Tool to export and import high volume data from/to Oracle and MS Excel

We are using certain reports (developed in XLS and CSV) to extract more than 500K to 1M records in single report. There around 1000 reports generated daily. The business users review those reports and apply certain rules to identify exceptions then they apply those corrections back to the system through XL upload.
The XL reports are developed in TIBCO BW and deployed in AMX platform. The user interface is running on TIBCO GI.
Database Version: Oracle 11.2.0.3.0 (RAC - 2 node)
The inputs around following points will be of great help:
1) Recommendation to handle such higher volumes reports and mechanism to apply bulk correction back to system?
2) Suggestions for any Oracle tool or third party tool

If you were to install Oracle client software on the PC where EXCEL is installed,
then you can utilize ODBC such that Excel can connect directly to the DB & issue SQL.

Similar Messages

Export and Import of Configuration Data

Hi All,
I have created a number of custom properties, structures, groups, renderers, layout sets etc and would like to move them from Dev to Test system.
I have found the following in the help doco:
"Export and Import of Configuration Data"
http://help.sap.com/saphelp_nw04/helpdata/en/e1/029c414c79b25fe10000000a1550b0/content.htm
However I am unable to see its functionality in our portal systems (namely the Actions->Export and Actions->Import functions).
Our version of Portal is: 6.0.9.6.0
KM: 6.0.9.3.0 (NW04 SPS09 Patch3)
Therefore we should be able to see it? no?
Are there any special settings to see these buttons?
Cheers,
Vic

Thanks for your replies.
OK, so in otherwords, it is not available in SP09 and only in SP12+.
So, to "transport" this information I will have to manually reapply thes settings in the Test system!
Message was edited by: Victor Yeoh

Import data from few tables and export into the same tables on different db

I want to import data from few tables and export into the same tables on different database. But on the target database, additional columns have been added
to the same tables. how can i do the import?
Its urgent can anyone please help me do this?
Thanks.

Hello Junior DBA,
maybe try it with the "copy command".
http://download.oracle.com/docs/cd/B14117_01/server.101/b12170/apb.htm
Have a look at the section "Understanding COPY Command Syntax".
Here is an example of a COPY command that copies only two columns from the source table, and copies only those rows in which the value of DEPARTMENT_ID is 30:Regards
Stefan

Is it possible to export Azure VM(to local disk) and import that VM to another Azure subscription and use that successfully ?

I am setting up one VM in my Azure subscription.
1
Is it possible to export Azure VM(to local disk) and import that VM to another Azure subscription and use that successfully ?
2
Is it possible to move VM from one subscription to another subscription directly ?

I think Yes. If you have the copy of OS (image) and data disk VHDs then you can copy that in your new subscription. And then create VM using that image. It has nothing to do with subscription.

Error importing vendor master data from ERP

Hi experts,
currently we are trying to import vendor master data from ERP to SAP Sourcing 9.
We exported the data in an XML file by using the transaction BBP_ES_MAST_DOWNLOAD.
We already imported all the dependencies like vendor account group, purchase org, regions etc. successfully.
However, every time we are trying to import the vendor data we receive the same result:
Data Import:
Trace.txt:
Do you have any hints why this happens?
Thanks in advance and best regards,
Johannes

Hello Johannes,
This looks to come from a custom script in your system.
Go to Setup > Script Definition and check all scripts defined on class "Supplier" (starting with those on context: Import Lifecycle Event).
Search for a script that starts with "throw doc.createApplicationException(test..."
Regards,
Bogdan

Function module to derive start and end dates from fiscal year and period.

Hi,
I want to know a function module to derive start and end dates from fiscal year and period.
ie: If I have say fiscal year '2010' and period '07', then the start date of this period would be '01.10.2010'.
Thanks.
Moderator Messge: Basic Date questions are not allowed.
Edited by: kishan P on Oct 18, 2010 4:45 PM

Hi,
This is one of my exit that display the calmonth (offset -12). Usefull when I have to retrieve in a KF a complete rolling year depending one calmonth.
S_VMUCMN is my selection variable
S_TXTCMN_M12 is my text variable calmonth-12
S_TXTCMN_M0 is my text variable for selected calmonth.
WHEN 'S_TXTCMN_M12'.
    IF i_step = '2'.
      LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'S_VMUCMN'.
        CLEAR l_s_range.
        " First day of the selected month
        CONCATENATE loc_var_range-low '01' INTO l_calday.
        CALL FUNCTION 'YFRBW_FUM_CAL_DATE_IN_INTERVAL'
          EXPORTING
            date      = l_calday
            months    = 12
            signum    = '-'
          IMPORTING
            calc_date = l_calday.
        l_s_range-low = l_calday+0(6).
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Thus, in KF header you have to put the two text variable to display the complete period.
Hope it helps,

How to export data from a Oracle table to a delimited file?

I know how to load delimited file into a table, but how to export
data from a Oracle table to a delimited file?
Thanks in advance.

Try looking at this link, it's long but there's three different solutions discussed in it. If you look at Barbara Boehmer's
solution in her posts in the link below you'll see that she's addressed your concerns with spool files.
Re: utl_smtp and triggers

How to export data from a Dynpro table to Excel file?

Hi
Here I go again. I read the post <b>Looking for example to export data from a DynPro table to Excel file</b> and put the code lines into a Web Dynpro Project where we need to export a dynpro table to Excel file but exactly at line 23 it doesn't recognize <b>workBook = new HSSFWorkbook();</b>
1     //Declare this in the end between the Begin others block.
2
3     private FileOutputStream out = null;
4     private HSSFWorkbook workBook = null;
5     private HSSFSheet hsSheet = null;
6     private HSSFRow row = null;
7     private HSSFCell cell = null;
8     private HSSFCellStyle cs = null;
9     private HSSFCellStyle cs1 = null;
10     private HSSFCellStyle cs2 = null;
11     private HSSFDataFormat dataFormat = null;
12     private HSSFFont f = null;
13     private HSSFFont f1 = null;
14
15     //Code to create the Excel.
16
17     public void onActionExportToExcel(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
18     {
19     //@@begin onActionExportToExcel(ServerEvent)
20     try
21     {
22     out = new FileOutputStream("C:/mydirectory/myfiles/testexcel.xls");
23     workBook = new HSSFWorkbook();
24     hsSheet = workBook.createSheet("My Sheet");
25     cs = workBook.createCellStyle();
26     cs1 = workBook.createCellStyle();
27     cs2 = workBook.createCellStyle();
28     dataFormat = workBook.createDataFormat();
29     f = workBook.createFont();
30     f1 = workBook.createFont();
31     f.setFontHeightInPoints((short) 12);
32     // make it blue
33     f.setColor( (short)HSSFFont.COLOR_NORMAL );
34     // make it bold
35     // arial is the default font
36     f.setBoldweight(HSSFFont.BOLDWEIGHT_BOLD);
37
38     // set font 2 to 10 point type
39     f1.setFontHeightInPoints((short) 10);
40     // make it red
41     f1.setColor( (short)HSSFFont.COLOR_RED );
42     // make it bold
43     f1.setBoldweight(HSSFFont.BOLDWEIGHT_BOLD);
44     f1.setStrikeout(true);
45     cs.setFont(f);
46     cs.setDataFormat(dataFormat.getFormat("#,##0.0"));
47
48     // set a thick border
49     cs2.setBorderBottom(cs2.BORDER_THICK);
50
51     // fill w fg fill color
52     cs2.setFillPattern((short) HSSFCellStyle.SOLID_FOREGROUND);
53     cs2.setFillBackgroundColor((short)HSSFCellStyle.SOLID_FOREGROUND);
54     // set the cell format to text see HSSFDataFormat for a full list
55     cs2.setDataFormat(HSSFDataFormat.getBuiltinFormat("text"));
56     cs2.setFont(f1);
57     cs2.setLocked(true);
58     cs2.setWrapText(true);
59     row = hsSheet.createRow(0);
60     hsSheet.createFreezePane(0,1,1,1);
61     for(int i=1; i<10;i++)
62     {
63     cell = row.createCell((short)i);
64     cell.setCellValue("Excel Column "+i);
65     cell.setCellStyle(cs2);
66     }
67     workBook.write(out);
68     out.close();
69
70     //Read the file that was created.
71
72     FileInputStream fin = new FileInputStream("C:/mydirectory/myfiles/testexcel.xls");
73     byte b[] = new byte[fin.available()];
74     fin.read(b,0,b.length);
75     fin.close();
76
77     wdContext.currentContextElement().setDataContent(b);
78     }
79     catch(Exception e)
80     {
81     wdComponentAPI.getComponent().getMessageManager().reportException("Exception while reading file "+e,true);
82     }
83     //@@end
84     }
I don't know why this happen? Any information I will appreciate it.
Thanks in advance!!!
Tokio Franco Chang

After test the code lines appears this error stacktrace:
[code]
java.lang.NoClassDefFoundError: org/apache/poi/hssf/usermodel/HSSFWorkbook
     at com.sap.tc.webdynpro.progmodel.api.iwdcustomevent.ExportToExcel.onActionAct1(ExportToExcel.java:232)
     at com.sap.tc.webdynpro.progmodel.api.iwdcustomevent.wdp.InternalExportToExcel.wdInvokeEventHandler(InternalExportToExcel.java:147)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:252)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:392)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
Thanks in advance!!!
Tokio Franco Chang
[/code]

Import some data from one oracle to another...

Hi Guys,
we have 2 oracle database servers on 2 different machines with schema.
I want to import some data from a specific table from one oracle into another oracle.
what is the way to do that.
Please help in details
Imran Baig

Hi,
Thanks for the reply.
Tables are already created in both of the oralce databases only the data varies. I just have to import only few records from one oracle to another with the same user name and table already existing.
I have tried using database link. I can view records from the other oracle database but as soon as i write an insert command oracle gets held. I cant do anything.
Is there any other way?
Imran

Retrieving data from an ArrayList and presenting them in a JSP

Dear Fellow Java Developers:
I am developing a catalogue site that would give the user the option of viewing items on a JSP page. The thing is, a user may request to view a certain item of which there are several varieties, for example "shirts". There may be 20 different varieties, and the catalogue page would present the 20 different shirts on the page. However, I want to give the user the option of either viewing all the shirts on a single page, or view a certain number at a time, and view the other shirts on a second or third JSP page.
See the following link as an example:
http://www.eddiebauer.com/eb/cat_default.asp?nv=2|21472|9&tid=&c=&sc=&cm_cg=&lp=n2f
I am able to retrieve the data from the database, and present all of them on a JSP, however I am not sure how to implement the functionality so that they can be viewed a certain number at a time. So if I want to present say 12 items on a page and the database resultset brings back 30 items, I should be able to present the first 12 items on page1, the next 12 items on page2, and the remaining 6 items on page3. How would I do this? Below is my scriplet code that I use to retrieve information from the ArrayList that I retrieve from my database and present them in their entirety on a single JSP page:
<table>
<tr>
<%String product=request.getParameter("item");
ArrayList list=aBean.getCatalogueData(product);
int j=0, n=2;
for(Iterator i=list.iterator(); i.hasNext(); j++){
if(j>n){
out.print("</tr><tr>");
j=0;
Integer id=(Integer)i.next();
String name=(String)i.next();
String productURL=(String)i.next();
out.print("a bunch of html with the above variables embedded inside")
%>
</tr>
</table>
where aBean is an instace of a JavaBean that retrieves the data from the Database.
I have two ideas, because each iteration of the for loop represents one row from the database, I was thinking of introducing another int variable k that would be used to count all the iterations in the for loop, thus knowing the exact number. Once we had that value, we would then be able to determine if it was greater than or less than or equal to the maximum number of items we wanted to present on the JSP page( in this case 12). Once we had that value would then pass that value along to the next page and the for loop in each subsequent JSP page would continue from where the previous JSP page left off. The other option, would be to create a new ArrayList for each JSP page, where each JSP page would have an ArrayList that held all the items that it would present and that was it. Which approach is best? And more importantly, how would I implement it?
Just wondering.
Thanks in advance to all that reply.
Sincerely;
Fayyaz

-You said to pass two parameters in the request,
"start", and "count". The initial values for "start"
would be zero, and the inital value for "count" would
be the number of rows in the resultSet from the
database, correct?Correct.
-I am a little fuzzy about the following block of code
you gave:
//Set start and count for next page
start += count; // If less than count left in array, send the number left to next next page
count = ((start*3)+(count*3) < list.size()) ? (count) : ((list.size() - (start*3))/3)
Could you explain the above block of code a little
further please?Okay, first, I was using the ternary operators (boolean) ? val_if_true : val_if_false;
This works like an if() else ; statement, where the expression before the ? represents the condition of the if statement, the result of the expression directly after the ? is returned if the condition is true, and the expression after the : is returned if the condition is false. These two statments below, one using the ternary ? : operators, and the other an if/else, do the same thing:
count = ((start*3)+(count*3) < list.size()) ? (count) : ((list.size() - (start*3))/3);
if ((start*3)+(count*3) < list.size()) count = count;
else count = ((list.size() - (start*3))/3);Now, why all the multiplying by 3s? Because you store three values in your list for each product, 1) the product ID, 2) the product Name, and 3) the product URL. So to look at the third item, we need to be looking at the 9th,10th, and 11th values in the list.
So I want to avoid an ArrayIndexOutOfBounds error from occuring if I try to access the List by an index greater than the size of the list. Since I am working with product numbers, and not the number of items stored in the list, I need to multiply by three, both the start and count, to make sure their sum does not exceed the value stored in the list. I test this with ((start*3)+(count*3) < list.size()) ?. It could have been done like: ((start + count) * 3 < list.size()) ?.
So if this is true, the next page can begin looking through the list at the correct start position and find the number of items we want to display without overstepping the end of the list. So we can leave count the way it is.
If this is false, then we want to change count so we will only traverse the number of products that are left in the list. To do this, we subtract where the next page is going to start looking in the list (start*3) from the total size of the list, and devide that by 3, to get the number of products left (which will be less then count. To do this, I used: ((list.size() - (start*3))/3), but I could have used: ((list.size()/3) - start).
Does this explain it enough? I don't think I used the best math in the original post, and the line might be better written as:
count = ((size + count)*3 < list.size()) ? (count) : ((list.size()/3) - start);All this math would be unnecessary if you made a ProductBean that stored the three values in it.
>
- You have the following code snippet:
//Get the string to display this same JSP, but with new start and count
String nextDisplayURL = encodeRedirectURL("thispage.jsp?start=" + start + "&count=" + count + "&item=" + product);
%>
<a href="<%=nextDisplayURL%>">Next Page</a>
How would you do a previous page URL? Also, I need to
place the "previous", "next" and the different page
number values at the top of the JSP page, as in the
following url:
http://www.eddiebauer.com/eb/cat_default.asp?nv=2|21472
9&tid=&c=&sc=&cm_cg=&lp=n2f
How do I do this? I figure this might be a problem
since I am processing the code in the middle of the
page, and then I need to have these variables right at
the top. Any suggestions?One way is to make new variable names, 'nextStart', 'previousStart', 'nextCount', 'previousCount'.
Calculate these at the top, based on start and count, but leave the ints you use for start and count unchanged. You may want to store the count in the session rather than pass it along, if this is the case. Then you just worry about the start, or page number (start would be (page number - 1) * count. This would be better because the count for the last page will be less than the count on other pages, If we put the count in session we will remember that for previous pages...
I think with the details I provided in this and previous post, you should be able to write the necessary code.
>
Thanks once again for all of your help, I really do
appreciate the time and effort.
Take care.
Sincerely;
Fayyaz

Acquiring High resolution data from usb mouse movement

Is there a way of acquiring high resolution data from the movement of a usb mouse? I have a NI PCI 6221 daq card to use. I have a Pentium 4 PC with 1 Gb of RAM. I need to get the position, velocity and acceleration of the mouse.
Is there a way to do it with the above hardware.
Thanks in advance

I don't see how you could use a PCI-6221 to get high resolution mouse movement measurements. The PCI-6221 can acquire voltages at up to 250kS/s, but what voltage would you measure? It could also read in digital data at 1MHz, but you would have to be able to understand the USB communication protocol your mouse uses, and I doubt that your mouse vendor will give out that information. You might be able to take your mouse apart and hook up leads to the sensors around the trackball and do a sort of quadrature encoder application, but there's no guarantee we're dealing with TTL digital signals here (you might even be using an optical mouse!).
Your best option - and I have no idea how good this option is - is to use the driver already installed for your usb mouse. What software application are you going to use to program your application that will measure the mouse movements?
If you would consider using LabVIEW, you could set up an event structure to capture mouse movements across the front panel. Each event registered includes a timestamp from the CPU's millisecond clock as well as the coordinates of the mouse. If you stored up a buffer of previous mouse positions and times, you could infer a velocity, perhaps with the help of interpolation functions.
All of this would have somewhere on the level of millisecond timing accuracy. Were you envisioning something else?
Jarrod S.
National Instruments

Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed latest version of Tuxera NTFS for Mac.

I purchased a 3TB HDD (WD USB 3.0 $100) to replace the 2TB Seagate for a new Time Machine HDD. The 2B was full and backups were deleting older files. The 3TB was formatted NTFS and I want to "recover" the included SW before I reformatted the HDD for the iMac. I discovered that MacFuse was out of date and unsupported and my NTFS-32 was also out of date so I uninstalled both and then installed the most recent version of Tuxera NTFS for Mac. I rebooted and discovered that the FW800 port was unresponsive. Below is the EtreCheck report:
Problem description:
Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed Tuxera NTFS for Mac.
EtreCheck version: 2.0.8 (95)
Report generated October 30, 2014 7:11:17 PM EDT
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:17:34
Disk Information: ℹ️
WDC WD5000AAKS-40TMA0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
ML 10.8 (disk0s2) / [Startup]: 499.25 GB (20.92 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Hardware Monitor ƒ/HardwareMonitor.app
[loaded] com.bresink.driver.BRESINKx86Monitoring (7.0) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18615.948847) Support
[not loaded] com.parallels.kext.hypervisor (8.0 18615.948847) Support
[not loaded] com.parallels.kext.netbridge (8.0 18615.948847) Support
[not loaded] com.parallels.kext.usbconnect (8.0 18615.948847) Support
[not loaded] com.parallels.kext.vnic (8.0 18615.948847) Support
/Applications/Toast Titanium v11.1/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Applications/Toast Titanium/Toast Titanium v11.1 (1072).app
[not loaded] com.roxio.TDIXController (2.0) Support
/Library/Application Support/Symantec/AntiVirus
[loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.9.0 - SDK 10.6) Support
[loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[not loaded] com.increw.kext.speedit (0.32) Support
[loaded] com.logitech.manager.kernel.driver (4.10.0 - SDK 10.8) Support
[not loaded] com.olympus.CamBlockCommandsDevice (2.0.0) Support
[not loaded] com.olympus.CamBlockCommandsDeviceUP (2.0.0) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ndcengine (1.0f1 - SDK 10.6) Support
[loaded] com.taoeffect.ispy.kext (2.0.2 - SDK 10.2) Support
/System/Library/Extensions/OlympusDSCDriver.kext/Contents/PlugIns
[not loaded] com.olympus.CamFWSerialBusProtocolTransport (2.0.0) Support
[not loaded] com.olympus.CamUSBMassStorageClass (2.0.0) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
/Users/[redacted]/Downloads/LCC Installer.app
[not loaded] com.Logitech.Unifying.HID Driver (1.3.1 - SDK 10.8) Support
Startup Items: ℹ️
TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.canon.MFManager.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[running] com.logitech.manager.daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.symantec.uiagent.application.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[running] com.eltima.ElmediaPlayer.daemon.plist Support
[loaded] com.embraceware.awaken.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.taoeffect.ispyd.plist Support
[running] com.wdc.drivemanagerservice.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.prosofteng.DGMonitor.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.taoeffect.EspionageHelper.plist Support
User Login Items: ℹ️
Speedy Mac Application (/Applications/Speedy Mac/Speedy Mac.app)
AwakenHelper Application (/Users/[redacted]/Library/Application Support/Awaken/AwakenHelper.app)
GetBackupAgent Application (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
WDDriveUtilityHelper Application (/Users/[redacted]/Downloads/WD/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
ClustersHelper Application (/Library/PreferencePanes/Clusters.prefPane/Contents/Resources/ClustersHelper.a pp)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
SAVDiskMountNotify UNKNOWN (missing value)
ScanNotification UNKNOWN (missing value)
Launch Nikon Message Center 2 Application (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
Internet Plug-ins: ℹ️
EPPEX Plugin: Version: 10.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 9.4.6 Support
Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 Support
NPVirtools: Version: 4.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.6.8r638 Support
QuickTime Plugin: Version: 7.7.1
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.3.0 Release Support
ToontownBundleManager: Version: (null) Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
OVSHelper: Version: 1.0 Support
CoolirisWebKitPlugin: Version: (null) Support
Google Earth Web Plug-in: Version: 6.1 Support
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
User Internet Plug-ins: ℹ️
BrowserPlus_2.9.2: Version: 2.9.2 Support
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
DivX HiQ
Aimersoft Video Converter
3rd Party Preference Panes: ℹ️
BrowserPlus Support
Clusters Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Logitech Control Center Support
Logi Preference Manager Support
MenuMeters Support
Perian Support
Symantec QuickMenu Support
TechTool Protection Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
iMac TimeMachine [Local]
Total size: 2 TB
Total number of backups: 80
Oldest backup: 2011-09-18 05:21:33 +0000
Last backup: 2014-10-05 20:18:55 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 0 B X 3)
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Top Processes by CPU: ℹ️
      2% WindowServer
      0% Speedy
      0% SystemUIServer
      0% RealPlayer Downloader Agent
      0% ps
Top Processes by Memory: ℹ️
288 MB SymDaemon
150 MB Speedy
137 MB Safari
82 MB WebProcess
82 MB coreservicesd
Virtual Memory Information: ℹ️
2.17 GB Free RAM
1.46 GB Active RAM
148 MB Inactive RAM
518 MB Wired RAM
388 MB Page-ins
0 B Page-outs
I hope someone has some ideas! TIA.

Do you have another cable you can test with? Do you have access to another computer with Firewire you can test with?
FireWire Device not Working
FireWire/USB - Quick Assist

Data sync between oracle and sql server

Greetings Everyone,
Your expert views are highly appreciable regarding the following.
We at work are evaluation different solutions to achieve data synchronization between oracle and sql server data bases. Data sync i mentioned here is for live applications. We are runnign oracle EBS 11i with custom applications and intending to implement a custom software based on .NET and SQL Server. Now the whole research is to see updates and data changes whenever happens between these systems.
I googled and found Oracle Golden Gate, Microsoft SSIS, Wisdom Force from Informatica....
If you can pour in more knowledge then it's great.
Thank You.

Most of the work involved has to be done through scripts and there is no effective GUI to implement OGG.However using commands is not vey togh and they are very intutive.
These are the steps, from a high level:
1.Get the appropriate GG Software for your source and target OS.
2.Install GG on source and target systems.
3.Create Manager and extract processes on source system
4.Create Manager and replicat processes on target system
5.Start these processes.
First try to achieve uni-directional replication. Then Bi-directional is easy.I have implemented bi-directional active active replication using Oracle DBs as source and target. Refer to Oracle installation and admin guides for more details.
Here is a good article that may be handy in your case.
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
Edited by: satrap on Nov 30, 2012 8:33 AM

Transfering data from older machine and upgrading to Leopard

Like an idiot I bought two new iMacs just a week before Leopard was announced. So I am getting the $9.95 up-to-date offer on Leopard.
My question is a matter of sequence. Does it make any difference if I fire up the new machines and transfer all my data from the older (G5) iMac first, then upgrade to Leopard when it arrives? Or should I wait and do the upgrade first, then transfer everything?

Welcome to Apple Discussions!
You are probably going to get all kinds of opinions on this, and I don't know how the $9.95 upgrade works. I got my MBP about a month or so before Leopard came out because my iBook died and I needed a replacement. I decided to put very little on the MBP until I was able to install Leopard. Just as well. I tried an Archive and Install, and it was immediately apparent that there were some differences--the mailbox fonts were different and the internet access settings kept changing so I had to keep resetting them to get on line. I tried loading 36 photos from a CD and got multiple copies and some other junk. After deleting all the extras, all the mail vanished from my mailboxes along with the printers and printer drivers. No telling what I did to do that! I did get my mail back, but since everything was backed up on my external HD, I decided to just do an erase and install. Things are much better now, although it was a pain to get mail working again.
But I think if I were in your shoes, I would like to upgrade first and when you feel that everything is working properly, import your data. I started with just my address book and bookmarks, and still haven't gotten everything else imported. I decided to get all the software up to date first, which will take a while with dial up.
Hope this helps!

I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

dglenn9000 wrote:
I created a new user account just to see if it was my user Library or if there was something wrong with my system. And the new user account is doing most of the same things so I will need to do a full restore anyway.
Not necessarily. I'd suggest downloading and installing the "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

Tool to export and import high volume data from/to Oracle and MS Excel

Similar Messages

Maybe you are looking for