Transfer of data from flexible planning to PIR table when saving the trans.
Dear all.
I have a query regarding Flexible LIS Planning (MC93 or MC94). My question is about on transaction MC94. When I save the data on this transaction, it automatically transfers to PIR (Planned Independent Requirement) table. I donu2019t know how this been done by the consultant; is this a configuration, abaping or any enhancement? Any one has any idea regarding this please advice.
I am very thankful for your help.
Hello,
This is 100% SAP standard functionality.
Go to transaction MC7F.
There, pick your Info structure SXXX and go in the details of it (CtrlShiftf2 or loop icon)
In the bottom right of your screen there is a block called "synchronization of planned independent requirements".
Delete the data that is there or simply untick the requirement "active" check box.
Alternatively, in that same screen above in the right there is a block called system paramaters - the least setting is transfer to demand management with user exit - uncheck that.
Hope it helps.
Similar Messages
-
pls send ans for this
1b5595eb-fcfc-48cc-90d2-43ba913ea79f wrote:
pls send ans for this
use any text editor to eliminate the dot before loading -
Billing Plan Billing Block Change when saving the sales order
Dear Gurus,
We have SD Integrated with PS. We create the sales orders and pull the billing plans milestones from WBS.
Once we generate the billing plans, system will propose the billing block for all the line items of the milestones which normally comes from the billing plan configuration/item category.
Would like to know the appropriate userexit to change the Billing block to "XX" if some of the requirements are not met when we create or change the sales document.
Below is what i am able to see but seems to be not helpfull.. please guide..
User exits in program RV60FUS1
BILLING_SCHEDULE_DELTA
For milestone billing a percentage value is fully invoiced for each billing deadline. In the case of deviations between the original item value and any later changes, you can use the user exit to determine whether the difference should be stored in the final invoice or sent to the next deadline.
USEREXIT_MOVE_FIELD_TO_FPLT
This user exit allows you to create your own fields in table FPLT.
USEREXIT_MOVE_FIELD_TO_FPLA
This user exit allows you to create your own fields in table FPLA.
Reward points for the right answers..
Regards
RamDear Friend,
I hope you can make it with the above user exits.Consult your abaper and try it.
Thank you, -
Problem with reading data from screen and inserting in table
hi ther,
im new to abap-webdyn pro. can anyone suggest how to read data from screen and insert into table when press 'ADD' button.
i done screen gui , table creation but problems with action. what the content of acton add.
is ther any link that helps me or tut??
thankx in advance!
regardsHi,
Create a context node for the screen fields for which you want to enter the values with cardinality 1.1.....
Now in the layout of your view bind the screen input fields to that context node(attributes) to the value property of the input fields...
Now in the action of ADD button....
--> go the wizard and select the read node button and select the node which you have created it generates the auto code for you.....
for example if the node is contains aone attribute like MATNR
reading the node from wizard will generate the code as....
DATA lo_nd_matnr TYPE REF TO if_wd_context_node.
DATA lo_el_matnr TYPE REF TO if_wd_context_element.
DATA ls_matnr TYPE wd_this->element_matnr.
DATA lv_matnr TYPE wd_this->element_matnr-matnr.
* navigate from <CONTEXT> to <MATNR> via lead selection
lo_nd_matnr = wd_context->get_child_node( name = wd_this->wdctx_matnr ).
* @TODO handle non existant child
* IF lo_nd_matnr IS INITIAL.
* ENDIF.
* get element via lead selection
lo_el_matnr = lo_nd_matnr->get_element( ).
* @TODO handle not set lead selection
IF lo_el_matnr IS INITIAL.
ENDIF.
* get single attribute
lo_el_matnr->get_attribute(
EXPORTING
name = `MATNR`
IMPORTING
value = lv_matnr ).
here the variable lv_matnr will contain the entered value......
now you can use this value for further process.
Thanks,
Shailaja Ainala. -
What's the RFC name for BPS to transfer data from one Plan-Area to another?
I created a role for BPS planner.This include all authorization except the RFC authorization for transfering data from one plan-area to another.However, even I set the '*' to the RFC name. Am I missing something? Any suggestion is appreciated.
Best regard,
Gerald HeHi Vlad,
Thanks for your reply. It's helpful.
Finally, I found that this error message will be pop-up when the authorization is not right. For example, if you don't have right authorization to access the corrsponding InfoCube which the BPS is based on. Now, I find the root cause and fixed this issue.
Best regard,
Gerald -
Does exist a way to read data from IP planning cube with ABAP?
Hello All.
My scenario is as follows:
I have an ODS where we store costcenters to be planned. This ODS is loaded via a manual falt file load (regular dta transfer process). In order to avoid inconsisten data in the planning cube, I want to check in my ODS load process, if any costcenter which is already planned (it has planned data in my planning cube) is being deleted in the loaded file.
To do this, I need to access my planning data cube ( i guess also planning buffer), so my question is if there is any function module which retrieves data from a planning level as reference data.
Thanks a lot and best regards,
Alfonso.Hi Alfonso,
note 1101726 shows how the plan buffer can be read.
l_r_plan_buffer = cl_rsplfa_plan_buffer=>if_rsplfa_plan_buffer~get_instance( i_infoprov ).
l_r_plan_buffer->get_data( EXPORTING i_t_charsel = l_t_charsel
i_include_zero_records = rc_false
i_r_msg = l_r_msg
IMPORTING e_r_th_data = l_r_th_data
EXCEPTIONS OTHERS = 2 ).
Please take a look at the note. You do not need to implement the after_burn_selection exit, but you can find sample code how to read the planning buffer. Please give it a try.
Another solution would be to use the function module RSDRI_INFOPROV_READ. But you need to make shure that you first close the yellow request. This can be done using function module RSAPO_SWITCH_BATCH_TO_TRANS.
Hope this helps
Matthias Nutt
SAP Consulting Switzerland -
How do I transfer all data from my old internal hard drive to a new internal hard drive
How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one?
I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.Do you already have Time Machine making backups onto the 2TB drive? If so, after you get the internal drive replaced, boot up into the recovery partition (hold down ⌘R) and restore the latest Time Machine backup that you have onto the new internal drive.
I recommend always having two backups. I'd use SuperDuper to make a complete clone of your internal drive onto an external drive in addition to having the Time Machine backup.
Boot Camp is what is used to make partitions for Windows. How much space to allocate depends on how much space you expect Windows to use up based on how you plan to use it. -
Delta from Flexible Planning LIS InfoStructure
Hello experts,
Is it possible to have delta updates for a custom InfoStructure where the updates are from flexible planning?
It appears that delta postings are only generated from the regeneration of the standard update rules and the planning updates do not add values to the delta tables (SXXXBIW1 and SXXXBIW2).
Please confirm if it is possible to get delta from flexible planning and what setup is required if it's possible.
Thanks.I sent a customer message to SAP and here is the answer from them:
Unfortunately, the functionality you are looking for is not available in the current Plug-in/BW releases. Also, it does not appear that this functionality is currently being developed.
The flexible planning transactions do not utilize the LIS delta tables so the data will not be included in the delta updates.
You may consider extracting the data via a generic extractor to an ODS object or other data target. -
I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.
Install disk drive from old computer in an external enclosure.
Then copy the complete iTunes library from the disk drive to the disk drive in the new computer. -
Transfer of data from one iTunes account to another
My son has been using my iTunes account for games. Got him a 5th gen iPod touch. Can I transfer his data from my iTunes acct to a brand new iTunes account ? He is so ovewhelmed that he will lose his data .
Have you looked at the Family sharing program?
http://www.apple.com/ios/whats-new/family-sharing/ -
HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER
제품 : FIN_GL
작성날짜 : 2006-05-29
HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER
=============================================================
PURPOSE
특정 기간의 Balance 를 Account 별로 Transfer 하는 방법에 대해 알아 보도록 한다.
Explanation
GL 의 Mass Maintenance 기능을 이용하면 한 Account 에서 다른 Account 로 혹은 Multiple Account 에서 다른 하나의 Account 로 Balance 를 이동 시킬 수 있다.
1. GL Responsibility 에서 Other> Mass Maintenance 를 선택한다.
2. Move/Merge 작업을 위한 Request Name 과 Description을 입력한다.
3. Request Type 으로 Move 혹은 Merge 를 선택한다.
4. source-to-target account 를 위해 line number 를 입력한다.
5. LOV 에서 source Account 를 선택하여 입력한다.
모든 Account 는 enable 상태여야 한다.
6. target account 역시 LOV에서 선택하여 입력한다.
7. 지정한 작업을 수행 하기 전에 먼저 확인 작업을 할 수도 있다.
8. 작업한 내용을 저장한다.
9. Move/Merge request 를 수행한다.
Example
N/A
Reference Documents
Note. 146050.1 - How to Transfer Historical Data from One Account to AnotherFollow the directions here:
http://support.apple.com/kb/HT2109 -
How can I transfer binary data from a database to another database?
Hi all.
I want to transfer binary data from a MS SQL Server 2000 to anohter SQL Server 2000.
I created JDBC(table) to JDBC(stored procedure) scenario,and
I uploaded a JPG image file to the sender table using the java program I developed.
The JPG data was transfered to receiver,but the transfered data was broken.
I can't not open the file correctly.
Can XI transfer binary data using JDBC adapter?
The sender table structure is following.
<b>column (data type)</b>
id (int 4)
binary (binary 8000)
flag (int 4)
The receiver stored procedure parameter is following.
<b>parameter (data type)</b>
id (smallint)
binary (binary 8000)
flag (smallint)
Regards.
YuukiHi,
<i>Can XI transfer binary data using JDBC adapter?</i>
Ans: Yes
Supported JDBC Types
http://help.sap.com/saphelp_nw04s/helpdata/en/16/9dc9ac8bc72a48b80e639abaa2e497/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Mapping JDBC types to Java types
http://help.sap.com/saphelp_nw04/helpdata/en/7d/79dfa72d1049bc963f4f272bb1638e/frameset.htm
Regards,
Prateek -
Approaches to transfer changed data from a table to another table
Hello expert,
will you please show me all approaches to automatically detect and transfer changed data from a table to another table ? I don't need detail information, but a little comment for those approaches are more welcome.
Many Thanks,
Edited by: 843178 on 19-Dec-2011 2:04 PMYou will want to review information on replication and similar methods
In a nutshell:
Replication allowed data to exist at more than one site and take the Master / original table data and clone it at a different site
As tranporting all of the table data to a remote / clone site got more and more expensive we developed a method
to identify just the 'diffs' and only send those from the master to the clone which needed only the diffs to become a clone of the master table
This has many methods and options, but looking under key words such as
- distributed transations
- materialized views
- replication
... are a few categories that will get you started -
How do you validate transfer of data from legacy to SAP (Tcode: SQVI)?
Hello PP members:
I would like to know how to validate transfer of data from legacy to SAP
A friend of mine was telling it has to do with <u>SAP quick viewer(SQVI)</u> but could not able to much leads on it
I would be thankful if can provide insights into the subject
Thanks for your time,
Suren RSuren,
Yes, you could create queries in SAP with SQVI and get the data in SAP. But you need to be aware of all the relevant tables in SAP.
For information for creating queries use link:
http://help.sap.com/saphelp_47x200/helpdata/en/05/2b1df9209411d6b1d500508b6b8b11/frameset.htm
For getting the relevant tables the easiest way is :
1) Goto Se16.
2) Choose F4,
3) Click on SAP applications and drill down to the relevanttable.
Hope this is useful. If yes reward poins and close this thread.
Regards
Ram -
What connection options do I have in transfer of data from my macbook pro 13" to my iMac
What connection options do I have in transfer of data from my MacBook Pro 13" to my iMac?
If available, use a Firewire cable and put the origin in Target Disk Mode. That's how I rescued all my stuff, all 150GB of it, from my now dead Early '08 MBP to my current one.
With the new crop, I believe you can use the Thunderbolt ports as well.
Maybe you are looking for
-
LONG and stream is closed exception
If I create 2 result sets from 2 different statements under the same connection, I get a stream already closed exception when I go to retrieve the results from the 2nd RS if the RS has a LONG column in it. That is, I fetch the results from RS1 OK and
-
Hi I'm a novice on RMI and have been trying to learn the concept by copying the HelloWorld RMI example from the Java Tutorials to run on my Windows 98 PC. However, when I issued a DOS command: Java HelloImpl, the following error came up: " Access den
-
Long story short, I'm logged on to my daughters iMessage on my sons old iPod because of personal reasons so I was just wondering, will I receive her text messages? And will I be able to read the text messages she sends out? I may sound like the bad g
-
What happened to the Artwork tab in my movie file?
What happened to the Artwork tab in the Get Info section of my movie file? Does anyone know how to get it back?
-
Please help me to implement merge
Hi Experts,