Total column in print layout
Hi Dear;
i created a formula field in the end of report area that show the total of ca olumn in the repetetive area 0.
if there is data in the repetetive area the field show the correct answer, but if there is no data in the repetetive area i have the following error:
"Printing error: missing field (rpt -6717) (field:tp) [message 200-38]
anybody can help me please?
thank you dear;
Hi Dany Bittar,
I have tried u r problem. and i get it. I did as u done and i wrote the formula as ColSum("Field") for the formula feild.
Let me know is it ok or not?
Thanks,
Suresh Yerra.
Similar Messages
-
How to Add a characterstics into a column of print layout of Reporrting Age
Hi all,
I have created a query and added Sales Grp (characterstic) in ROW, and Division(characterstics) in Column also i have added one more field Amount (keyfigure) in Column.
Now I need to create a Reporting Agent(Print). When i create this Reporting Agent, in Print layout only the Keyfigure amount is coming in column the characterstics Division is coming under Row not under Column.
Can any one tell why it is not coming under Column, as i added this in the query in Column. i need it in the Column wise so what i have to do to achieve that?.
Kindly help me..
Thanks and Regards,
Muruganand.KHello
Pls see this and check whether these steps are followed
http://help.sap.com/saphelp_nw04s/helpdata/en/67/576f39ff1ee32ce10000000a114084/content.htm
Thanks
Chandran -
Calculations on Total column' fields(bps layout: dynamic calmonth)
hi friends,
in bps, output layout, based on dynamic calmonth i showing number of months. I want to system to calulate total(all calmonths) sum for a particular field.
Lead column data columns
Expenses apr2009 may 2009 june 2009.....mar2010 Total
Office 20 10 20 100
Usually for caculating total in layout builder 2nd screen, we chose tickmark(total) and then write c(1): c(1) like that or simply c(1) which calculates all calmonth values.
My situation is like this, user only enter number of year(s), in terms of range. I populate calmonth field using user-exit based on year range. Next using calmonth field in layout builder as dynamic field. Now user wants TOTAL of individual years along with calmonths. How can i put this condition in layout builder?
eg:
apr2009 may 2009......mar2010 Total(09-10) apr2010 may 2010 ...mar2011 Total(10-11).apr2011 ..Total(11-12).
Expenses 10 20 30..............
Next question, Can i do arthemetic calculation on total fields?
eg:
Lead column apr09 may09 ....mar10 total
A 10 20 100
B 20 30 200
c 10 5 ????(this value i want to calulate by above totals eg: (200/100)* 85.
Can it possible to get that?
thanks,
kumarIt is not possible to hide or change the column width during design time if the layout is ALV.
However if the layout is used in WIB (web interface builder), I believe the column widths can be modified at run time. This would need additional coding.
Regards -
Sum Total in Query Print Layout
Hi, all
I have a report which is created by a query, How can I insert a variable to show the Total Sum in footer.
Thanks
kimmyHai!
see this thread.
Sub totals in PLD
regards,
Thanga Raj.K -
Query Print Layout column sum in report footer
Hi Experts,
I am utilizing a query and created the layout via Query Print Layout. I am using sort and group functions which filters my column sums for a certain field conditions. My problem is that when I want to make a total column sum for all the repetitive footers' column sum, the system shows a message that only repetitive areas can be average/ sum.
Is this the standard behaviour of the system? Or is this a limitation if we are using the print layout via Query print layout. Any workaround to get the final total for all pages column sum?
Please advise.
Thanks,
Donhello
Don
what u want actually i dint understood as i now but u need colsum of ur repetitive fields or repetitive footer fields
I).if u want repetitive footer all columns sum take the contact of those fields ex:(concat(F_a+F_B -
)) so u can get ur total for repetitive footer fields
II).if u want repetitive area lines colsum for every field u take as colsum with respect to the unique id of repetitive area fields
regards
Jenny -
Ask Print Layout Designer for customize report
Dear all
I am newbie in SAP, and i must create report with PLD like :
PAYMENT TYPE AMOUNT
By CASH
Cash 1000
Cash 2000
Cash 3000
Cash 4000
Total Cash 10000
By CREDIT
Credit 10000
Credit 15000
Credit 17500
Total Credit 42500
By TRANSFER
Transfer 20000
Transfer 25000
Total Transfer 45000
Total Payment 97500
From database example:
PAYMENT TYPE AMOUNT
Cash 1000
Cash 2000
Credit 10000
Cash 3000
Cash 4000
Credit 15000
Transfer 20000
Credit 17500
Transfer 25000
Right Now,I just can create report like this :
PAYMENT TYPE AMOUNT
Cash 1000
Cash 2000
Cash 3000
Cash 4000
Credit 10000
Credit 15000
Credit 17500
Transfer 20000
Transfer 25000
Total Payment 97500
Please help me.. because i very need it.
Thankyou so much for your help
Regards,
Dony
Edited by: dony donse on Dec 18, 2007 4:29 AM
Edited by: dony donse on Dec 18, 2007 4:38 AMFinnaly...
someone send me PLD manual
And my problem solved
==============
Procedure
After defining the sort, perform the following steps
1. From the menu bar choose Print Layout Designer → Group.
2. Select a group number.
3. Select 1 for a sub-sort or sub-total for the primary sort, select 2 for the secondary sort and so on.
Each group is linked to its relevant row number in the Sort window described above. Thus, every field created in a certain group relates only to its group's corresponding row in the Sort window.
The Repetitive Area Header titles are now hidden as well as any field created in the Repetitive Area Footer. The reason is that these two areas are linked to groups. Each one of the groups has two areas of its own.
4. To define the sub-sort, do the following:
a. In the Repetitive Area Header assign a title for the required sort.
b. Create a new Formula field
c. Choose the Formula Editor button and select the operand SortValue() in the Operation field.
This action will print the Items table divided into separate titles each time the Item number changes.
5. To define sub-totals do the following:
a. In the Repetitive Area Footer create a Formula field.
b. Choose the Formula Editor pushbutton and select the operand ColSum(UniqueID as String) in the Operation field (for the Quantity field from the rows in the Sales Quotation).
The field within the brackets defines the column for which a total will be calculated. You can also calculate totals for the Price and Total columns. -
How to use Group in Query Print Layout
Hi All,
I have prepared a query for fetching all purchase details along with tax code, now I have ordered it on tax code and prepared a query Print Layout,
Now within this Query Print Lay Out I want to group the tax code and want to add total of some columns at end of every tax code.
Request to guide how to achieve this.
Thanking you in advance,
Samir GandhiWe need to use Sort and Group in combination.
Select the repeatative area and in PLD menu select Sort, then select the column to be sort.
then in Header / Footer of that respective repeatative area select the fields and put in the group no. in the General. -
Dunning Report Print Layout Issue
Hi
I have a problem with the Dunning Report Print layout (Dunning All (system)). In the wizard I select all the Invoices (Which are over due and current) for the BP and sent to printer.
In the print out all the due dates are mixed with the acctual Due dates.
Acctuall Invoices
Doc No. DOC Due Level
======================================
10000 05.11.07 2
10001 25.02.08 1
10002 03.03.08 1
10003 03.04.08 0
Print out
Doc No. DOC Due Level
======================================
10000 05.11.07 2
10001 03.03.08 1
10002 03.04.08 0
10003 25.02.08 1
How can I fix this. This is coming from the System template and we havent change anything.
Could you please help me.
Thanks
SanjayaHi
I solved the problem. But the issue was when i ran the dunning wizard the layouts messed up. For example if I had a dunning letter with 3 lines (overdue documents). The last line would copy itself 4-6 times (it would show the last document 4-6times so the total lines in the dunning letter would be 7-9 lines). But I solve the issue. Somehow the attention person (which I got from the contact persons (ocrp) and not from the document contact person (oinv) ) did the issue. When i switch it to the oinv the issue was gone.
kind regards
Søren
Edited by: Bundgaard Søren Hollænder on Jan 26, 2009 9:56 AM -
How too set query print layout parameters?
Hello,
simple task:
1. Open "Query Print Layout...": SBO_Application.ActivateMenuItem("4868")
2. Handle new reports form: SBO_Application.Forms.ActiveForm (I know, the better solution should be get form with proper TypeEx and highest TypeCount, but now it doesn't matter)
3. Select row with required report: m.Columns.Item(0).Cells.Item(row).Click(BoCellClickType.ct_Regular, 0)
4. Run printing: SBO_Application.ActivateMenuItem("519")
5. Handle new parameters form: ???
How can I get newly created form containing report parameters (TypeEx "4000")? I wanna set proper parameters and click "OK" to show printed report. Doesn't work handling:
- FORM_LOAD in ItemEvent
- MenuEvent for "519" (is only BeforeAction
- PrintEvent (executed after accepting parameters)
- ReportDataEvent (passed FormUID belongs to reports list, not parameters)
In each event I've listed all forms and there is no form titled "Query - Selection Criteria" with expected TypeEx.
Is there any way to achive this?when you activate print preview of printing on selected User Query Layout, you can cacth the ET_FORM_LOAD event of formTypeEx =4000
It is working. Please note if you do not have this event, you may check your filters (?)
Then you can populate your values. Based on my experience the click ok button is not working.
Tip: Search the forum in year 2009 i have posted there sample codes
Regards
J -
Default Query Print Layout problem
Hello:
I have a query below SELECT T0.[ItemCode], T0.[Dscription], sum(T0.[Quantity]) as 'Quantity' FROM INV1 T0 WHERE month(T0.[DocDate]) =month([%0]) AND year(T0.[DocDate]) = year([%0]) and T0.[ItemCode] IS NOT NULL GROUP BY T0.[ItemCode], T0.[Dscription] ORDER By T0.[ItemCode].
Which basically output monthly inventory invoiced qty. It works fine. However when I try ti link to the default system print layout and try to print. The column 'quantity' become very small and cut off most of the number. How do I make it bigger? I have been trying to modify it for quiet a while now. Nothing seems to work. I think it's length is preset base on the column lenth in the table! If that's the case how do I make it wider?
Also the default layout for user query are pretty weired. I think it's dynamically allocating spaces depends on number of column. But what happens when you do functions such as sum, avg..etc. There is no present length. So they just disregard it?
Any help will be appreciated.. Thank You
Sincerely Yours
Bo PengHi Bo,
I am asuming that u are not yet familiar with how to work with PLD (Print Layout Designer). I would suggest that u see some tutorials from the following link and then try to change that default layout according to ur own requirements
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/51c19891-0901-0010-6eb1-e71abf09298a
Reagrds
Rizwan Hafeez
Team Lead
SAP Addon Development Section
Abacus Consulting - Pakistan -
Query Print Layout - Incoming Payment
Hi All,
I have done the query print layout for incoming payment. but it cannot show the correct A/R invoice: document number. When I only make the payment for 1 invoice it seems to be correct, but when I choose 2 invoices to be paid, then the A/R invoice: document number for the second row is wrong ( if follows the first row).
Below is the query:
SELECT T0.DocNum, T0.DocDate, T0.DocCur, T0.DocTotal,
T0.DocTotalFC, T1.DocNum, T1.CardCode, T1.CardName,
T1.DocDate, T1.Comments,T1.TrsfrRef as 'Cheque No',
T2.BankCode' 'T2.AcctNum as 'Bank Code' , T0.Address , T3.Phone1 , T3.CntctPrsn , T0.PaidToDate, T0.PaidFc , T4.AppliedSys , T4.AppliedFc
FROM [dbo].[OINV] T0 INNER JOIN ORCT T1
ON T0.ReceiptNum = T1.DocEntry LEFT JOIN RCT1 T2
ON T1.DocNum = T2.DocNum LEFT JOIN RCT2 T4
ON T4.DocNum = T2.DocNum LEFT JOIN OCRD T3
ON T1.CardCode = T3.CardCode
WHERE T1.DocNum = [%0]
ORDER BY T1.DocNum
the fields that i want to display in repetitive area are: A/R invoice: Document date , A/R invoice: document number, Amount that they have paid ( partial payment / full payment) i used this database: Incoming payment - a/r invoice: paid, outstanding amount i used formula ( total document - paid to date), and document currency
Thank you! hope you can help.
PaulinePauline,
I've tested your query in B1 2007A SP00 PL30 and works fine. I even created PLD for the query and I can see 2 invoice paid by one incoming payment.
Rgds, -
Print Layout : Amount in Words
Hai To All,
I customize print layout of A/P Invoice on that i have some problem:
1) there iam calculating total amount.At the bottom of my page that amount should display in words.How to do that???
2) In between repetitive Area and End of Report there is no border while taking print its not looking good.
Anyone have idea about this????
Regards,
AnithaHi Ani,
For 1st question:
1. select the that field. goto Properties
2. In General Tab u can find Link to Textbox
3. In that textbox select the field-id of the Total Amount
4. Now goto Format tab, select the Amount in words check box
This is the way u can print Amount in words.
For 2nd Question:
1. select the repetitive area in Field Index window
2. Now goto Properties Window, select the Border Tab
3. there, in low textbox, put 1.
Thanks,
Suresh Yerra -
hi friends,
using print layout design i am getting reports for a purchased item with all types of taxes included.
i want to display the total cost of same purchased items but more than one and each purchased items having different taxes included with it.
Example:
product1:
cost price:Rs100
tax:4%
total cost price:Rs104
Product1:
cost price:Rs100
tax:5%
total cost price:Rs105
i want to have final report as:
product1
total cost price:Rs209.
in 2005 .B version
so please help me out....
regards,
varalakshmi.Hi,
If you want to create a base on tax rate, you can, First, goto to Sort and from the Sort properties, set/sort the Product to by ascending the do not check the summarize, then choose the Field where the tax is then check the Summarize then ok.
In you report proper, make a formula for the rate with Content : Concat(Field_rate) then put from the Group values as '1' then uncheck visible, then create a your report since the rate is not visible it will group according to rate and sort according to product.
regards,
Clint -
Dear All,
In the Print layout of Customer Receivables Aging Report i.e Collection Report (System) of SAP B1 8.8 Version Patch 14, all the field areas are given as free text at the document level. Can anyone please let me know, how is it possible?
Thanks & Regards,
SunithaHai Rahul & Gordon,
Thank you for your Information.
Rahul,
I tried using system variable, but still i couldn't do it.
Actually in the Collection Report (Customer Receiveables - Aging) i would like to add a column of original amount in the document level of PLD, even when i define it as system variable,i am not getting the output.
Thanks & Regards,
Sunitha -
Transaction Journal Report - Print Layout Design
Hi all
Is it possible to add Journal Entry Project Codes to this Transaction Journal Report (Print Layout Design)?
I tried to add Journal Entry Project Codes to this system PLD but the result still not showing any Project Code.
KedaleneHi Kedalene Chong
ou don't need a list of variables to use them. Simply go to View -> System Information so whenever you hover around a field with the cursor, in the left bottom corner of the screen you will see the details of that screen along with the variable number if it is a variable.
So you will see something like:
[Form=139 Item=29 Pane=0 Variable=91]
-> in this case the variable number is 91 - use it in Print Layout Designer.
So you can just use the variable specified in these details. When creating the print layout, just go back to your form, stand on a field with your mouse and you will see what variable to use.
Also Check with the PLD Variables Note No 867048...
Symptom
Using system variables when designing a print template for the General Ledger report.
Please note that variable numbers might change when upgrading to a higher version.
Cause
FAQ
Solution
Field Name
Variable Number
Posting Date
62
Due Date
63
Document Date
112
Series
140
Document Number
141
Transaction Number
65
Journal Voucher
66
Reference 1
67
Reference 2
68
Reference 3
69
Details
70
Transaction Code
71
Project Code
72
Costing Code
73
Offsetting Account
74
Indicator
137
Total (LC)
75
Debit (LC)
96
Credit (LC)
95
Balance (LC)
76
Total (SC)
77
Debit (SC)
98
Credit (SC)
97
Balance (SC)
78
Total (FC)
79
Debit (FC)
100
Credit (FC)
99
Balance (FC)
80
Creator
138
Internal Reconciliation
131
External Reconciliation
132
System variables from the Business Partner Master Data window available for use in the General Ledger report:
Phone
117
Fax
118
Contact Name
119
Address
120
Sales Employee
133
Remarks
134
Full Address
135
Hope Hepful
Regards
Kennedy
Maybe you are looking for
-
JAX-RPC And Non-Java Web Service
Hi, This is a total shot in the dark. I'm attempting to consume an RPC web service developed in Delphi. I've created a JAX-RPC client in NetBeans from the published WSDL, attached below. I've created calls to several of the procedures available. What
-
Photoshop CS2 Quits unexpectaly
I have an iMac running 10.4.10 and about a week ago I reinstalled tiger. I also fixed permissions and repaired the disk. Then 3 days later I go to open adobe photoshop CS2 and i t loads... then quits! I have had this problem with many applications si
-
Problem about execute mapping in plsql!
hello forum: i've builded a mapping within owb92,and i want it can be called through a schedule program(from third party),i hope the way i call it like a command line,so the schedule program can deal with it or the way of call the mapping can be wrap
-
Photoshop and Lightroom Bundle
I just updated my Adobe Flash player and got a message stating I could pay $9.99 per month for Photoshop and Lightroom. Does anyone know how long this rate is valid? I searched all of the info about it and couldn't find anything related to how long
-
Find the right sound device in /dev
Hello guys, I want to set the right sound device to record also sound from my internal microphone with xvidcap. For that I have to set the proper sound device /dev/XXX in the settings of xvidcap. But how can I find out which of them is my internal mi