Transaction tab of business blueprint

In solution manager 7 EhP1, for business blueprint, we want to add the transaction code on the "Transactions Tab" page,
what is the advantage for it? do you give me some good advice to process step?
can you give me some docs/links related to "transaction tab"? thank a lot!

Hi
please look this help link [http://help.sap.com/saphelp_smehp1/helpdata/en/35/62d96b453b11d5b38a0050dade3beb/content.htm|http://help.sap.com/saphelp_smehp1/helpdata/en/35/62d96b453b11d5b38a0050dade3beb/content.htm]
Jansi

Similar Messages

Business Process Repository is sometimes confusing on transaction tab

I am Using SOLAR01. While creating scenarios and especially business processes by using BPR content, sometimes no transactions are listed in transactions TAB for a business process, but transactions are listed in business process steps. And in contrast sometimes the transactions are listed on Business process level and missing in Business process steps. This is confusing.
We are using SOLMAN 4.0 with ST-ICO-150 content.
An ECC6 system is assigned to project.
For example:
I choose as scenario 'Procurement and Logistics execution process for ERP' from standard BPR content.
System provides me a huge list of Business Processes.
I activate Business process 'Outbound process with WM' and goto Transactions tab. I see no transactions. But Process steps are included like 'Create Delivery' and on steps level there are transactions listed.
Same thing with most of the business processes in this standard BPR derived scenario.
Another example in contrast (for same BPR derived scenario):
I activate Business process 'Purchase Requisition with Service Directories' and goto Transactions tab. I see MANY transactions. Process steps are included like 'Release purchase requisition' and on steps level there are NO transactions listed.
In fact, the cases when transactions are available on Business process level have 'Execute' icon before the BP name in the structure tree on left-hand side area.
Can somebody explain me, why transactions from BPR content are assigned sometimes on BP level and sometimes on BP step level. In my opinion they should be on both levels. BP level should contain all transactions and BP step level only those transaction relevant for that step.
BR: Kimmo

Kimmo,
We are using the BPR content to develop process flows using ARIS for NetWeaver. Our experience is very similar to yours, to the extent that we hired an SAP consultant to help us map transactions back down to the process steps.
In the end, the value of the BPR is diminished if the transactions are not properly mapped to the process steps. We have found very few SAP experts who are even aware of the BPR (this includes actual SAP staff), but all are familiar with the transactions required to run the software. For an architect looking to have business processes designed with referenced objects the BPR is invaluable. How I long for the days of the ASAP R/3 reference model!
Mike

How to add a New Tab in Business Partner Transaction

Hi Friends,
Please help me out to "How to add a new Tab in Business Partner Transaction?
Regards,
Ricky

Hi Rajendra,
It will be gratefull to have some EEWB docuement.Can you please forward me ?
Regards,
Ricky
Edited by: Ricky Maheshwari on Dec 21, 2009 6:51 PM

Missing Logical Component in Solar01-Transaction Tab

We have setup several logical components and assigned it to our project template. We then executed transaction SOLAR01; navigate to the "Business Blueprint Structure", "Master Data" and then the "Transactions" tab; we could only select One Logical Component. The rest of them are NOT being display at all. Any idea why?
Interestingly, when we naviate to the Business Blueprint Structure" \ "Business Scenario" - All the logical components are available again. But go down another level from there' and we are back to one logical component again.
Thanks in ahead to anybody that could shed some light in this.

Hi,
logical components are assigned directly to master data objects, organizational units and process steps. Thus, these objects are part to the corresponding system. Therefore, it is only possible to assign content on tabs belonging to these objects that have the same product assigned. This is the reason why only one logical component is available on this level in your project. On scenario or process level, all logical components are available.
Best regards,
Michael

Generating Business Blueprint

Hi,
I seem to be having problems generating the business blueprint, we are doing an HCM project and i have defined the following in SOLAR01
1. Organizational Units
2. Master Data
3. Business Scenarios
under the business scenarios, i have assigned the business proccesses from the HCM component.
my question is, is there any transactions that must be assigned to each individual business process?
the business blueprint comes up blank, but i have the structure, the master data and the business scenarios.
what am i missing in the setup?

Hi Trevor,
If you are in Business Scenario Section in SOLAR01 - make sure you select and give the following information.
Organizational Unit
Master Data
Business Processes
eg:-
if you select Sales as Business Scenario
once you click on Sales - in your right hand side you will see Proj.Documentation Section there you upload your business process Document/Blue Print and Blueprint-Relevant Tab should be checked.
and make sure you have given the following.
In Organizational Units
Sales Organization, Distribution Channel, Division, Sales Area, Sales Office and Sales Group
In Master Data
Customer Master Records, Product Master Records, Condition/Pricing,Cusotmer Employee Master..etc.
In Business Process
Sales Order Processing
Regards
Rayees Palot

Business Blueprint Structures in Solution Manager

Hi,
Can we change the structure node names under Business Blueprint tree on Solution manager. This is accessed by SOLAR01 transaction.
Thanks and Regards,
Vinayak Thorat

Hi Sai
answer is more simple the way you add standard business process in structure tab solar01, same way you can add master data or organization model for business process.
e.g.
you can add customer master or vendor master as a master data for a E2E process
in all the situation we use this because practically no process works without master data but its upto the level of documentation you want to make in solution manager rather than dumping project documents only and making it more meaningful by adding above
i hope you have got the answer now
Regards
Prakhar

Getting error while generating Business Blueprint Document for Project

Hello Experts,
I hv created a project in Solution manager 3.2 through solar_project_admin . Now iam in the phase of defining its Business Blueprint . I hv completed the steps, at the end when iam generating Business Blueprint document ,following error is being displayed:
Blueprint document cannot be created. Check the selection
Message no. SOLAR110
Diagnosis
A Business Blueprint document created for the selected selection options would contain no structure elements. It would be empty, so it is not created.
Procedure
Choose less restrictive selection options, especially the option
"Print Structure Elements: Complete Selection" in the "Options" tab.
I hv checked this error and the option displayed above in the error message but no such option is being displayed anywhere,can anyone plz help me out with how to resolve this problem?
Requested to revert at earliest as iam stuck with this since many days,My email id is [email protected] .
Regards,
Saumya

Hello Horst ,
Thanks for ur reply.I hv now again tried to Generate Blueprint Document with unselecting option Only with Documents but in the structure selection when i tick on all the options given in tat structure then regenerate Business blueprint Document ,following error message is displayed:
Error 130: Business Blueprint cannot be generated
Message no. AI_SOLAR08130
For this error no long text/ explaination exists .But when i try to generate Business Blueprint Document with unselecting option Only with Documents but in the structure selection unticking on all the options given in tat structure then following error message is displayed:
Blueprint document cannot be created. Check the selection
Message no. SOLAR110
Diagnosis
A Business Blueprint document created for the selected selection options would contain no structure elements. It would be empty, so it is not created.
Procedure
Choose less restrictive selection options, especially the option
"Print Structure Elements: Complete Selection" in the "Options" tab.
Plz revert back, wt shld i do now?
Regards,
Saumya

I modified the budget categories on the numbers template so now the transaction tab does not communicate with the budget tab. I figured out how to change the drop down options but how do I get it to reflect on my budget sheet? Please help.

If you are familar with the Numbers Budget Template it has two tabs 'Budget' and 'Transactions'. If you use the template as it is designed when you input expenses on the transaction tab it will automatically add that amount into the selected category on the budget tab. I have madified my budget tab to reflect the caegories that I need, which included adding several to the template. I also added to the table so it reflects my income and expenses so I can track where I am at with a glance. Since I did this, I can't get my transactions tab to communicate with the budget tab. I figured out how to change the options in the drop down box for category but I con't figure out how to get it to reflect onto my budget tab. I'm sure that it is an easy fix, however, I am just not well versed in Numbers. I appreciate your time in helping me with this issue.
Respectfully,
Jon

My guess is that while you added catetories to your Budget Sheet by adding new lines and filling in the category column, you didn't also add the formulas to these new budget lines.
The proper way to add those lines would have been to select a cell in the line just above where you want to add a line and type Option/Alt-DownArrow. This would have copied the formulas into the new line. Maybe you did this, and maybe not. You didn't give details on how you added the lines.
Select C2 and D2 and Command-C to copy them to the Clipboard.
Select all the cells of Columns C and D except for the top and bottom rows and Command-V to Paste.
If I have properly guessed the problem, you should be in business. This assumes that your Categories are exaclty the same as the entries in your Pop-up menus. Spelling counts, as does case.
Jerry

Business Blueprint

Hello
I was reading an article on SAP and came across the word business blueprint.Is this something like your functional specifications or entirely different from that ?
Googled the word and came across a few blueprints but I am unable to co-relate it with SAP.
Kindly shed some light on blueprint in SAP and also request you to send some material on this, probably a sample blueprint.
Thanks a lot
Jessy

Hi Jessy,
Business Blueprint is a phase in the project where you study the current business process of the client in As Is stage and then try to provide a solution to the business requirements in the To Be stage using the Best Practices suggested by SAP. The org structure, Transaction types, business steps, Gaps in the solution etc are maintained in the Business Blueprint doc.
Based on the BBP doc the realization is done in the realization phase.
Functional specifications are created when some functionality needs to be developed to meet the business requirement. The functional specification gives the functional requirement and the output desired from the technical development.
BR,
Rekha Dadwal
Kindly reward with Points!!!!

Difference between business blueprint and functional spec

hello
can somebody please tell me the difference between business blueprint and functional spec and how they are interrelated
Thanks

Hi Comandante,
Business Blue print is a detailed documentation of the requirements gathered from client (The objects we need to develop are modified depending upon clients requirements).It represents the business process requirements of the company. It is an agreed statement of how the company intends to run its business within SAP system.
Functional specifications (functional specs), in the end, are the blueprint for how you want a particular report and transaction to look and work. It details what the report will do, how a user will interact with it, and what it will look like. By creating a blueprint of the report or transaction first, time and productivity are saved during the development stage because the programmers can program instead of also working out the logic of the user-experience. It will also enable you to manage the expectations of your clients or management, as they will know exactly what to expect. Functional Spec streamlines the development process.
A functional specification is a formal document used to describe in detail for software developers a product's intended capabilities, appearance, and interactions with users. It guidelines and continuing reference point as the developers write the programming code.
Other processes include Requirements, Objectives,Logic Specification,User documentation,The Final Product.
Hope this Helps, Revert for any further info.
Cheers,
Tanish

Ability to duplicate objects in transaction tab

I am using Solution Manager 3.2. I am building "worksteps" (sequecing transactions and programs) in to the transaction tab at the business process step level. Currently, if I attempt to add an object (transaction or program) more that once, I get the following message "Specified key already exists." Is there a way to allow duplicates objects to be added in the same business process step.

Hi,
I am afraid this is not possible without code modification. You would need to change the message to a warning instad of an error. The data storage allows to store duplicates on this tab.
Regards
Andreas

Graphical Business Blueprinting : Technical Requirements and Setup

Dear All,
I am trying to use the Graphical Business Blueprint in Solution Manager 7.1
I followed the following steps in a bid to complete the product technical setup.
Installed the So-Co Add on using SAINT transaction. No special steps, just normal add-on installation.
Followed the steps in the setup guide for BPB (define logical ports, endpoints, services, aliases)
I am able to then load the http://hostname:port number/ebb/setup.asp web page to create a new workspace and thus create my own text file.
Then I install the BPBxxxx.exe client on my local machine, and am able to see my solution manager's name there, and log-in and validate my credentials.
However when I click on "open existing business blueprint ", it just stays as is, no dialog box nothing.
In my Solution Manager 7.1, there is 1 project , which has business processes dragged from the Business Process Repository (BPR). (This is a sandbox system, in an isolated environment, not connected to any other system, hence no logical components are defined et all. )
Now is there a trick I am missing to view the project defined in Solution Manager system?
Any help is greatly appreciated!
Cheers!

Hi,
For me, the issue I faced was that the service user assigned to the logical port (LP_SOCO_SOLAR) did not have the authorisation role SAP_SOL_KW_ALL at time of creation of the logical port. Adding it to the service user later on made no difference.
I created the logical port LP_SOCO_SOLAR with a service user with the following authorisation roles and associated profiles:
/SOCO/FABRIC_ADMIN
/SOCO/FABRIC_USER
SAP_BC_WEBSERVICE_ADMIN
SAP_BC_WEBSERVICE_CONFIGURATOR
SAP_BC_WEBSERVICE_CONSUMER
SAP_SOL_KW_ALL
SAP_SOL_PROJ_ADMIN_ALL
SAP_SOLAR01_ALL
SAP_SOLAR02_ALL
I am now able to open the project list, access and edit the business blueprint for my implementation projects.
Hope this helps.
Kind regards,
Patrick

Create new Tabs in business scenarios

Hi,
Short question, is it possible to create extra tabs in the business scenario's of a project? Next to General documentation and project documentation we want to create additional Tabs since the Tabs present do not cover all our documentation needs.
Is this possible?
Thanks
Tom

Hey Tom,
Unfortunately its not possible to have additional tab in Business scenario of the project.
Additonal tabs is possible only for selected business transaction types.
This could be done using EEWB tcode.
However EEWB does not support this screen enchancement on Projects.
To sum up, its not possible.
Hope this clarifies your queries ...
please reward for usefull answer.
Regards
Anand.

Business Blueprint Template Download

Using transaction solar_project_admin and following the menu path of project --->Business Blueprint there are 2 options Template Download and Content Upload. Does anyone know what these options are for and how they can be activated?

Hi, Senthil
I am facing the same issue , if u have managed to resolve it, could u please share the same.
my email add--> [email protected]
Iam lil new to Sol Man and if you could add me in any of the messenger it would help my cause a great deal.
thanks
subhro

Problem in pricing regardinr business blueprint

HI Gurus,
i am new in sap sd field i just put my foot in this field.
i got business blueprint for sap sd implementation i have folloing problem in pricing please help me out.
1.Do you require the functionality to create user-defined indexes in the pricing table? This will enable you to search for your prices using company-specific search criteria such as what operation input ?what prices on a certain day?
2 Do you ever base the prise of an item on the cost to manufacture or purchase the material?
3. Eill you need to pas pricing information to the sales informatiom system?
how to configure above requirement in business blueprints?
please solve this problem
Ketan Katara

I install Oracle Business Process Architect 11g again but with local DB. there is quick start example. when I share blueprint that project, It is ok but when I add a repository server and share a project inside it nothing happen.
I dont know why???? please help me.
sorry for my bad english :(

Transaction tab of business blueprint

Similar Messages

Maybe you are looking for