Topics with Two Columns, and ?s about Margins

I've been searching all over and can't quite get the answers I need. I have a robohelp project which will solely be for written documentation. Some of the topics within this project I would like two have two columns, the left column will just have headings and the right side will have content. I did accomplish this by making a table, however I can't remove the borders. I also tried another way by using this, which works great but when I made printed documentation it didn't make it look like I have on my screen (printed the headings all together then the content on later pages).
#container2 { clear: left; float: left; width: 100%; overflow: hidden; } #container1 { float: left; width: 100%; position: relative; right: 50%; } #col1 { float: left; width: 50%; position: relative; overflow: hidden; } #col2 { float: left; width: 50%; position: relative; overflow: hidden; }
So I guess I have a few questions to try and make this project go smoothly. Since I will only be using this project for written documentation, what would be the best way to make sure that each topic I am working on will print the way I want it to (margins, etc.)? Is there a good way to deal with my two column issue? Would making a style that indents the text be a good solution?

You may also want to check out CSS columns. That will allow you to work without using tables and let the browser to take care of the rest. See: http://www.w3schools.com/css/css3_multiple_columns.asp
Kind regards,
Willam

Similar Messages

I want to compare two columns and replace any equal values with the value in a specific cell

I want to compare the numbers in two columns and replace all matching numbers in the second columns with the corresponding value from a cell in the same row as the matching number.

Me too.
Barry

How to create a form with two column headings

I have a business request to create a data form to handle multi year data by month. This will require creating a form with two column headings - with the first row be Year and second row be month, and data entry will begin in the third row and down.
I can do multiple row headings in the layout design, but somehow can not get it to work for multiple column headings.
Thanks in advance

If you're in the "Layout" tab, simply pull the "Years" dimension and the "Period" dimension into the Column section. Planning can be a little picky about where you "drop" the dimension as you're dragging and dropping it. Drop it in the cell directly under the letter name of the column. Other than that, there's not much to it.
Hopefully this helped,
- Jake

Using windows vista with two users and I can only open books with adobe digital editions on one account?

using windows vista with two users and I can only open books with adobe digital edition

You must authorize the second computer with the same Adobe ID.
There are sometimes issues with this registration: if you have them ....
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.

How to define form within a table with two columns?

Hallo,
i want to design a form with two columns side by side.
My way is to define a table within the form:
<af:panelForm>
<afh:tableLayout width="100%">
<afh:rowLayout halign="left">
<af:inputText value="#{bindings.StsNr.inputValue}"
label="#{bindings.StsNr.label}"
required="#{bindings.StsNr.mandatory}"
columns="#{bindings.StsNr.displayWidth}"
readOnly="true">
<af:validator binding="#{bindings.StsNr.validator}"/>
<f:convertNumber groupingUsed="false"
pattern="#{bindings.StsNr.format}"/>
</af:inputText>
<af:selectOneChoice value="#{bindings.StammsaetzeStsEmpfangsart.inputValue}"
label="#{bindings.StammsaetzeStsEmpfangsart.label}"
tip="Brief, Fax, Mail">
<f:selectItems value="#{bindings.StammsaetzeStsEmpfangsart.items}"/>
</af:selectOneChoice>
</afh:rowLayout>
</afh:tableLayout>
</af:panelForm>
Is there a better way to do it?

Hi reiasmus ,
Try <af:panelForm row="X">, that specifies the number of fields by columns. If you have ten fields and you fix row="5", you will obtain two columns with 5 rows on each.
Regards,
Tif

Unique row based on two columns and single column

Dear Members,
I have a table which contains duplicate rows, for which a query should be able to fetch the unique row from the table. Here the unique is not based on one column, but it should be on two columns and also check for uniqueness on one column.
create table addr ( firstname varchar2(10), lastname varchar2(10), area varchar2(3));
insert into addr values('bob', 'james', '1');
insert into addr values('bob', 'james', '1');
insert into addr values('harry', 'bert', '1');
insert into addr values('jimmy', 'bert', '1');
insert into addr values('sam', 'mac', '1');
insert into addr values('sam', 'knight', '1');
insert into addr values('tom', 'sand', '1');
insert into addr values('cat', 'mud', '1');
The output of query should contain 3 rows.
bob - james
harry - bert or jimmy - bert [ either one of them, but not both ]
sam - mac or sam - knight [ either one of them, but not both ]
tom - sand
cat - mud
SELECT firstname, lastname as total from addr WHERE area = '1' GROUP by firstname,lastname; This does not take of single column duplication..
Any suggestions..

SQL> with t_data
as
select 'bob' as firstname, 'james' as lastname, '1' as area from dual union all
select 'bob', 'james', '1' from dual union all
select 'harry', 'bert', '1' from dual union all
select 'jimmy', 'bert', '1' from dual union all
select 'sam', 'mac', '1' from dual union all
select 'sam', 'knight', '1' from dual union all
select 'tom', 'sand', '1' from dual union all
select 'cat', 'mud', '1' from dual
SELECT
        firstname,
        lastname,
        area
FROM
                SELECT
                        t.*,
                        row_number() over(partition BY firstname order by 1) rn,
                        row_number() over(partition BY lastname order by 1) rn1
                FROM
                        t_data t
WHERE
        rn     = 1
AND rn1 =1 ;
FIRSTNAME       LASTNAME        AREA
bob             james           1
cat             mud             1
jimmy           bert            1
sam             knight          1
tom             sand            1
SQL>

Report module: LOV with two columns

I would like to create a LOV with two columns in a designer generated report module.
scott@ntw>select deptno, loc
2 from dept;
    DEPTNO LOC
        10 NEW YORK
        20 DALLAS
        30 CHICAGO
        40 BOSTON
        50 LAS VEGASIs it possible to create the lov of the report module with an indivdual select statement?
Does anyobody have an idea?

Hi,
There are probably a number of ways that you can handle this, but the underlying principle for all of these would be that you need to have 2 reports. The first report would contain the first ten records and the second report would contain the next ten.
The way to do that would be to get the ROW_NUMBER() value for each line and, in the query defintion for each report, you would have a WHERE clause that restricted the results based on this value. The best way to do this would be to create a view and base the reports on this view. The view definition would include:
ROW_NUMBER() OVER (ORDER BY xxxx) AS ROW_NUMBER
where xxxx is the same order definition as the main ORDER BY clause. Each row will then get a ROW_NUMBER value that matches it's position in the query resultset.
Your first report would then have a WHERE clause of:
WHERE ROW_NUMBER < 11
the second report would have:
WHERE ROW_NUMBER BETWEEN 11 AND 20
The final step would be styling/positioning the reports. The first would probably be in Column 1 in the region and the second in Column 2. You would almost certainly have to adjust the styling and/or positioning using a style attribute in the region/report definitions.
Regards
Andy

On holidays we took pictures with two cameras and an iPad. I put everithing on my PC. Rearranged them by date, time and or subject putting a number in front of the picture name. I synchronised with my iPad and my pictures show in misselaneous order. Help

We took pictures during oue holidays with two cameras and an iPad. I put all the pictures on my PC and reorganized them by date, time and/or subject, By putting a number in front of the picture name. Then I synced with my iPad. All the pictures show in a misselaneous order. What went or did I wrong?

You did nothing wrong, but the photo app puts stuff in chronological order.
You can look for another app. Afraid I don't have one to suggest, but I do understand that other apps will sort photos differently.

I have recently installed Mavericks and since then I have been unable to shut down or log out of my mac. I work with two screens and now I seem to have programmes at the top of both screens which I didn't before. any advice?

I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?

Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you...

Dynamic Table with two columns

Hi!
i have to create a Dynamic Table with two columns having 5-5 links each with some text...... three links r based on certain conditions....they r visible only if condition is true...
if the links r not visible in this case another links take it's place & fill the cell.
links/text is coming from database.
i am using Struts with JSP IDE netbeans
Please help me
BuntyIndia

i wanna do something like this
<div class="box_d box_margin_right">
          <ul class="anchor-bullet">
          <c:forEach items="${data.faqList}" var="item" varStatus="status"
                    begin="0" end="${data.faqListSize/2-1}">
                    <li>${item}</li>
               </c:forEach>
          </ul>
          </div>
          <div class="box_d">
          <ul class="anchor-bullet">
          <c:forEach items="${data.faqList}" var="item" varStatus="status"
                    begin="${data.faqListSize/2}" end="${data.faqListSize}">
                    <li>${item}</li>
               </c:forEach>
          </ul>
          </div>
wanna divide table in two columns....if one link got off due to condition other one take it's position...
I have created a textorderedlist
Bunty

Pie chart with two measures and date dimension navigation not working

Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
V

Hi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

Dynamic gallery with 3 columns and 5 rows with paging

guyz, i am new to spry and i need your help. i want to create
a dynamic gallery with data source as xml. i want to create a
gallery with 3 columns and 5 rows.Basically a wallpaper page where
there would be 15 wallpapers in a page with a link of downloading
wallpapers with resolution 800x600,1024x768 and 1280x1024.
for example if there are 63 wallpapers for a section , then
there would be 5 pages with 5th page having only 3 wallpapers.
everytime a wallpaper is added to xml, it automatically adds
it up in html...
plz help....i really want to create this asap and i cant find
any help...

thanks a ton for your response.... Meanwhile i figured out
the solution myself using photogallery tutorial where div fixes the
width and the next repeated element get shifted to another
line.....
now i am struck with another problem.
i need to give substring to a particular data on xml.
for example i have the following xml
<movies>
<data>
Important Note: These online forums are for user-to-user
discussions of Adobe products, and are not an official customer
support channel for Adobe. If you require direct assistance, or
prefer to contact Adobe support staff directly, please contact
Adobe support.
</data>
</movies>
i want to display only first 50 characters of data tag.....
whats the code/syntax to do so.....

Populating a table with two columns using a custom bean

hello,
Can someone provide me or give me a link to an example of populating a table (with two columns) with a custom bean?
thank you
fwu

1)create a java class
2)have a list as a class variable
3) populate the list in the constructor..
4) map the values in the af:table
//Employee pojo
public class Employee {
    public Employee() {
        super();
    private String empName;
    private String empManager;
    private String job;
    public void setEmpName(String empName) {
        this.empName = empName;
    public String getEmpName() {
        return empName;
    public void setEmpManager(String empManager) {
        this.empManager = empManager;
    public String getEmpManager() {
        return empManager;
    public void setJob(String job) {
        this.job = job;
    public String getJob() {
        return job;
//maanged bean
public class Bean {
private List<Employee> employee;
    public Bean() {
        super();
        employee = new ArrayList<Employee>();
      Employee e1 = new Employee();
      e1.setEmpName("xxxxx");
      e1.setEmpManager("xxxxxxxx");
      e1.setJob("xxxxxxx");
      Employee e2 = new Employee();
      e2.setEmpName("yyyyyyy");
      e2.setEmpManager("yyyyyyy");
      e2.setJob("yyyyyyt");
      Employee e3 = new Employee();
      e3.setEmpName("zzzzzz");
      e3.setEmpManager("zzzzzzz");
      e3.setJob("zzzzzzzz");
      employee.add(e1);
      employee.add(e2);
      employee.add(e3);
      employee.add(e4);
    public void setEmployee(List<Employee> employee) {
        this.employee = employee;
    public List<Employee> getEmployee() {
        return employee;
    }in the table map like
<af:table value="#{Bean.employee}" var="row" rowBandingInterval="0"
                    id="t1">
<af:column headerText="Employee Name" id="c1">
              <af:inputText value="#{row.empName}" id="it5"/>
            </af:column>
            <af:column headerText="Employee Manager" id="c2">
              <af:inputText value="#{row.empManager}" id="it2"/>
            </af:column>
</af:table>

I use "element 12" and want like in the old PS version due Automating and Contact II upload multiple filesand print them with any columns and rows on the same page . How does it work?

I use "element 12" and want like in the old PS version due Automating and Contact II upload multiple filesand print them with any columns and rows on the same page . How does it work?

Can you supply a link?

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

Topics with Two Columns, and ?s about Margins

Similar Messages

Maybe you are looking for