anyone help me on the same how to check whether the server directory exists or not.
Thanks in advance.
Best Regards,
Pradeep.

Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
Store the directory name
 l_dpath = p_file+0(l_no).
Validate the directory of the application server
 CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
 EXPORTING
 dir_name = l_dpath
 TABLES
 dir_list = l_i_dlist
 EXCEPTIONS
 invalid_eps_subdir = 1
 sapgparam_failed = 2
 build_directory_failed = 3
 no_authorization = 4
 read_directory_failed = 5
 too_many_read_errors = 6
 empty_directory_list = 7
 OTHERS = 8.
If any problem occurs with the directory then display proper
error message
 IF sy-subrc <> 0.
 Display error message
 MESSAGE e018 WITH 'Problem with directory entered'(008).
 ENDIF. " sy-subrc <> 0
Regards,
Joy.

How to check whether the report is being called or not

Iam using srw.run_report.for calling another report. I have registered both the report in oracle apps11.0.3. When i run the master report in oracle apps I want to see whether the second report is called or not. How to check this.
Thanks.

try to check it in C:\Reports6i\Bin
C:\Reports6i\Bin <-- this may varry depending on the location of your reports.
btw, are you generating a pdf file?

How to check whether a Oracle server is installed or not ?

Hi,
How cani check whether a Machine has oracle server installed or not ?
I have a machine where i have the client tools installed but not server. In that case how can i check whether this machine has oracle server is installed or not?
Thanks in Advance..

user11000236 wrote:
Hi,
How cani check whether a Machine has oracle server installed or not ?
I have a machine where i have the client tools installed but not server. In that case how can i check whether this machine has oracle server is installed or not?
Thanks in Advance..http://tinyurl.com/ngunhv
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

How to check whether set up tables are filled or not

Hi Gurus,
How to check whehter set up tables are filled or not?
Cheers,
Reddy.

Hi Reddy.......
And another point I want to make u clear............LBWQ is not the Delta Queue.............Delta queue is RSA7...............it comes into play in delta loading.......LBWQ is Extraction Queue.........While delta loading....if we use the Update mode Queued Delta........then any Changes will not directly get updated in the Delta queue.....For the Delta set up.........
1) First u hav to run init with data transfer(After filling the set up table)
2) After that any Changed ........will be recorded in the Extraction Queue(LBWQ)........
3) After a certain number of records get accumulated in LBWQ........We hav to run V3 jobs to bring the data in the Delta queue(RSA7)...
Check this.....
Re: question on LBWQ and RSA7
Regards,
Debjani.....

How to check whether INSO Filer is being used or not?

Hi,
We have created full text search indexes using the default syntax -
CREATE INDEX FTI ON DOCUMENTS(DOC_FILE) INDEXTYPE IS CTXSYS.CONTEXT;
How can I find out whether the INSO filter is used or not. Also a basic question, INSO filter helps in reading and "crawling" some 100+ document formats and creating an index against which search could be executed.... right?
Please do let me know.
Thanks & Regards,
Dhwanil

you can specify the inso filter in index code creation.
create index TEST_IDX
on TEST_TABLE (TEXT)
indextype is ctxsys.context
parameters('filter ctxsys.inso_filter');

To check whether a process flow is valid or not

Similar Messages

Maybe you are looking for