To empty alv field declared as WERT

Hi,
I have a field in alv which holds values declared as WERT. In one case the field need to be empty. To do this I used CLEAR statement. But when I did like that, the field showed 0. How can I empty the field as it shows nothing?
Any help will be appreciated.

in the field catalog of the filed set
NO_ZERO:
If NO_ZERO is set, no zeros are displayed for initial value fields. The cell remains empty.

Similar Messages

ALV field editable

Hi,
Please help me,
I need to make a ALV report, which is having one field editable.
I want a code , when i will give input in editable field in ALV report , it should be save in my internal table.
Please give me a sample program ,
like take a internal table with two field. whose one field will editable.when user will give input in editable field it should save in internal table in same row like ALV list.
Thanks,
Abhishek

The follow program demonstrates how to make individual fields of an ALV grid editable (NetPR greater than 10).
Changes required from a basic ALV grid include adding a new field to ALV grid data table(it_ekko), Populating this
field with style attribute and adding an entry to layout control table.
*& Report ZDEMO_ALVGRID_EDIT                                          *
*& Example of a simple ALV Grid Report                                 *
*& The basic ALV grid, Enhanced to display specific fields as          *
*& editable depending on field value                                   *
REPORT ZDEMO_ALVGRID_EDIT                 .
TABLES:     ekko.
TYPE-POOLS: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
field_style TYPE lvc_t_styl, "FOR DISABLE
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA: it_fieldcat TYPE lvc_t_fcat,     "slis_t_fieldcat_alv WITH HEADER LINE,
      wa_fieldcat TYPE lvc_s_fcat,
      gd_tab_group TYPE slis_t_sp_group_alv,
      gd_layout    TYPE lvc_s_layo,     "slis_layout_alv,
      gd_repid     LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM set_specific_field_attributes.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
wa_fieldcat-fieldname   = 'EBELN'.
wa_fieldcat-scrtext_m   = 'Purchase Order'.
wa_fieldcat-col_pos     = 0.
wa_fieldcat-outputlen   = 10.
wa_fieldcat-emphasize   = 'X'.
wa_fieldcat-key         = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'EBELP'.
wa_fieldcat-scrtext_m   = 'PO Item'.
wa_fieldcat-col_pos     = 1.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'STATU'.
wa_fieldcat-scrtext_m   = 'Status'.
wa_fieldcat-col_pos     = 2.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'AEDAT'.
wa_fieldcat-scrtext_m   = 'Item change date'.
wa_fieldcat-col_pos     = 3.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'MATNR'.
wa_fieldcat-scrtext_m   = 'Material Number'.
wa_fieldcat-col_pos     = 4.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'MENGE'.
wa_fieldcat-scrtext_m   = 'PO quantity'.
wa_fieldcat-col_pos     = 5.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'MEINS'.
wa_fieldcat-scrtext_m   = 'Order Unit'.
wa_fieldcat-col_pos     = 6.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'NETPR'.
wa_fieldcat-scrtext_m   = 'Net Price'.
wa_fieldcat-edit        = 'X'. "sets whole column to be editable
wa_fieldcat-col_pos     = 7.
wa_fieldcat-outputlen   = 15.
wa_fieldcat-datatype     = 'CURR'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'PEINH'.
wa_fieldcat-scrtext_m   = 'Price Unit'.
wa_fieldcat-col_pos     = 8.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
FORM build_layout.
Set layout field for field attributes(i.e. input/output)
gd_layout-stylefname = 'FIELD_STYLE'.
gd_layout-zebra             = 'X'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
       EXPORTING
            i_callback_program      = gd_repid
           i_callback_user_command = 'USER_COMMAND'
            is_layout_lvc               = gd_layout
            it_fieldcat_lvc             = it_fieldcat
            i_save                  = 'X'
       TABLES
            t_outtab                = it_ekko
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
   UP TO 10 ROWS
    FROM ekpo
    INTO CORRESPONDING FIELDS OF TABLE it_ekko.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form set_specific_field_attributes
      populate FIELD_STYLE table with specific field attributes
form set_specific_field_attributes .
DATA ls_stylerow TYPE lvc_s_styl .
DATA lt_styletab TYPE lvc_t_styl .
Populate style variable (FIELD_STYLE) with style properties
The NETPR field/column has been set to editable in the fieldcatalog...
The following code sets it to be disabled(display only) if 'NETPR'
is gt than 10.
LOOP AT it_ekko INTO wa_ekko.
    IF wa_ekko-netpr GT 10.
      ls_stylerow-fieldname = 'NETPR' .
      ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
                                             "set field to disabled
      APPEND ls_stylerow TO wa_ekko-field_style.
      MODIFY it_ekko FROM wa_ekko.
    ENDIF.
ENDLOOP.
endform.                    " set_specific_field_attributes
hope this helps
reward if useful
Edited by: Richa Khosla on Mar 25, 2008 1:30 PM

Alv field catlog

1. why we use fieldcatlog in alv ? which purpose?and what is the defination of fieldcatlog?

Hi
Field catalog containing descriptions of the list output fields. You can use fields of the catalog to determine the number format and column properties of the list to be displayed.
The field catalog contains more than 60 fields, some of which are only used internally. The field catalog is defined in the Data Dictionary through table type LVC_T_FCAT.
We can get field description by calling function module REUSE_ALV_FIELDCATALOG_MERGE.
REPORT z_colour NO STANDARD PAGE HEADING .
TABLES :pa0002.
TYPE-POOLS: slis.                 "ALV Declarations
DATA : BEGIN OF it OCCURS 0,
      pernr LIKE pa0001-pernr,
      rufnm LIKE pa0002-rufnm,
      cell_colour TYPE lvc_t_scol,    "Cell colour
       END OF it.
SELECTION-SCREEN BEGIN OF BLOCK main WITH FRAME.
SELECT-OPTIONS :s_pnum FOR pa0002-pernr .
SELECTION-SCREEN END OF BLOCK main.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH
HEADER LINE,
      gd_layout    TYPE slis_layout_alv,
      gd_repid     LIKE sy-repid,
      gt_sort     TYPE slis_t_sortinfo_alv.
To colour a cell.
DATA ls_cellcolour TYPE lvc_s_scol.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
END-OF-SELECTION.
FREE : it.
FORM build_fieldcatalog .
fieldcatalog-fieldname   = 'PERNR'.
fieldcatalog-seltext_m   = 'Personnel No.'.
fieldcatalog-col_pos     = 0.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'RUFNM'.
fieldcatalog-seltext_m   = 'Name'.
fieldcatalog-col_pos     = 0.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM.
FORM build_layout .
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(256).
gd_layout-coltab_fieldname = 'CELL_COLOUR'.
ENDFORM.                    " build_layout
FORM display_alv_report .
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = gd_repid
      is_layout                = gd_layout
      it_fieldcat              = fieldcatalog[]
      i_save                   = 'A'
    TABLES
      t_outtab                 = it
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.                    " display_alv_report
FORM data_retrieval .
select pernr rufnm from pa0002 into corresponding
fields of table it where pernr in s_pnum.
LOOP AT it.
*Now based on the value of the field pernr we can
change the cell colour of the field rufnm or pernr.
    IF it-pernr eq '10001' .
      ls_cellcolour-fname = 'RUFNM'.
      ls_cellcolour-color-col = '5'.
      ls_cellcolour-color-int = '1'.
      ls_cellcolour-color-inv = '0'.
      APPEND ls_cellcolour TO it-cell_colour.
      IF sy-subrc EQ 0.
        MODIFY it.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.

Error in updating ALV field catalog in selection tool for Planning Book

Hi ,
I am Implementing BADI '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
1). INIT_OBJECT_LIST
2). F4
3). LOC_PROD_VALUE_LIST
Please help on the same if u have any idea or clue.
Thanks.

Hi Srinivas!
Where did you get your implementation from?
It would be nice if you could debug your code!
For the F4 method, have you seen this note?
Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
Also check this note. It contains selection modifications in the BAdI:
Note 376902 - SDP selector: Basis corrections for BADI
I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
Thank you!
Will
SCM Support Consultant

Error in updating ALV field catalog in selection

Dear all,
I'm trying to use the standard transaction /SAPAPO/TSKEYFMAIN in order to check the TS values.
After filling the selection variant, the system shows the following error:
'Error in updating ALV field catalog in selection'
Could you please provide me with further details about the error? What could be the possible solution to avoid it?
Many thanks,
SM

Hi Marius,
thanks for your answer.
I would like to use the /SAPAPO/TSKEYFMAIN transaction to check massively the values in the time series KFs and not just the consistency of them.
So do you know any other transaction to do it or do you have an idea about the error of /SAPAPO/TSKEYFMAIN?
Thanks for your help!
SM

Error in ALV : Field Does not exists in Output table .

Hi All,
In my ALV report, program get dumped and showing error when i tried to put a col named Distribution channel ion the alv.
I have put the Distribution cannel field in the IT_FInal table , but still getting folwong errors :
Error : Field Symbol is not been assigned.
As Instructed i have passed I_INTERFACE_CHECK = 'X'.
By this i am getting detail error that :
Field Distribution channel does not exists in Output table & Heading for List is missing .
But i have maintained the distribition channel in IT_Final table
Please suggest wheather we have to define dis channel in any other place.
Thanks in advance.
Can any one help me regrarding this.
Thanks in advance.

Hello,
You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
BR,
Suhas
PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

Decimal Value display in ALV Field display

Hi Expert,
I need to dispaly one ALV Field "Routine Work Hour" value up to 2 decimal place in ALV output i.e if value is 2.5 then it should display as 2.50.The field which refers to this is ISMNW and the database table is AFRU.Now if this value is maintained in MINUTE unit, then code converts into HOUR unit and correctly outputs to ALV output up to 2 decimal after i changed the field decimal lenght.But for the value which is mainatined in HOUR unit, it correctlty populated into the final internal table upto 2 decimal and this table data while passing into FM " REUSE_GRID_DISPLAY" it only outputs upto 2 deciamal value for the value which is maintained as MINUTE unit in database table AFRU in ALV output, but for other value(Which are maintained in HOUR unit in table AFRU) it still shows 1 decimal length.But the internal table correctly populates these values up to 2 decimal for all unit of work(MINUTE/HOUR) while passing though this above FM.
Please advise where i need to look into.
Thanks

hi,
pass these parameters to fieldcatlog.
e.g.
Fcat-ref_fieldname = 'ISMNW'.
fcat-ref_tabname = 'AFRU'.
fcat-decimalsout = 2.
Hope this will help you.
Regards,
Vijay

Creating an empty signature field in Acrobat Pro X

I want to make an empty signature field in Acrobat Pro X, so that Acrobat Reader users can later sign it. I know how to enable that last part ("extended PDF Reader"), but don't know how to make an empty field.

Is a blank signature field what I need to create if I want my document to be signed by someone else? I am just the editor of the document. I will not officially sign the document. The signature will come from a managment postion. Everytime I try to create a blank signature field though Adobe wants to sign the document with my personal signature.

Empty text field warning

I want to have a book printed from Aperture 1.5.4, but when I press the 'Buy Book' button, a dialog pops up:
"*Empty text field detected in book*
The book you are about to order contains an empty text field.
How do you wish to proceed? Cancel/Continue"
That's all very nice, to give me a warning like that, but how on earth am I going to find one invisible text field in a 50-page book full of colour photos??
Does anyone have a hint? How problematic is it to leave the text field in? Common sense dictates that an empty text field should not be visible in the printed book either, but knowing Apple's fickleness in book matters... can I be sure? I can generate and check the PDF of course, but I don't know if that's sufficient proof.
Thanks!

prauz wrote:
I want to have a book printed from Aperture 1.5.4, but when I press the 'Buy Book' button, a dialog pops up:
"*Empty text field detected in book*
The book you are about to order contains an empty text field.
How do you wish to proceed? Cancel/Continue"
That's all very nice, to give me a warning like that, but how on earth am I going to find one invisible text field in a 50-page book full of colour photos??
hi, prauz
sounds like there is a text box (unfilled) and you haven't typed nor pasted text into it.
it's not that the text field is invisible, it's there yet to be selected and filled in with your information. so it is visible. have another looksie at it, look for the default letters or "Title Information Here"...
victor

1000 CHARACTER TEXT IN ALV FIELD

Hi Experts,
I have a String type variable containing 1000 character text that I am passing in a field on ALV. But ALV field can display on 132 characters. So now my requirement is that when a user double clicks on that field... then a popup or a screen appears where the user can read the entire text of that field.
I have tried some FMs (like POPUP_TO_CONFIRM, POPUP_TO_INFORM, POPUP_DISPLAY_TEXT etc...), but all have length restriction.
Please suggest if there is any FM to get the entire 1000 character text on a popup.... OR if there is any other way to do this...
Thanks in advance
Regards,
Ashish Goyal

I am using this code provided by you, facing error : Field "OB_GUI_DIALOGBOX_CONTAINER" is unknown. It is neither in one of   the specified tables nor defined by a "DATA" statement.
Please take a look and suggest.
Using REUSE ALV GRID to display ALV.
   TYPES: BEGIN OF tp_text_x .
TYPES: tdname      TYPE thead-tdname ,
       tdobject    TYPE thead-tdobject ,
       tdid        TYPE thead-tdid ,
       tdspras     TYPE thead-tdspras ,
       tdtxtlines TYPE thead-tdtxtlines .
TYPES: tdline      TYPE tline-tdline ,
       it_tline    TYPE tline_tab .
TYPES: END OF tp_text_x .
CLASS cl_event_reciever DEFINITION DEFERRED.
DATA v_event_reciever TYPE REF TO cl_event_reciever.
CLASS cl_event_receiver DEFINITION .
PRIVATE SECTION.
    METHODS: close
             FOR EVENT close OF cl_gui_dialogbox_container
             IMPORTING sender.
    METHODS: init_container .
    METHODS: display_textedit
             IMPORTING value(st_text_x) TYPE tp_text_x .
ENDCLASS .                    "cl_event_receiver DEFINITION
CLASS cl_event_receiver IMPLEMENTATION.
METHOD close .
    CALL METHOD sender->set_visible
      EXPORTING
        visible = abap_false.
ENDMETHOD .                    "handle_close
METHOD init_container .
*    DATA: ob_gui_dialogbox_container TYPE REF TO cl_gui_dialogbox_container.
    IF ob_gui_dialogbox_container IS NOT INITIAL .
*    IF EDITOR_CONTAINER IS NOT INITIAL .
      me->close( EXPORTING sender = ob_gui_dialogbox_container ) .   " EDITOR_CONTAINER ).
    ENDIF .
    CREATE OBJECT ob_gui_dialogbox_container
      EXPORTING
        parent   = cl_gui_container=>screen0
        top      = 40
        left     = 200
        lifetime = cntl_lifetime_dynpro
        width    = 600
        height   = 100.
ENDMETHOD.                    "init_container
METHOD display_textedit .
    me->init_container( ) .
    DATA: ob_gui_textedit TYPE REF TO cl_gui_textedit .
*    DATA: ob_gui_dialogbox_container TYPE REF TO cl_gui_dialogbox_container.
    CREATE OBJECT ob_gui_textedit
      EXPORTING
        parent = ob_gui_dialogbox_container.
    CALL METHOD ob_gui_textedit->set_readonly_mode
      EXPORTING
        readonly_mode = cl_gui_textedit=>true.
    DATA: it_tdline TYPE TABLE OF tdline .
    DATA: st_tdline LIKE LINE OF it_tdline .
    FIELD-SYMBOLS: <st_tline> LIKE LINE OF st_text_x-it_tline .
    LOOP AT st_text_x-it_tline ASSIGNING <st_tline> .
      APPEND <st_tline>-tdline TO it_tdline .
    ENDLOOP .
    CALL METHOD ob_gui_textedit->set_text_as_stream
      EXPORTING
        text = it_tdline.
ENDMETHOD.                    "display_textedit
ENDCLASS .                    "cl_event_receiver IMPLEMENTATION
INITIALIZATION.
CREATE OBJECT v_event_reciever.
DATA: ob_gui_dialogbox_container TYPE REF TO cl_gui_dialogbox_container.
CREATE OBJECT ob_gui_dialogbox_container.
START-OF-SELECTION.
v_event_reciever->display_textedit( EXPORTING st_text_x = <st_alv_data_1>-text_1 ) .

Hi, i have doubt in alv field cat log

1)In alv field cat preparation (i dont want to display for one particular field in output screen) can u pls send me the code.
2)in field cat for a particular field i want to display in different color for that can u send me code.
3)code for (DOUBLE CLICK) event.
for the can u send me a code
Regards,
Nagesh

Hi Nagesh,
I think you have posted your question in the wrong forum, this forum is for education related topics only. Please review the existing forums and re-post it to the appropriate one.
Regards,
Simon

How do I get History to show entries that have an empty Name field?

I've noticed that if you go History/Show All History , it doesn't show entries with an empty Name field. If I enter part of the location URL in the "Search History" box (such as a Goggle search) the entries are there (with a Visit Date from yesterday), but if I then click on the Yesterday category, these entries are not shown. I'd expect the "Yesterday" category to show *everything* I visited yesterday.

Thanks @ComputerWhiz - and apologies for the delay in responding.
I disabled Googlebar Lite, and then checked Show All History. I found that things were unchanged: I could search for an item and it would appear, but if I select all items from "this month", those items with a blank name field still didn't show up.
Even if creating an entry with a blank name is not "good practice", I'd argue that Show All History should do just that in all cases, not just when a search term thows up a match.
I'm relieved that it's not Googlebar Lite interferring with the History display, though. Its word seach buttons (that disappeared when Google Toolbar for Firefox was withdrawn) are an essential part of using search, IMO...

How to handle empty Dats field received from SAP RFC response

Hi All,
I am invoking a SAP RFC which gives me a Dats field in response.
A valid dats fields is successfully received by my pipelines.
But when an empty Dats field is received, My pipeline fails and i get error.
How to handle the empty Dats field from SAP

Hi Anant,
This is because the legacy SAP adapter accepted RFC messages with date field empty. In the new version, the same call results in an error. WCF-SAP adapter doesn't allow blank XML nodes.
You need to use the below custom pipeline component as a workaround.
Refer:
Pipeline component for enabling legacy behavior in WCF-SAP adapter.
Rachit
Please mark as answer or vote as helpful if my reply does

Alv field with f4 help without using class

Hi,
Can any one give me a program of "Alv field with f4 help without using class".
Thanking you in advance.

hi
<b>Linking F4 Help to Fields</b>
For the last section, we will deal with linking F4 help to fields. It is easy. As usual, define, implement and register the event onf4 at proper places in your code. For F4 help, you must register the fields whose F4 request will trigger the onf4 event. For this you must prepare a table of type LVC_T_F4 and register this table using the method register_f4_for_fields. While preparing table you must include a line for each field which will trigger F4 event. For each field in the structure;
􀂾 Pass the fieldname to FIELDNAME
􀂾 Set REGISTER to make the field registered,
􀂾 Set GETBEFORE to provide field content transport before F4 in editable mode
􀂾 Set CHNGEAFTER to make the data changed after F4 in editable mode.
DATA: lt_f4 TYPE lvc_t_f4 WITH HEADER LINE .
lt_f4-fieldname = 'PRICE'.
lt_f4-register = 'X' .
lt_f4-getbefore = 'X' .
APPEND lt_f4 .
CALL METHOD gr_alvgrid->register_f4_for_fields
EXPORTING
it_f4 = lt_f4[] .
Preparing table for the fields to be registered to trigger F4 event
METHOD handle_on_f4 .
PERFORM f4_help USING e_fieldname es_row_no .
er_event_data->m_event_handled = 'X' .
ENDMETHOD .
A sample onf4 method implementation
Again, we set the attribute er_event_data->m_event_handled to prevent further processing of standard F4 help.
regards
Ravish
<b>
reward if useful</b>

Empty date fields showing in receipt

Why do empty date fields show in the email receipt even though I have the "Include empty fields" de-selected in the email receipts section? Example from receipt shown.
Date 1: 09/13/2013
Date 2: -
Date 3: -
Date 4: -

Hi,
You will get email receipt and email notification if you check both options. email notification will have all fields summary including empty ones if check the option include a summary of the response data in the email.
email notification title is "form name": Response Received.
email receipt title by default is Form Submission Receipt: Adobe FormsCentral
Please share your form to me if you do see empty field in receipt without checked include empty fields. Here is my email address: [email protected]
Thanks,

To empty alv field declared as WERT

Similar Messages

Maybe you are looking for