TO Read the data from the I/P payload of the proxy

I want to know is there any function module or report available to read the data from the
payload of the proxy. As we can see the data in the input payload for the prticular
message in sxmb_moni tcode.Is there any table where this data will be stored.
And also I have to update one Ztable with XML Message ID,Sender Interface Namespace,
Sender Interface Name as and when this proxy is triggered. For this I will have to implement the
class for the interface in the sproxy tcode and in this implementation i will update this
ztable but my problem is how will i get this values there.
In debugging I found one report rsxmb_display_msg_vers_new is submitted in sxmb_moni to show ll these details but
looking specially foe the paylod data.
Your help is highly appreciated.
Thanks.

Hello PawanG ,
It is very simple to find out all DB tables involved in the rsxmb_display_msg_vers_new . Steps below:
1. run tcode SE30
2. click "program" radio box, input RSXMB_DISPLAY_MSG_VERS_NEW as program name, click "Execute" button.
3. input an valid message uuid in the "Message GUID" field and execute.
4. go back to SE30,click "Evaluate" tab
5. click "DB tables".
Then all DB table name and description are listed there. I am sure you can find what you need. Good luck!
Best Regards,
Jerry

Similar Messages

How to read the data from excel file and store into the table?

Hi All,
I have table with BLOB datatype contains a excel file. I have to read that data from excel and store into one table with all the fields in excel.
All the excel fields and my table columns are same.
Can you share with me how can acheive this using LOB's?
Thanks

Hi OraSuirya,
you can try with external tables .
syntax as follows
create table ext_table_csv (
i Number,
n Varchar2(20),
m Varchar2(20)
organization external (
type oracle_loader
default directory ext_dir
access parameters (
records delimited by newline
fields terminated by ','
missing field values are null
location ('file.csv')
reject limit unlimited;
For this you need to create directory
Directory Creation syntax:
create or replace directory ext_dir as 'D:\oracle\user_dir\ext_dir';
grant read, write on directory ext_dir to <User>;
please paste the excel file in the particular directory .
I hope this will help you.
Please correct me if I am wrong anywhere .
Thanks,
Tippu.

Export is not exporting the data from Page. It always gets the data from VO

Hi,
I have got a critical issue, where I am Not able to export the current data from the page.
I have an export button and the VO is attached to it.
1) My page will execute the VO and I do some calculations to remove some rows, add the grand total etc.
2) The export button just re-executes the query and exports, which is not that, I want. I would like to export the current contents of the VO, which I manipulate and it is shown on the page.
To give an example -
My VO query is executed, when I click the Report button. I then adds Grand Total row to the VO and it gets displayed on the Page also.
Now, when I click the export button, it just exports the data which is coming from the VO SQL query, whereas I want the data from current state of VO i.e. with the grand total, which I added and is coming on the page also.
I will be really grateful, if someone can help me with this as it is really urgent.
Thanks for your help.
Shiju

Hi Shiju,
Is the export to csv opening fine with the data showing in individual columns when opening from internet explorer. What version of IE are you using? For us the export works fine from Firefox but does not work well in IE. From IE, the data shows with the commas in a single string. Appreciate your response as it will help us understand if our issue is local to our environment.
Thanks.

How to pass the data from a pop up window to the parent window

Hi All,
I have a jsp page which contains a add button, while clicking it a popup will come out(which is a another jsp page). There are some input fieldsand a submit button. Now how could I send the data from the pop up to the parent winow. Also I have to check that if the pop up is open and I click add button then another pop up must not open.
Plz reply its urgent
Thanks and Regards
Rajib Sharma

Thanks for the reply
But it not worked
I have a jsp page and the popup is also a jsp page the data that is passed from the popup window to the parent must be send to the server from the parent window to get a data from the data base as search result. Its of no use to get it as js data
Thanks and regards
Rajib Sharma

Pull the data from Azure sql and load into the on premises data base

Hi friends,
I have small requirement here, I have to pull the data from Azure sql and load it to the on premises data base.
I am using Azure sync process to do that, but it will take so much time to do that..
I know that azure have some limitations, is there any other way to do this..
Please help me on this...

Hello,
Check the program...
SAPBC480_DEMO.
Check the below threads
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/88e7ea34-0501-0010-95b0-ed14cfbeb85a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
Thanks
Seshu

Can I use iTunes backup/restore or iCloud to 'mash' together the data from two iPhones? In particular, the pictures and notes are of importance. Background: iPhone 4 died, bought new 4S while other was being repaired. Need to keep all data from both.

Thanks in advance!

When you perform a restore from one backup, the device is first wiped. So you can't mash together two backups using restore.

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

Reading the data from XML Source

Hi
i want to read the data from XML source file, and update the transaction information to another XML file. how we can do this in ADF, please help
Thanks
nidhi

you may use normal Java API to do that
http://www.javablogging.com/read-and-write-xml/

Read data from db and write it into the txt file

hi all
could anyone please help me regarding the following:
i would like to read the data from database using sql query and the write the data into a text file.
I am able to connect the db, run the query, create file...but not knowing how to write the data into the file.
could anyone please help me out.
thanks in advance
regards
sasasa
Edited by: sasasa on Sep 14, 2009 8:57 AM

i would like to read the data from database using sql query and the write the data into a text file.
I am able to connect the db, run the query, create file...but not knowing how to write the data into the file.
There must be something that I am missing.
How is it possible to be able to navigate JDBC, run a query and create a file but not know how to write to it?

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication.
I use LabVIEW to read the data from serial communication then, i open the example (.vi) from Serial Communication - Advanced Serial Write and Read from LabVIEW Example. BUT it have some error message that : Error - 1073807202 occured at property node in visa configure serial port (instr).vi -> advance serial write and read .vi
this error code is undefined. no one has provide a description for this code, or you might have wired a number that is not an error code to the error code input.
I don't know why? please help me. thank you.

When I copy that code into "Explain Error" I get: "VISA: (Hex 0xBFFF009E) A code library required by VISA could not be located or loaded."
You may have a bad install of VISA or the wrong version of VISA loaded. Try re-installing VISA. You can get the latest version from the NI support site: http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=1....
Also ensure that you are not pointing the example towards a serial port that does not exist.
Please let us know what you find and what gets this working for you.
Rob

What is the 'quickest' way to read char data from a txt file

Hello,
What is the 'quickest' way to read character data from a txt file stored on the phone to be displayed into the screen?
Regards

To be even a bit more constructive...
Since J2me does not have a BufferedInputStream, it will help to implement it yourself. It's much faster since you read large blocks at ones in stread of seperate chars.
something line this lets you read lines very fast:
while ( bytesread < filesize ) {
         length = configfile.read( buff, 0, buff.length );
         // append buffer to temp String
         if ( length < buff.length ) {
            byte[] buf = new byte[length];
            System.arraycopy( buff, 0, buf, 0, length );
            tmp.append( new String( buf ) );
         } else {
            tmp.append( new String( buff ) );
         // look in tmp string for \r\n
         idx1 = tmp.toString().indexOf( "\r\n" );
         while ( idx1 >= 0 ) {
            //if found, split into line and rest of tmp
            line = tmp.toString().substring( 0, idx1 );
         /// ... do with it whatever you want ... ////
            tmp = new StringBuffer( tmp.toString().substring( idx1 + 2 ) );
            idx1 = tmp.toString().indexOf( "\r\n" );
         bytesread += length;
      }

How to pass the data from a input table to RFC data service?

Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.

Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks.

Is there a simple way to retrieve the data from a resultset using JavaBean?

I have a result set from a select * from users where userid = xxx statement. However, at the moment I have had to hard code the remainder of the code to get the data from each column as I need the column name as well as its data.
I had read somewhere using java beans and reflection it is easier. But i do not know know how.
Is there a simple way to retrieve the data from a result set ?
thanks in advance-
kg

Well, it is not really simple. But there are Open Source components to simplify it for you. See e.g http://www.must.de/Jacompe.htm - de.must.dataobj.DataObject and its subclasses. Feel free to contact me if you have any questions: [email protected]

Saving the data from an interactive adobe form

Hi Gurus,
I want to know how to upload the data from an interactive form (i.e the data sent by a person via email or URL.It is in XML format) into the SAP database.
Thanks,
Raj

Hi Vaibhav,
I have designed an the interactive form which works both online and offline.In offline scenario when i am uploading the form the data form fields which has cardinality 1:1 are being fetched but how wil i fetch the data for the node of cardinality 0:n. i have used the code :
node = document->find_from_name( name = 'attr' ).
attr = node->get_value( ).
attr is the attribute name of some node named node_info.
When i use this code it fetched only the first line of the table i.e only the first value.
How will i fetch the values for rest of the rows.Can u please guide me on this
will reward points for sure.
Thanks and Regards,
srividya.

How to retrieve the data from SAP database.

Hi Pals,
How to retrieve data from SAP R/3 System to my third party software. I will make my query little bit more clear. There is a list of assets entered and stored in the SAP system. For example 3 mobile phones.
1) Mobile 1- Nokia
2) Mobile 2 - Samsung
3) Mobile 3 u2013 Sony
Now think I do not know what all assets is there. I have to retrieve the data and get it on my third party software. Just display the list of assets. Lets say SAP XI is also there. Now how will I map it and get the details.
Please give me step by step method.
N.B: Just to read the data from SAP database.
Please make the flow clear step by step.
Thanking you
AK

Hi,
You can use RFC or ABAP Proxy to make synchronous call with SAP.
Under RFC or ABAP Proxy Program you can get the data from SAP tables. Direct access to SAP Database is not preferrable even if its possible.
The better way to go for RFC or PROXY.
You will send the request from Third party system and the it will be as input parameters from RFC/ Proxy it will response based on it.
This got it all..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
HTTP to RFC - A Starter Kit
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Refer
Thanks
Swarup
Edited by: Swarup Sawant on Jun 4, 2008 9:32 AM

How to display the date from callender for more than one date format items

i have one form which contains many date format items. i want to show the calendar and take the date from calendar.
i am successfully show the calendar and take the date from calendar for one date item.
my problem is i want to do same for all date format items in the form
can any one help me?
thanks

Maybe you could provide more information.
What calendar ? what item works ? what other don't ?
is the issue in the different format masks ?
Please elaborate more your situation.
Francoisit is not the issue of different format masks.
i created a block which name is jbeanblock. in this block item is bean. bean has one trigger when_custom_item_event.
the code of this trigger is :
DECLARE
eventName varchar2(30) := :system.custom_item_event;
eventValues ParamList;
eventValueType number;
LC$Date varchar2(256);
LC$Day varchar2(256);
LC$Month varchar2(256);
LC$Year varchar2(256);
v_date date;
BEGIN
IF (eventName='CALENDAR_EVENT') THEN
eventValues := get_parameter_list(:system.custom_item_event_parameters);
get_parameter_attr(eventValues,'CALENDAR_EVENT_DATE',eventValueType, LC$Date);
get_parameter_attr(eventValues,'CALENDAR_EVENT_DAY',eventValueType, LC$Day);
get_parameter_attr(eventValues,'CALENDAR_EVENT_MONTH',eventValueType, LC$Month);
get_parameter_attr(eventValues,'CALENDAR_EVENT_YEAR',eventValueType, LC$Year);
Clear_Message;
select to_date(LC$Day||'/'||LC$Month||'/'||LC$Year,'dd/mm/yyyy') into v_date from dual;
:ds_employee.hiredate:=v_date;
synchronize ;
END IF;
END;
hiredate is the item of the ds_employee table. hiredate has trigger when_new_item_instance. The code is
Set_Custom_Property('JBEANBLOK.BEAN',1, 'SHOW_CALENDAR','50,50');
ds_employee is my table name. which has 2 date items. one is hiredate and another is date_of_birth.
for hiredate it is working. if i want to do same thing for date_of_birth also then how can we do?

TO Read the data from the I/P payload of the proxy

Similar Messages

Maybe you are looking for