To display value for field without its compounded infoobject value

Hi Gurus,
I've added a new Navigational attribute(say A) to my report which is compounded to another object(say B).
When i execute my report I am able to see the values of my new field as B/A.
My requirement is to just show A in the report.
How can I achieve this?
Thanks in advance.
Regards,
Akhil Singh

Hi Shrikanth,
What Rajendra means is that, in the WAD template properties, you will find the property 'Standard Actions of the Web Template(WEB_TEMPLATE_ACTIONS)' .
Check this: http://help.sap.com/saphelp_nw70/helpdata/EN/14/31fa826d0bd540899b02888bf55df4/content.htm
In this, you'll find 'Action Before Rendering'. Here, there is an option to set the command. Here, you need to assign the command 'SET_PRESENTATION'. In that, under 'List of Member Presentations (MEMBER_PRESENTATION_LIST)', select the characteristic for which compounding value is not to be displayed and then in 'List of Member Presentations (MEMBER_PRESENTATION_LIST)', select 'DISPLAY_KEY_NOT_COMPOUND'.
Hope this helps you..!
-Pradnya

Similar Messages

Error Enter a value for field BP_GUID

I am using MDG 7.0
When I create a Request for "Create ERP Customer",
I then enter data including the sales Area Data and Company Code data
Then Submit
at the following approval step , Sales Area data and CC data is missing.
I get ERROR message "Enter a value for Field BP_GUID"
Please advise what Table or T-code am I missing values for .
Thanks for your assistance,

hi,
See the attached screen shot.
Regards,
Tushar

Default values for fields in infotype 0017

Is there any way to set default values for fields in infotype 0017? Maybe a
feature? I'm thinking about defaulting values based on pay scale group.
Thanks before.

Hi
You can implement what i suggested in my previous post.
Or else, you can do what we did in one of our client requirement.
We created a custom Ztable where we had defined which value of the the employee grouping to be placed for which record.
We did that on the basis of the company code fields.
For eg: IF BUKRS = 'TR01'
then EE Grp Expense Type = '1'.
ENDIF.
Similarly for other fields.
Hope this helps.
Harsh

FLEET Table, Possible Values For Field IS SI UNIT

Dear experts,
While doing analysis on fleet data I realized that for field IS_SI_UNIT (PM: Vehicle Data in SI Unit (e.g. Dimensions)) in table FLEET in two separate systems we have vehicle records set with different entries for this field.
In one system vehicles are stored with value F: DB Unit set individually (new)
and in other one with value Y: DB Unit set through (new)
Systems are SAP ECC 6.0
Does anyone know what does it mean and what influence this has? In both systems vehicles are created by end users using standard PM creation transaction and those indicators are set in background while equipment is saved so there is not influence by end user.
I could not find much information on SAP support portal about meaning behind possible values for field IS_SI_UNIT in table FLEET so was wondering if anyone knows more here?
Thanks,
Ivo

Dear,
There will not be any impact.Finally system will consider only SI units for fleet equipment consumption calculation.
Kindly read note:366733 - Equipment/fleet: SI units in table FLEET and 372736 - Equipmt/vehicle:rounding error because of SI units
It may help you.
But in my system i can view only "Y"
Regards,
Pardhu

UDF - Set Valid Values for Field

I have a UDF created in Marketing Docs / row level called UOM_Ordered (alphanumeric, length 2) using Set Valid Values for Field. Values are:
CS
IN
DZ
PC
Above are CS abrev for Case, IN abrev for Inner, DZ abrev for Dozen .................
If possible could I have say for example "IN" not to appear in the drop down if the value in OITM (UDF called U_Inner_Qty) is either NULL or a Zero? It's would be a way to stop mistakes when orders are inputted.
Any help on this would be appreciated.
Thks - Scott

Hello
You could try the following:
Insert a formatted search on the field, which contain conditions, ie whether the condition that the value is 0 or null, then bring the required data, while if it is not the case, applies the search formatted with the available data.
On the other hand, leave the form with all the options for disabled users. The latter through additional authorizations for users
I hope it will help
Best regards,

FRM-40212: Invalid value for Field SHIP_TO_ADDRESS1on forms OEXOETEL

I want to customize a form "OEXOETEL". I want to copy some values from another order to a new order.When i navigate to a block LINE i receive this message: "FRM-40212: Invalid value for Field SHIP_TO_ADDRESS1".
cursor c_order(p_header_id varchar2) is
select o.sold_to,
o.order_type,
o.terms,
o.ship_from,
o.SHIP_to_org_id,
o.ship_to_address1,
o.ship_to_address5,
o.customer_number,
o.invoice_to_org_id,
o.INVOICE_TO_LOCATION,
o.SHIP_TO_LOCATION,
o.invoice_to_address1,
o.invoice_to_address5,
o.sold_to_contact
from oe_order_headers_v o,
hz_parties hzp
where hzp.party_name = o.sold_to
and o.header_id = p_header_id;
IF l_block_name IN ('ORDER') THEN
IF p_event = 'WHEN-NEW-RECORD-INSTANCE' THEN
open c_order(name_in('global.header_id'));
loop
     fetch c_order into x_order_row;
exit when c_order%notfound;
     copy(x_order_row.customer_number,'ORDER.CUSTOMER_NUMBER');
     copy(x_order_row.sold_to,'ORDER.SOLD_TO');
copy(x_order_row.ship_to_org_id,'ORDER.SHIP_TO_ORG_ID');
copy(x_order_row.SHIP_TO_LOCATION,'ORDER.SHIP_TO_LOCATION');
     copy(x_order_row.ship_to_address5,'ORDER.SHIP_TO_ADDRESS5');
copy(x_order_row.ship_to_address1,'ORDER.SHIP_TO_ADDRESS1');
copy(x_order_row.ship_to_address1,'ORDER.SHIP_TO_ADDRESS1_MIR2');
     copy(x_order_row.invoice_to_org_id,'ORDER.INVOICE_TO_ORG_ID');
     copy(x_order_row.invoice_TO_LOCATION,'ORDER.INVOICE_TO_LOCATION');
     copy(x_order_row.invoice_to_address5,'ORDER.INVOICE_TO_ADDRESS5');
copy(x_order_row.invoice_to_address1,'ORDER.INVOICE_TO_ADDRESS1');
copy(x_order_row.INVOICE_TO_LOCATION,'ADDRESSES.INVOICE_TO_LOCATION');
     copy(x_order_row.order_type,'ORDER.ORDER_TYPE');
     copy(x_order_row.sold_to_contact,'ORDER.SOLD_TO_CONTACT');
     copy(x_order_row.ship_from,'ORDER.SHIP_FROM');
end loop;
close c_order;
end if;
end if;

Review Note: 302613.1 - OEXOEORD: Cannot select List of Values From The Ship To Address1 Field
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=302613.1

SDIMA: Values for field SUPP_EXIST in condition table CNCCRMPRCUS801 differ

Hi Experts,
when checking condition records consistency between CRM and ERP via transacation SDIMA we get the following error for one of the conditon records: 'Values for field SUPP_EXIST in condition table CNCCRMPRCUS801 differ'. Can anybody explain to me where this message could come from? To my understanding field 'SUPP_EXIST' only exists in CRM condition tables for technical reason. So no way to compare this against an ERP condition table field, is there?
And related to this: I found that this error message is triggered from method CL_CND_DIMA_CRM->COMPARE_MBDOC. As the DIMA-Compare is triggered asynchronously and just setting a break-point is no option therefore, I was wondering if anybody knows a way of debugging this method in order to find out what the coding does in detail before the message is thrown.
Thanks a lot for your help!
Cheers,
Jens

Hi Brian and the other Experts,
thanks for your help. Unfortunately, I don't have a single record with this problem but a lot more. So it is not possible to correct this manually. Also, I would not know how to correct this anyhow as I don't understand what field in R/3 should map to field SUPP_EXIST in CRM condition tables. Let me explain:
From my understanding, in CRM (leave aside scales) we have two database tables for each condition table, a central and a supplemental table. A condition record always creates a data record in the central table and nothing is inserted in the supplemental table in case that the fields form the supplemental table are not needed. However, when there are less common condition features involved (e.g. uppler limits), then an additional data record will be created in the supplemental table with the relevant data. And this is when field SUPP_EXIST comes into play as it is an indicator for the system that a data record exists for that condition record also in the supplemental table.
The condition record data model in R/3 is completely different. For CRM condition table CNCCRMPRCUS801 the following tables in R/3 are involved: A801, KONH and KONP. And there is a data record for each of them for a given condition record. There is no concept of having a supplemental table as far as I understand it so where exactly would I find this SUPP_EXIST in R/3 so that I can make sure it does not deviate from the data in CRM?
Would be great if someone could give me another hint. What am I getting wrong?
Cheers,
Jens

In TXN CO03, extract value for field "To Confirm" under tab "Qty/Activity"

Hi,
Can anyone help to extract value for field "To Confirm" under tab "QTY/ACTIVITIES" in tansaction CO03 at operatin level. There are three Activiti (CC-Set-up,CC-Labor Time & CC-Var-OH) under table control Activities. I need value of the field "To Confirm" for CC-Labor Time.
From where I can fetch this value,
1. Is this field available in some table?
2. Is there any FM with which the same can be extracted.
3. Any other method?
Regards,
Bibhuti.
Edited by: bibhuti kumar on Feb 20, 2008 6:16 AM

Hi,
pls use below table's and get detals you want
AFKO - Order header details
AFVC - Order operation details
AFVV - Order operation value/date's/qty details
the relation is below
Step1: AFKO; AUFNR-->AFKO-AUFPL
Step2: AFVC; AFKO-AUFPL = AFVC-AUFPL
take filed to APLZL,VORNR
Step3: AFVV;AFKO-AUFPL=AFVV-AUFPL, AFVC-AUFPL = AFVV-AUFPL
take filed to MGVRG,LMNGA,XMNGA,VGW02
Step4: (MGVRG - (LMNGA+XMNGA)) * VGW02
hope this will solve your problem
Regards,
Sankaran

Default value for variable are not within permitted value range (precalc)

Hello BW community
Issue:
I have created a variable (Characteristic Value/ Manual input-default value) and use the precalculated value set (details-basic settings). In the further variable definition I could select the precalculated value set in 'Default values', which I have defined beforehand in the broadcaster..
The precalculated value set in the broadcaster settings is just based on a master data query on 0CUSTOMER.
Error:
The variable gets the error E991/R9E Errors: Default values for variable 'XXX' are not within permitted value range.
The detail description of the error is: You defined default values for variable 'Sold-to party precalc value set for manuel input' that are not appropriate for the variable type; for example, a range is defined as a default value for a variable that only permits a single value.
So please has someone had the same issue and found out how to solve it? It would be excelent to get good solution for this issue.
Best regards and thanks
Christian
PS-1: System BW 701 / SAPKW70105
PS-2 : there has been a SDN entry with the same topic but not resolved too.
link: /thread/980839 [original link is broken]

Hello,
Thanks for your response.
I should have mentioned that in my post. I tried this very first time. I thought that this is the place where you provide default value. But I got following exception at that time, so I thought, may be this is used for something else.
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
oracle.jbo.NameClashException: JBO-25001: Object viewAllInd of type Control Binding Definition already exists.
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:415)Do I need handle something else when you put the default value?
Thanks,
Jai

Display Help for Field not referred through Data Elements in ALV

Hi,
I am working on a report program where the output is in ALV_LIST display format.The internal table used to define the field catalog contains fields that are not declared using Data elements.For these fields, when i press F1 from the output, the message I receive is 'No Document Available'.Can someone tell me how I can attach a help document to these fields without creating a new data element for each of these fields....
For eg : My internal table that forms the field catalog is
Data : Begin of i_itab occurs 0,
         matnr like mara-matnr,
         Name(50),
         end of i_itab.
When this table is displayed in ALV, if F1 is pressed on the field matnr the corresponding dictionary help pops out.But since the field Name has no help document attached to it, i cannot view any help for this..Kindly tell me how i can attach my own help document to this field.
Thanks,
Swathi

Hi,
This issue was solved using the followiing steps.
1. There is a parameter 'IT_EVENT_EXIT 'in the FM REUSE_ALV_LIST_DISPLAY or REUSE_ALV_GRID_DISPLAY.
2.Set the value of the field of this paramter as
EXIT-UCOMM= '&ELP' " F1
EXIT-BEFORE = 'X'
This will make the control go directly to the user command functio written inside the program rather than the standard SAP define duser command....
3. Inside the perform -usercommand in the ALV program use the FM HELP_DOCULINES_SHOW to show the appropriate help document
This method may be used to display help text for those fields/columns in the ALV which are not referred to the fields/data elements in the data dictionary tabel

To allow me put a value into field without coming out the tcode.

Hi Friends,
My requirement is when a value is entered into a field leaving the other field empty should display a error message
I'm making use of the below statement to display the error message
message S000(01) display like 'E' raising error_with_message.
But the thing is ,when trying to save it after entering value into a field leaving the other empty, its displaying the error message which i have maintianed.till here its well and good.But from here I can only come out of the tcode without allowing me to enter the value into the other field.
want a message to be displayed on the status bar and allow me to put the value into the remaining field
without coming out from the screen..
Please help..

Hi laxman,
Are you saying like this..
message S000(01) dispaly like 's' raising error_with_message.
set screen 100.
leave screen.
The Req is "If I enter a value in field leaving the other field empty in tcode XXXX..its should display a message that this particular field is mandatory and allow me to put the value into the other field "
I'm able to display a message when the second field is left empty..
In the message dialog (where the message gets displayed), exit option is there.so i'm coming out of the tcode.But it should give me message and allow me to put the value in the screen without coming out of it.

Display compounded InfoObject value in BEX selection screen

Hi people,
Problem in 7.0
I have Costcenter compounded with Plant and I am using Costcenter for Selections in the BEx varaible screen.
After running the report, in the selection screen value help, only the value of Costcenter is displayed, not the compounded value (So it becomes very difficult to identify from which plant the costcenter is from)
What should I do so that the User sees as Plant/Costcenter in the Value help?
Problem in 3.5
The above issue is not there in 3.5, but.......
I select COSTCENTER X from PLANT A and execute the report. In the report output, I do not see the records only for COSTCENTER X from PLANT A, but for COSTCENTER X from all Plants
why is this? Is it how this works or is it a bug?
Please help. I appreciate your assistance very much.
Thanks,
Shameem

Hey there,
Please understand the behaviour of compounded keys from the below notes:
1111632   Problem with text display in BEx Query Designer
1080863   FAQ: Input helps in Netweaver BI
541253    Restricting characteristics with compound characteristics
575563    Selecting filter values for compound characteristics
Hope this can help,
Diego Seben

Update routine to populate value for field ZDOCCATG(Document category)

Hi Experts,
   I need to populate data for field ZDOCCATG(Document Category) based on the value of the below two fields,
1. 0deb_cre_lc(Debit / credit Amount)
2. 0ac_doc_typ(Belegart)
The logic is as follows:
if 0deb_cre_lc > '0'.
     if 0ac_doc_typ == 'dz'.
      ZDOCCATG = Disputes.
     else
ZDOCCATG = Invoices.
   end If.
else
if 0ac_doc_typ < '0'.
ZDOCCATG = Credits.
end if.
I need to write the update routine to get the values assigned for Document category based on these two fields. When i open the routine for the field ZDOCCATG, i can see the below screen:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
FORM compute_data_field
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING    COMM_STRUCTURE LIKE /BIC/CS80FIAR_O03 - (Communication structure)
           RECORD_NO LIKE SY-TABIX
           RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZOARFSCM00-/BIC/ZDOCCATG
           RETURNCODE LIKE SY-SUBRC "Do not use!
           ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal table "MONITOR", to make monitor entries
result value of the routine
RESULT = .
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
ENDFORM.
Please let me know the code to be inserted (based on the logic mentioned above) in the above screen . Thanks
Regards,
Kavitha Jagannath

Hi Kavitha,
      Supposing the technical name of fields is /bic/0deb_cre_lc and /bic/0ac_doc_typ use the code below at the marked position.
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: ...
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS80FIAR_O03 - (Communication structure)
RECORD_NO LIKE SY-TABIX
RECORD_ALL LIKE SY-TABIX
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZOARFSCM00-/BIC/ZDOCCATG
RETURNCODE LIKE SY-SUBRC "Do not use!
ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
result value of the routine
<----- Paste the code below as shown here --->
if comm_structure-/bic/0deb_cre_lc > 0.
if comm_structure-/bic/0ac_doc_typ == 'DZ'.
   result = 'DISPUTES'.
else
   result = 'INVOICES'.
endIf.
elseif comm_structure-/bic/0deb_cre_lc < 0.
result = 'CREDITS'.
end if.
<----
>
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.
Regards:
Jitendra
Edited by: Jitendra Gupta on Oct 15, 2009 3:05 PM

Setting default values for field on screen.

Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module PBO_OUT OUTPUT
      text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE.                 " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.

Works Now...

How to put entries in a for loop without hard coding the values

I have a below pl/sql block that needs to flag a claim based on claim number values given that I have in an excel sheet. Is there a way to capture those 500 claims efficiently in the select statement in the pl/sql without hardcoding these from value 1 ...to value 500 (as listed below)???
DECLARE
   ln_ctr   NUMBER := 0;
BEGIN
   FOR lrecclaimnumber
   IN ( SELECT   entityid claimnumber
         FROM   mpi_fnx.wfTokenEntity wte
        WHERE   wte.entityid IN
                      ('Value1','Value2',....'Value 500')
LOOP
   mpi_fnx.pkgSaveClaimData.spMarkClaimInvalid (pivClaimNumber          => lrecclaimnumber.claimnumber,
                                                pininvalidreasonid      => 304,
                                                pinuserid               => 4999
   ln_ctr := ln_ctr + 1;
   END LOOP;
   DBMS_OUTPUT.put_line ('Total Entries Processed: ' || ln_ctr);
END;
/

DECLARE
   ln_ctr   NUMBER := 0;
BEGIN
   FOR lrecclaimnumber
   IN ( SELECT   entityid claimnumber
         FROM   mpi_fnx.wfTokenEntity wte
        WHERE   wte.entityid IN
                      (select 'Value '|| level as col_name from dual connect by level <=500)
LOOP
   mpi_fnx.pkgSaveClaimData.spMarkClaimInvalid (pivClaimNumber          => lrecclaimnumber.claimnumber,
                                                pininvalidreasonid      => 304,
                                                pinuserid               => 4999
   ln_ctr := ln_ctr + 1;
   END LOOP;
   DBMS_OUTPUT.put_line ('Total Entries Processed: ' || ln_ctr);
END;
/ bye
TPD

To display value for field without its compounded infoobject value

Similar Messages

Maybe you are looking for