Transportable tablespace errors

Hi experts
Could you please tell me how to resolve this?
connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "ABCD"."SYS_IMPORT_TRANSPORTABLE_01" successfully loaded/unloaded
Starting "XYZ"."SYS_IMPORT_TRANSPORTABLE_01": DDEEF/******** directory = tt_import_dir dumpfile = dev_tt.dmp transport_datafiles = /apps/oracle/oradata/dev/datafile1_data-01.dbf, /apps/oracle/oradata/dev/datafile2_data-01.dbf, /apps/oracle/oradata/dev/datafile3_data-01.dbf remap_schema=dev_xxx:xxx14 remap_schema=dev_yyyy:yyyyy14 remap_schema=dev_zzzz:zzzz14 remap_tablespace=dev_zzzzz_data:zzzz14_data remap_tablespace=dev_yyyyy_data:yyyyt14_data remap_tablespace=dev_zzzzz_data:zzzzz14_data
Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
ORA-39123: Data Pump transportable tablespace job aborted
ORA-19721: Cannot find datafile with absolute file number 11 in tablespace REPORT14_DATA
Job "ABDC"."SYS_IMPORT_TRANSPORTABLE_01" stopped due to fatal error at 10:48:35
thanks
seema

Seema,
This is what is mentioned about the error,
>
ORA-19721:     Cannot find datafile with absolute file number string in tablespace string
Cause:     Can not find one of the datafile that should be in the Pluggable Set.
Action:     Make sure all datafiles are specified via import command line option or parameter files. >
So it seems the exported dump is not complete. Retry by taking export again and than try importing it .
HTH
Aman....

Similar Messages

  • Transportable tablespace error

    Oracle version 9.2.0.8
    OS - Windows XP
    I am doing tablespace transport from one database to another database.
    My export went good but while importing I am getting some errors
    Not only that but I have to restart instance every time I try import
    C:\>exp userid='sys/**** as sysdba' transport_tablespace=y tablespaces=xyz5 file='C:\u03\expor\xyz5.dmp' log='C:\u03\expor\xyz.log'
    Export: Release 9.2.0.8.0 - Production on Sat Mar 22 22:50:20 2008
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to: Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.8.0 - Production
    Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    Note: table data (rows) will not be exported
    About to export transportable tablespace metadata...
    For tablespace EXAMPLE3 ...
    . exporting cluster definitions
    . exporting table definitions
    . . exporting table
    . exporting referential integrity constraints
    . exporting triggers
    . end transportable tablespace metadata export
    Export terminated successfully without warnings.
    C:\>imp USERID='sys/** AS SYSDBA' TRANSPORT_TABLESPACE=y DATAFILES='C:\oracle\oradata\spri\xyz5.DBF' TABLESPACES=xyz5 FILE='C:\u03\expor\xyz5.dmp'
    Import: Release 9.2.0.8.0 - Production on Sat Mar 22 23:21:58 2008
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to: Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.8.0 - Production
    Export file created by EXPORT:V09.02.00 via conventional path
    About to import transportable tablespace(s) metadata...
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    . importing SYS's objects into SYS
    IMP-00017: following statement failed with ORACLE error 3113:
    "BEGIN sys.dbms_plugts.beginImport ('9.2.0.8.0',178,'2000',NULL,'NULL',252"
    "78,7151,1); END;"
    IMP-00003: ORACLE error 3113 encountered
    ORA-03113: end-of-file on communication channel
    IMP-00000: Import terminated unsuccessfully

    How the error of exp and imp will come in alert.log file?
    It will come in the log file we specified in parameter. I already posted that information.

  • Error while using Transport Tablespace

    Hi,
    I am running into the below errors when I do the transport tablespace in 11g using the OEM --> Data Movement --> Transport Tablespace.
    RMAN-03009: failure of conversion at source command on ORA_DISK_1 channel at 04/22/2008 08:28:32
    RMAN-20038: must specify FORMAT for CONVERT command
    When I search for the RMAN-03009 in OTN,Metalink,google , I get some unrelated hits with different message and not the "Failure of Conversion..." message.. for this message code.
    Please advice if you have had the same issue and resolved the same.
    Thanks
    Sheik

    From 11g Error Messages:
    RMAN-20038: must specify FORMAT for CONVERT command
    Cause: No FORMAT was specified when using CONVERT command.
    Action: Resubmit the command using FORMAT clause.

  • Error ORA-39125 and ORA-04063 during export for transportable tablespace

    I'm using the Oracle Enterprise Manager (browser is IE) to create a tablespace transport file. Maintenance...Transport Tablespaces uses the wizard to walk me through each step. The job gets created and submitted.
    The 'Prepare' and 'Convert Datafile(s)' job steps complete successfully. The Export step fails with the following error. Can anyone shed some light on this for me?
    Thank you in advance!
    =======================================================
    Output Log
    Export: Release 10.2.0.2.0 - Production on Sunday, 03 September, 2006 19:31:34
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Username:
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    Starting "SYS"."GENERATETTS000024": SYS/******** AS SYSDBA dumpfile=EXPDAT_GENERATETTS000024.DMP directory=EM_TTS_DIR_OBJECT transport_tablespaces=SIEBEL job_name=GENERATETTS000024 logfile=EXPDAT.LOG
    Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
    Processing object type TRANSPORTABLE_EXPORT/TABLE
    Processing object type TRANSPORTABLE_EXPORT/TABLE_STATISTICS
    ORA-39125: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA while calling DBMS_METADATA.FETCH_XML_CLOB [TABLE_STATISTICS]
    ORA-04063: view "SYS.KU$_IOTABLE_VIEW" has errors
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "SYS.KUPW$WORKER", line 6241
    ----- PL/SQL Call Stack -----
    object line object
    handle number name
    2CF48130 14916 package body SYS.KUPW$WORKER
    2CF48130 6300 package body SYS.KUPW$WORKER
    2CF48130 2340 package body SYS.KUPW$WORKER
    2CF48130 6861 package body SYS.KUPW$WORKER
    2CF48130 1262 package body SYS.KUPW$WORKER
    2CF0850C 2 anonymous block
    Job "SYS"."GENERATETTS000024" stopped due to fatal error at 19:31:44

    More information:
    Using SQL Developer, I checked the view SYS.KU$_IOTABLE_VIEW referred to in the error message, and it does indeed report a problem with that view. The following code is the definition of that view. I have no idea what it's supposed to be doing, because it was part of the default installation. I certainly didn't write it. I did, however, execute the 'Test Syntax' button (on the Edit View screen), and the result was this error message:
    =======================================================
    The SQL syntax is valid, however the query is invalid or uses functionality that is not supported.
    Unknown error(s) parsing SQL: oracle.javatools.parser.plsql.syntax.ParserException: Unexpected token
    =======================================================
    The SQL for the view looks like this:
    REM SYS KU$_IOTABLE_VIEW
    CREATE OR REPLACE FORCE VIEW "SYS"."KU$_IOTABLE_VIEW" OF "SYS"."KU$_IOTABLE_T"
    WITH OBJECT IDENTIFIER (obj_num) AS
    select '2','3',
    t.obj#,
    value(o),
    -- if this is a secondary table, get base obj and ancestor obj
    decode(bitand(o.flags, 16), 16,
    (select value(oo) from ku$_schemaobj_view oo, secobj$ s
    where o.obj_num=s.secobj#
    and oo.obj_num=s.obj#),
    null),
    decode(bitand(o.flags, 16), 16,
    (select value(oo) from ku$_schemaobj_view oo, ind$ i, secobj$ s
    where o.obj_num=s.secobj#
    and i.obj#=s.obj#
    and oo.obj_num=i.bo#),
    null),
    (select value(s) from ku$_storage_view s
    where i.file# = s.file_num
    and i.block# = s.block_num
    and i.ts# = s.ts_num),
    ts.name, ts.blocksize,
    i.dataobj#, t.bobj#, t.tab#, t.cols,
    t.clucols, i.pctfree$, i.initrans, i.maxtrans,
    mod(i.pctthres$,256), i.spare2, t.flags,
    t.audit$, t.rowcnt, t.blkcnt, t.empcnt, t.avgspc, t.chncnt, t.avgrln,
    t.avgspc_flb, t.flbcnt, t.analyzetime, t.samplesize, t.degree,
    t.instances, t.intcols, t.kernelcols, t.property, 'N', t.trigflag,
    t.spare1, t.spare2, t.spare3, t.spare4, t.spare5, t.spare6,
    decode(bitand(t.trigflag, 65536), 65536,
    (select e.encalg from sys.enc$ e where e.obj#=t.obj#),
    null),
    decode(bitand(t.trigflag, 65536), 65536,
    (select e.intalg from sys.enc$ e where e.obj#=t.obj#),
    null),
    (select c.name from col$ c
    where c.obj# = t.obj#
    and c.col# = i.trunccnt and i.trunccnt != 0
    and bitand(c.property,1)=0),
    cast( multiset(select * from ku$_column_view c
    where c.obj_num = t.obj#
    order by c.col_num, c.intcol_num
    ) as ku$_column_list_t
    (select value(nt) from ku$_nt_parent_view nt
    where nt.obj_num = t.obj#),
    cast( multiset(select * from ku$_constraint0_view con
    where con.obj_num = t.obj#
    and con.contype not in (7,11)
    ) as ku$_constraint0_list_t
    cast( multiset(select * from ku$_constraint1_view con
    where con.obj_num = t.obj#
    ) as ku$_constraint1_list_t
    cast( multiset(select * from ku$_constraint2_view con
    where con.obj_num = t.obj#
    ) as ku$_constraint2_list_t
    cast( multiset(select * from ku$_pkref_constraint_view con
    where con.obj_num = t.obj#
    ) as ku$_pkref_constraint_list_t
    (select value(ov) from ku$_ov_table_view ov
    where ov.bobj_num = t.obj#
    and bitand(t.property, 128) = 128), -- IOT has overflow
    (select value(etv) from ku$_exttab_view etv
    where etv.obj_num = o.obj_num)
    from ku$_schemaobj_view o, tab$ t, ind$ i, ts$ ts
    where t.obj# = o.obj_num
    and t.pctused$ = i.obj# -- For IOTs, pctused has index obj#
    and bitand(t.property, 32+64+512) = 64 -- IOT but not overflow
    -- or partitioned (32)
    and i.ts# = ts.ts#
    AND (SYS_CONTEXT('USERENV','CURRENT_USERID') IN (o.owner_num, 0) OR
    EXISTS ( SELECT * FROM session_roles
    WHERE role='SELECT_CATALOG_ROLE' ));
    GRANT SELECT ON "SYS"."KU$_IOTABLE_VIEW" TO PUBLIC;

  • Error in Transport Tablespace from linux to windows

    I am testing the cross-Platform Transport Tablespace. As per the oracle, we can transport tablespace from linux to windows without conversion because both are using same endian (Little).
    But i am fail to do Transport Tablespace from Linux to Windows.
    I am performing Transport Tablespace process as following:
    from Source Oracle Database server(red had linux as 4 32-bit oracle version:10.2)
    Sql> alter tablespace TEST read only;
    $ expdp system/pass dumpfile=test.dmp directory=export_dir transport_tablespaces=test transport_full_check=y
    after this i am coping test.dmp and data file (test.dbf) to the target machine (ms windows xp 32-bit with oracle 10.1) .
    on Target Machine (with Ms windows xp os) here i am giving the following command:
    impdp system dumpfile=test.dmp directory=exp_dir transport_datafiles=/exp_dir/test.dbf
    but it is giving following error:
    ora-39001: invalid argument value
    ora-39000: bad dump file specification
    ora-31619: invalid dump file "c:\pks\1103.dmp"
    what may by ...
    Prabhaker

    now for version compatibility i am inclusding version option with expdp
    edpdp scott dumpfile=1103.dmp directory=pks transport_tablespaces=prabhu version=10.1.0.2.0
    but now it is giving following error:
    Import: Release 10.1.0.2.0 - Production on Saturday, 11 March, 2006 19:07
    Copyright (c) 2003, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    Master table "SCOTT"."SYS_IMPORT_TRANSPORTABLE_01" successfully loaded/unloaded
    Starting "SCOTT"."SYS_IMPORT_TRANSPORTABLE_01": scott/******** DUMPFILE=1103.DMP DIRECTORY=PKS TRANSPORT_DATAFILES=C:\PKS\PRABHU version=10.1.0
    Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
    ORA-39123: Data Pump transportable tablespace job aborted
    ORA-06550: line 2, column 2:
    PLS-00306: wrong number or types of arguments in call to 'BEGINIMPORT'
    ORA-06550: line 2, column 2:
    PL/SQL: Statement ignored
    Job "SCOTT"."SYS_IMPORT_TRANSPORTABLE_01" stopped due to fatal error at 19:07
    regards
    Prabhu

  • Transport Tablespace export error.

    Hello to All.
    Oracle Version : 9.2.0.1
    Operating System : Windows XP
    Sir.
    On testing to export a transportable tables space I got the following errors. I am unable to understand the cause of errors. Please guide
    The command fired and errors are :
    Before this I have made the tablespace users read only by this command :;
    sql> alter tablespace users read only;
    Tablespace Altered
    C:\Documents and Settings\admin>exp \"sys/oracle as sysdba\" transport_tablespace=Y tablespaces=users log=ts_users.log
    Export: Release 9.2.0.1.0 - Production on Fri Oct 3 20:23:09 2008
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.1.0 - Production
    Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    Note: table data (rows) will not be exported
    About to export transportable tablespace metadata...
    EXP-00008: ORACLE error 1001 encountered
    ORA-01001: invalid cursor
    ORA-06512: at "SYS.DBMS_SYS_SQL", line 819
    ORA-06512: at "SYS.DBMS_SQL", line 19
    ORA-06512: at "SYS.DBMS_TTS", line 774
    ORA-25153: Temporary Tablespace is Empty
    ORA-06512: at "SYS.DBMS_PLUGTS", line 1093
    ORA-06512: at line 1
    EXP-00000: Export terminated unsuccessfully
    thanks and regards
    Neeraj
    Edited by: ora-boy on Oct 3, 2008 8:05 AM
    Edited by: ora-boy on Oct 3, 2008 8:06 AM

    EXTREMELY sorry for this type of silly blunder.
    now the result is
    PL/SQL procedure successfully completed.
    SQL> SELECT * FROM TRANSPORT_SET_VIOLATIONS;
    VIOLATIONS
    Default Partition (Table) Tablespace SYSTEM for EMP1 not contained in transportable set
    Default Partition (Table) Tablespace SYSTEM for EMP1 not contained in transportable set
    Default Partition (Table) Tablespace SYSTEM for EMP1 not contained in transportable set
    Default Partition (Table) Tablespace USERS for EMP1 not contained in transportable set
    Default Partition (Table) Tablespace USERS for EMP1 not contained in transportable set
    Default Partition (Table) Tablespace USERS for EMP1 not contained in transportable set
    6 rows selected.
    but I am unable to understand this.
    thanks

  • Transport tablespace related problem

    Hi all,
    I have a problem i want to export tablespaces as i have to migrate my db from oracle 9.2 to oracle 10.2 from win to RHEL4.......but i am getting an error ,pls suggest me for the same....
    SQL> @G:\oracle\ora92\rdbms\admin\dbmsplts.sql;
    Package created.
    Package created.
    Grant succeeded.
    Package created.
    Grant succeeded.
    drop view sys.transport_set_violations
    ERROR at line 1:
    ORA-00942: table or view does not exist
    PL/SQL procedure successfully completed.
    drop table sys.transts_error$
    ERROR at line 1:
    ORA-00942: table or view does not exist
    Package created.
    SQL> exec sys.dbms_tts.transport_set_check('SRO',true);
    BEGIN sys.dbms_tts.transport_set_check('SRO',true); END;
    ERROR at line 1:
    ORA-04068: existing state of packages has been discarded
    ORA-04063: package body "SYS.DBMS_TTS" has errors
    ORA-06508: PL/SQL: could not find program unit being called
    ORA-06512: at line 1
    SQL> desc dbms_tts
    PROCEDURE DOWNGRADE
    FUNCTION ISSELFCONTAINED RETURNS BOOLEAN
    Argument Name                  Type                    In/Out Default?
    TS_LIST                        CLOB                    IN
    INCL_CONSTRAINTS               BOOLEAN                 IN
    FULL_CHECK                     BOOLEAN                 IN
    PROCEDURE KFP_CKCMP
    PROCEDURE TRANSPORT_SET_CHECK
    Argument Name                  Type                    In/Out Default?
    TS_LIST                        CLOB                    IN
    INCL_CONSTRAINTS               BOOLEAN                 IN     DEFAULT
    FULL_CHECK                     BOOLEAN                 IN     DEFAULT
    SQL> exec dbms_tts.transport_set_check('SRO',true);
    BEGIN dbms_tts.transport_set_check('SRO',true); END;
    ERROR at line 1:
    ORA-04068: existing state of packages has been discarded
    ORA-04063: package body "SYS.DBMS_TTS" has errors
    ORA-06508: PL/SQL: could not find program unit being called
    ORA-06512: at line 1

    Are you,by any chance, running Oracle 9i installation code in an Oracle 10g database?
    If so : why?
    As far as I know you can only transport tablespaces to a database of an identical version, so it looks like this is not going to work.
    Sybrand Bakker
    Senior Oracle DBA

  • Standby not in sync because test on primary of transportable tablespace etc

    This environment is new build environment , have not in use yet.
    db version is 11.2.0.3 in linux, both primary/standby are configured in RAC two nodes and storage are in ASM storage.
    primary db had tested by migration data using transportable tablespace methods. So the datafiles imported were put in a local filesystem which I have to switch to ASM afterwards.
    In such way, the standby db got the impression that datafiles should be in local filesystem and it got invalidated.
    Here is the error from standby log:
    ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
    ORA-01110: data file 4: '/stage/index.341.785186191'
    and datafiles names are all in local filesystem in standby: /stage/...../
    However in primary datafile names are all in ASM instance:
    +DAT/prd/datafile/arindex.320.788067609
    How to resolve such situation?
    Thanks

    My steps for transportable tablespaces after scp the datafiles to linux are import the transportable datafiles into the database. and then using rman to copy it to "+DATA' in asm. and then switch dababase to copy.
    Those procedure all worked on primary.
    The standby was built before the transportable tablespace when there are only system, users, tools etc basic tablespaces. it worked and in sync with primary. However everytime the primary tested data migration with the transportable tablespaces, it will not work.
    so what is the right way to perform this migration? how can I made standby in sync with primary and to read the datafiles in ASM storage?
    Is there a way before the RMAN command to transfer the filesystem datafile to ASM, can I copy those local filesystem datafiles to ASM storage ? then do a import transportable datafiles with those on ASM?If you added any datafiles manually then those will be created in standby also as per the settings,
    But here you performing TTS, of course DML/DDLs can be transfered to standby by archive logs, but what about actual datafiles? Here in this case files exist in primary & those files not exist in standby
    AFAIK, you have to perform couple of steps. Once after your complete migration done in primary do as follows. (Do test it)
    1) Complete your migration on primary
    -- Check all data file status and location.
    2) Now Restore standby controlfile & newly migrated tablespaces in standby Database
    -- here you can directly restore to ASM using RMAN, because you are taking backup in primary using RMAN. So RMAN can restore them directly in ASM file system.
    3) Make sure you have all the datafiles where you want and take care no one data file is missing. Crosscheck all tablespace information in primary & standby databases.
    4) Now start *MRP*
    Here is my above plan, But I suggest to test it...
    One question, After *successful migration* are you able to SYNC standby with primary earlier ?

  • Transport Tablespace via RMAN

    Hii all
    I configured control file autobackup on and take a backup whole database with "backup database;" command and
    RMAN> transport tablespace users tablespace destination 'c:\Transport' auxiliary destination 'c:\Auxi';
    I am receiving ;
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06024: no backup or copy of the control file found to restore
    In begining lines of rman command I saw that "control_files=c:\Auxi/cntrl_tspitr_ST1_dFcB.f" looks like using unix path format in windows? Have you any idea ?
    Best Regards
    Oracle 10.2.0.3 on Vista Sp2

    hi
    Yes it is on besides I take backup with "backup database include current controlfile" nothing has changed
    RMAN> show all;
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\
    NCFST1.ORA'; # default
    also I have just tested same command on aix platform it works well I think this is related windows platform ?
    Edited by: EB on Sep 25, 2009 4:56 PM

  • Oracle 10gR2 - Any way to speed up Transportable Tablespace Import?

    I have a nightly process that uses expdp/impdp with Transportable Tablespace option to copy a full schema from one database to another. This process was initially done with just expdp/impdp, however the creation of the indexes started to slow down the process at which time I switched to using Transportable Tablespace.
    In the last 3 months, the number of objects in the schema has not changes however the amount of data has increased 15.73%. At the same time, the Transportable Tablespace impdp has increased 30.77% in time to process.
    Is there any way to speed up a Transportable Tablespace impdp in Oracle 10gR2? The docs show that I cannot use parallel with TTS. I have excluded STATISTICS in the export.
    Eventually I will be moving away from doing this TTS expdp/impdp, however for now I need to do what I can to contain the amount of time it takes to process.
    Environment: Oracle 10.2.0.4 (source and destination) on Sun Solaris SPARC v10. We are not using ASM currently. Tablespace is 6 datafiles for a total of 87.5GB, 791 tables, 1924 indexes, 1773 triggers, and 10 LOBs.
    Any help would be greatly appreciated.
    Thanks!
    -Vorpel

    My reading of this thread was that there was a need to be able to do offline setups when the client had lost oracle lite (we get this on PDAs all the time when they go totally dead), so the CD install is something that can be sent out.
    Any install (CD or otherwise) will be empty in terms of applications and data, not much you can do about that on a CD, but depending on the type of device and the storage possibilities you have you can secure the database and application files seperately. for example on a PDA using the external SD or flash for the data and file storage will keep them when the orace directory is lost from main storage and therefore all thet is needed after the oracle lite recovery is to recreate the odbc file (and possibly polite if you have special parameters). The setting of the crr flags for 'real' data on the server is a trick to bring the database up to date without a total rebuild.
    NOTE if you use SD cards etc. on PDAs/small devices, beware of windows ce/mobile power up differential between main memory and external storage. If you power down in the middle of an update or query, you can get device read/write errors when the device powers up due to processing continuing before the storage media is active

  • TIP 03: Transportable Tablespaces in 10g by Joel Pèrez

    Hi OTN Readers!
    Everyday I get connection on Internet and one of the first issues that
    I do is to open the OTN main page to look for any new article or any
    new news about the Oracle Technology. After I open the main page of
    OTN Forums and I check what answers I can write to help some people
    to work with the Oracle Technology and I decided to begin to write some
    threads to help DBAs and Developers to learn the new features of 10g.
    I hope you can take advantage of them which will be published here in
    this forum. For any comment you can write to me directly to : [email protected]
    Please do not replay this thread, if you have any question related to
    this I recommend you to open a new post. Thanks!
    The tip of this thread is: Transportable Tablespaces
    Joel Pérez
    http://otn.oracle.com/experts

    Step 9: Apply this command to see all the options of the export utility
    C:\>
    C:\>EXP HELP=Y
    Export: Release 10.1.0.2.0 - Production on Fri Apr 23 19:48:30 2004
    Copyright (c) 1982, 2004, Oracle.  All rights reserved.
    You can let Export prompt you for parameters by entering the EXP
    command followed by your username/password:
         Example: EXP SCOTT/TIGER
    Or, you can control how Export runs by entering the EXP command followed
    by various arguments. To specify parameters, you use keywords:
         Format:  EXP KEYWORD=value or KEYWORD=(value1,value2,...,valueN)
         Example: EXP SCOTT/TIGER GRANTS=Y TABLES=(EMP,DEPT,MGR)
                   or TABLES=(T1:P1,T1:P2), if T1 is partitioned table
    USERID must be the first parameter on the command line.
    Keyword    Description (Default)      Keyword      Description (Default)
    USERID     username/password          FULL         export entire file (N)
    BUFFER     size of data buffer        OWNER        list of owner usernames
    FILE       output files (EXPDAT.DMP)  TABLES       list of table names
    COMPRESS   import into one extent (Y) RECORDLENGTH length of IO record
    GRANTS     export grants (Y)          INCTYPE      incremental export type
    INDEXES    export indexes (Y)         RECORD       track incr. export (Y)
    DIRECT     direct path (N)            TRIGGERS     export triggers (Y)
    LOG        log file of screen output  STATISTICS   analyze objects (ESTIMATE)
    ROWS       export data rows (Y)       PARFILE      parameter filename
    CONSISTENT cross-table consistency(N) CONSTRAINTS  export constraints (Y)
    OBJECT_CONSISTENT    transaction set to read only during object export (N)
    FEEDBACK             display progress every x rows (0)
    FILESIZE             maximum size of each dump file
    FLASHBACK_SCN        SCN used to set session snapshot back to
    FLASHBACK_TIME       time used to get the SCN closest to the specified time
    QUERY                select clause used to export a subset of a table
    RESUMABLE            suspend when a space related error is encountered(N)
    RESUMABLE_NAME       text string used to identify resumable statement
    RESUMABLE_TIMEOUT    wait time for RESUMABLE
    TTS_FULL_CHECK       perform full or partial dependency check for TTS
    TABLESPACES          list of tablespaces to export
    TRANSPORT_TABLESPACE export transportable tablespace metadata (N)
    TEMPLATE             template name which invokes iAS mode export
    Export terminated successfully without warnings.Joel Pérez
    http://otn.oracle.com/experts

  • Transportable Tablespace Issue

    Hi all,
    I dont know somebody else has posted this error here before, I am sorry If so..
    I am getting an error when I am transporting tablespace's metadata... can anyone help me about this issue ?
    My OS is RH 4
    ======================================================================
    [oracle@localhost export]$ exp parfile=/home/oracle/oracle9i/backup/export/prams.dat
    Export: Release 9.2.0.1.0 - Production on Mon Apr 28 13:33:23 2008
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Username: sys as sysdba
    Password:
    Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.1.0 - Production
    Export done in US7ASCII character set and AL16UTF16 NCHAR character set
    Note: table data (rows) will not be exported
    About to export transportable tablespace metadata...
    EXP-00008: ORACLE error 1001 encountered
    ORA-01001: invalid cursor
    ORA-06512: at "SYS.DBMS_SYS_SQL", line 819
    ORA-06512: at "SYS.DBMS_SQL", line 19
    ORA-06512: at "SYS.DBMS_TTS", line 774
    ORA-01187: cannot read from file 201 because it failed verification tests
    ORA-01110: data file 201: '/home/oracle/oracle9i/oradata/db1/dbf/temp01.dbf'
    ORA-06512: at "SYS.DBMS_PLUGTS", line 1093
    ORA-06512: at line 1
    EXP-00000: Export terminated unsuccessfully
    ====================================================================
    My parameter file looks like below
    TRANSPORT_TABLESPACE=y
    TABLESPACES=users
    FILE=/home/oracle/oracle9i/backup/export/ts_users_28042008_10:04.dmp
    LOG=/home/oracle/oracle9i/backup/export/explog.log

    Check the similar sort of thread.
    Re: Transportable tablespace
    Regards,
    Sabdar Syed.

  • Transportable tablespace /imp problem

    Dear all ,
    please i need to correct me if i am wrong
    transportable tablespace can you done of different version of oracle database
    (means can do that task from lower to upper ex:10g.2 to 11g.2) take in your consideration the limitation of this taks.???
    1. when i do this task in same platform unix to unix and same edians big to big
    there is no way to convert datafile or tablespace
    the take is done by take tablespace read only and then exp this tablespace and ftp the datafile and dmp file
    to new server and switch tablespace read write thus imp the dmp ???
    2. when this taks is done from win to unix from 10g.2 to 11g.2
    check the self_contained this in the two and take tablespace read only and convert and exp and ftp the datafile and dmp file
    to new server thus convert the datafile and then imp and the last one switch the tablespace in read write???
    please i need your opinion obout this ?????
    and i need your advice in import
    imp USERID=\'sys/iti_ICON_sys as sysdba\' \ tablespaces=USERS transport_tablespace=y FROMUSER=sys@TABSTST as sysdba TOUSER=sys@PRODICON as sysdba file=/icon/appl/oracle/trans.dmp datafiles='/icon/appl/oracle/USERS01.dbf'oraicon@billdb03 $ imp USERID=\'sys/iti_ICON_sys as sysdba\' \ tablespaces=USERS transport_tablespace=y FROMUSER=sys@TABSTST as sysdba TOUSER=sys@PRODICON as sysdba file=/icon/appl/oracle/trans.dmp datafiles='/icon/appl/oracle/USERS01.dbf'
    Import: Release 10.2.0.3.0 - Production on Tue Dec 20 12:11:34 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.02.01 via conventional path
    About to import transportable tablespace(s) metadata...
    import done in AL32UTF8 character set and AL16UTF16 NCHAR character set
    export client uses US7ASCII character set (possible charset conversion)
    IMP-00017: following statement failed with ORACLE error 29342:
    "BEGIN sys.dbms_plugts.checkUser('ORAESB'); END;"
    IMP-00003: ORACLE error 29342 encountered
    ORA-29342: user ORAESB does not exist in the database
    ORA-06512: at "SYS.DBMS_PLUGTS", line 1895
    ORA-06512: at line 1
    IMP-00000: Import terminated unsuccessfully
    oraicon@billdb03 $ imp USERID=\'sys/iti_ICON_sys as sysdba\' \ tablespaces=USERS transport_tablespace=y file=trans.dmp datafiles='/icon/appl/oracle/USERS01.dbf'
    Import: Release 10.2.0.3.0 - Production on Tue Dec 20 12:28:50 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.02.01 via conventional path
    About to import transportable tablespace(s) metadata...
    import done in AL32UTF8 character set and AL16UTF16 NCHAR character set
    export client uses US7ASCII character set (possible charset conversion)
    . importing SYS's objects into SYS
    . importing SYS's objects into SYS
    IMP-00017: following statement failed with ORACLE error 29342:
    "BEGIN sys.dbms_plugts.checkUser('ORAESB'); END;"
    IMP-00003: ORACLE error 29342 encountered
    ORA-29342: user ORAESB does not exist in the database
    ORA-06512: at "SYS.DBMS_PLUGTS", line 1895
    ORA-06512: at line 1
    IMP-00000: Import terminated unsuccessfully
    oraicon@billdb03 $
    MANY THANKS

    1 read documentation. You can use rman to convert the files
    2 read documentation. You can use rman to convert the files.
    3 the error message is self explanatory
    4 the error message is self explanatory
    Please do your own research prior to posting.
    Please include only 1 question per post.
    Sybrand Bakker
    Senior Oracle DBA

  • Transportable tablespace

    hi all
    i am new to oracle
    i want to export in oracle 10g. transportable tbs.
    when i execute expdp cmd. it give me error
    cmd>expdp scott@orcl/tiger directory=data_load dumpfile=emp.dmp transport_tablespace=users.
    in documentation i read transport_datafile ?? clearify me what is mean of transport_datafile and we used this clause in expdp cmd then what happend.
    thanx in advance.

    why dont you use exp and imp instead of expdp and impdpbcoz. i thing according to doc. transport tbs in original exp and imp tools used in different ways.
    and oracle 10g. data pump in expdp and impdp transport tbs used in different ways.
    bcoz i search in doc and i found differenct command in original and data pump utitites export and import.
    before that plz clearify what is mean and what is used to transport tablespace i read doc in doc. transport tbs is used to metadata but i not know much about metadata.
    thanx for reply sir

  • Transportable Tablespace Importing - Failed to read stderr from process

    Hello,
    I'm using the normal EM console packaged with Oracle (10gR2) and am trying to import a tablespace on RedHat rel4.
    I follow the Transport Tablespaces link on the maintenance tab and get the option of export or import and also the place to put the host credentials in. I select import, enter the credentials and click continue and am given this error: Failed to read stderr from process.
    I've tried logging into EM as SYSTEM, SYS, and a DBA account I use and have used both root and the oracle account with no luck.
    Searching hasn't gotten me any useful results here or in metalink so I'm stuck. What am I missing?
    Thanks

    Thank you thank you!
    The short version is I traced it back to an error with /bin/nmo which traced back to a failure to run root.sh when upgrading to 10.2.0.3.
    Thanks again!

Maybe you are looking for

  • Open two windows at once

    I am trying to copy something and I can not figure out how to open more than i window at a time.

  • Error 1935 when installing Lightroom 4.1

    I get this message and the install then attempts unsuccessfully to rollback.

  • Entries in employee search dropdown

    Hi, We are trying to customize a screen in MSS. This is the "Employee Search" screen. In this view, we want to take out and add in some of our own entries in the "Employee Selection" dropdown. Does anyone know where are these entries reading from? EC

  • I can not get my playbook to open some PDF files

    I try to open PDF files from my schools online sources and they will download but all i get is a white screen. It will have the correct number of pages loaded but as I scroll there is nothing but white. How do I fix this???

  • I phone 4,requests an original sim!

    I got my i phone 4 from japan,softbank as a gift.when i log to i tunes i cant do anything because they request for an original sim.When contacting the technical support of apple,they said they are unable to help.So, I cant use it here in Sri Lanka.It