Tools and spares used for machine maintenance -table and fields -reg
Hi,
for a machine while attending breakdowns we use some spares and tools
which table of SAP stores this data like
for the equippment -
this notification /order ........ which spares/ tools are used ...........cost center to which these are issued
regards,
madhu kiran
Hi,
How to explore the given link ?
where the relevant information i have asked for can be seen ?
regards,
madhu kiran
Similar Messages
-
I have one Apple ID for my MAC and iTunes account and another that is used for both my iTunes and iPad. When I purchased music from iTunes using the Mac ID, the music isn't available on my iTunes or iPad. Neither lets me change my ID so how do I fix this issue so I can play the music on all three?
Hello chlanli
You would need to use one Apple ID for purchases in order to get them across all of your devices and computer. If you want you can use one Apple ID for purchases and the other one to sync personal data. The article below will explain further.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Regards,
-Norm G. -
[tools help] what tool can be used for moving file?and table row updating?
I need some help to know which tool can help me in the following task:
#1 Moving of file
situation : After extraction of a file , the file is moved to another directory.
#2 SQL updating
Situation : which tool in mapping can be used to update existing record / perform sql
such as UPDATE SET VALUE TABLE WHERE .... or DELETE...I need some help to know which tool can help me in the following task:
#1 Moving of file
situation : After extraction of a file , the file is moved to another directory.You can move the file using oracle UTL_FILE Package Seach the net with this Key word and create procedure/ function in oracle test it in Database .Once everything is perfect then call the procedure/function form OWB
#2 SQL updating
Situation : which tool in mapping can be used to update existing record / perform sql
such as UPDATE SET VALUE TABLE WHERE .... or DELETE...Set the Load properties of the target table as Update or Delete -
Maintenance detaisl of an equipment -spares used for -reg
Hi,
For an equippment ..i create maintenance order through IW31...get a SR for the spares and close that SR by the material issue through MB1A.
Now if i want to track for a period given , for an equippment ....what and all spares are used during maintenance,
any report available in standard ? or to customize which table and fields will help
requirement is
input is equippment
out put
for that equiipment's maintenance ............which are all spares consumed ?
regards,
madhu kiranHi,
In both i am getting no objects selected
any things shall id o like order settlements etc..to get the details here
my requirement is for an equipment which and all spares are used during maintenance for a given period of time
process: equipment -
order creation ---get reservation for selected spare parts ...clsoe reservaton through MB1A
details of thsoe spares used for the maintenance of an equipment i would like to track
regards,
madhu kiran -
Performing check and potential update for status control table
Cheers Experts,
I searched in the forum, but I didn't find an answer.
I'm working on a 3.0B BW system.
After updating from PSA to an ODS, in the log I see the following line:
"Performing check and potential update for status control table" and double clicking on it, it says:
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
I have 2 questions:
1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
2) What can I do to reduce its execution time, since it lasts several minutes?
Thanks and greetings.
RobertoRoberto, did you ever find an answer to your question? We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.
-
Hi...
3....how to create table maintanence generator for a z table and how to use that for transfering a selected records to one server to another server.
thanks and regards,
k.swaminath reddyHi,
Table maintanance Generator is used to manually
input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator
<b>
Follow below steps</b>
go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
please check the link for getting information about table maintenance generator !
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Regards,
Priyanka. -
Space Allocated and Space used for Table.
Hi,
Is there any way, we can find Space Allocated and Space used for Table wise.
I know USER_TABLESPACES help use to find table space wise. But I would like to know, the space utilized by each table in the specific table space.Check this link from Tom Kyte about it.
http://asktom.oracle.com/pls/asktom/f?p=100:11:2092735390859556::::P11_QUESTION_ID:231414051079 -
RFC- Bapi - For Role Maintenance (Single and Composite)
We are in the process of developing an ASP.NET web application which will be used to raise requests for user and role creations in SAP.
We will be making use of Sonic ESB to update SAP through IWAY SAP adapter.
IWAY SAP adapter supports RFCs, Bapis & IDocs.
We are aware of RFCs that could be used for user creation, updating and deletion.
We have NOT come across any RFCs or Bapis for role maintenance
1) We would need RFCs for the following requirements:
1) To create a new role (single or composite role ).Creating a new role would include adding transactions to a role, deriving from an existing role or assigning more than one role to another role.
2) To update a role
3) To delete a role.
4) To get the details of an existing role
If there are no RFCs for the above requirement, will we need to create a custom RFC?
If we need to create a custom RFC, are there any transactions already available for the above requirements so that we could write a RFC wrapper?
2) Are there any RFCs that would give us the complete list of roles (single or composite) in an SAP system?
3) Are there any RFCs that would give us the complete list of transactions in an SAP system?
Presently for 2) & 3) , we are making use of RFC_READ_TABLE to read SAP tables to get the list of roles and transactions.
Thanks for your answersHi,
check these FM , i dont know it will work for u or not.
BAPI_USER_ACTGROUPS_ASSIGN User: Change entire activity group assignment
BAPI_USER_ACTGROUPS_DELETE User: Delete entire activity group assignment
BAPI_USER_CHANGE Change User
BAPI_USER_CLONE Create User with Template in Another System
BAPI_USER_CREATE
BAPI_USER_CREATE1 Create a User
BAPI_USER_DELETE BAPI to Delete a User
BAPI_USER_DISPLAY Display Users
BAPI_USER_EXISTENCE_CHECK Check a user exists
BAPI_USER_GETLIST Search for Users
BAPI_USER_GET_DETAIL Read User Details
BAPI_USER_INTERNET_CREATE Create a user in the Internet
BAPI_USER_LOCACTGROUPS_ASSIGN Change Activity Group Assignment for Dependent Systems from Central Sy
BAPI_USER_LOCACTGROUPS_DELETE Delete Activity Group Assignments in the Dependent Systems
BAPI_USER_LOCACTGROUPS_READ Change Activity Group Assignment for Dependent Systems from Central Sy
BAPI_USER_LOCK Lock User
BAPI_USER_LOCPROFILES_ASSIGN Change Profile Assignment for Dependent Systems from Central System
BAPI_USER_LOCPROFILES_DELETE Delete Profile Assignments for Dependent Systems
BAPI_USER_LOCPROFILES_READ Change Activity Group Assignment for Dependent Systems from Central Sy
BAPI_USER_PROFILES_ASSIGN User: Assign profiles
BAPI_USER_PROFILES_DELETE User: Delete All Profile Assignments
BAPI_USER_UNLOCK Unlock user
Reward points if useful..
Regards
Nilesh -
Which tool do you use for load testing?
Which tool do you use for load testing for J2EE application?
hi,
i use jmeter for without issues..
first make sure that the system from where you are doing load testing is in the same lan(without firewall) to that of server. Here you are testing the capacity of server and not the network bandwith.
So assuming very good network connection what is the servers performance level...
If u have to decide which tool is decent enough to load testing,
i would suggest go for jmeter. its reliable and i have used it without problems.
Here is my quick tutorial for jemeter which i made for my teams reference.
REFERENCE
For Getting Started refer to any tutorial for Jmeter
You can refer to introduction on
http://jakarta.apache.org/jmeter/usermanual/
RUNNING LOAD TEST
Extract jakarta-jmeter-2.3RC4.zip in c:
install jdk-1_5_0_12-windows-i586-p.exe
Run C:\jakarta-jmeter-2.3RC4\bin\jmeter.bat
In Test Plan add Thread Group
Right Click Thread Group -> Add->Sampler->HTTP Request
Select HTTP Request added fill details
Serverip:www.xyz.com
Port:80
Path:/xyz-webapp/index.jsp
Use KeepAlive: Checked
Retrive All Embeded images from HTML: Checked(For geting images inside html)
Right Click Thread Group -> Add->Listner->Graph Results
Click on Thread Group Fill details
No of Threads:3(This means no of simultaneous users)
Ramp Up Period:1(3 Request will be made in 1 second period)
Loop Count:5(Above process should be repeated how many times)
Save TestPlan
Run -> Clear All
Run -> Start
Click on Graph Results for Output
Try adding different listener in Thread Group
Thread Group -> Add->Listner->Summary Report
Listeners coud be added at thread group level or HTTP Request Level
RECORDING A TEST.
Add a HTTP proxy server in workbench by right clicking on it and selecting Add->Non test Element->HTTP Proxy Server.
In Test Plan Add Thread Group
In HTTP proxy server select Target Controller as Test Plan > Thread Group.
Go to Internet Explorer and go to internet settings and set proxy server as localhost and the port
which is configured in Jmeter proxy server.Save Settings.
In Jeter proxy server start by Clicking on Start button in the HTTP Proxy Server Flap.
In browser navigate the application which you want to test.
The nodes will be added in the Thread Group.
Once Navigation is done stop the proxy server and save the test plan from file menu.
LOGGING INTO APPLICATION.
When we have to login into system and then navigate the system
we need a cookie to be tracked after login. This could be achieved
simply by Add -> Config Element -> HTTP Cooie Manager.
After adding the HTTP Cooie Manager simply run the test.
LOOPING COUNTER.
When a request is made multiple parameter is sent to server.
Parameters are sent from the HTTP Request node added in the Thread Group
in "Send Parameter with the request" table.
If we run the loop count 10 times the parameters will be sent same in every request.
If you have to send parameters like user1,user2,user3,user4....
then add -> Pre processor -> Counter.
Put start as 1 and and Maximum as 10 or whatever required.
Put Referene name as iCtr or whatever.
In the "Send Parameter with the request" in value column put user${iCtr} -
What to use for System Maintenance???
There are so many apps for cleaning up your system:
Tiger Cache Cleaner
Ice Clean
Onyx
Cocktail
Maintenance
(maybe more that i haven't heard anything about...?)
can anyone give me a recommendation?
what are the advantages/disadvantages of each?
What do you use? Why?
Any feed back will be appreciated.
Thank you!
MacBook Pro Mac OS X (10.4.8) 2 GB RAM, 200 GB HDDKappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.2 is Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values. -
Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best -
I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar. They have stopped syncing...mostly.
Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine. But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar. If I reboot the computer, the iCloud data shows up.
Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
All syncing works with my iPhone.
I have signed out of iCloud on PC. I have stopped syncing and re-started. No change.
I have an .aplzod folder for iCloud. I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
Any help would be appreciated. Curious that Outlook will upload to iCloud but not receive downloads unless I reboot. However, rebooting does not download the missing Contacts.
Jim RobbinsHi Jim!
You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
Completely close and reopen the iCloud Control Panel.
If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
Turn iCloud Calendar off and back on:
Close Outlook.
Open the Windows Control Panel:
In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
Open Outlook and test to see if the issue has been resolved.
Ensure the iCloud Outlook Add-in is active within Outlook.
Outlook 2010:
Open Outlook 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Hi all,
Long time ago, I manually created a Database (APGriMMRP) and 3 Tables (dbo.Table_1_XYcoordinates, dbo.Table_2_Soil, and dbo.Table_3_Water) in my SQL Server 2012 Management Studio (SSMS2012). The dbo.Table_1_XYcoordinates has the following columns: file_id,
Pt_ID, X, Y, Z, sample_id, Boring. The dbo.Table_2_Soil has the following columns: Boring, sample_date, sample_id, Unit, Arsenic, Chromium, Lead. The dbo.Table_3_Water has the following columns: Boring, sample_date, sample_id, Unit, Benzene, Ethylbenzene,
Pyrene. The dbo.Table_1_XYcoordinates is a Parent Table. The dbo.Table_2_Soil and the dbo.Table_3_Water are 2 Child Tables. The sample_id is key link for the relationship between the Parent Table and the Child Tables.
Problem #1) How can I print out or export these 3 dbo Tables?
Problem #2) If I right-click on the dbo Table, I see "Start PowerShell" and click on it. I get the following error messages: Warning: Failed to load the 'SQLAS' extension: An exception occurred in SMO while trying to manage a service.
--> Failed to retrieve data for this request. --> Invalid class. Warning: Could not obtain SQL Server Service information. An attemp to connect to WMI on 'NAB-WK-02657306' failed with the following error: An exception occurred in SMO while trying
to manage a service. --> Failed to retrieve data for this request. --> Invalid class. .... PS SQLSERVER:\SQL\NAB-WK-02657306\SQLEXPRESS\Databases\APGriMMRP\Table_1_XYcoordinates> What causes this set of error messages? How can
I get this problem fixed in my PC that is an end user of the Windows 7 LAN System? Note: I don't have the regular version of Microsoft Visual Studio 2012 in my PC. I just have the Microsoft 2012 Shell (Integrated) program in my PC.
Problem #3: I plan to create an XML Schema Collection in the "APGriMMRP" database for the Parent Table and the Child Tables. How can I handle the relationship between the Parent Table and the Child Table in the XML Schema Collection?
Problem #4: I plan to extract some results/data from the Parent Table and the Child Table by using XQuery. What kind of JOIN (Left or Right JOIN) should I use in the XQuerying?
Please kindly help, answer my questions, and advise me how to resolve these 4 problems.
Thanks in advance,
Scott ChangIn the future, I would recommend you to post your questions one by one, and to the appropriate forum. Of your questions it is really only #3 that fits into this forum. (And that is the one I will not answer, because I have worked very little with XSD.)
1) Not sure what you mean with "print" or "export", but when you right-click a database, you can select Tasks from the context menu and in this submenu you find "Export data".
2) I don't know why you get that error, but any particular reason you want to run PowerShell?
4) If you have tables, you query them with SQL, not XQuery. XQuery is when you query XML documents, but left and right joins are SQL things. There are no joins in XQuery.
As for left/right join, notice that these two are equivalent:
SELECT ...
FROM a LEFT JOIN b ON a.col = b.col
SELECT ...
FROM b RIGHT JOIN a ON a.col = b.col
But please never use RIGHT JOIN - it gives me a headache!
There is nothing that says that you should use any of the other. In fact, if you are returning rows from parent and child, I would expect an inner join, unless you want to cater for parents without children.
Here is an example where you can study the different join types and how they behave:
CREATE TABLE apple (a int NOT NULL PRIMARY KEY,
b varchar(23) NOT NULL)
INSERT apple(a, b)
VALUES(1, 'Granny Smith'),
(2, 'Gloster'),
(4, 'Ingrid-Marie'),
(5, 'Milenga')
CREATE TABLE orange(c int NOT NULL PRIMARY KEY,
d varchar(23) NOT NULL)
INSERT orange(c, d)
VALUES(1, 'Agent'),
(3, 'Netherlands'),
(4, 'Revolution')
SELECT a, b, c, d
FROM apple
CROSS JOIN orange
SELECT a, b, c, d
FROM apple
INNER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM apple
LEFT OUTER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM apple
RIGHT OUTER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM apple
FULL OUTER JOIN orange ON apple.a = orange.c
go
DROP TABLE apple, orange
Erland Sommarskog, SQL Server MVP, [email protected] -
I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
What Malicious Software Removal Tool can I use for my Mac Book? I need do to do this for a College class.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
https://discussions.apple.com/docs/DOC-2435
Maybe you are looking for
-
How do I refresh a table with a bind variable using a return listener?
JDev 11.1.2.1.0. I am trying to refresh a table with a bind variable after a record is added. The main page has a button which, on click, calls a task flow as an inline document. This popup task flow allows the user to insert a record. It has its own
-
As the subject line states, I suddenly find that I can't send or retrieve email over either of my iPod's Mail accounts - a POP account (with my IP provider) mirroring the account on my desktop, and a GMAIL account. (I'm using the MacMini's Airport as
-
Time dependant message collecting in a bpm
I have a bpm setup to collect messages. I want to collect messages until a specific time daily (eg. 18h00 everyday) and then send them. I have used the BpmPatternCollectTime pattern but cannot specify a daily time. Does anyone have suggestions on how
-
ORA 01422 and V$SESSION & AUDSID
Hi all, We have a client sent us the below Oralce error : ORA-01422 SELECT DISTINCT SID INTO My_sid FROM V$SESSION WHERE AUDSID=USERENV('SESSIONID'); could you please help, does v$session contain many session having the same audsid ? Is this error re
-
Import Miro when location is different
Dear All I have a situation as below Some material has been received from the import vendor. The material is presently on the port. We have hired some space on the port itself which we could consider as our external warehouse wherein the material wou