ToolBar buttons not rendered

Recently upgrade to 11.1.1.4. On my machine/browser the jsff page that has some toolbarbuttons at the right end gets rendered fine. But while using a different machine/Browser version (IE 7), and pointing to my server, I dont see the buttons rendered. I'm not sure whats happening...Can someone help?

Kind of hard to say, but if your page renders OK on FF it's probably a layout problem with IE7. You can try and look at the generated html code for hte page and check if the buttons are in the html code. If yes you found an incompatibility in IE.
Then you may try to alter the layout of the page to see the buttons in the IE rendered page.
Timo

Similar Messages

HELP: "Fitting" toolbar buttons not showing up in CS5

Hi All,
I can't figure out how to get this to work. The toolbar buttons in CS5 are a bit different than those that show up when I am in CS4 and I am not familiar with the changes.
I like the "fit content to frame", "fit content proportionally", etc. as toolbar buttons. I know there are keyboard shortcuts for these, which would be faster to learn... but I just don't work that way... I'm a visual person, I need to see and click on the buttons. But my CS4 buttons are gone in CS5.
How do I get the fitting toolbar buttons back when I have selected an image that I want to modify?
Thanks in advance!

NVM... I answered my own question. The toolbar buttons that I was looking at were really there, but I just couldn't see them because too much space on my toolbar was taken up by stuff I don't use frequently. Once I removed the extras that I didn't want, they appeared!

Add Content button not rendered inside Portlets on edit mode

Hi,
I have a requirement where administrators will add some external content(Add content) either from taskflow or portlet and that external content (along with taskflow output) will be shown to the users based on some logic performed inside the taskflow/portlet bean code.
This PanelCustomziable should render AddContent button inside the portlet when pressing ctrl shiftE, but its no doing so? Where as the same PanelCustomizable renders AddContent button inside the taskflow on edit page? Any settings or changes needs to be done to make it work in porlet when consumed in portal?
a)taskflow cannot be selected for this purpose, as there will be only a single instance of the taskflow across the portal and it cannot retain runtime MDS changes to a specific instance (Unless we design the ADF taskflow with MDS customization layer). By default, any runtime change in one taskflow instance will be propagated to all the other taskflow instances of the portal.
(For eg.. Admin drops this taskflow onto a page1 and adds a image(external content) using the button AddContent inside the taskflow because of PanelCustomizable and close the page. He drops the same taskflow from RC only to find that the changes he done on page1 is being retained here ..its not resuable because of no MDS per instance)
So we selected Portlet for this purpose, as it has the inbuilt personalization framework. Admin can personalize each portlet instance and drops on the the same page and diff page again. But with portlets, Add Content is not rendered.
Its not just external content, the taskflow / porltet has some logic to perform and displays some output based on the ruleId which is the input parameter.
Taskflow or jsff code
==================
<cust:panelCustomizable id="pc1">
<cust:showDetailFrame text="rules content" id="sdf1"
shortDesc="rules content">
<af:panelGroupLayout id="pg1" >
<af:outputText label="RuleId" id="ot1" clientComponent="true"/>
</af:panelGroupLayout>
</cust:showDetailFrame>
</cust:panelCustomizable>

Can you please post this question to weblogic.developer.interest.portal
newsgroup.
Thanks
"Lodewijk Spijker" <[email protected]> wrote in message
news:3f165945$[email protected]..
Hi,
i am using Workshop 8.1 (GA release july) and i have discovered a bug (ora
feature) with respect to the beta version.
i have created a simple portlet with a view mode and an edit mode. When i
place the portlet on the very first page of a one book portal, it works
perfectly. However, i have a book with three pages and placed the portleton
the second page. Now when i put the portlet in edit mode, by clicking the
edit button, i am directed to the first page of the portal and the portlet
will not show.
Inspection learned that the URL generated for the edit button, didn't
contain the _pagelabel parameter. When i added the parameter manually it
works fine.
A final remark is that the buttons in the titlebar have no icons thebrowser
can load.
hope someone can help me out,
Lodewijk

In IC_Auto business role Toolbar buttons not visible

Hi,
   In my project for IC_Auto role the buttons in the toolbar is not visible. we have not modified any thing to standard. Any notes to be updated ?
With regards,
selvam

Hi,
I am not sure if this appies here. You might check
SPRO->CRM->crm cross-application components->
Generic interaction Layer/Object Layer ->
     component-specific settings->
       define simple objects
For these objects 2 rules apply:
1. 'search object name' can only be used once.
2. 'search object name' should not have the same name as any 'object
name'.
Do you have any entries, which break these rules?
If it is related to component enhancement, note 1122248 might help.
Best Regards,
Sigrid

IR toolbar buttons not scrolling

I have a fairly wide interactive report that is getting cut off on the right-hand side in Theme 4. Not unexpected, but the browser isn't giving my any scroll bars, which kind of was a surprise. This means I've got data that can't be seen. In an attempt to counter this, I added a div tag with an overflow style to force the region to scroll. This worked as I expected nicely, but what I didn't expect was for the toolbar buttons, (Go and Actions), not to scroll.
Has anyone run into this?
I've set up a quick app. to help show what I'm seeing.
[http://apex.oracle.com/pls/apex/f?p=58111:2|http://apex.oracle.com/pls/apex/f?p=58111:2]
I don't see this same behavior on apex.oracle.com; is this an issue that was addressed in 4.1? If so, is there a work around? I'm not sure when we'll upgrade to 4.1.1
Our version:
Application Express 4.0.2.00.07
Thanks!
Joe
Edited by: JLiljedahl on Mar 20, 2012 9:32 AM
Looks like an IE issue. FF 11 is fine, IE 8 isn't. Although I don't see this issue with 4.1.1 on oracle.com in IE...

Post Author: mewdied
CA Forum: .NET
This will move where it looks for the images, but not where it looks for the javascript files that do the exporting and printing. Only way to specify where the crystalreportviewer directory is located is in CR XIr2 with fixpack 2.2 or later. In the release notes there is documentation on what you need to setup to do this.

Toolbar Button not Appearing in Plugin

The following code is not producing a button in the file toolbar in Acrobat 8 Professional, despite being called from PluginInit:
bool AddToolbarItems()
AVToolBar toolBar = AVAppGetToolBar();
AVToolButton endToolsGroupButton;
//No tool bar?
if (!toolBar) return false;
DURING
//Get the sep button
endToolsGroupButton = AVToolBarGetButtonByName(toolBar, ASAtomFromString("endToolsGroup"));
//Set up add file button
attachButton = AVToolButtonNew(ASAtomFromString("DCA:ACRAddFileButton"), GetAddFileIcon(), true, false);
AVToolButtonSetExternal(attachButton, TOOLBUTTON_EXTERNAL);
AVToolBarAddButton(toolBar, attachButton, true, endToolsGroupButton);
AVToolButtonSetExecuteProc(attachButton, ASCallbackCreateProto(AVExecuteProc, AddFile), NULL);
AVToolButtonSetComputeEnabledProc(attachButton, ASCallbackCreateProto(AVComputeEnabledProc, PluginIsEnabled), NULL);
AVToolButtonSetHelpText(attachButton, "Add File to ACR");
HANDLER
return false;
END_HANDLER
return true;
What am I missing? I can attach to Acrobat.exe and walk through the code, so I know it's executing.
Thanks.

Leonard:
Thanks for the reply.
> AVAppGetToolbar - what toolbar are you expecting here? Perhaps you want a specific toolbar - or at least one that you create yourself...
This was the issue.
The docs describe AVAppGetToolbar as:
"Retrieves a special toolbar representing the union of all toolbars in the system....If this toolbar is passed to AVToolBarAddButton(), the newly added button will actually be placed on the File menu, unless it is being positioned next to an existing button, in which case it will be placed on the same toolbar as the existing button."
Perhaps when I looked for the "endToolsGroup" button, it added it to an unexpected toolbar? Dunno.
AVAppGetToolBarByName("File") worked great.
Thanks,
Brett

Applocation toolbar button not visible

Hello All,
I have added a button to applcaiton tool bar, in a PF status. But this button is not visible on screen.
This is 35th Button
there is place in application toolbar, as we are excluding few buttons
the same PF satus is getting called, where i inserted button
The functin key is working, but the butto is not visible...
I am clueless, why its not visible. Please give me some ideas
Thank you
Amar

Hi,
It may be that the function is being disabled by authorizations. To prove this, you could do the following...
Before you run the transaction you modified, go into debug with /h.
Run your transaction code - you should start up in debug.
Use menu option Breakpoints / Breakpoint At / Statement. Input the command SET PF-STATUS.
Hit F8 to continue until the SET PF-STATUS command is found.
At this point, if the SET PF-STATUS statement ends with EXCLUDING tablename (where tablename is an internal table), then double-click on the internal table and display the entries in it. If your function code is included in this table then that's the reason why you don't see the button. You'd then need to work back to determine why your function code is included in the internal table. This assumes the function code does indeed already exist in the GUI status used in the screen.
Regards, Andy

Navigation toolbar buttons not working

The back button, forward button, refresh button, and stop button all do not work on the navigation toolbar of my firefox 3.6.9. (I've had this issue with earlier versions as well) I have tried reinstalling, but they still are not highlighted so I can use them. Please help as I do not want to have to go to another browser. Thanks!

Did you try to delete or move places.sqlite ?
Copy and Paste this code in the Code field in the "Tools > Error Console" and click the "Evaluate" button to cleanup and compress the places.sqlite database file.
<pre><nowiki>Components.utils.import("resource://gre/modules/PlacesDBUtils.jsm");PlacesDBUtils.checkAndFixDatabase();</nowiki></pre>

Buttons not rendering properly. Looks like 'sideways letter P' inserted in buttons

I noticed starting yesterday, that the 'Close' buttons and other buttons in Firefox (For Hotmail in particular when you delete messages, a window opens asking if you really want to delete the messages and the 'OK' button has this strange rendering) stopped rendering properly. Also, when you exit the Firefox browser and you get the 3 buttons in the Quit Firefox window: Save and Quit, Quit, Cancel - these buttons no longer render properly. It looks like a strange somewhat askew letter P has been inserted into the left and right ends of the buttons. No software installs outside of Adobe, Java and Microsoft updates have been applied. I have a photo to show them if it would be possible to upload it.

I do use the Noia 4 Theme Manager 1.8.0 but have done for years and it has only started rendering buttons this way yesterday. Thanks for your potential fix! I appreciate you taking the time to submit that and will look into it when I get the chance. Cheers!

"Upload" Button not rendering in firefox for multiple file upload

This is driving me nuts. The "Upload" Flash button is not appearing in one of my apps in firefox only. The even weirder thing is I have another app which it does work. I've tried copying the includes folder for the app that works over to the one that doesn't. Deleting the includes and doing a basic test dynamic form and then adding the multiple upload beahviour.
When i test it, the "upload" button simple isn't there. any one else run into this?

OK, sorry, i guess it was a firefox cache issue. I right clicked on the window for the upload and hit "reload". The "upload" flash button now appears.
man, that was driving me nuts.

Custom Page inline LOV font, buttons not rendering correctly.

Hi ,
i have created a inline LOV in my custom page and the LOV functions correctly BUT the font and the buttons are all messed up (ie displays in a wierd tiny font and the text for the 'cancel' and 'select' buttons in the LOV page appear like text with a small square next to them, though they do the right functions (ie cancel does the cancel etc).....
also, in the main page i display results in a simple table and programatically control some rows to be readonly and some enterable. Again am having presentation issue - ie the readonly rows appear much thinner than the ones where input allowed. this makes the data presentation look very wierd. i tried using CSS class, different itemstyles etc but just cant seem to get a uniform look.
has anyone faced this before ? would really appreciate some inputs.
Thanks.

Hi,
I think the issue might be due to browser you are using. Are you using chrome/mozilla ?
Also try accessing the same page from internet explorer.
--Sushant

How to get "Selected" color for custom toolbar buttons?

RH 8.0.2.208
RoboHelp HTML
WebHelp output
I'm getting flack from internal QA folks about the custom toolbar buttons not having the same "selected" color as the default buttons (Contents, Index). I've copied the background color info from the <btnselected></btnselected> section for the built-in Contents to the <btnselected></btnselected> section for a custom toolbar button, but RH is ignoring it.
Any hints?
Leon

You could try using the raw converter. Open one file and edit it (File>Open, pick the image and choose Camera Raw as the format before you click Open). Then open the next image and click the little four-lined square on the upper right side of the ACR window and choose Previous Conversion from the flyout menu.

Command links are not rendering properly in panel collection toolbar facet

Hi
I am using jdev 11.1.2.3.0
I added toolbar component to the toolbar Facet of panel collection component .
Under the tool bar I added two command link components with name create and delete,
the problem is at run time the buttons are not rendering properly,they are hiding,instead of links
this symbol(>>) is displaying.
On clicking the symbol,I am able to see the links,I used <af:spacer> after the links but not worked.
what I have to do to render the links properly in the panel collection toolbar facet

Hi Timo
This is the code and I am using 11.1.2.3.0
     <f:facet name="toolbar">
                <af:toolbar id="t1">
                        <af:commandImageLink icon="#{resource['images:create.png']}" text="Create" id="cbInsert">
                        <af:showPopupBehavior popupId="p1"/>
                    </af:commandImageLink>
          </af:toolbar>

Command links are not rendering properly in the toolbar facet of panel collection

Hi
I am using jdev 11.1.2.3.0
I added toolbar component to the toolbar Facet of panel collection component .
Under the tool bar I added two command link components with name create and delete,
the problem is at run time the buttons are not rendering properly,they are hiding,instead of links
this symbol(>>) is displaying.
On clicking the symbol,I am able to see the links,I used <af:spacer> after the links but not worked.
what I have to do to render the links properly in the panel collection toolbar facet

Hi Timo
This is the code and I am using 11.1.2.3.0
     <f:facet name="toolbar">
                <af:toolbar id="t1">
                        <af:commandImageLink icon="#{resource['images:create.png']}" text="Create" id="cbInsert">
                        <af:showPopupBehavior popupId="p1"/>
                    </af:commandImageLink>
          </af:toolbar>

So how do I REALLY get the toolbar buttons to just show icons (and not text)?

On my Bookmarks toolbar, my bookmarks "buttons" show icon AND text. I just want to show icon, not text. When I go right-click.....customize, the window "customize toolbars" opens. Down in the bottom left corner the "show" option dropdown is already set to "icons" (and only icons). But it's just not so. The toolbar buttons show icons AND text. If I cycle through that dropdown just for kicks, it doesn't change; I can choose "icons (only)" all day long, but the toolbar buttons still show text.

Either of the following Add-ons allow you to show icons only and/or to have multiple rows on the Bookmarks Toolbar. Set the options on either after installation.
*Multirow Bookmarks Toolbar Plus - https://addons.mozilla.org/en-US/firefox/addon/multirow-bookmarks-toolbarplus/
*Roomy Bookmarks Toolbar - https://addons.mozilla.org/en-US/firefox/addon/roomy-bookmarks-toolbar/
Other - Check your Plugins and update as needed.
#Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
#'''''Adobe Shockwave for Director Netscape plug-in, version 11.6.4.634''''' (this old version has security issues)
#*http://kb.mozillazine.org/Shockwave
#*Download, save, close all browsers, run the installer you downloaded - http://get.adobe.com/shockwave/thankyou/

ToolBar buttons not rendered

Similar Messages

Maybe you are looking for