Transformer asus t100/windows 8/ how to get ade to work on it and retrieve ebooks off old pc?

ade is not the greeastest piece of work ever, but I got used to it on my laptop, storing ebboks I bought  there happy with windows xp!
new asus transformer comes along and I want to use this as my e reader, but altho I seem to have downloaded ade on to it, how on earth do I find my ebooks ? the library on laptop shows them all there, all bought post adobe sign up, and all the pdf dox i use off the pc/laptop. but nothing on the  new tablet.
I sort of thought that i would be able to transfer content across, but how to do this is the question.
my old sony ereader causes the tablet to throw a fit....

Hi,
Please use the following package:
   http://ftp.hp.com/pub/softlib/software12/COL40120/bi-108858-3/OJ8600_1315.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Parallels + Windows 7: how to get registration to work and stay working

    So I recently replaced my hard drive and I guess I didn't include my Boot Camp partition in my Time Machine backup (oh well, I didn't actually have anything saved in it fortunately.) So the upshot is I have to start fresh with Boot Camp, Parallels 5 and Windows 7 (and OS X 10.6.6.)
    I want to have my Boot Camp partition be accessible from Parallels which is supposedly possible but I never got my last install to actually function in terms of Windows registration. I could get it to work fine in Boot Camp but if I opened it in Parallels it would request registration again but then the registration wouldn't stay registered and the registration would no longer be valid in the Boot Camp mode either.
    What I'm looking for is some step by step info on how to make this work right from the start. Or alternatively tricks or tips to get Windows to play nice in terms of the two ways of accessing it.
    PLEASE don't give me a link to the Parallels forum unless it's something specific that will help. I am well aware of the address of that forum (and it's pretty dead over there.)
    Thanks!

    Install Windows using Boot Camp Assistant. Register it. Install Parallels and configure it to use the Boot Camp installation of Windows as the guest operation system. Register Windows in Parallels. If the online registration does not work use the telephone registration. It is an automated system that will give you a second registration number. If the telephone system does not work for you call the registration assistance number. They will give you a new key for your Parallels Windows.
    The reason you need to register twice is because Windows uses your hardware configuration to identify what computer it is installed on. When you use Windows in Parallels, Parallels creates virtual hardware that appears different than the hardware used during the Boot Camp installation. So Windows thinks it is installed on two different computers. Once the registration is performed with two different keys (free of course) then you won't have any problems.
    You will need to go through this double registration for Microsoft Office as well if you install it.

  • Satellite L500 - How to get FN keys working on Windows 7 64bit?

    Hi
    I needed to reinstall Windows 7 on a Satellite L500 but I can't get the FN keys to work. Would anyone here be able to give any ideas on how to get this to work?
    cas

    Hello
    You need Toshiba Value Added Package and Flash Cards Support Utility. Both you can download here:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Use also the forum search, this question was asked 100 times before.

  • I have purchased itunes match but the cloud will not load on my ipad 4.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

    i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

    On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
    On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

  • Mozilla Fire Fox 4, Bookmark Toolbar, how to get it to work?

    Mozilla Fire Fox 4, Bookmark Toolbar, how to get it to work?

    Hi,
    the bookmarks toolbar is blank, it can be turned on or off, but the bookmarks, which are in the toolbar folder when I view all my bookmarks, don't appear in the toolbar. This is when using windows xp. When using windows 7 at home, it works fine. thanks.

  • Can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

    can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

    Hello mate!
    Are you sure u have the option on the up-right side of the arrange window checked to x-fade?

  • How to get the values of all elements and sub elements from  following xml

    how to get the values of all elements and sub elements from following xml...
    <?xml version="1.0" encoding="UTF-8" ?>
    <List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
    <TransactionID>TransactionID</TransactionID>
    <Match>
    <Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
    <List_Matched_Field>
    <FSFM_Matches>
    <NUMBER>NUMBER</NUMBER>
    <TERROR>TERROR</TERROR>
    <TU>TU</TU>
    <NAMEU>NAMEU</NAMEU>
    <DESCRIPT>DESCRIPT</DESCRIPT>
    <KODCR>KODCR</KODCR>
    <KODCN>KODCN</KODCN>
    <AMR>AMR</AMR>
    <ADDRESS>ADDRESS</ADDRESS>
    <SD>SD</SD>
    <RG>RG</RG>
    <ND>ND</ND>
    <VD>VD</VD>
    <GR>GR</GR>
    <YR>YR</YR>
    <MR>MR</MR>
    <CB_DATE>CB_DATE</CB_DATE>
    <CE_DATE>CE_DATE</CE_DATE>
    <DIRECTOR>DIRECTOR</DIRECTOR>
    <FOUNDER>FOUNDER</FOUNDER>
    <TERRTYPE>TERRTYPE</TERRTYPE>
    </FSFM_Matches>
    <OfacMatchDetails>
    <UID>UID</UID>
    <TITLE>TITLE</TITLE>
    <SDNTYPE>SDNTYPE</SDNTYPE>
    <REMARKS>REMARKS</REMARKS>
    <ID_UID>ID_UID</ID_UID>
    <IDTYPE>IDTYPE</IDTYPE>
    <IDNUMBER>IDNUMBER</IDNUMBER>
    <IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
    <ISSUEDATE>ISSUEDATE</ISSUEDATE>
    <EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
    <ADDRESS1>ADDRESS1</ADDRESS1>
    <ADDRESS2>ADDRESS2</ADDRESS2>
    <ADDRESS3>ADDRESS3</ADDRESS3>
    <CITY>CITY</CITY>
    <STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
    <POSTALCODE>POSTALCODE</POSTALCODE>
    <COUNTRY>COUNTRY</COUNTRY>
    </OfacMatchDetails>
    </List_Matched_Field>
    </Match>
    </List_AML_Finacle>

    avoid multi post
    http://forum.java.sun.com/thread.jspa?threadID=5249519

  • When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine.  Any ideas on how to get 5.0 working?

    When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine both placed.  Any ideas on how to get 5.0 working?  I thought 5.0Ghz was supposed to have a wider range.  Do I need to change a setting on the Macbook Pro?
    Thanks, W

    I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
    The upside is that the 5 GHz signal will allow faster speeds.
    The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
    In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
    If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

  • ITunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

    iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

    It is likely a hardware failure
    http://support.apple.com/kb/TS3694?viewlocale=en_US#error1

  • How to get the data of Open Opportunities and Closed Opportunities

    Hi Guys,
      i'm studying about Sales Opportunities in SAP BusinessOne.
    i'm able to get the data about Sales Opportunities(i enterd), Opportunities Report and Lost Opportunities.
    But i dont know how to get information about Open Opportunities Reports and Closed Opportunitiesn Reports.i'm unable to find even their names of tables.
    plz send a reply.................
       with regards,
    santh

    Thanq Alexey for ur Helpful Answer,
       i'm aware about execution of a query in the Query Analyzer of SQL Server.but i dont know how to move to ShowDebugInformation Menu.
       can i find it in  the SAP Business One Tool. or do i need
    to check any data base help given by B1(Ex:- REFDB2004).
        plz give answer for  this also............
      with regards,
    santh

  • I have a new MacAir and don't know how to get info from my USB stick and my SD photo card.  Can anyone help me please?

    I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card.  Can anyone help, please?

    Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
    Matt

  • How do I get reminders to work between ical and google calendar

    I have searched and searched, read dozens of posts, and still have found nothing that shows how to get reminders to work in ical. One post said to disable all event reminders in the google interface-did not make any difference; setting them up in google-did not work; etc etc
    Specifically, I am on a macbook pro, snow leopard, ical 4.0.4; my wife is on the same system, but using an iMac.
    since snow leopard does not support the cloud, and mobilme is gone, we were 'forced' to use google calendar to sync events between our two computers; that part seems to work fine; most of the time.
    But neither of us can get a reminder to pop up in ical, when the event is one that goes to google; if the event is one that is "on my mac", then those kind of event reminders do work.
    this is not about syncing reminders; it is about me tring to make a medical appt event remind me a few hours before, so I don't forget it, like happened last week!!
    Mainly I am expecting anyone that responds to this post to say, yes you are right, there is no way to get a 'caldav' event reminder to work anymore.
    If anyone says "I found a way..." I will be knocked over :-)  (but overjoyed); I am happy to use terminal, plist editor, or anything else, if someone can fix this.

    can anyone help with this, even if just to confirm that there is no fix?

  • How to get my new in-car entertainment system to recognise my old 20g iPod by usb connection

    how to get my new in-car entertainment system to recognise my old 20g ipod by usb

    Hi albri51!
    I have an article for you that can help you with that question. The article is about troubleshooting car stereo connections, and can be found right here:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Hope this helps. Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

    I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
    I have sticky keys enabled.
    When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
    The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
    When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
    If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
    Has anyone figured out how to get speech recognition working with sticky keys enabled?
    Or a way to get an individual key shortcut to start on the first press and process it on the second?
    Or a way to get key combinations to work, as specified by the help:
    Dictation On and Off
    To use Dictation, click On.
    When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
    Shortcut
    By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
    To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

    I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

  • How to get classification for a given material and material type in MM

    Hello Friends,
    One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
    He is looking for probable table and table fields to Select from.
    I would appreciate seriously any help in this regard.
    ~Yours Sincerely

    Hi
    Below given the flow and table details for a given class and class type.
    - Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
    - Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
    - Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
    - Table CABNT --> This table contains the "Description" for the internal character numbers.
    - award points if this is ok

Maybe you are looking for

  • Support profile no longer working?

    Seems to me there used to be a list of my products associated with my support user account, but now when I go to supportprofile.apple.com I get this: We are sorry. We're sorry, but we are unable to complete your request at this time. Please try again

  • IPod will not update automatically

    After installing iTunes 7.0 I find that my iPod will not sync any more. There is no automatic updating. iTunes recognizes the iPod and says it's updating but nothing updates. It has sat for hours updating and nothing comes across. I've installed and

  • MM-SUS Functionality in EBP-SUS

    Dear SRM Gurus, We are working on SRM 7.0, Extended Classic Scenario.  The SUS Scenario that we will set-up is EBP-SUS.  However, there are functionalities in MM-SUS that the client requires as well.  How do we set-up the following: 1) whenever Goods

  • Password for PDF Generated from WEBI

    Dear Folks, I want to give password for PDFs generated from WEBI so that when a person receives scheduled pdf report in his mail,he gives a password to open it.pls let me know how that can be acheived?

  • CPA Cache Monitoring is not working in PCK

    Hi all, i had done a scenario Mail to File in PCK .When i checked the flow of messages in Message Monitoring . Receiver Party and Receiver Services are missing. When i try to refresh CPA cache using URL: http://<host>:<port>/CPACache/refresh?mode=del