Tools for Anaylsing DB request when loading a cube

Hello everyone !
I have seen in documentation a screen in BW where you can see, while a cube is loading, usefull informations about SQL statement (request code, elapsed time...).
(It is may be accessible from SM50 while prosseces are running).
Anyone has got idea about this management tools (transaction name) ?
Thanks
Best Regards
Fred

It's much like ST05 !
When I load a cube, I have for instance an update routine for the infoobjet XXX.
Is it possible to get, for the whole datapackage, the time elapsed for this particular sql statement ?
Thanks anyway,
Best Regards
Fred

Similar Messages

Firfox 4 freezes for 1-2 minutes when loading sites with twitter or other social media content like MSNBC and other news sites.

Firefox locks up for a minute or two when loading pages on popular news websites like MSNBC,COM. When this happens the bottom status typically ready something about a link to twitter.
I do not use twitter and it is likely the company firewall blocks it if it uses any non-typical port.
I had to download the old version of the browser due to this problem.

Has anyone gotten back to you on this? I am experiencing the same problem on two different systems since release 4.1.2_03 and now have tried _05 with no luck.

Dump ASSIGN_TYPE_CONFLICT when loading into Cube

Hi,
since an few weeks we have sometimes a problem when loading data from DSO to cube.
After transport a changed cube the first dataload into the cube dumps with ASSIGN_TYPE_CONFLICT.
We always activate all transformations and all DTPs which belong to the changed cube and also transport them.
When we repeat the dataload after the dump there is no problem and the data will be loaded successfully.
The dump appears on a very strange coding-place:
* FORM WRITE_DATA_CHAVL                                              *
* Kommentar: incoming data is based in characteritic values!        *
*              Transformation to Dimension Id's needs first to        *
*              translate the charateristic values into SID's          *
FORM write_data_chavl
USING
    i_r_data       TYPE REF TO data
    i_simulation   TYPE rs_bool
    i_trexaggr     TYPE rs_bool
    i_req_sid      TYPE rssid
    i_t_tabix      TYPE gt_t_tabix
    i_ncum_loadtp TYPE ncum_loadtype
    i_pkg_id       TYPE rssid
CHANGING
    c_subrc        TYPE i.
DATA:
    l_recno       LIKE sy-tabix,
    l_erridx      LIKE sy-tabix,
    l_nexterr     LIKE sy-tabix,
    l_errnumbers TYPE i,
    l_subrc1      LIKE sy-subrc,
    l_pdimid      TYPE rssid.
FIELD-SYMBOLS:
    <l_t_cubeval> TYPE g_t_cubecha,
    <l_s_cubecha> TYPE g_s_cubecha.
IF i_pkg_id <> 0.
*   bug, cube is not delta write enabled...
    cl_rsdd_cube_writer=>monitor_log(
      i_recno    = 0
      i_msgid    = 'DBMAN'
>>>      i_msgno    = '971'
      i_errtp    = ''
      i_errnm    = ''
      i_fieldnm = '' ).
    c_subrc = cl_rsdd_cube_writer=>nc_error-no_continue.
    RETURN.
ENDIF.
Does anyone else have this problem?
Or does anyone even have the solution?
I haven't found anything useful in SDN and SAP-Notes....
Christian

Hi Christian,
In that case check if this helps.....
1905680 - SP32: 'ASSIGN_TYPE_CONFLICT' in transformation during loading data using DTP
It says
SAP NetWeaver BW 7.31 (SAP NW BW 7.3 EnhP 1)
Import Support Package 10 for SAP NetWeaver BW 7.31 (SAPKW73110) into your BW system.
Regards

Error Message When Loading a Cube

Hello - I received the following error message when I attempted to load a cube:
No SID found for value '0.000' of characteristic 0CURRENCY
Is anyone familiar with this error message? Also, I tested this load in DEV before I moved the cube into QA but I did not receive the error message in DEV. Any help would be greatly appreciated, thanks.

Hi,
I had a similar error just a few days ago. I could solve it by replicating the datasources again and activating the transfer structures via rs_transtru_activate_all. After that the load went fine.
regards
Siggi

An error occurred when loading the Cube ; Analysis services 2012

Hi All
We are facing issue on our SQL Analysis services 2012 (11.0.3381.0) on windows 2008 R2.
All cubes are not getting loaded on server. When we restart services some times 2/8 cubes some times 4/8 cubes and some times all cubes get loaded. We are not sure what could be reason for such in consistency. Below are the logs
Failed to load server plug-in extension defined in assembly System. The following error(s) have been raised during the plug-in initialization. Loading of the System assembly failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException;Could
not load file or assembly 'msmdspdm, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A)
Strong name validation failed. (Exception from HRESULT: 0x8013141A). Enumeration of types or functions through reflection in managed code failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException.
OLE DB or ODBC error: Query timeout expired; HYT00.
LOGS :
(12/6/2013 7:45:12 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the Claim Industry Summary Metrics Current. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:42 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:44 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:45 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:55 AM) Message: Service stopped. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210001)
(12/6/2013 7:47:04 AM) Message: The Query thread pool now has 1 minimum threads, 40 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingShort thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingLong thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The Processing thread pool now has 1 minimum threads, 64 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x000000000000001f now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000003e0 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x0000000000007c00 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000f8000 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:11 AM) Message: The flight recorder was started. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210005)
(12/6/2013 7:47:11 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
Thanks
Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/

Hi Saurabh,
Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support

Delta Update Problem when loading to Cube

Dear all.
Scenario:
DataSources 2LIS_18_NOTIF and 2LIS_18_I0TASK are extracted to ODS Daily which is a Delta Update.Weekly once they are updated to cube which is also Delta Update.This is automated by a process chain.
DataSource 2LIS_18_NOTIF failed on 27.07.2005 which we did not notice.Datasource 2LIS_18_IOTASK is fine.I did a repeat delta for 2LIS_18_NOTIF which is successful.Data upto ODS is fine.
Now the problem is loading data from ODS to cube which is Delta Update to be loaded every week.There are some Update rules written in which <b>sy-datum</b> is used.
Proposed Solution:
Change sy-datum for every monday date and do the delta update for 7 2LIS_18_I0TASK requests and 1 2LIS_18_NOTIF request.Delete the request from Cube,to remove delta management for 2LIS_18_NOTIF request.Now load for second week with 7 2LIS_18_I0TASK requests and the same 2LIS_18_NOTIF.Do this for all weeks and finally reconstruct all the requests which are deleted from cube.
if i follow the above approach can there be any Data inconsistency?
please help me to resolve this issue.
Regards
Ravi.

Hi Ravi,
If you are going to make a code change, which it looks like you are going to do, then I would suggest the following:
- Create an InfoObject called ZMondayd. Define is a type date, and allow master data.
- Input in the date you want your update rules to use
- In the update rule, change the code to read the value from the InfoObject, not sy-datum.
- Load your data.
I would also set up a process to update the InfoObject on a weekly basis to hold the date that you want. By using this method, if for some reason or another this process fails, you do not have to make any code changes, just maintain the InfoObject with the correct date, and reload the data.
Cheers! Bill

Computer is looking for a Temp file when loading my HpPhotosmart Essential.msi

Windows Installer, Says, The feature you are trying to use is on a network resource that is unavailable.
I have uninstalled and reinstalled the printer but the Essentials program won't load even from the disk.
(AppData\Local\Temp\7zS43C7\setup\HPPhotosmartEssential.msi) How can I bypass this request and subsitute the file from the installation disk???

Hello Fish1089,
That's a really old program, but try manually extracting the file off of the disk and adding it to the directory per the instructions on this HP troubleshooting article.
http://goo.gl/PTW2D
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Built app with Flash Builder 4.6 and compiled for iOS, now error when loading to appstore

I built a fairly simple app using Flash Builder 4.6 and have successfully deployed it to the Android Market (after testing on my own Android device). I have also taken that same app and compiled it for iOS and tested it on my own iPad.
I have then done the release build with the "Final Release for App Store Distribution" option in the release build wizard. I have all the correct provisioning certificates in place and compiled the application to a .ipa file.
At this point, using a MAC, I have run the Application Loader utility to upload my application to the itunesConnect portal to get it in the appstore. I've already gone through the steps of entering the metadata, price scheme, and screenshots in the itunes connect portal, and just need to upload it for review.
When I upload the .ipa file into the application loader, it gives me the following error:
"iPhone/iPod Touch: application executable contains unsupported architecture(s): arm"
Anyone have any idea what this means and how I can fix it? Any help is greatly appreciated!
Thanks in advance!

Solved it. Just added the following in the <InfoAdditions> tag for iPhone in my app descriptor XML file:
<key>UIRequiredDeviceCapabilities</key>
<array>
<string>wifi</string>
<string>armv6</string>
<string>armv7</string>
</array>

How to delete init request when load is taking place from ods to Cube

Dear All,
I have initiated the init load from ODS to Cube, but the init request was not successfull... Now on clicking the init infopkg i get the short dump error....
I am trying to acess this infopkg so that i can delete the old init and reschedule it again...
Now in order to avoid this error i need to delete the init request somehow..... Since data load is happening in BW system only there is no way to go to delta queue and delete the init...
How can i delete the init request in this case or how do i avoid this dumup error???
Thanks & Regards,
Anup

From se11, go to the table, see the content... from this window mark the check box for relevant entries in the first column and click on Display button (F7)
enter "/h" in the command prompt and press enter
Click the top most green button to execute.
From the debugging screen, double click on variable "CODE" change the value to "DELE" (from "SHOW") and save (by pressing enter in bi7 and by clicking pencil icon in bw 3.x ).
Press F8
In the result screen you will find the delete entry in the application bar
Delete one by one after ensuring the record content.
Better you can ask any abaper to delete the table entries in the debug mode coz its a production server..else you can call me 9500066350(I prefer you to go along with abaper if you have no option dont wait for calling).

I get an error message that reads "error parsing request" when loading travelocity pages. any ideas what causes this??

since upgrading to 4.0.1 the travelocity website has given the error message... error parsing request ...and can proceed no further. have reinstalled 4.0.1 and travelocity bookmark with no success.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

Firefox freezes for around 10 seconds when loading a video on YouTube

So everytime I'm loading a video on YouTube, it takes a very long time to load (10-15 seconds) and while the video is loading Firefox becomes completely unresponsive. I can't do anything until the video is loaded, and when it takes such a long it becomes annoying.
I have the newest versions of both Firefox and Flash Player.

Does this happen with other browsers as well? If no, maybe an extension is interfering. Here is how you can disable them to test that: https://support.mozilla.org/en-US/kb/Uninstalling%20add-ons#w_how-to-disable-extensions0-personassf-and-plugins

How to only update existing records when loading master data ?

Hello experts, I need your lights one more time.
Here is my need :
I have created an infoobject (IO) which is a very simple version of 0material, let's call it Znewmat --> Znewmat has material type and trademark as attributes, those two fields are available in 2 different datasources :
- 0MATERIAL_ATTR for material type (field MTART)
- 0MAT_SALES_ATTR for trademark (field MVGR2)
When loading my new IO from 0MATERIAL_ATTR I use a filter (at DTP level) to get only a few material types (I get something like 1000 records),
here is my issue : when I load from 0MAT_SALES_ATTR the field "material type" is not available to keep the same filter as for 0MATERIAL_ATTR and existing records are updated with the trademark, but I also get 5000 records I don't need, and my master data is "polluated" with useless lines.
*and my question : is there a way while performing the second loading to ONLY UPDATE EXISTING RECORDS AND NOT ADD ANY
NEW RECORDS ? (i didn't find anything in main options of my DTP)*
(I'd like to avoid the solution to update the 0MAT_SALES_ATTR datasource to add the missing field)
Thanks in advance for any help, points will be distributed.
Guillaume P.
Still no idea ?

in the start routine of transformation from 0MAT_SALES_ATTR to znewmat do the following:
select materials from /BIC/PZNEWMAT into i_mat
for all entries in source_package where material eq source_package-material.
loop at source_package.
p_ind = sy-tabix.
read table i_mat with key material = source_package-material.
if sy-subrc ne 0.
delete i_mat index p_ind.
endif.
this way you'll only update records that have previously been loaded by 0MATERIAL_ATTR DS
loading sequence:
first load ZNEWMAT from 0MATERIAL_ATTR. then activate ZNEWMAT. then load 0MAT_SALES_ATTR to ZNEWMAT.
M.

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

I have an existing disk of elements 3 which I loaded onto my Mac desktop. When loading onto my Mac book, I receive a "could not complete your request because of missing or invalid personalization information". Why?

I have loaded elements 3, from disk, on my mac desktop, when loading onto my macbook i get a message "could not complete your request because of missing or invalid personalization information". Why?

Thank you for your fast reply!
Sorry, I am not savvy enough to know what a serial is! Guess that means stealing it. No, that is not me.
Hmm...
I thought sure it was free with the computer, along with a whole package of other stuff. It was a sale/special. Everything else still works, except the Photoshop. I bought the Mac new at the Mac store in Marin County...
Maybe it came with the printer I bought too...? Who knows now.
The computer is several years old (copyright 1983) and I had money then! LOL! It's the economy, my dear!
Do not understand 'software'... I just use the computer. I told you I am a technophobe!
You must be young: I am very old, and did not grow up with computers.
But now from your reply, I think it must have been a free sample, or whatever... or I am confused!
I have IPhoto... that must be what came free with the Mac. But it doesn't work either. I get a message: need to upgrade, but then it says it is not responding...
Anyway, thanks again!
P.S. As I said, I had everything stolen, and do not have any registration info.
But I appreciate your reply.

How to monitor Http Request and Response when load testing is going on

Hi,
can any one please let me know how to monitor http request sent and response received for each virtual ID when a load test is going on ?
Thanks,

You used to be able to see what the VUs "see" using the "VU Monitor" (it would only do a simple rendering of the HTML but it served it's purpose). However this was replaced (in v12 I think?) by the "VU Log". While this offers simlilar functionality, I have had problems getting to see the same level of detail. You may need to use the "debug" modes. Also check the "Content" tab within the VU Logs (it is the closest equivalent to the HTML you would see in the responses in the old VU Monitor).

Tools for Anaylsing DB request when loading a cube

Similar Messages

Maybe you are looking for