Transporting ABAP proxy objects from one environment to another

Hi
I have ABAP client proxy objects ( classes in ECC 5.0 and the corresponding XI message interfaces on the XI server ) - in my development environment.
I need to move the ABAP proxy objects to the Qa environment. Two ways of doing this come to my mind.
1) Move the proxy classes within the ECC 5.0 Dev --> QA using normal transport organizer in ABAP workbench. Parallely , move the XI SCVs - from dev to QA ( export/import ). After both are done, go to QA environment, setup basic ECC5.0 <-> XI connection and check whether my ABAP proxies work.
2) As an alternate approach to no.1, move only the XI based SCVs from Dev -->QA , go to ECC 5.0 QA environment
and regenerate the ABAP proxies there using SPROXY - perhaps this will not be allowed in the QA environment - since the client will not be setup for any object changes/creation.
Any thoughts/links/weblogs on the above is appreciated.
Thanks in advance for your time.

Hi Kartik,
We recently moved our outbound proxies from dev to QA and we followed the first approach and we did not face any issues with the approach.
Also SAP suugests the same approach...
"You create proxy objects in the development system by using the proxy generation functions. They are transported and shipped by using the tools in the development system. There are separate tools in the Integration Repository (see also: Software Logistics for XI Objects)."
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
Regards
Anand
Message was edited by: Anand Torgal

Similar Messages

Using Command Line to move objects from one environment to another enviroment

Can the Command Line (sacmd) be used to move Job Groups/Jobs and other object from one environment to another environment? If so, how?

Moving jobs and objects can only be accomplished by using the Transporter application. There is a document called "Transporter User Guide" with a chapter called "Running Transporter in Batch Mode" that details how to send commands to transporter from the command line. It also details how to setup jobs in Tidal to use this command line. Once you have jobs in Tidal using the Transporter command line, you can then use sacmd to run these jobs.
Does this make sense?

Migrating ODI objects from one environment to another

Hi,
This is for the first time that i am trying to migrate odi objects from one environment to another. I am facing issue and requesting help.
The odi installation is the part of ASCP module of JDEdwards where some standard objects (interfaces/packages) are already created. I have developed some custom interfaces and want to migrate the same to QA environment.
I exported the specific folder (including children) to an xml file and then trying to import the same in the QA environment.
When i choose "Synonym Insert_Update" option to import is prompts error :
You are importing an object from another repository with same identifier. This is forbidden
This is completely new folder which do not exist on target. If I import using Duplication option, it successfully import and assigns new internal ID to object (which is as expected). But how will I update the newly created object in future ?
What should be followed to migrate objects ?

user8628169 wrote:
Hi,
This is for the first time that i am trying to migrate odi objects from one environment to another. I am facing issue and requesting help.
The odi installation is the part of ASCP module of JDEdwards where some standard objects (interfaces/packages) are already created. I have developed some custom interfaces and want to migrate the same to QA environment.
I exported the specific folder (including children) to an xml file and then trying to import the same in the QA environment.
When i choose "Synonym Insert_Update" option to import is prompts error :
You are importing an object from another repository with same identifier. This is forbidden
recreate your OA repository with repository id different from your DEV repository.
Then you should not get this problem.
This is completely new folder which do not exist on target. If I import using Duplication option, it successfully import and assigns new internal ID to object (which is as expected). But how will I update the newly created object in future ?
What should be followed to migrate objects ?

Moving object from one client to another using transport requests...

Hi,
If we want to move one object from one client to another, we go to se09 and release it. I know this. But after release what are the next steps to move it from one system to another ?
Regards,
Rajesh

Hello Rajesh
If the two systems share a common transport directory then you can simply go to transaction STMS, double-click on the import queue (target system), then choose menu Extras -> Other Requests -> Add.
The transport request will be added to the import buffer. Next you can import the request.
If the two systems do not share a common transport directory you can use RFC-enabled function module EPS_FTP_PUT to copy the data and cofile from the source to the target system (check for DIR_TRANS directories using transaction AL11).
Regards
Uwe

Transportation ( how to transport objects from one server to another)

Hi BW guru's
Please tell me the steps to transport objects from one server to another server.

Follow the steps.
1. RSA1 > Transport connection
2. In the right window there is a catagory "all object according to type"
3. Select required object you want to transport.
4. Expand that object , there is select object, double click on this you will get the number of objects, select yours one.
5. Continue.
6. Go with the selection, select all your required objects you want to transport.
7. There is icon Transport Object (Truck Symbol).
8. Click that, it will creat one request, note it down this request.
9. Go to Transport Organiser (T.code SE01).
10. in the display tab, enter the Request, then go with display.
11. Check your transport request whether contains the required objects or not, if not go with edit, if yes "Release" that request.
Thats it, your cordinator will move this request to Quality or Production.
Hope its helps.
Regards

How to transport objects from one server to another server?

How to transport objects from one server to another server.ie..from development to testing sewrver....

Hi Manoj,
Check these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
Transporting Objects IR ID using CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
http://help.sap.com/saphelp_nw2004s/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm
You can choose either File transfer methor or CMS. File transfer method is the simplest.
Sachin

Migrating a webi report from one environment to another using import wizard

Hi Everyone,
Can anyone please tell me what all access should I have on my ID to be able to migrate a webi report from one environment to another environment(e.g. from development to quality).
Regards,
Neeraj Sharma

Hi,
To use the Import Wizard utility, you basically need Administrator, Full Control to Top-level folder, and "Add objects to the folder" and "Edit objects" for this user on the root folder.
You need the least restrictive role, because you require absolute control for content promotion between 2 entitlement systems.
the webi document is the cherry on-top, you;ll have universes, connections, folders to bring over too.
Regards,
H
p.s. check Note 1450708 - How to restrict access to the Import Wizard from a Business Objects Enterprise system
and
Note 1297121 - What rights needed to use Biar File Extraction for a normal user while using Import Wizard ?

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

Moving a template or input schedule from one environment to another in MS

Hi team,
Can anyone let me know how does any template or input schedule is moved from one environment to another in MS version?
Please give me steps.. Appreciate your great help....
Thanks,
Chandrakanth.K

Hi Chandrakanth,
if you want only the template the easiest is just copy the xlt file from the same folder from one server to the other.
If you want to copy all the environment (even data) you can use backup and restore from the server manager (appset\server backup save the zip file on the destination environment and restore it).
From the BPC MS 7.5 SP06 and 10.0 SP01 even the SAP Enhanced Change and Transport System (CTS+) is enabled, for this please see http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/25924
Kind regards
Roberto

How do I move an object from one photo to another and then change the scene, i.e. winter to sum?

How do I move an object from one photo to another and then change the scene, i.e. winter to summer?

OK.
Open the picture with the new scene. This will be your canvas.
Open the picture with object A, select it with one of the selection tools, go to Edit>copy
Go back to the new scene/canvas, Go to Edit>paste
Repeat for object B
Use the move tool to position A & B, each on its own layer. Use the corner handles of the bounding box to resize, if necessary
You should have 3 layers: Background layer, and the 2 layers with A & B
Note: It's best if the resolution of the 3 picture files is the same value.

How to transfer reports from one environment to another

Pls. is there a way to transfer reports from one environment to another (CTE to production f.example) ?
I know that OBIEE has query export in XML, etc. I don´t think it exists in OD but I decided to try a question...
Txs. for any help.
ANtonio

Hi Antonio,
This is not possible, there is no such XML view for CRM On Demand.. I miss it dearly! I advise clients to prototype reports on their staging/CTE environment but actually fully develop these directly on production. Reports can be developed and changed in personal folders with no impact on the live environment, if a report is currently live it can be copied to a personal folder on tweaked in that personal folder.
There is a whisper that R17 could bring us the ability to copy configuration/reports between environments but the Oracle guys would be better placed to update you on this one.
Thanks
Oli @ Innoveer

Move objects from one tablespace to another

Hello
Running Oracle 10g rel 2 and I would like to move all objects from one tablespace to another. There are Primary Key indexes to other tables in this tablespace. The size grew too large and I want to reduce the size.
Thank you.

Good afternoom Sir!
I believe that below "ask tom - moving tables across tablespaces" may help you.
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:47812348053
Regards,
Marcello M.

Moving Object from One container to another in workOrder Dri

Hi , I am able to Move Object from One container to another container in workOrder Driver.
here is my code which i am using
<do-move-src-object class-name="ValeUser">
<arg-dn>
<token-local-variable name="var-str-nwoContent"/>
</arg-dn>
<arg-dn>
<token-text xml:space="preserve">\</token-text>
<token-global-variable name="dirxml.auto.treename"/>
<token-text xml:space="preserve">\</token-text>
<token-global-variable name="hrfeed.inactive.container"/>
</arg-dn>
</do-move-src-object>
Thanks
Adarsh Kumar

Originally Posted by AndersG
Idmlearner,
> am able to Move Object from One container to another container
> in workOrder Driver.
>
Possibly better asked in support.identity-manager
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms
Identity Manager - NOVELL FORUMS
If you are not a nntp user.
Thomas

Advice on Promoting Master Data Services Changes from one environment to another, e.g. DEV to UAT

Hi,
Has anyone got experience of creating a script to promote Master Data Services changes from one environment to another, e.g. Development to Production please?
The changes basically consist of adding several new MDS members which can be accessed via Excel.
Thanks in advance,
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

In MDS terminology an Entity is metadata, and Entity Members are the data.
Typically changes to an Entity (ie model design changes) are promoted to different environments. Model design changes can be replicated manually in each environment or you can Export the model and Import it into the target environment.
Adding, editing and deleting entity members is performed directly in each environment.
If you want to selectively import data from a Dev environment, you can use staging.
David
David http://blogs.msdn.com/b/dbrowne/

Moving field object from one section to another programatically

How do I move text/field objects from one section to another at run time. The ReportObjects collection in the section is readonly and setting the left, top property of the ReportObject only seems to move object within the same section.
I'm using Crystal Reports version 10.5 that comes with VS 2008 professional.
Edited by: iyounus on May 26, 2009 9:41 PM

Hi;
The trial version will offer this capability. You can either use RAS (which is available with Crystal Reports, or Business Objects Enterprise), or the Crystal Reports engine. Which you use will depend on the target for your application, see this for some tips on that:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f006a5e6-7e64-2b10-8a84-8b15ca5cacfc
And, some links to samples that add fields:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20300f17-c566-2b10-b586-b8e8a23e6668
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3085841e-c566-2b10-238c-9f7c3f85d816
https://www.sdn.sap.com/irj/boc/sdklibrary
Regards,
Jonathan

Transporting ABAP proxy objects from one environment to another

Similar Messages

Maybe you are looking for