To equall the size of all the columns

Hi,
i want to equall the size of all the columns. How can it be done??

If I am getting it properly then you want nto fix the column size but not the data size..correct?.
If it is column size then you can override the column name my clickin on the -->Column Prperties -->Column Format -->Column Heading and give the name with your specified width
(Like Veeresh --which is 7 in width)
Or
Click on Edit formula -->Click on Custom Heading ->Type your own column name of your own width.
If it is data size then
-->Column properties -->Data Format -->Override Default Data format -->Treat number as number -- specify the limit.
Do the same for all columns,by doing so report you will have the data in fixed width.
Marks helpfull or correct if it answres
Regards,
Veeresh Rayan

Similar Messages

In Sales Order changing the column width to see all item desciption?

When in the sales order screen .
Expand the column width of say the item description.
How do I save the column width for all the sales documents for the field item description in sales order ?

Hi,
The column width of the Document will be defaulted to the same size at which the user has saved the last document.
So, if a user has saved the Sales Order with a big column width for the 'Item Description' then after saving and re-entering into the Sales Order, the user can see the same column width for all the Sales Order's.
I hope the above helps.
Cheers~
Jitin Chawla

How can I display all the columns on the screen without scrolling from side to side?

My clinic software has many columns. How can I display all the columns without having to scroll from left to right all the time?

If the software you are using doesn't offer the ability to increase or decrease document size, as many do, then the only way is to increase your screen resolution. If that's not possible, maybe you can decrease your font size? If you can't do any of these, I think you're out of luck!

Export to PDF is not printing all the columns in one single page.

Hi,
I have a report, I am exporting the report to PDF, but ALL the columns are not printing in a single page, It is getting printed 2 or more pages.
I am okay if I have a horizontal scroll bar or if the test size is reduced. Please see the recording and let me know whether it is possible.

Sorry sir, It is a slip of the tongue, I corrected my response already.
So it is defenitely possible to make ALL the columns appear in the same page in PDF regardless of how much width the report occupies?
If yes, can I see a horizontal scroll bar or the text will be shrinked to fit the page?

How to increase the column size of Alv tbale

Hi All,
I created an Alv table to display the content of my database table. In one of the column the entire data from my database are not displayed the last few characters are missing. The data type for that column in the database is char. Can any one help me how to increase the column size in my Alv table or any suggestions to resolve this issue.

Hi Vadiv,
Try with this..
DATA: LR_IF_CONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE,
LR_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE,
LR_CMDL TYPE REF TO CL_SALV_WD_CONFIG_TABLE,
LR_TABLE_SETTING TYPE REF TO IF_SALV_WD_TABLE_SETTINGS.
LR_CMP_USAGE = WD_THIS->WD_CPUSE_ALV( ).
IF LR_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
LR_CMP_USAGE->CREATE_COMPONENT( ).
ENDIF.
" get reference to the ALV model
LR_IF_CONTROLLER = WD_THIS->WD_CPIFC_ALV( ).
LR_CMDL = LR_IF_CONTROLLER->GET_MODEL( ).
LR_TABLE_SETTING ?= LR_CMDL.
" Set column width
DATA LR_COL TYPE REF TO CL_SALV_WD_COLUMN.
LR_COL = LR_CMDL->IF_SALV_WD_COLUMN_SETTINGS~GET_COLUMN( 'PERNR' ).
LR_COL->SET_WIDTH( '70' ) .
LR_COL = LR_CMDL->IF_SALV_WD_COLUMN_SETTINGS~GET_COLUMN( 'ENAME' ).
LR_COL->SET_WIDTH( '100' ) .
LR_TABLE_SETTING->SET_FIXED_TABLE_LAYOUT( ABAP_TRUE ).
You can refer to webdynpro component SALV_WD_TEST_TABLE_PROPS. Go to the view TABLE and look inside the method SET_COLUMN_SETTINGS. I hope this will help you.
Cheers,
Kris.

All the columns of an alv grid report are not downloading in excel in 1 lin

Hi All,
I have some 60 columns in my alv grid report and user can download the report using list->export->localfile->spreadsheet.
What the issue is that all the columns are not downloading in one line, instead they split in two rows.
Please help.
Regards,
Neha Patel

hi,
just use this procedure it will solve your problem:
Firstly export the data to memory using the FM LIST_FROM_MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = t_listobject
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE e000(su) WITH text-001.
ENDIF.
then i converted it into ASCII using LIST_TO_ASCI,
CALL FUNCTION 'LIST_TO_ASCI'
TABLES
listasci = t_xlstab
listobject = t_listobject
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE e003(yuksdbfzs).
ENDIF.
This gives the data in ASCII format separated by '|' and the header has '-', dashes. If you use this internal table directly without any proccesing in SO_NEW_DOCUMENT_ATT_SEND_API1, then you will not get a good excel sheet attachment. To overcome this limitation, i used cl_abap_char_utilities=>newline and cl_abap_char_utilities=>horizontal_tab to add horizontal and vertical tabs to the internal table, replacing all occurences of '|' with
cl_abap_char_utilities=>horizontal_tab.
Set the doc_type as 'XLS', create the body and header using the packing_list and pass the data to be downloaded to SO_NEW_DOCUMENT_ATT_SEND_API1 as contents_bin.
This will create an excel attachment.
Sample code for formatting the data for the attachment in excel format.
u2022     Format the data for excel file download
LOOP AT t_xlstab INTO wa_xlstab .
DESCRIBE TABLE t_xlstab LINES lw_cnt.
CLEAR lw_sytabix.
lw_sytabix = sy-tabix.
u2022     If not new line then replace '|' by tabs
IF NOT wa_xlstab EQ cl_abap_char_utilities=>newline.
REPLACE ALL OCCURRENCES OF '|' IN wa_xlstab
WITH cl_abap_char_utilities=>horizontal_tab.
MODIFY t_xlstab FROM wa_xlstab .
CLEAR wa_xlstab.
wa_xlstab = cl_abap_char_utilities=>newline.
IF lw_cnt NE 0 .
lw_sytabix = lw_sytabix + 1.
u2022     Insert new line for the excel data
INSERT wa_xlstab INTO t_xlstab INDEX lw_sytabix.
lw_cnt = lw_cnt - 1.
ENDIF.
CLEAR wa_xlstab.
ENDIF.
ENDLOOP.
Sample code for creating attachment and sending mail:
FORM send_mail .
u2022     Define the attachment format
lw_doc_type = 'XLS'.
u2022     Create the document which is to be sent
lwa_doc_chng-obj_name = 'List'.
lwa_doc_chng-obj_descr = w_subject. "Subject
lwa_doc_chng-obj_langu = sy-langu.
u2022     Fill the document data and get size of message
LOOP AT t_message.
lt_objtxt = t_message-line.
APPEND lt_objtxt.
ENDLOOP.
DESCRIBE TABLE lt_objtxt LINES lw_tab_lines.
IF lw_tab_lines GT 0.
READ TABLE lt_objtxt INDEX lw_tab_lines.
lwa_doc_chng-doc_size = ( lw_tab_lines - 1 ) * 255 + STRLEN( lt_objtxt ).
lwa_doc_chng-obj_langu = sy-langu.
lwa_doc_chng-sensitivty = 'F'.
ELSE.
lwa_doc_chng-doc_size = 0.
ENDIF.
u2022     Fill Packing List For the body of e-mail
lt_packing_list-head_start = 1.
lt_packing_list-head_num = 0.
lt_packing_list-body_start = 1.
lt_packing_list-body_num = lw_tab_lines.
lt_packing_list-doc_type = 'RAW'.
APPEND lt_packing_list.
u2022     Create the attachment (the list itself)
DESCRIBE TABLE t_xlstab LINES lw_tab_lines.
u2022     Fill the fields of the packing_list for creating the attachment:
lt_packing_list-transf_bin = 'X'.
lt_packing_list-head_start = 1.
lt_packing_list-head_num = 0.
lt_packing_list-body_start = 1.
lt_packing_list-body_num = lw_tab_lines.
lt_packing_list-doc_type = lw_doc_type.
lt_packing_list-obj_name = 'Attach'.
lt_packing_list-obj_descr = w_docdesc.
lt_packing_list-doc_size = lw_tab_lines * 255.
APPEND lt_packing_list.
u2022     Fill the mail recipient list
lt_reclist-rec_type = 'U'.
LOOP AT t_recipient_list.
lt_reclist-receiver = t_recipient_list-address.
APPEND lt_reclist.
ENDLOOP.
u2022     Finally send E-Mail
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = lwa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = lw_sent_to_all
TABLES
packing_list = lt_packing_list
object_header = lt_objhead
contents_bin = t_xlstab
contents_txt = lt_objtxt
receivers = lt_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Hope it will help you
Regards
Rahul sharma

Argument error; the number of columns does not equal the number of parameters.

I am using the Database Toolkit (Enterprise Connectivity) to check for a network connection and then send information from a local database to a SQL database on the network if needed. In development of the code I continue to receive Error 1 and the Possible Reason(s) is "Argument error; the number of columns does not equal the number of parameters." I am using the DBToolsSelectData.VI to retrieve data from the local MDB file and the DBToolsInsertData.VI to write it to the SQL file. The collection of the data from the MDB file is successful and the connection and validation of the table and columns in the SQL file is also successful. The error occurs when the Insert VI tries to build the query. The number of columns being written (attempted) does match the number of columns in the data, they are both 16 string arrays.

Ok, it's taken a bit, and I have a solution! It took a while to figure out what the DCT is doing, but it seems to be working now.
The reason for the original error is that you were passing into the insert subVI an array of variants - which the input to the VI coerced into a single variant. You were getting the error because as far as the insert VI was concerned you were only passing it a single data value. The way to get around that was to create a cluster with one element for each column value, convert the cluster to a variant and pass the result to the insert VI - see attachment.
In terms of the other modifications, I made a copy of the endurance.mdb file, emptied it and used it as the destination for the copy.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
NetworkCheck.vi ‏49 KB

Infoview not displaying all the columns

Hi All,
I have abt 25 columns in my crystal report. Report looks fine in CR designer but when i view the same report in infoview , it doesnt display all the columns. Although i can scroll upto the right but about 10 columns are missing.
Kindly suggest.
Thanks

Hi,
Can you please brief me what the approach you took to solve this issue, because even me facing the same problem and I have 35 columns in my report, I build the report on 11x17 page size.
In that most of them are string type holding the 10 different levels of manager names, employee names and their contact information and few columns are numeric fields
Since I adjusted all the fields to fit into the page, for all the lengthy name columns like "VenkateshwarRao" its showing "Venkat" and rest of the letters are truncated.
So basically the user needs the report to download in Excel format, so currently I m able to export and manually adjusting them by selecting all fields in excel.
But I am not able to show up all fields in info-view, only the first 15 columns are displayed and most of the textual columns are truncated.
Thanks in advacne,
Venkat

How to see all the columns in the spool output of an ABAP program

I have an ABAP program which displays all the columns when I run it manually. (by scrolling to the right using right arrows). When I run that report in the scheduler and when I see the output in the spool in transaction SP01, it does allow me to go to the right to see all columns.
thanks
Ram

Check OSS Note 409339 - Spool requests with ABAP lists with more than 255 columns.
Summary
Symptom
As of Release 4.6x, the ABAP list processor can create spool requests for ABAP lists with a width of more
than 255 columns. However, when you print using the SAP spool, only the start of the list lines is printed,
the rest of the line is truncated at the end of the page.
Other terms
ABAP, lists, print parameter, LINE-SIZE
Reason and Prerequisites
Creating "wide" lists on the screen (in other words, lists in the SAPGUI with more than 255 columns) was
already introduced by the ABAP list processor for Release 4.0B. However, before Release 4.6 these lists
cannot be printed out in the width used on screen.
In older releases (for example, 4.0B, 4.5B), you were not able to generate spool requests for lists with a
width of more than 255 columns:
The system issues error message PT 026: "No. of columns > 255, no standard print-out possible".
Therefore, we did not have the problem described here of non-existing device-type support in 4.0/4.5 for
printing out "wide" lists.
Up to and including 4.6C there are no SAP device types that support print formats for lists with a width of
more than 255 characters). Since Release 3.0A, all SAP device types support a maximum list width of 255
characters with device format X_65_255.
Solution
When you create the spool request and a print dialog box appears, enter a column width of maximum 255
in the "Number of columns" field.
As of Release 4.6D, you have the option of using device type SWIN with the new format X_65_1024/4 when
printing with Windows (see Note 213382).

How to resize Labels size based on the column margin changes in JTable??

I have a constructed JTable with 4 columns. Accordingly, I added 4 JLabels for each column. JTable and JLabels are attached to a scrollpane. That in turn, attached to a JFrame.
What I need is, at the runtime, when I change the column margins of a column in JTable, accordingly, the size/margins of the Labels should change..
I am extending AbstractTableModel in order to populate the data in the table, as I should have a checkbox in the constructed JTable.
Please, help me out in finding a solution for this...

Hi pritam,
The “maintain proportions of window for different monitor
resolutions” property will maintain the proportional size of the front panel
(its x and y sizes) when opened in a different resolution. The front panel
objects will not be resized and will appear larger (and may not fit inside the
front panel) when saved in a higher resolution, and moved to a lower
resolution. You can use the “Keep window proportions” property to achieve the
same results.
To have both the front panel dimensions and front panel
controls scale, you need to have both the above property and the “scale all
objects on front panel as the window resizes” selected. The labels will not be
resized by this.
I tried using both properties on two monitors and noticed
that the change does not occur when the resolutions between the monitors are
different. I had to lower both monitors’ resolution to see the change work
properly.
Please post back if you have any questions. Have a great day!
Ryan D.
District Sales Manager for Boston & Northern New England
National Instruments

Is it possible to adjust the size of the columnes when send alv by mail ?

is it possible to adjust the size of the columns when send alv by mail ?
i send alv ( list ) by mail , work fine but all the columns are small and in the
same size , can i adjust it in the mail ?
how to do it in regular alv i know it .
LS_FCAT-OUTPUTLEN = 29 .

is it possible to adjust the size of the columns when send alv by mail ?
i send alv ( list ) by mail , work fine but all the columns are small and in the
same size , can i adjust it in the mail ?
how to do it in regular alv i know it .
LS_FCAT-OUTPUTLEN = 29 .

JTextField - Setting the column size doesn't work. Help, please.

Hi,
I want to set the column size of a text field from another text field by the input from the user. However, it just doesn't work. The following is my code. Just check out the last anonymous inner class action listener. Somehow i can get the user text, but it just doesn't work.
Thanks for any helpful inputs.
* Introduction to Java Programming: Comprehensive, 6th Ed.
* Excercise 15.11 - Demonstrating JTextField properties, dynamically.
* @Kaka Kaka
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.Border;
import javax.swing.border.LineBorder;
import javax.swing.border.TitledBorder;
public class Ex15_11 extends JFrame{
    // Create two text fields and three radio buttons
    private JTextField jtfUserText = new JTextField(10);
    private JTextField jtfColumnSize = new JTextField(new Integer(10));
    private JRadioButton jrbLeft = new JRadioButton("Left");
    private JRadioButton jrbCenter = new JRadioButton("Center");
    private JRadioButton jrbRight = new JRadioButton("Right");
    public static void main(String[] args){
        Ex15_11 frame = new Ex15_11();
        frame.pack();
        frame.setTitle("Excercise 15.11 - Text Field Property");
        frame.setLocationRelativeTo(null);
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setVisible(true);
    // Start of Constructor
    public Ex15_11(){
        // Set the the frame layout
        setLayout(new BorderLayout(5, 5));
        // Create three panels and two labels
        JPanel jpText = new JPanel();
        JPanel jpHorizontalAlignment = new JPanel();
        JPanel jpColumn = new JPanel();
        JLabel jlblTextField = new JLabel("Text Field");
        JLabel jlblColumn = new JLabel("Column Size");
        // Create a button group for the radio buttons to be grouped
        ButtonGroup group = new ButtonGroup();
        // Group the radio buttons
        group.add(jrbLeft);
        group.add(jrbCenter);
        group.add(jrbRight);
        // set a titled border for a panel
        jpHorizontalAlignment.setBorder(new TitledBorder("Horizontal Alignment"));
        // Create a line border
        Border lineBorder = new LineBorder(Color.BLACK, 1);
        // the all the components to their corresponding panels
        jpText.add(jlblTextField);
        jpText.add(jtfUserText);
        jpHorizontalAlignment.add(jrbLeft);
        jpHorizontalAlignment.add(jrbCenter);
        jpHorizontalAlignment.add(jrbRight);
        jpColumn.setBorder(lineBorder);
        jpColumn.add(jlblColumn);
        jpColumn.add(jtfColumnSize);
        // add the panels to the frame
        add(jpText, BorderLayout.NORTH);
        add(jpHorizontalAlignment, BorderLayout.WEST);
        add(jpColumn, BorderLayout.EAST);
        jrbLeft.addActionListener(new ActionListener(){
            // Handle event
            public void actionPerformed(ActionEvent e) {
                jtfUserText.setHorizontalAlignment(SwingConstants.LEFT);
        jrbCenter.addActionListener(new ActionListener(){
            // Handle event
            public void actionPerformed(ActionEvent e) {
                jtfUserText.setHorizontalAlignment(SwingConstants.CENTER);
        jrbRight.addActionListener(new ActionListener(){
            // Handle event
            public void actionPerformed(ActionEvent e) {
                jtfUserText.setHorizontalAlignment(SwingConstants.RIGHT);
        // Register the listener for the coloum size
        jtfColumnSize.addActionListener(new ActionListener(){
            // Handle event
            public void actionPerformed(ActionEvent e) {
                System.out.println(Integer.parseInt(jtfColumnSize.getText()));
                jtfUserText.setColumns(Integer.parseInt(jtfColumnSize.getText()));
}Edited by: ChangBroot on Dec 16, 2008 6:13 PM

don't forget to revalidate the JPanel after changing the components it holds:
    jtfColumnSize.addActionListener(new ActionListener()
      // Handle event
      public void actionPerformed(ActionEvent e)
        System.out.println(Integer.parseInt(jtfColumnSize.getText()));
        jtfUserText.setColumns(Integer.parseInt(jtfColumnSize.getText()));
        jpText.revalidate();
    });This will tell the jpText JPanel's layout manager to relayout the components that this JPanel holds. It should resize your JTextField. Note that in order to call this from within the anonymous inner ActionListener jpText will need to be declared "final". Either that or declared as a class field.

How do I find the total size of all my Music in iTunes 11?

I'm looking to get a new iPod, either a nano or Touch, so I'm trying to find the total size of all of my Music. Since iTunes 11's interface is so different from previous versions, I don't see a way to view that.

Ctrl B to show top menu
View Show Status Bar to show the grey bar at the bottom with the info you want.
While your there View> Show Sidebar and see if you prefer that.

How to find accurate number of Rows, and size of all the tables of a Schema

HI,
How to find the accurate number of Rows, and size of all the tables of a Schema ????
Thanks.

SELECT t.table_name AS "Table Name",
t.num_rows AS "Rows",
t.avg_row_len AS "Avg Row Len",
Trunc((t.blocks * p.value)/1024) AS "Size KB",
t.last_analyzed AS "Last Analyzed"
FROM dba_tables t,
v$parameter p
WHERE t.owner = Decode(Upper('&1'), 'ALL', t.owner, Upper('&1'))
AND p.name = 'db_block_size'
ORDER by 4 desc nulls last;
## Gather schema stats
begin
dbms_stats.gather_schema_stats(ownname=>'SYSLOG');
end;
## Gather a particular table stats of a schema
begin
DBMS_STATS.gather_table_stats(ownname=>'syslog',tabname=>'logs');
end;
http://www.oradev.com/create_statistics.jsp
Hope this will work.
Regards
Asif Kabir
-- Mark the answer as correct/helpful

Return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST

Hi,
How to return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST?
For example : if the row has 3 columns then after selecting the particular row, the RETURN_TAB internal table should contain all the three column values.
Regards,
Raghu

Hi,
   Try the following...
DATA : it_fields like help_value occurs 1 with header line.
data: begin of w_vbap,
        vbeln      like vbap-vbeln,
        posnr      like vbap-posnr,
        werks      like vbap-werks,
      end of w_vbap.
data: i_vbap   like w_vbap   occurs 0 with header line,
         w_fields type help_value,
      i_dfies type table of dfies,
      i_return_tab type table of ddshretval with header line,
      i_field type dfies.
select vbeln posnr werks
      from vbap into table i_vbap up to 5 rows.
if sy-subrc = 0.
   sort i_vbap by vbeln.
endif.
clear it_fields[] , it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'VBELN'.
it_fields-selectflag = c_on.
append it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'POSNR'.
it_fields-selectflag = space.
append it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'WERKS'.
it_fields-selectflag = space.
append it_fields.
loop at it_fields into w_fields.
    i_field-tabname   = w_fields-tabname.
    i_field-fieldname = w_fields-fieldname.
    i_field-keyflag   = w_fields-selectflag.
    append i_field to i_dfies.
endloop.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield               = 'VBELN'
     window_title           = 'Select'
    tables
      value_tab              = i_vbap
      field_tab                = i_dfies
      return_tab             = i_return_tab
   exceptions
     parameter_error        = 1
     no_values_found        = 2
     others                 = 3
read table i_return_tab into w_return_tab index 1.
if sy-subrc = 0.
endif.
Regards,
Srini.

To equall the size of all the columns

Similar Messages

Maybe you are looking for