To find the field in the work area and pass to some field

Hi all,
My Requirement is something like this .
i have 2 records in my internal table and i the value which i require may be anywhere in that internal table .
Eg.
                 NODE     NODEDESC    PSPHI        PARENT      CHILD     ZLEFT       ZRIGHT
                  ASD         XCCC           ASD                            R.00002
                  CDD         CCCCC         CDD             GHJ
                   FGB         FFFF            R.000005     RFG
                   GHJ        CCCC            CDD             CDD         RFG
Records look like the above pattern so i want to capture the values like R.00002 or any value which resembles R.------
as i need to pass these things to my another function module my question is R.---- can be in any field so how can i get that values.
please help me
Hope i am clear with my question.
Regards,
Sana.

Hi,
Try this way..
Suppose my internal table has 3 fields(A1,A2,A3) and i have two records.
A1 A2 A3
g1   t 2   R1
t1   R1   t2
Loop at itab.
var1 = itab-A1.
var2 = itab-a2
var3 = itab-a3.
if var1 CA 'R'.
move var1 to some variable.
elseif var2 CA '2'.
move var2 to some variable.
elseif var3 CA 'R'.
Move var3 to some variable.
endif.
clear : itab,
           var1,
           var2,
          var3.
endloop.
Regards,
Nagaraj

Similar Messages

Accidentally hit the 'trim comp to work area'. Now I can't get my files back into comp timeline.

I'm using After Effects CC on my macpro. When going to add a shot to the render queue, I accidentally hit the 'trim comp to work area' and didn't notice what had happened until I went to go back to work on other shots. I tried to hit Control Z but it was too late it seemed and it wouldn't go back to how it was. i tried resetting the length of the comp and putting the files back, but no use. Tried making a new comp and copy and pasting all the files in the side panel of my orig comp, but nothing. Tried re-adding the same file from the project window and copying and pasting the effects keyframes from the orig shot to the new one but they didn't line up properly.
I still have all the files in the comp side panel but can't seem to get them back into the now extended timeline. I still have all the effects I've been doing for the past 3 weeks, but can't do anything to get them into a position where I can continue to manipulate them.
I've searched a bunch of forums and can't find this problem anywhere.
Have I lost all my work? Please help.

It appears that you've pushed those layers into negative time, which you can't view in the Timeline. To get the layers back into the Timeline view, you'll need to move the layers in time with keyboard shortcuts. I assume that you've got your layers arranged in an edit, and you want to preserve their relationships, so do the following:
Select all of the layers.
Hold down Alt/Option+Shift and press Page Down until the layers are visible. This shortcut moves layers 10 frames later in time. Removing Shift moves them 1 frame at a time. Using Page Up instead of Page Down will move them earlier in time.
Another useful pair of shortcuts is [ and ], which set the in or out points of the select layer(s) to the current time. But you probably don't want to use those shortcuts in this case because you'll lose the time relationships of your edit.

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

Cannot see the system folder(private work area) in the dependency manager

Hi
I am not able to see the 'system folder'(private work area) in the dependency manager tool.
I have captured the user schema in this folder, and want to see dependency information of objects in it.
Please Help.
Thanks

Hi Guru,
Please go through SAP note # 1333684 and configure accordingly.
Also, follow the note # 1042993, if problem is not getting resolved.
Thanks
Pavan

Ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If within warranty (yours is since the warranty is one year) and not abused, Apple will exchange it at no cost.

One day it just stopped focusing and the pictures are blurry. If I switch it to the front camera it works well and looks like it should but when I turn it back it goes back to being out of focus and I can't figure out how to fix it?

i installed ios 7.after that my primary cam, one day it just stopped focusing and the pictures are blurry. If I switch it to the front camera it works well and looks like it should but when I turn it back it goes back to being out of focus and I can't figure out how to fix it?

This advice will sound like a joke or prank, but believe me it worked on my iPhone 5 and my daughter's. The lens mechanism got stock on each of our iPhones. We found a post on these message boards that said to hold the iPhone about 6 inches above a table or counter top and drop it so that it lands flat on it's back. Now try the camera ...Fixed! It has been more than six months now and neither of our iPhones have ever experienced the problem again.

I previously uploaded images onto my desktop to work on in Lightroom 5.2. I worked on a few of the images days ago and just now getting back to them. My problem is I can only access the images I previously worked on and all the rest it says images not ava

I previously uploaded images onto my desktop to work on in Lightroom 5.2. I worked on a few of the images days ago and just now getting back to them. My problem is I can only access the images I previously worked on and all the rest it says images not available but all the images are still right on my desktop.

... and all the rest it says images not available
Normally this happens because you moved, renamed or deleted these photos (or the folders that contain them) outside of Lightroom. This is how to fix the problem: Adobe Lightroom - Find moved or missing files and folders

Dynamic Work Area and field symbol

Hi All,
I'm have a big internal table like this
data: begin of data occurs 0,
Field01,
Field02,
Field03,
*bucket 1
Field04,
Field05,
Field06,
*bucket 2
Field04,
Field05,
Field06,
*bucket 3
Field04,
Field05,
Field06,
Field 1, 2 3 will be the same for pernr, first last name.
Field 4, 5, 6 are the same format but different numbers (or values ) in different buckets.
Each bucket can be shown (or not) based on the condition of a person, for example if that person live in 2 states, it will show 2 bucket with 2 address info inside each.
I will run this under get pernr to sort out each person who have many address or not.
Can I use dynamic work area and field symbol here? if I can, how?
Really appreciate your help with points...

You can use the ASSIGN COMPONENT ... and than APPEND the work area to the table.
Check out this sample program:
REPORT ZTEST_NP.
DATA: BEGIN OF ITAB OCCURS 0,
      F1    TYPE I,
      F2    TYPE I,
      F3    TYPE I,
      END   OF ITAB.
DATA: WA_ITAB LIKE ITAB.
DATA: L_CNT TYPE I.
FIELD-SYMBOLS: <F_FLD> TYPE ANY.
DO 10 TIMES.    " I want 10 reocrds
CLEAR L_CNT.
DO 3 TIMES.   " I have 3 fields
    L_CNT = L_CNT + 1.
    ASSIGN COMPONENT L_CNT OF STRUCTURE WA_ITAB TO <F_FLD>.
    <F_FLD> = L_CNT.
ENDDO.
APPEND WA_ITAB TO ITAB.
CLEAR ITAB.
ENDDO.
LOOP AT ITAB INTO WA_ITAB.
WRITE: / WA_ITAB-F1,
           WA_ITAB-F2,
           WA_ITAB-F3.
ENDLOOP.
Regards,
Naimesh Patel

I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI sign

I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI signal I have to be glued to the router, and I did everything he says is supported by the Apple and all other pages and forums regarding this problem is not solved and always disconnects when connected always disconnects again!! passing will be settled as no longer factory warranty although it has neither the three months I renewed new, please help because the investment has been great and I can not use only as "a mirror" I'm waiting a true solution, thanks ....
Sincerely,
Catlos

This does help me because I am pondering on wether to buy an airport extreme to solve my ipad 2 connection woes. I have an extremely old router dLink 524....but I have NEVER had any problems with it at all ever. My xbox connected great to it and netflix ran flawless through my xbox.....now I have an ipad2 and an apple tv and they are BOTH having horrible connection problems. I have read most of the forums on how to fix it by changing the settings on my router but since mine is so old I couldn't do some of the suggested solutions. So here I am debating on whether to spend all this $ on an airport extreme? I am just hoping that if I go and purchase this, my connectivity issues problems will go away like yours did. Just wondering if you have ATV as well and if the AE solved its problems? I have read about AE solving ipad2 wifi problems, I'm just hoping it will solve my ATV as well.
**Glad they didn't "moderate into extinction" your post yet, lol, Thank

How do I get the function browser to appear when I types an = sign in a cell-The fn browser was working OK and then quit appearing---

How do I get the function browser to appear when I type an = sign in a cell-The fn browser was working OK and then quit appearing---

I just stumbled onto the answer---The format sidebar must be selected before the function sidebar will appear--Did not see this in the help section--maybe just overlooked it--

HT4972 I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrad

I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrade?

try rebooting your computer.

Adobe Story - I am trying to install the desktop application (to work offline) - and it fails whilst initializing

Adobe Story - I am trying to install the desktop application (to work offline) - and it fails whilst initializing
Any ideas?

Hi Four23olly,
Please follow the article: Troubleshoot download and install issues to resolve your installation issues with Creative Cloud Desktop Application.
Thanks,
Ratandeep Arora

Can't open the illustration. There is not enough room for the window. Increase document area and try again?

When i double click on a file in AI (CS6) I get the message: Can't open the illustration. There is not enough room for the window. Increase document are and try again

We can't know. We know nothing about your system nor your documents since you haven't told us.
Mylenium

I lost my iPhone 3 days ago.. it wasn't connet to internet and I don't know how find it without the connection.. please help me and give me some advices!!

I lost my iPhone 3 days ago.. it wasn't connet to internet and I don't know how find it without the connection.. please help me and give me some advices!!

Change your passwords.

Internal table declaration - work area and body

Hi all
I have declared my internal table in my program as
data : itab_wa type ZRESULT_LINE,
       itab    type ZRESULT_ROW.
Where ZRESULT_LINE and ZRESULT_ROW are the structure and table types.
Now I want to add
data: TCOLOR TYPE SLIS_T_SPECIALCOL_ALV.
in my internal table declaration. How can I do this. Please remember I need to have work area and body in my internal table as I have used work area and body in my code.
Waiting..............
Message was edited by: Raju Boda

HI,
See the Declarion types of workarea and Internal tables
* Table declaration (old method)
DATA: BEGIN OF tab_ekpo OCCURS 0,             "itab with header line
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF tab_ekpo.
*Table declaration (new method)     "USE THIS WAY!!!
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,      "itab
      wa_ekpo TYPE t_ekpo.                    "work area (header line)
* Build internal table and work area from existing internal table
DATA: it_datatab LIKE tab_ekpo OCCURS 0,      "old method
      wa_datatab LIKE LINE OF tab_ekpo.
* Build internal table and work area from existing internal table,
* adding additional fields
TYPES: BEGIN OF t_repdata.
        INCLUDE STRUCTURE tab_ekpo. "could include EKKO table itself!!
TYPES: bukrs TYPE ekpo-werks,
       bstyp TYPE ekpo-bukrs.
TYPES: END OF t_repdata.
DATA: it_repdata TYPE STANDARD TABLE OF t_repdata INITIAL SIZE 0,   "itab
      wa_repdata TYPE t_repdata.                 "work area (header line
you need to maintain same structure for both workarea as well Internal table
Regards
Sudheer

To find the field in the work area and pass to some field

Similar Messages

Maybe you are looking for