Transfer partial asset values from completed asset to AUC/other asset

Hi All
Is it possible to transfer partial asset values from completed asset to AUC/other asset.
if yes please let me know how to do that?

I already checked T code ABUMN
But by using this code whole asset value is transferred ; I want to transfer only partial value.
eg. If i postasset value of Rs. 1000 to a machine & capitalise it. But after posting i found that actual asset value is only Rs. 600 and balance is of another asset.
then how can i transfer balance asset value of Rs. 400 to another asset card.

Similar Messages

  • One asset value to be transferred into different new asset codes

    Hello,
    I have one asset which has to be transferred into different new asset values. The instance as below:
    Old Asset: 1000
    Value: Rs. 10000
    Transferred into
    New asset code: 1100
    Value: Rs. 3000
    New Asset: 1200
    Value: Rs. 2000
    New Asset: 1300
    Value: Rs. 5000
    How to proceed? I have tried in ABUMN with partial Transfer but unable to get the result. Need help.
    JK

    Hi,
    This can be done through ABUMN only.
    You have to post 3 transactions individually to that old asset.
    For the first ABUMN transaction choode partial transfer and choose amount specification and enter 3000
    For the second ABUMN transaction choode partial transfer and choose amount specification and enter 2000
    For the last ABUMN transaction choode Complete retiremnet.(So the balance of 5000 will be transfered to the third new asset)
    Please check.
    Thanks,
    Srinu

  • Transfer of Vendor Balance from one profit center to other

    Hi All
    I need some help regarding Transfer of Vendor Balance from one profit Center to other profit cneter. I am in ECC 6.0 and activated document splitting.
    Regards
    Venkat

    Hi Kamal
    You are right. My requirment is to transfer Vendor balance in PC 1000 to PC 2000. If I post using 9KE0 it is not affecting in the respective vendor account. Since we are in ECC 6.0 with document split option we have to post the same transfer entry through any FI transaction only.
    Regards
    Venkat

  • Transfer vendors and customers from dummy profit center to other profit ctr

    Hi all
    No. of vendor /customer transactions are posted in dummy profit center-
    How to transfer from dummy profit center to other profit centers line itemwise or balanceswise
    thanks in advance
    joseph david

    Hi Joseph,
    Acturally at the end of certain period, payables/receivables will be updated with the profit center using the TCode: 1KEK.  the program searches for the profit center in opposite line item in each document and updates the payables/receivables line item with that profit center.
    But in your case you want to transfer the payables/receivables from dummy profit center to other profit center.  You can transfer the amount from one profit center to another profit center using the TCode: 9KE0.
    Hope this helps you...
    Regards,
    Sreekanth....

  • How to transfer all lightroom settings from one pc to an other?  Zsolt

    How to transfer all lightroom settings from one pc to an other?

    If you are talking about moving Lightroom and all your images to another PC, then this might help:
    http://www.lightroomqueen.com/how-move-lightroom-to-new-computer/
    If something different, please clarify what it is you are wanting to do.

  • How to use value from one data set in other data set SQL select.

    Hello all, i have one data set, and i need to get value from that data set into other data set. Something like '?' but without input. I will try to explain it with screenshots:

    If both tables come from the same data source, join the two tables in one data set rather than two as shown. If they are from different data sources, use a 'join data set'

  • Asset Transfor from one Company Code to Other Company Code

    Hi i want to know how to transfor total Assets from one company code to other company code
    Ex:
    1 - ABC
    2 - XYZ
    XYZ is my new Company code i have 100 assets in ABC Company Code, i am using that assets since last 3 years how can i transfor total Assets
    Please suggest me,
    Regards,
    Venkat

    hi
    through intercompany transfer it can be possible,first you have to configure two company codes OBYA T-Code,ther you have to give posting keys ,g/l account.
    I hope This will solve your problume.
    assign me points
    Regards
    Ramana

  • How to get return value from java and read by other application?

    i want to read return value from java and the other application read it.
    for example:
    public class test_return {
        test_return(){
        public int check(){
            return 1;
        public static void main(String args[]){
           new test_return().check();
    }from that class i make as jar file. How to read the return value (1) by other application?
    thx..

    If your installer is requiring some process it invokes to return a particular value on failure, then the installer is seriously broken. There are a bazillion commands your installer could invoke, and any of them could fail, which in turn could invalidate the entire install process, and any of them could return any value on failure. The only value that's consistent (in my experience) is that zero means success and non-zero means failure, with specific non-zero values being different in different programs.
    About the only control you have over the JVM's exit code is that if your main method completes without throwing an exception, the JVM will have an exit code of 0, and if main throws an exception (either explicitly or by not catching one thrown from below), it will be non-zero. I'm not even sure if that's guaranteed, but I would guess that's the case.
    EDIT: I'm kind of full of crap here. If you're writing the Java code, you can call System.exit(whatever). But nonetheless, if your installer requires certain exit codes from any app--java or otherwise--you have a problem.
    Edited by: jverd on Oct 29, 2009 1:27 AM

  • Copy values from one Parent node to other Parent Node

    Hi all,
    I have a 2 Parent node each having 3 child nodes. I want to copy the values of all the attributes of all the child nodes of one Parent Node to corresponding other node.
    Both the Parent Nodes as well as their Child Nodes have different name but their attributes have same name.For ex:
    Parent Node -A
    Child Nodes - a, b,c
    Child Node "a" has attributes "x" and "y"
    Parent Node -B
    Child Nodes - d,e,f
    Child Node "d" has attributes "x" and "y" .
    Now I want to copy the values od attributes "x" and "y" from one Parent Node to other Parent node.
    Please help me out.
    Helpful answers will be rewarded.
    Thanxs in advance...

    Hi Jin,
    To use copy service API, u need to satisfy 2 condition for the attributes of source node and target node:
    1. The name of the attribute should be same (including the case of the name)- Abc is different from ABC
    2. Type of the attribute should also be the same.
    copy elements works for copying values from Model node to context and does not work vice-versa. To enable the copying of context node to model node, use copycorresponding API.
    Eg:
    int contextNodeSize = wdContext().node<contextNodeName>().size();
    for(int i = 0; i < contextNodeSize; i++)
         <modelNodeName> modelObject = new <modelNodeName>();
         <contextNodeName>Element contextObject = wdContext().node<contextNodeName>().get<contextNodeName>ElementAt(i);
         WDCopyService.copyCorresponding(contextObject, modelObject);
    This will copy the values from Context Node to Model Node.
    Hope this helps you.
    Regards,
    Poojith MV

  • How to use time values from graph or chart for other calculations

    iam generating an ultrasonic signal of frequency 500k. In the equation i need the values of time axis of the graph or chart for calculationg the envelope of the graph. please help me how to use the x-axis time values.I have tried by writing in spread sheeet or by using arrays. here iam not able to get only 1 dim time values.
    AshwiniP

    Use a property node

  • Transferring values from G/L accounts into Intagible Assets

    Hi all,
          We have an issue. We have created new asset classes for intangible assets. Now we want to create assets for intangible assets and transfer the balances from already existing intangible accounts to the newly created assets. CAn anyone tell me how we cando this.
    Thanks,
    Kris

    hi Mohan,
    so simply use transaction f-91
    so that you can clear your G/L-acc.
    Andreas
    pls reward useful answers
    thank you

  • Transfer of characteristics values from material variant to its subordinate

    Gurus
    Need your Expert opinion on Variant configuration
    We are using Multi level Material Variants and our bussiness process demands for configuration of These Material variants in Transaction MD81 and during creation of Sales order .These configuration will not affetc the BOM explosion but will only be passed to the The lower level components (Which are again theMulti level Configuriable  Material variants ) as manufacturing instructions .To Enable these Flow of Characterisitcs we have Applied a Note which allows the Multi level Configuration of Material Variants and Pass this Values to lower Level and the characteristics value flow is visible as well for lower level from CU50 ,but when i create the requirement through  CIR or sales order and Configure the Material Variants  and Generate the Procurement Proposals to fullfill these requirements (MD02) in the form of Planned order  we are unable to pass one the Characterisitcs values to planned orders of  lower level Components of Material Variants .These characterisitc values are Used as Manufacturing Instructions and should be passed on to the Lower level of Material Variants through the use of dependencies in Configuration profile .but the problem is it works in CU50 and does not flow in planned orders , does any body have a solution for this ?
    Thanks In Advance
    awaiting reply
    Milind

    Hi Milind,
    I check that you implement a Note which allows the Multi level Configuration of Material Variants? is it sap note? mind to share the number.
    I ever faced this problems to before but fortunately the case in simpler so i just create another variant and maintain the component for the variant. For example : characteristic color. I create variant with color red black etc. For variant red, maintain component red. For variant black maintain component black, so on. Is it possible for your case?
    Regards,
    Arman

  • How ?? Pass value from one procedure to the others.

    I'm thank you everyone visited my Thread.
    This is my abbreviate program. I've a procedure "proc_check_item" that have many conditions and "proc_item_number" get value (v_stmt)from "proc_check_item".
    -- proc_check_item --
    v_stmt varchar2(100);
    If conditions1 then
    v_stmt := 'and item_number between 1000 and 2000';
    package.proc_item_number(v_stmt);
    elsif conditions2 then
    v_stmt := 'and item_number >= 1000';
    package.proc_item_number(v_stmt);
    elsif
    v_stmt := 'and item_number <= 2000';
    package.proc_item_number(v_stmt);
    end if;
    -- proc_item_number(p_stmt in Varchar2) --
    cursor cur_01 is
    select item_01, ....
    from table_a
    where ...
    and ...
    &v_stmt <--- this point!!!
    How can i do to passed v_stmt from
    "proc_check_item" to "proc_item_number".
    I'm used &,||, ... its does not work pls. help me
    ---- If its right it should be -----
    cursor cur_01 is
    select item_01, ....
    from table_a
    where ...
    and ...
    and item_number between 1000 and 2000
    cursor cur_01 is
    select item_01, ....
    from table_a
    where ...
    and ...
    and item_number >= 1000
    It's look like at REPORT that i can used 'place holder parameter' to support this query but in this procedure !!
    How can i do..
    Thank you for your kindness ...
    Message was edited by:
    Anonymous
    Message was edited by:
    Anonymous

    Something like this:
    -- proc_item_number(p_stmt in Varchar2) --
    cursor cur_01(v_stmnt varchar2) is
    select item_01, ....
    from table_a
    where ...
    and v_stmt = ...
    open cur_01(p_stmt)

  • How to read the value from one context node in other in the same view.

    Hi,
    I am working on enhanced component ICCMP_BP_CP/BuPaContactPersonCreate ,  i need to read the partner_guid from Customer context node in  contactpersonaddress context node.
    Could you please guid me how to achieve this? if possible, please explain me with some sample code.
    i am trying this code in GET_FAXFAX method of contactpersonaddress-faxfax, but it is throwing me the type cast exception.
    data: lr_entity type ref to cl_crm_bol_entity.
    data: lv_test type string.
    lr_entity ?= collection_wrapper->get_current( ).
    lr_entity = lr_entity->get_related_entity( 'BuilContactPersonAddressRel' ).
    Thanks in advance.
    Regards,
    Kamesh Bathla
    Edited by: Kamesh Bathla on Jun 25, 2009 7:46 PM

    problem solved by writing the code in context node class CREATE_CONTPERSADDRESSVALNODE method
      coll_wrapper = customer->get_collection_wrapper( ).
      TRY.
          entity ?= coll_wrapper->get_current( ).
        CATCH cx_sy_move_cast_error.
      ENDTRY.
      IF entity IS BOUND.
    CONTPERSADDRESSVALNODE->on_new_focus( focus_bo = entity ).
        DATA: lr_collection TYPE REF TO cl_crm_bol_entity,
              lv_fax TYPE string,
              lv_fax_ext TYPE string,
              lv_tel TYPE string,
              lv_tel_ext TYPE string,
              entity_addr TYPE REF TO if_bol_bo_property_access, "#EC *
              coll_wrapper1 TYPE REF TO cl_bsp_wd_collection_wrapper.
         lr_parrent type
        lr_collection = entity->get_related_entity( 'BuilStandardAddressRel' )."'BuilContactPersonAddressRel' ).
        IF lr_collection IS BOUND.
          coll_wrapper1 = contpersaddressvalnode->get_collection_wrapper( ).
          TRY.
              entity_addr ?= coll_wrapper1->get_current( ).
            CATCH cx_sy_move_cast_error.
          ENDTRY.
    getting fax number
          CALL METHOD lr_collection->if_bol_bo_property_access~get_property_as_value
            EXPORTING
              iv_attr_name = 'FAXFAX'
            IMPORTING
              ev_result    = lv_fax.
    ***setting fax number
          CALL METHOD entity_addr->set_property
            EXPORTING
              iv_attr_name = 'FAXFAX'
              iv_value     = lv_fax.

  • Passing values from one .mxml file to other

    Hi all,
    I am a flex newbie, and I have to admit I like flex very much. I have the following question:
    I am trying to make a really simple example, where I have a simple mxml application containing some radiobuttons. the radiobuttons simply change the color of several graphic shapes (circles,etc) on click. I am trying to add a new state (represented as a new mxml module) that contains different shapes. Still, I want to pass the value of the originally created radiobuttons to my new state (aka interface view) so that the new shapes inherit their color according to the radiobuttons value (selected:true || false). I am using flex 4 and in order to load my new interface (module) I use the SWFLoader.
    Any help would be greatly appreciated. Also, if my (above) description doesn't make sense, I can easily paste my code (it's just a few lines anyway).
    Thank you.

    I'm not the most experienced flex user, but in other programming languages, each class is usually kept separate and can interact with each other using public functions. You might need to create a function in class B called setColorOfObject(object:object, color:color). Then in class B you can use those values to manipulate objects contained within class B. You would need to call the function contained in class B using class A.
    ~dan

Maybe you are looking for