Too many simultaneous persistent searches

The Access Manager (2005Q1) in our deployment talks to load-balanced Directory Server instances and as recommended by Sun we have set the value of the property com.sun.am.event.connection.idle.timeout to a value lower than load-balancer timeout.
However on enabling this property, we see the following error messages in the debug log file amEventService:
WARNING: EventService.processResponse() - Received a NULL Response. Attempting to re-start persistent searches
EventService.processResponse() - received DS message => [LDAPMessage] 85687 SearchResult {resultCode=51, errorMessage=too many simultaneous persistent searches}
netscape.ldap.LDAPException: Error result (51); too many simultaneous persistent searches; LDAP server is busy
Any idea - why this occurs?
Do we need to modify the value associated with the attribute nsslapd-maxpsearch ?
How many Persistent searches does Access Manager fire on the Directory Server ? Can this be controlled ?
TIA,
Chetan

I am having an issue where the Access Manager does not seem to fire any persistent searches at all to the DS.
We have disabled properties which try to disable certain types of persistent searches and hence in reality there should be lots of persistent searches being fired to the DS.
Also, there does seem to be some communication between the DS and the Access Manager instance. ....as the AM instance we work on talks only to a particular DS instance. But they do not seem to find any persistent searches being fired from our side at all....the only time they did see some persistent searches was when I did a persistent search from the command line.
What could be the issue??
thanks
anand

Similar Messages

Help needed : javamail Too many simultaneous connections

Hello
i'm using javamail to develop a webmail
i've created a service Class , and all things works well , but i have a serious problem when i browse my webmail ( viewing folders: inbox / spam / etc or messages) i get an error saying :
Too many simultaneous connections. (Failure)
i know that the imap server dosen't support more than 10 simultaneous connections.
But i can't say to users using my webmail to do not a lot of actions !!! , and also when i use thunderbird for example it works fine without errors even if i do a lot of actions/connections
How can i solve that problem ?
Thanks
A1 OK [email protected] authenticated (Success)
A2 CAPABILITY
* CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1
A2 OK Success
A3 SELECT INBOX
DEBUG: no connections in the pool, creating a new one
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen \*)]
* OK [UIDVALIDITY 616267767]
* 7 EXISTS
* 0 RECENT
* OK [UNSEEN 1]
* OK [UIDNEXT 90]
A3 OK [READ-WRITE] INBOX selected. (Success)
A4 STORE 1 +FLAGS (\Seen)+
+* OK Gimap ready for requests from MyIP 24if2631473eyx.55+
+A0 CAPABILITY+
+* 1 FETCH (FLAGS (\Seen))+
+A4 OK Success+
+* CAPABILITY IMAP4rev1 UNSELECT IDLE NAMESPACE QUOTA XLIST CHILDREN XYZZY+
+A0 OK Thats all she wrote! 24if2631473eyx.55+
+A1 LOGIN myemail mypwd+
+A1 OK [email protected] authenticated (Success)+
+A2 CAPABILITY+
+* CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1
A2 OK Success
A3 SELECT INBOX
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen \*)]
* OK [UIDVALIDITY 616267767]
* 7 EXISTS
* 0 RECENT
* OK [UNSEEN 1]
* OK [UIDNEXT 90]
A3 OK [READ-WRITE] INBOX selected. (Success)
A4 STORE 1 +FLAGS (\Seen)
* OK Gimap ready for requests from MyIP 23if2388548eya.46
A0 CAPABILITY
* 1 FETCH (FLAGS (\Seen))
A4 OK Success
* CAPABILITY IMAP4rev1 UNSELECT IDLE NAMESPACE QUOTA XLIST CHILDREN XYZZY
A0 OK Thats all she wrote! 23if2388548eya.46
A1 LOGIN custom.infoma1 mypwd
A1 NO [ALERT] *Too many simultaneous connections. (Failure)*
A2 LOGOUT
* BYE Logout Requested 23if2388548eya.46
A2 OK Quoth the raven, nevermore... 23if2388548eya.46
A4 CLOSE
A4 CLOSE

Thunderbird supports disconnected or offline operation. It can disconnect from the server and then reconnect later
and synchronize its state, so that you never know it was disconnected.
You can do that too, but it's a lot of work.
For webmail, the simplest approach is usually to have only one folder open at a time for each user.
If your IMAP server is limiting you to 10 connections total, across all users, get a new IMAP server.

I can´t send or receive emails theres a message Too many simultaneous connections. (Failure)

What can I do if theres a message that says Too many simultaneous connections. (Failure) an error in IMAP conection
I can´t send or receive any emails

Hi monic,
I'm sorry to hear you are having mail issues on your Mac. I'm a bit unclear exactly which version of OS X you are currently using, but if you continue to have issues sending or receiving emails, you may find the troubleshooting steps outlined in the following article helpful:
OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
Regards,
- Brenden

Too many simultaneous connections. (Failure)

Hi there,
Here are the facts:
Two MAC MINI. Both OS X 10.9.2. One from 2009 and the second from 2010. Both are using same MAIL application with same version. On both MAIL I set three GMAIL accounts that were working perfect last week. A day ago on MAC 2009 the GMAIL accounts stopped working anymore due to that error.
There is no other gadgets in house using any kind of email application to read Gmail emails. Mac 2009 is on LAN while MAC 2010 is on WiFi. Both are logged to same router so there are using same Internet connection: a Fiberlink 100Mb connection.
There are a total of 7 email accounts set on each MAC. The rest are working fine.
Why I have that issue only on MAC 2009? How can I solve it?
Warm regards,
Sebastian

I will support your theory on the cable modem being the problem.
My internet connectivity was horrible with an Aris. Oceanic provided me a new cable modem (a Ubee). It was still horrible.
Using netstat I found "tons" of TCP connections in other-than "ESTABLISHED" state.
Neither the Aris or the Ubee had an obvious way of configuring it into "bridge mode".
After a lot of searching around I found this link:
http://www.jaredwatkins.com/2011/01/putting-the-ubee-cable-modem-from-time-warne r-in-bridge-mode/
There are other links that provide the same information. You should refer to more than one before you muck around with this.
Once set in bridgemode, DHCP/NAT functionality was performed by my Apple Airport Express (Tower). Netstat now rarely shows connections in anything other than ESTABLISHED state.
I will be replacing my rented Ubee with an owned Motorola next week which will save me about $6/month. The Ubee will still be here but only to provide phone service. (Although Oceanic might provide a different kind of modem.)

The server for account "Gmail" returned the error "[ALERT] Too many simultaneous connections. (Failure)." Your username/password or security settings may be incorrect. Would you like to try re-entering your password?

Continually receive this message when working - can not be on Safari and doing email at same time. I talked to Apple support and they say it is a Microsoft issue and Microsoft says it is an Apple issue, but very very painful to keep getting this message all day.
Thanks

http://support.google.com/mail/bin/answer.py?hl=en&answer=97150
Long thread with several suggestions...
https://discussions.apple.com/thread/2547839?start=15&tstart=0

Iphone 5 I do not go out or do not appear in upgrede AirPlay for ios 7.0.4 safari browser is not smooth and too long kept out the phrase "safari can not search for too many repetitions search"

iphone 5 I do not go out or do not appear in upgrede AirPlay for ios 7.0.4 safari browser is not smooth and too long kept out the phrase "safari can not search for too many repetitions search"

AphexTwin wrote:
- no Apple input?
Of course not. Didn't you bother to read the TOU of this forum? This is a USER TO USER technical support forum. Apple doesn't post here.

Cant' search for keywords - there are too many of them

It's probably a known bug/issue, but when you have to many keywords, you can't search for all of them.
This grey box pops up with all your keywords, which are ordered alphabetically. Unfortunately I'm not able see my keywords from A to L, because there are too many.
Here is an image to further illustrate what I mean.
http://farm4.static.flickr.com/3222/23789607331e284cabe4o.jpg

Thanks, what a bummer . I was hoping for a fix or a freeware solution :P.
Is there a way to notify Apple about this? Keywords seem poorly designed, or at least not thought through, compared to other programs.

Keyword Search showing too many photos

I have over 22,000 photos and over 300 keywords for them. Sadly I cannot search by keyword since the keyword list only shows the last 146 keywords on the screen (a known bug that, in my case, only shows keywords beginning with p-z) and there is no way to scroll to any keywords before it. I have therefor taken to entering the keywords manual in the "all" field, which worked fine in iPhoto 08, but reveals way too many photos in iPhoto 11. From what I can tell, if there is one photo with that keyword in any given event, it will show me every photo in that event. So, for example, if I want to see "Jane" and there is one photo of Jane in the Hawaii" event, it will show me every photo in the "Hawaii" event.
I have occassioanlly stumbled upon workarounds for this, I think entering a space after the keyword or something, but can't recall any concrete solution that seems to work now. Can anyone help me with this extremely frustrating problem? (And I know about Smart Albums. That won't solve this one.)

Did you ever solve this problem. I have it too and it's driving me crazy.

Dimension Filter LOV - Too many results; Refine your search

Hi,
I am using Dimension filter in Design Studio which uses the hierarchy dimension. In the preview mode the filter is not showing any members instead its asked to use the search functionality. I understand there is a limit in retrieving the LOV. Is anyway i can increase the number of LOV?
I need to have this functionality work, The user want to navigate the hierarchy in the filter. Please any help highly appreciated
Thanks
VJ

Hi,
same question here: DS 1.2 - Too many results; refine your search
Regards,
David

While surfing web too many website redirect occurs on safari as well as Google search. I am using wifi. This problem not there on my pic which is connected through wired modem

While surfing web too many website redirect occurs. I am using wifi. some times it redirects to sexual sites some times to App Store. I tried after deleting history and cookies also. I am using safari and Google browser. I changed router configuration and password but problem still exists.

Hi! Thanks for your quick reply.
A few things happened since I've posted this.
1)I've deleted all the history and cookies from my macbook safari and when I opened the website with the issue, the problem did not happen this time.
2)Seeing this, I've deleted my history on iPhone's safari and opened the same website but the problem was there again.
3)The problem does not happen on iPad.
So, I do not have the problem at all on Google Chrome but on Safari (now just on iPhone)
Is this still about my router settings? If so would changing my phone DNS settings would suffice? Or do you think the problem might still remain on my computer as well?
This is so frustrating for a person who does not know anything about technology at all
Thank you!

Firefox crashes when too many images are opened

Okay, so, a problem that appeared in 4.0 for me, and hasn't gone away ever since.
The problem is basically summarized in the short description - whenever too many heavy images are in the browser's tabs simultaneously, it slows down to a halt; then sometimes as I scroll it fails to redraw the page, with black non-redrawn area increasing as I scroll and disappearing as I change tabs back and forth.
After a dozen seconds of such sad behaviour, the browser crashes.
Sometimes, however, things go better. And it just crashes.
The problem can be easily replicated with Save Images extension, say, on any photo hosting, or by opening
http://danvolodar.livejournal.com/friends/big_picture
It should be noted that 3.6 never had that problem, and opened pages where I aggregated thousands of images, - slowly, of course, but it ''did'' work. 4 and 5 do ''not''.

Go to the address '''about:crashes''' and tell us your latest crash IDs. We can then look at the data specific to your crash and have a better idea of what is causing the problem.
Or you can go to '''Start''' and type in the Vista search box '''%APPDATA%''' then click on '''Roaming''' then go to '''Mozilla>Firefox>Crash Reports>Submitted''' then open the .txt files and copy the Crash report ID that starts with '''bp-xxxxx-xxxx'''

Slow system and too many details after upgrading to OS/Lion

This MacBook Pro is my right hand, I was doing so great with Snow Leopard, Now everything takes twice longer. I cleaned up, reseted, reinstalled softwares, etc. same.
Too many details that doesn't work correctly.
-Safari constantly needs to be loading. Some times Firefox.
The track pad cant keep open a display box with a long list, once you try to scroll down.
-Preview, i used this app a lot, safe me time, DUPLICATE? instead of SAVE, i don't see the purpose. After editing images and safe them, gamma, color patterns and light appear distortion.
-iTunes volume doesn't comeback after using Skype or another app, remains low.
-Airport takes a bit longer to find a local network.
-There is not an extra space for the left and right scroll bottom on the finder window, sometimes this one disappear but mostly remains which makes it pretty tricky to open the last file at the bottom of the list. because the scroller is on front.
-External Drives, takes longer to connect or disconnect them.
Suggestions before i reinstall Snow Leopard.

guizz,
it sounds like you have come across the mother of all problems but i would like to help as much as i can.
first of all, i noticed that it took a few days after installing lion before my system was back to the full stride it had while running snow leopard give it some time and a few updates and lion should speed up because components such as ram take time to adjust.
the duplicate thing in preview is a new thing that came out with versions, one of the many new features in lion. i think it takes the place of the SAVE AS... command and you should still be able to save using the old command-s keystroke however part of lion includes an autosave feature so you really never have to worry about saving your work.
i personally cannot speak for safari or firefox even though i have both because i use google chrome as my web browser you can always give that a try.
in the system preferences under the general settings option you can change how the scroll bar is displayed on the screen.
i would suggest searching for other people who have had similar problems with itunes to try and find an answer
as for everything else your system may just need time to adjust to lion
good luck hope this helped a little

Can't figure out how to make "sub-tabs" / Too many "top-tabs" / Other ?

First of all, the website that I am webmaster for is: www.cindydennis.org .
I am having some problems:
1) There are TOO MANY tabs at the top. I can't figure out how to make sub-headings on one page...
For example, I'd like on the "About CDM" page, tabs that can be clicked on to go to other information tabs, but that don't end up appearing on the top (e.g.: having "Remarks" and "What We Believe" tabs go there, but not appear at the top).
Another example, if you look at the home screen, I'd like to have the link to the "Privacy Policy" and Terms of Service" pages on the bottom, but not have them appear as tabs in the top, too.
How do I do this, please? I've searched, and can't figure out/___sbsstatic___/migration-images/migration-img-not-avail.png
2) How do I add "Copyright 2011" automatically? I saw in the Rapidweaver trial version, it automatically adds it when you publish... is there a way to tell this program to do this? Or do I need to type that in on each page? (I don't want to purchase RW... I'm not ready for that yet.)
Thank you in advance
Cindee

Cindee ~ One way to do the copyright notice is to use a Text Clipping — Select (highlight) the copyright text you want to use and drag it to the Desktop. If necessary, change the name of the Clipping icon so that it's more easily identifiable on the Desktop. Then, when you need it in iWeb, simply drag the Clipping icon from the Desktop to iWeb's main canvas.
By the way, rather than posting your URL here like this:
www.cindydennis.org
...include the prefix to make it conveniently clickable:
http://www.cindydennis.org

Is it possible to have too many keyframes in one project in Premiere?

Hi all,
I'm using Premiere 6 on a Windows 7 ULT machine.
Is it possible to have too many keyframes in one project in Premiere?
I'm getting app crashes when I try to re-open a certain project in Premiere 6 and it seems that if that file has over 93 keyframes, then it will not re-open. But I can re-open that exact same project file with 93 keyframes in it, no problem.
But if I go any further and create any more keyframes than 93 in a new re-saved version of the exact same file, then that file will not re-open and I get an app crash... you can see screenshots of the two Windows app crash info panels below that I'm getting from three different bad Premiere project files that I've created so far.
I've tested and tested what is going on here and this seems to be what is causing the bad files. I've re-created the scenario and re-created files with over 93 keyframes from the same base project file that will still open... as soon as I get more than 93 keyframes in this file, then that newly saved file will not re-open after I close and try to re-open it.
This is 75 keyframes in one still image clip, 14 keyframes in another still image clip and 2 keyframes each in two other still image clips in a single project file... that is the limit... if I create any more keyframes in the clip that has 75 keyframes, the new file will save and render, but it won't re-open once it has been closed.
The two slightly different app crash info panels show, in the first one below,
"Fault Module Name: StackHash_e98d"
... and the second one shows,
"Fault Module Name: PREMINFO.dll"
... both messages with a little more different info in each one. I get either of the two error info panels when trying to re-open all three bad files that I've created with over 93 keyframes in them. That is, two of the files alternate between giveing "StackHash_e98d" and "PREMINFO.dll" when trying to open them and one of them always shows the "Fault Module Name: PREMINFO.dll" error.
So even the error messages are inconsistent with two of the bad files.
I've searched the internet for this error in association with Premiere and I've also searched on this forum and found nothing. Can anyone shed any light on this?
Thanks,
digi

Bill,
Even though I figured out a work around, I was still interested to know if these file opening crashes are related to Virtual Memory.
So on the topic of Virtual Memory... a few months ago I was troubleshooting a different problem in Premeire and I found this information...
"To improve performance in Premiere Pro, adjust the size of the paging file to a maximum of twice the amount of installed RAM."
Previous to that time three months ago or so, I had my Virtual Memory settings at the default automatic setting, but I tried setting my VM to twice the amount of installed RAM, and I've had it set that way ever since, just to make sure I'm optimizing the VM performance for Premiere and other apps.
But that isn't making any difference in this case. Today I also found information in a search that says to troubleshoot StackHash crashes, one should turn off "DEP" in the system settings for the application with the crash problem... according to the paragraph below, from the second post down by Chris on this tdistler.com page... http://tdistler.com/2009/04/10/stackhash-and-application-crashes-on-windows
Even though this was written in 2009 with Windows Vista in mind, many things for Vista work in Windows 7... it says,
"Here’s how 99 percent of Vista users can fix a StackHash failure. I’ll walk you through it step by step:
Method A:
1. Open your Start menu and click Control Panel
2. Browse to “System Maintenance” then “System”
3. In the left panel, select “Advanced System Settings” from the available links
4. You should now see the System Properties Window, which will have three sections. The top section is labeled “Performance” and has a “Settings” button. Click this button.
5. Select the “Data Execution Prevention” tab.
6. Select the option which reads “Turn on DEP for all programs and services except those I select”
7. Use the “Browse” button to locate the executable file for the application you were trying to start when you received the StackHash error, and click Open to add it to your exceptions list.
8. Click Apply or OK to commit your changes."
But I tried this and none of the three problem files that I encountered would open... I still got the StackHash_e98d or PREMINFO.dll crash errors.
So anyway, I'm a ways past that in my project now, just continuing with more keyframes over the number of 78 in separate but identical still image clips... that allows me to successfully work with this project with as many keyframes as I need.
Thanks again,
digi

Unable to create virtual folder. Too many folders

Hi,
We are getting this error while trying to create new folder in UCM (even trying directly from UCM throws same error)
oracle.stellent.ridc.protocol.ServiceException: Unable to create virtual folder. Too many folders
Has anyone experienced this? If yes, please let us know how you resolved it.
Thanks!

You don't "store" anything in contribution folders. They are just webdav access points. I recommend zero folders personally.
If you want to upload files using webdav, then I suggest using one staging folder, where files can enter the system. When the document is workflowed and/or verified, it is moved out of the folder. It's more likely however that you'll need a few access points for various types of content as each folder enforces specific metadata.
Now I imagine you are after a way to store all the HR bits and pieces of one person together as a unit. Some people use Content Folios. Personally, I'd just use a metadata field that contains the ContentID of the person's master record. Any new content for that person just gets the master ContentID stamped on it. Just search for that ContentID to get all their stuff.
Regarding best practices, there are lots of quality blogs floating around. Stellent/Oracle don't talk about best practice because each system is used by their clients in a unique way... well, that's what they say.

Too many simultaneous persistent searches

Similar Messages

Maybe you are looking for