Tracing a background job IP

Hi Gurus,
There was a background job"BIDTPR_22604_1" that was run by the user which has made some undesirable changes in the server.
Now we need to track who ran this background job.
But the problem is that the user is generic and is used by a lot of people.
Also the t-code "STAD" is noy giving any output.
Please update how to track the user on the basis of IP.
Thanks and regards
Sandeep.

Hi,
Please update how to track the user on the basis of IP.
TRy...
Table USR41 stores the IPs with user names and machine names etc temporarily only.
Otherwise run report RSSTAT200 for chking details...
Thanks
Ramakrishna.

Similar Messages

Long time for execution for scheduled CIF background jobs

Hi,
we hv schedlued CIF background job to be run daily around 10.30 PST.
there is large variation for the time required for execution of this job.
on 26 Dec, it took approx 48000 seconds while regular average is 120 seconds only.
today, despite past of 6000 seconds, the job is still in ACTIVE stage.
can anyone know why such long delay for such jobs?
how can i reduce its execution time (as one of case in a week)?
rgds/Jay

Hi Jay,
A few obvious things to look for:
1. Multiple CIF activation jobs running at the same time
2. Large change in the master data, eg new plant, new Material Masters, new customers, etc etc.
3. Conflicts with other non CIF programs that may be going after the same data
4. Communication degradation between the OLTP and SCM clients
Normally you refer such questions to someone on your Basis team, or perhaps your DBA. They can turn on tracing tools that can track the changes in your environment that may be contributing to the changes in run time.
Regards,
DB49

ST12 performance tuning background job

I would like to trace a program which will run about 3 hours. In ST12, I cannot run the program in "current mode" since the execution time is too long. How can I still use ST12 to trace the program execution when the program execute is submitted as background? Pls advise the detail configuration needed in ST12.
Thanks very much for your help!
PS: I tried to use "trace for" user instead of "current mode", and set the tasktype to "BT", when I press "start trace" and start the program background job in another session, seems nothing can be traced...
Edited by: Wing Yin, Anthony TANG on Aug 7, 2009 6:10 AM

Hi,
did you set up the trace on the same server where you background job was running?
3 hours is quite long... not possible to trace the whole execution.
With ST12 / SE30 (ABAP Trace) you can trace at maximum 4293 seconds. For ST05 i don't know no other limit then file size.
However you should not take such big traces.
Start with analyzing the STAD record in order to understand where the time is spent (CPU time, DB time, RFC + CPIC time, ...).
For CPU time you can continue with ST12 / SE30, for DB time you need ST05 and for RFC + CPIC time you can check the RFC Subrecords in STAD to see the 5 most expensive RFC calls (destination and FM).
In case of DB time a SQL Cache reset before the job execution and a delta analysis after the execution could help as
well if there is not too much other DB load on the system.
You can take some samples with traces. Start n traces with a few minutes duration and check the results agains STAD (overview). E.g. if according to STAD most of the time is spent in DB time but your sample trace shows mostly CPU time,
your sample is probably not a a good sample (not showing you a part where most of your time is spent).
Other than that, if your Batch Job is your program, you cann add some mesages to the job log to narrow down what part
of the programm consumes time (data selection, data processing, ...) . Another option is to evaluate if you can reduce the
processed data volume to take a trace in order to find out expensive parts of the program. This of course can change the
execution (e.g. of SQL statements) significantly.
You see analyzing long running batch processes could be a challenge
Kind regards,
Hermann

Problems creating background job for program (job open, submit and close)

Hi gurus,
im trying to start a background job using the FM BP_START_DATE_EDITOR to show the start date to the job or if it's imediate. this FM it's working fine, after call it im opening a job, submiting it and call the job close FM and the job close FM creates me the job.
The problem it's when i go to the sm37 to see the job status the job has been canceled, and the job log says that i have to give a start date to the job.
What i dont understand it's either the job is imediate or i choose a date to start the job always gives me this error...
Below goes my code,
any ideas will be rewarded
CLEAR: stdt_modify_type, stdt_output.
CALL FUNCTION 'BP_START_DATE_EDITOR'
 EXPORTING
 stdt_dialog = 'Y'
 stdt_input = stdt_input
 stdt_opcode = 14
 IMPORTING
 stdt_modify_type = stdt_modify_type
 stdt_output = stdt_output
 EXCEPTIONS
 fcal_id_not_defined = 1
 incomplete_last_startdate = 2
 incomplete_startdate = 3
 invalid_dialog_type = 4
 invalid_eventid = 5
 invalid_opcode = 6
 invalid_opmode_name = 7
 invalid_periodbehaviour = 8
 invalid_predecessor_jobname = 9
 last_startdate_in_the_past = 10
 no_period_data_given = 11
 no_startdate_given = 12
 period_and_predjob_no_way = 13
 period_too_small_for_limit = 14
 predecessor_jobname_not_unique = 15
 startdate_interval_too_large = 16
 startdate_in_the_past = 17
 startdate_is_a_holiday = 18
 startdate_out_of_fcal_range = 19
 stdt_before_holiday_in_past = 20
 unknown_fcal_error_occured = 21
 no_workday_nr_given = 22
 invalid_workday_countdir = 23
 invalid_workday_nr = 24
 notbefore_stdt_missing = 25
 workday_starttime_missing = 26
 no_eventid_given = 27
 OTHERS = 28.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 MOVE 'X' TO gv_flag.
ENDIF.
DATA jobname LIKE tbtcjob-jobname.
DATA jobcount LIKE tbtcjob-jobcount.
DATA job_release LIKE btch0000-char1.
DATA job_imediate TYPE c.
CLEAR: jobname, jobcount, job_release.
CONCATENATE 'MAPAEXEC' sy-uname sy-datum
 INTO jobname SEPARATED BY space.
CALL FUNCTION 'JOB_OPEN'
 EXPORTING
 jobname = jobname
 IMPORTING
 jobcount = jobcount
 EXCEPTIONS
 cant_create_job = 1
 invalid_job_data = 2
 jobname_missing = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 MESSAGE i003(zmapas).
 EXIT.
ENDIF.
SUBMIT z_mapa_execucao_orcamental
 VIA JOB jobname NUMBER jobcount
 WITH ano EQ ano
 WITH so_perio IN so_perio
 WITH so_date IN so_date
 WITH so_org EQ so_org
 WITH so_num IN so_num
 AND RETURN.
IF stdt_output-startdttyp EQ 'I'.
 CLEAR job_imediate.
 job_imediate = 'X'.
ENDIF.
CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 calendar_id = stdt_output-calendarid
 event_id = stdt_output-eventid
 event_param = stdt_output-eventparm
 event_periodic = stdt_output-periodic "?
 jobcount = jobcount
 jobname = jobname
 laststrtdt = stdt_output-laststrtdt
 laststrttm = stdt_output-laststrttm
 prddays = stdt_output-prddays "??
 prdhours = stdt_output-prdhours "?
 prdmins = stdt_output-prdmins "??
 prdmonths = stdt_output-prdmonths
 prdweeks = stdt_output-prdweeks "?
 predjob_checkstat = stdt_output-checkstat
 pred_jobcount = stdt_output-predjobcnt
 pred_jobname = stdt_output-predjob
 sdlstrtdt = stdt_output-sdlstrtdt
 sdlstrttm = stdt_output-sdlstrttm
 strtimmed = job_imediate
 targetsystem = stdt_output-instname
 start_on_workday_not_before = stdt_output-notbefore
 start_on_workday_nr = stdt_output-wdayno
 workday_count_direction = stdt_output-wdaycdir
 IMPORTING
 job_was_released = job_release
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 OTHERS = 8.
IF sy-subrc <> 0.
 MESSAGE i003(zmapas).
 EXIT.
ELSE.
 MESSAGE i004(zmapas) WITH jobname.
ENDIF.
Thanks in advance,
Best Regards
João Martins

Hello João.
In debug mode, check the value of variables you passed to parameters sdlstrtdt and sdlstrttm.
As aditional info, I usually achieve your goal without FM BP_START_DATE_EDITOR.
Check this code:
CALL FUNCTION 'JOB_OPEN'
 EXPORTING
 jobname = w_jobname
 IMPORTING
 jobcount = w_jobcount
 EXCEPTIONS
 cant_create_job = 1
 invalid_job_data = 2
 jobname_missing = 3
 OTHERS = 4.
CHECK sy-subrc = 0.
CLEAR seltab_wa.
MOVE: t_jobs-param TO seltab_wa-selname,
t_processar-line+34 TO seltab_wa-low.
APPEND seltab_wa TO seltab.
seltab_wa-selname = 'P_LOJA'.
seltab_wa-low = t_processar-ficheiro+7(4).
APPEND seltab_wa TO seltab.
*** Submete o programa para o JOB
SUBMIT (t_jobs-repid)
WITH SELECTION-TABLE seltab
USER sy-uname
 VIA JOB w_jobname NUMBER w_jobcount
 AND RETURN.
*** Encerra o JOB
l_hora = sy-uzeit.
ADD 60 TO l_hora.
CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = w_jobcount
 jobname = w_jobname
 sdlstrtdt = sy-datum
 sdlstrttm = l_hora
 targetserver = w_servidor
 IMPORTING
 job_was_released = l_liberado
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 OTHERS = 8.
Regards.
Valter Oliveira.

Scheduling one background job inside another

Hi All,
Is it possible to Scheduling one background job inside another.? i.e In my Z program I am calling job_open, job_submit, job_close and to execute one standard report in background. And after that I am executing my Z program itself from SE38 as Program->Execute->Background->Execute Immediately. Is this logically correct? I am asking this because I am not getting the desired result
Thanks & Regards,
Neethu.

HI,
Check the job steps in SM36.
First schedule the Standard job and in the job steps schedule the z report.
Schedule job in chain

Background Job pass value

Hi, I am calling a Background job in my program. I am using JOB_OPEN, JOB_SUBMIT and JOB_CLOSE FM to start a job. My need is to pass a value to the job program(job program doesnt have any selection screen values). Is their any way without creating variants each time to pass value to it.
Please advice.....

Hello,
You can first use JOB_OPEN which returns job number. Then build ranges or parameters to use SUBMIT to call the program.
Eg: SUBMIT RM06BB20 AND RETURN
      WITH S_EKGRP IN R_EKGRP
      WITH S_EKORG IN R_EKORG
      WITH S_FLIEF IN R_FLIEF
      WITH S_KONNR IN R_KONNR
      USER sy-uname VIA JOB w_jobname
      NUMBER w_job_number.
Now use JOB_CLOSE.
Thanks,
Venu

How can i get Background Jobs list which is made me?

I created background job using JOB_OPEN and SUBMIT and JOB_CLOSE.
I need to Background Job list which is made me..
Do u know any function or logic?
plz~

[BP_JOBVARIANT_OVERVIEW|http://help.sap.com/saphelp_45b/helpdata/en/fa/096ccb543b11d1898e0000e8322d00/frameset.htm]
BP_JOBLOG_READ

Submit RSEOUT00 as background job

Hi all,
Here is my requirement.There is a Z program from which RSEOUT00 program has to be called , so that it will change the Idoc status to '03'. I tried using Submit RSEOUT00..and return and also tried JOB_open and then SUBMIT rseout00 WITH docnum EQ p_idocno user sy-uname via job jobname number jobcount and return and then JOB_CLOSE .I checked SM37 also where i can see this job as finished..
I tried COMMIT WORK statement and also WAIT statement .
But still the idoc status wont change to '03' .
Can anyone plase advise on how to correct this .
Regards,
Sudheer

Hi,
I have created background job for RSEOUT00 and written the below code. It worked.
DATA: w_number TYPE tbtcjob-jobcount,
 w_name TYPE tbtcjob-jobname VALUE 'ZTEST_JOB'.
 CALL FUNCTION 'JOB_OPEN'
 EXPORTING
 jobname = w_name
 IMPORTING
 jobcount = w_number
 EXCEPTIONS
 cant_create_job = 1
 invalid_job_data = 2
 jobname_missing = 3
 OTHERS = 4.
 IF sy-subrc = 0.
 SUBMIT rseout00 VIA JOB w_name NUMBER w_number AND RETURN.
 IF sy-subrc = 0.
 CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = w_number
 jobname = w_name
 strtimmed = 'X'
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
 ENDIF.
Thanks,
Appanaboina

Error while scheduling Background Job for User/Role Full Synchronization

Hi all,
We have installed RAR 5.3 Component and uploaded the authorization data & established the connectors to the backend system.
We have performed all the post installation activities and everything is complete.
When we have scheduled User -Full Synchronization with the Back End system as a part of Post Installation Activity we are receiving the below error message
"Error while executing the Job:Cannot assign an empty string to host variable 2."
Also the VIEW LOG/ Terminate Job buttons are disabled in this screen.
Can somebody please help us in resolving the above issue
Thanks and Best Regards,
Srihari.K

Hi,
We are copy pasting the error log (Part as it is huge) below here. We could able to do Full Synch for Roles and also for Profiles. Only for User Synch we are getting this error and none of the users are sychronized to RAR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WILSONA of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WINDC of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WLADICHJ of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WUK of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user ZENGS of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user ZHENGL of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: All System Flag:false=====Last Batch Flag:true
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis loadUserData
INFO: @@@ User sync completed for params true: Syskey List is [HL2-QAHR]
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob run
WARNING: *** Job Exception: Cannot assign an empty string to host variable 2.
com.sap.sql.log.OpenSQLException: Cannot assign an empty string to host variable 2.
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
     at com.sap.sql.types.VarcharResultColumn.setString(VarcharResultColumn.java:57)
     at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:511)
     at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setString(PreparedStatementWrapper.java:355)
     at com.virsa.cscext.dao.CSCDAO.updateIgnoredUserData(CSCDAO.java:1388)
     at com.virsa.cscext.dao.CSCDAO.populateGenObjUser(CSCDAO.java:1169)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.populateGenObj(BatchRiskAnalysis.java:868)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.insertBAPIUserData(BatchRiskAnalysis.java:142)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.loadUserData(BatchRiskAnalysis.java:390)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1275)
     at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
     at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 13 Status: Error
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job:Cannot assign an empty string to host variable 2.
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=13, status=2, message=Error while executing the Job:Cannot assign an empty string to host variable 2.
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>13----
Please let us know how to resolve this error
Thanks and Best Regards,
Srihari.K

Internal error occurs in background job scheduling

Hi Experts,
We are facing an error message "Internal error occurs in background job scheduling" while trying to execute a custom report(Z report) in background in SA38.
Please find the following observation on our side on this message.
1) This message is not coming for only one report not for others.
2) SU53 screen shot shows that SE38 check is failed, but the weird thing is not happening for other report.
3) Persons having SE38 auhtorization are able to run this report.
Please advise.
Thanks in advance,
Viven

What is the message ID and number? Have you tried OSS search and debugging?
What does this program do, in a nutshell?

BWREMOTE background job canceled in sap r/3 system

Hi my friends,
Thanks for your help ahead.
Today I checked the background job in SAP R/3 created by BWREMOTE via SM37. It showed me some jobs had been canceled.
I displayed its log, the detail message is:
==========================================
Step 001 started (program SBIE0001, variant &0000000083494, user name BWREMOTE)
DATASOURCE = ZQM_NOT_SHFGRP
Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 1,593 records
Result of customer enhancement: 1,593 records
Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 1,593 records
ABAP/4 processor: SAPSQL_INVALID_FIELDNAME
Job cancelled
==========================================
Then I displayed the "Long Text" of the job log. It is
One of the field names in the SELECT clause was not recognized.
Error analysis
The SELECT clause was specified in an internal table at runtime.
It contains the field name "TPR00", but this does not occur in any of
the database tables listed in the FROM clause.
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLXRSA " in
"EXIT_SAPLRSAP_001".
The main program was "SBIE0001 ".
Source code extract
008840 concatenate 'TPR'
008850 day_temp+6(2)
008860 ' = '
008870 ' ''' zshift '''' into
008880 cond .
008890 append cond to itab .
008900 select schkz into i_not_shfgrp-zzschkz from t552a
008910 where zeity = '2'
008920 and mofid = 'CN'
008930 and mosid = '28'
008940 and ( schkz = 'SFTA' or
008950 schkz = 'SFTB' or
008960 schkz = 'SFTC' or
008970 schkz = 'SFTD' )
008980 and kjahr = day_temp+0(4)
008990 and monat = day_temp+4(2)
> and (itab) .
009010 endselect.
I guess that there is not a field named TPR00 in table t552a.
Next, I opened the 'project management of sap enhancement' via CMOD, entering the project name and chosing 'Display'.
Then Double click the Components 'EXIT_SAPLRSAP_001', we can see the function module 'EXIT_SAPLRSAP_001'. In the source codes, there is an include program, it is 'INCLUDE ZXRSAU01.'.
Then, I double clicked the Include program and find the position program terminated. The source codes are:
ZQM_NOT_SHFGRP *
when 'ZQM_NOT_SHFGRP'.
loop at c_t_data into i_not_shfgrp .
l_tabix = sy-tabix .
clear :mbatch ,zshift,cond ,zfield, zcharg, day_temp .
refresh itab.
if i_not_shfgrp-ausvn is initial.
else.
aa = '080000'.
bb = '160000'.
cc = '235959'.
day_temp = i_not_shfgrp-ausvn.
if i_not_shfgrp-auztv ge aa and
i_not_shfgrp-auztv lt bb .
zshift = 'MSHF' .
elseif i_not_shfgrp-auztv ge bb and
i_not_shfgrp-auztv le cc .
zshift = 'LSHF'.
else .
zshift = 'NSHF'.
day_temp = i_not_shfgrp-ausvn - 1.
endif.
concatenate 'TPR'
day_temp+6(2)
' = '
' ''' zshift '''' into
cond .
append cond to itab .
select schkz into i_not_shfgrp-zzschkz from t552a
where zeity = '2'
and mofid = 'CN'
and mosid = '28'
and ( schkz = 'SFTA' or
schkz = 'SFTB' or
schkz = 'SFTC' or
schkz = 'SFTD' )
and kjahr = day_temp+0(4)
and monat = day_temp+4(2)
and (itab) .
endselect.
endif.
I found that we got a TPR00 during concatenation. In other words, day_temp+6(2) = 00. But I think it is impossible. I can not explain this.
Any ideas, my friends. Many thanks.

select schkz into i_not_shfgrp-zzschkz from t552a
where zeity = '2'
and mofid = 'CN'
and mosid = '28'
and ( schkz = 'SFTA' or
schkz = 'SFTB' or
schkz = 'SFTC' or
schkz = 'SFTD' )
and kjahr = day_temp+0(4)
and monat = day_temp+4(2)
and (itab) . => doesn't make sense?!
endselect.
endif.
it seems something got deleted between 'and' and '(itab)'... so, you'll have to recheck the requirements for your select to fill the 'and' statement further.
so, it should look like
and monat = day_temp+4(2)
and <some kind of condition that needs to be fulfilled>.
endselect.
<some logic to fill a line in your internal table>.
append cond to itab.
endif.
obviously <some kind of condition that needs to be fulfilled> needs to be replaced by a real condition
and <some logic to fill a line in your internal table> needs to be replaced by some kind of formula
I assume something like (otherwise it would be really weird to select that field):
cond = i_not_shfgrp-zzschkz.
or a formula using the i_not_shfgrp-zzschkz field.
It would also be a lot better to replace your select ... endselect by a select single as you'll be selecting 1 record only anyways.
Message was edited by:
RafB

How to find Spool number for a 2 steps background job.

Hi All,
How to find spool number (and also the background job name ) for a 2 steps background job.
in the table TBTCO i can see step numbers but i dont get the spool number. Is there any link between TBTCO and TSP01.
Also after getting the spool number i need to drill down on ALV report. I hard coded the spool number and was able to drill down using BDC and call transaction but when i press back button it is not returning to the ALV report.
Thanks,
Shiva.

Which one creates the spool? (first one I guess)
What kind of spool? (WRITE, sapscript, smartform, pdf...)
Do you use special statements like NEW-PAGE, or other things?
Are you sure that the spools are generated by these jobs? (did you compare the spool generation times and job run dates to be sure...)

System exception while deleting the file from app server in background job

Hi All,
I have a issue while the deleting the file from application server.
I am using the statement DELETE DATASET in my program to delete the file from app server.
I am able to delete the file from the app server when i run the program from app server.
When i run the same report from background job i am getting the message called System exception.
Is there any secuirity which i need to get the issue.
Thank You,
Taragini

Hi All,
I get all the authorization sto delete the file from application serever.
Thing is i am able to run the program sucessfully in foreground but not in the background .
It i snot giving any short dump also just JOB is cancelled with the exception 'Job cancelled after system exception ERROR_MESSAGE'.
Can anybody please give me suggestion
Thanks,
Taragini

How to avoid use of function module in case of background jobs?

Hi ,
I am working a file tranfer interface .Functionality is to extract file either apllication or presentation server , and process the file through bapi , send the result in their respective server. This program should run through batch jobs in background mode.
I am using following function module :
SUBST_GET_FILE_LIS : Get the file list from application server
TMP_GUI_DIRECTORY_LIST_FILES : Get the file list from presentation server
GUI_UPLOad : to extract file data from presentation server
GUI_downLOAD : to download data to presentation server
in case of background job these function modules will not work.... so how to resolve this issue...
what are the methods we can apply?
Thanks & Regards
Sandeep

Hi,
This FM is used to get list of files from Application server (will work in Background). This cannot be used to list files from presentation server. There is no way , by which you can process presentation server files in background mode.
Regards
Vinod

HOw to find out a report name when you know only the name of background job

Hi experts ,
my question is i need to find out teh report name for which i knew only the background job name of the report .
thanx
Venky.

Go to tcode SM37->Give job name and execute->choose tool bar button STEPS (Disply Steps list) ->Then you will get program or command

Tracing a background job IP

Similar Messages

Maybe you are looking for