Tree renderer - change the appearance between selected and not selected
Hi,
I have a JTree that I would like to show for each node different information depending on it selection status. I wrote my own renderer to create the Component to display (it is a JPanel with one JLabel in one case, and a JPanel with mulitple JLabels in the other case).
When I run my program, the node appears ok, but when I select it the tree doesn't update the size of the composnen to be displayed, and that resualts in displaying only a fraction of the information for the selected node.
I have tried to set the tree row height, so the tree will ignore the chached size of the renderer but it didn't work.
Any suggestions?
Thanks,
Benny
Have you tried calling tre.setRowHeight(0) - this is supposed to indicate to the tree that the renderer will determine the height of each cell.
Never tried it, though.
Similar Messages
-
What is the difference between Never and Not supported
What is the difference between Never and Not supported?
Also I want to know what are all the transaction attibutes are supported by MDB and why?Never- If the bean is called in an existing trasaction an exception is thrown.
NotSupported - Methods always execute outside the transaction context. If a transaction is started when this method is called, this method is executed outside the transaction. The initial transaction is continued after the method exits. -
How do I change the contrast between foreground and background in CS4 workspace menus?
Everyone at my agency who has upgraded from CS3 to CS4 is dismayed to discover that they can not read any tabs on the workspace except the highlighted one. The foreground and background colors are simply too close together for anyone who doesn't have very good eyesight to use 8 hours a day, and if you have any form of color blindness, just forget it. Is there any way to change the foreground and background colors in the workspace itself?
I don't believe it's possible. It would be like altering the ribbon in Office 2007 to make it work like Office 2003. This is a built-in function and from the upcoming betas in the Labs it appears they are going to continue this trend. Only thing I can really suggest you do is submit a feature request: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform . Outside of that there is not much you can do.
One other thing has come to mind but it only works for the document area and not other menus. Instead of opening documents in the tabs in one window you can click on Window at the top and choose Cascade to view each file in its own window and go back to Expose for fast-switching between windows. -
How can I change the appearance and text on 'Continue from where you stopped last time?' dialogue
Hi,
I would like to change the appearance (color, header and text) of the 'Continue from where you stopped last time?' dialogue
Could you please help me where to find the files to be edited and how to do so.
Thanks in advance for your help!!!
StephanieHi Stephanie,
Unfortunately there is no way to change the text or appearance of this dialog box. You are stuck with it as is.
www.cpguru.com - Adobe Captivate Widgets, Tutorials, Tips and Tricks and much more.. -
Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?
Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!
-
Select just the values between min and max of an accumulated value over day
Hello Forum,
a value is accumulated over a day and over a period of time. Next day the value is reseted and starts again to be accumulated:
with sampledata as (select to_date('09.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 29 val from dual union all
select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 30 val from dual union all
select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 75 val from dual union all
select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 95 val from dual union all
select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 14 val from dual union all
select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 34 val from dual union all
select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 58 val from dual union all
select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 70 val from dual union all
select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual)
select ts, val
from sampledata
order by ts asc;How should I change the select statement to skip all data sets before the first minimum and the duplicates after the maximum of a day in order to get such a result:
TS VAL
09.09.12 06:12 23
09.09.12 07:12 29
09.09.12 08:12 30
09.09.12 09:12 45
09.09.12 10:12 60
09.09.12 11:12 75
09.09.12 12:21 95
09.09.12 13:21 120
09.09.12 14:21 142
10.09.12 06:12 14
10.09.12 07:12 34
10.09.12 08:12 58
10.09.12 09:12 70
10.09.12 10:12 120
10.09.12 11:12 142
10.09.12 12:21 153Thank youThis solution works perfectly when the accumulated value has its low and its high on the same day. But I found out :( , that there is also data, which has its low yesterday and its high today. For a better understandig of the case, there is a machine, wich is working over 3 Shifts with irregular start and end time. For example Shift1 cann start at 5:50 or at 7:15. The accumulated value of the worked time is accumuated for each shift extra. This solution works for the shift 1 (approximate between 06:00-14:00) and for the shift 2(approximate between 14:00-22:00), because there is the low and the high of the accumulated value on the same day. This solution does not work for the shif 3(approximate between 22:00-06:00), because the high of the accumulated value is or can be the next day.
So the thread title should be: "Select just the values between min and max of an accumulated value over the same day(today) or over two successive days (yesterday and today)
Sampledata for shift 1 or shift 2:
{code}
with sampledata as (select to_date('09.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 29 val from dual union all
select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 30 val from dual union all
select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 75 val from dual union all
select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 95 val from dual union all
select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 143 val from dual union all
select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 144 val from dual union all
select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 145 val from dual union all
select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 147 val from dual union all
select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 148 val from dual union all
select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual)
, got_analytics AS
SELECT ts, val
, MIN (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts DESC
) AS min_val_after
, CASE
WHEN ROW_NUMBER () OVER ( PARTITION BY TRUNC (ts)
ORDER BY val
, ts
) = 1
THEN -1 -- Impossibly low val
ELSE LAG (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts
END AS prev_val
, MIN (val) OVER (PARTITION BY TRUNC (ts))
AS low_val_today
, NVL ( LAST_VALUE (val) OVER ( ORDER BY ts
RANGE BETWEEN UNBOUNDED PRECEDING
AND ts - TRUNC (ts) PRECEDING
, -1
) AS last_val_yesterday
FROM sampledata
SELECT ts
, val
FROM got_analytics
WHERE val <= min_val_after
AND val > prev_val
AND ( val > low_val_today
OR val != last_val_yesterday
ORDER BY ts
{code}
with the expected results:
{code}
1 09.09.2012 06:12:02 23
2 09.09.2012 07:12:03 29
3 09.09.2012 08:12:04 30
4 09.09.2012 09:12:11 45
5 09.09.2012 10:12:12 60
6 09.09.2012 11:12:13 75
7 09.09.2012 12:21:24 95
8 09.09.2012 13:21:26 120
9 09.09.2012 14:21:27 142
10 10.09.2012 06:12:02 143
11 10.09.2012 07:12:03 144
12 10.09.2012 08:12:04 145
13 10.09.2012 09:12:11 146
14 10.09.2012 10:12:12 147
15 10.09.2012 11:12:13 148
16 10.09.2012 12:21:24 153
{code}
And the sampledata for shift 3 is:
{code}
with sampledata as (select to_date('08.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union ALL
select to_date('08.09.2012 02:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
select to_date('08.09.2012 05:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 78 val from dual union all
select to_date('08.09.2012 06:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 08:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 10:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 12:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 16:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 17:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 19:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 21:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 22:00:12', 'dd.mm.yyyy hh24:mi:ss') ts, 24 val from dual union all
select to_date('08.09.2012 22:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 40 val from dual union all
select to_date('08.09.2012 23:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 68 val from dual union all
select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 79 val from dual union all
select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 124 val from dual union all
select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 125 val from dual union all
select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 126 val from dual union all
select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union ALL
select to_date('09.09.2012 22:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 5 val from dual union ALL
select to_date('09.09.2012 22:51:33', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 40 val from dual union all
select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 50 val from dual union all
select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 78 val from dual union all
select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 145 val from dual union all
select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual)
, got_analytics AS
SELECT ts, val
, MIN (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts DESC
) AS min_val_after
, CASE
WHEN ROW_NUMBER () OVER ( PARTITION BY TRUNC (ts)
ORDER BY val
, ts
) = 1
THEN -1 -- Impossibly low val
ELSE LAG (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts
END AS prev_val
, MIN (val) OVER (PARTITION BY TRUNC (ts))
AS low_val_today
, NVL ( LAST_VALUE (val) OVER ( ORDER BY ts
RANGE BETWEEN UNBOUNDED PRECEDING
AND ts - TRUNC (ts) PRECEDING
, -1
) AS last_val_yesterday
FROM sampledata
SELECT ts
, val
FROM got_analytics
WHERE val <= min_val_after
AND val > prev_val
AND ( val > low_val_today
OR val != last_val_yesterday
ORDER BY ts
{code}
with the unexpected results:
{code}
- ts val
1 08.09.2012 00:04:08 23
2 08.09.2012 22:12:13 40
3 08.09.2012 23:21:24 68
4 09.09.2012 22:21:33 5
5 09.09.2012 22:51:33 23
6 09.09.2012 23:21:33 40
7 10.09.2012 00:04:08 50
8 10.09.2012 01:03:08 60
9 10.09.2012 02:54:11 78
10 10.09.2012 03:04:08 142
11 10.09.2012 04:04:19 145
12 10.09.2012 05:04:20 146
{code}
The result should be:
{code}
- ts val
1 08.09.2012 00:04:08 23
2 08.09.2012 02:04:08 45
3 08.09.2012 05:03:08 78
4 08.09.2012 06:54:11 90
5 08.09.2012 22:00:12 24
6 08.09.2012 22:12:13 40
7 08.09.2012 23:21:24 68
8 09.09.2012 01:03:08 79
9 09.09.2012 02:54:11 124
10 09.09.2012 03:04:08 125
11 09.09.2012 04:04:19 126
12 09.09.2012 05:04:20 127
13 09.09.2012 22:21:33 5
14 09.09.2012 22:51:33 23
15 09.09.2012 23:21:33 40
16 10.09.2012 00:04:08 50
17 10.09.2012 01:03:08 60
18 10.09.2012 02:54:11 78
19 10.09.2012 03:04:08 142
20 10.09.2012 04:04:19 145
21 10.09.2012 05:04:20 146
{code}
Thank you for your help! -
What is the difference between task and change request?
Hi all
What is the difference between task and change request?
thanks allDear Ispit,
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/19/3f5bf8a4b011d285090000e8a57770/content.htm">Request Types and Task Types</a>
<a href="http://help.sap.com/saphelp_sm32/helpdata/en/dd/cc86a571464559a2685a404397065b/content.htm">Change Transactions in Change Request Management</a>
For more information about the SAP Change and Transport System (CTS), visit the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/57/38ddff4eb711d182bf0000e829fbfe/frameset.htm
Transport Request is generated in following scenarios:
1. Customizing Request - When doing or changing some customization.
2. WorkBench Request - When configuration is cross-client. Eg Generating new Table, making changes in access sequence, Abap development, etc.
Transport request is not generated for Master Data. For eg: Customer Master, Material Master, price master, etc.
Benefit of Transport Request:
SAP Landscape normally has 3- Tier system:
Development Server - Where customization takes place. Transport request is generated at this level & then first transported to Quality server for testing whether it meets the requirement or not. Once the requirement is met in Quality server then Request is transported from Development Server to Production Server (Actual / Live System)
Quality Server - Mainly useful for testing.
Production Server Actual / Live server, where the real transactions are created & posted.
Procedure to Release & Transport Request:
1. In development server, go to T.Code: SE10 & select the check box Modifiable & enter
2. In the next screen, you will see list of transport request created.
Note: Transport request consist of main request along with sub request. These sub request hold the object to be transported.
3. Expand the main request & you will be able to view the sub requests attached to main request.
4. First release the sub requests.
Note: To release the request, select the request ni & click on release request individually (Do not select release all request)
5. Next release main request.
6. Once the request is released sucessfully, imform the basis person to import the request to QA server.
or
If the authority is with you, through T.Code: STMS, select development server --> select request no & release to QA server. Here when it pops up client no, user id & password, maintain it of QA server & release the request to QA server.
Reward points if this is helpful.
Regards,
Naveen. -
Change the appearance of the default icons and bar in iStore
We have a requirement to change the default icons and the bar of iStore. Is this possible? I have attached the screenshots here - http://www.overpic.net/viewer.php?file=xwho42d6dwuz4pkq96fo.jpg
Thanks in advance.Pl do not post duplicates - Change the appearance of the default icons and bar in iStore
-
I changed the mac´s disk and now sometimes a rainbow circle appears from time to time and processing stops, what is happening??? it is a MAC Pro 8GB RAM Snow leopard 10.6.8
http://www.thexlab.com/faqs/sbbod.html
-
How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.
Okay, I haven't found a way to add an extra space using Find/replace, but you might be able to add some text wrap to the check boxes that will push the text away from them.
Open Find/Replace and click the Object tab.
Click the Specify attributes to find button to the right of the Find Object Format: field.
Under Basic Attributes, choose Stroke and then the Black swatch (assuming the black swatch is applied to the strokes of your check boxes). If there are no other stand-alone objects in your form with a Black stroke, this should be all you need. (If there are Black strokes on your table cells, they will be ignored.)
Click OK
Click the Specify attributes to change button to the right of the Change Object Format: field.
Under Basic Attributes, choose Text Wrap & Other > Text Wrap > Type: > Wrap around bounding box (2nd button from left)
Under Offset, set a Right offset at the distance you'd like to add (I don't know what units you use, but the 3-5 points might work for your purposes...might take some trial-and-error to get it where you want)
Click OK
Click Change All -
Controlling the space between label and Input field in SELECT-OPTION
Hi ,
I am using WDR_SELECT_OPTIONS as a used component in order to dynamically generate the Select option in my WD Component.
Can any one tell me if there is a way to control the spacing between Label and Input field? This is because rest of the UI elements are in one particular order but for this dynamically generated UI.
Please help me.
Thanks,
KavithaHi Kavitha,
The label is required for accessibility reasons. It's not possible to remove it and to use your own label from outside the component to point to it. Labels cannot point to targets across views (and hence acress component) boundaries.
Best regards,
Thomas -
What is the difference between ABAP and HR-ABAP?
Hi people,
Could u just tel me abt what is the difference between ABAP and HR-ABAP?
Thanks in advance,
Sanjeev K.VHi Sir ,
Please have a look below .Hope it is suitable and simpler solution for your question.
Please do reward if useful.
Thankx.
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
Also,
HR:
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
For Personal Admn the Infotypes start with PA0000 to PA1999
Time Related Infotypes start with PA2000 to PA2999.
Orgn related Infotypes start with HRP1000 to HRP1999.
All custom developed infotypes stsrat with PA9000 onwards.
In payroll processing we use Clusters like PCL1,2,3 and 4.
Instead of Select query we use PROVIDE and ENDPROVIDE..
You have to assign a Logical Database in the attributes PNP.
Go through the SAp doc for HR programming and start doing.
http://www.sapdevelopment.co.uk/hr/hrhome.htm
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
sites regarding hr-abap:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
These are the FAQ's that might helps you as well.
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.atomhr.com/library_full.htm
HR Long texts Upload
Look at the below link
And finally,
Few notes are below:
InfoSets in the HR Application
You can use SAP Query in HR to report on HR data. Queries are maintained as described in Creating Queries. The special features of queries created for HR are described in Maintaining Queries in the Human Resources Application. The maintenance procedure for HR InfoSets differs from the described procedure inasmuch as HR data fields are grouped together in infotypes.
InfoSet management in SAP Query is also used for InfoSet Query. For further information, see Functions for Managing InfoSets.
If you want to create InfoSets for HR, you can use logical databases PNP, PNPCE, PAP, and PCH (see HR Logical Databases). The database you must use to create your InfoSet depends on the component in which the data you want to report on is stored.
The reports you can execute using InfoSets based on logical databases PNP (or PNPCE) or PCH are similar, but differ in that they can select different objects. The following table describes the connection between the logical database, and the infotypes you can include in an InfoSet. It also provides you with one or two examples of reports that you can execute using the appropriate InfoSets.
Logical database PNP/PNPCE* PCH PAP
Selection of Persons Objects from Personnel Planning Applicants
Infotypes that can be included in the InfoSet Infotypes for· Personnel Administration (0000-0999) · Time Management (2000-2999) · Payroll infotypes · Infotypes for Personnel Planning objects that can be related to persons If the object type is specified:· Infotypes for the object type · Infotypes for objects that can be related to the specified object typeIf the object type is not specified:· All infotypes · Infotypes for Recruitment (4000-4999)· Some infotypes for Personnel Administration (such as 0001 and 0002)
· Customer infotypes
Reporting examples · Selection of all persons who participated in a specific business event, output of prices for reserved business events · Selection of all persons assigned to a specific personnel area, output of qualifications held by these persons · Selection of all business events held in London in March, output of all persons who participated in these business events · Selection of all positions assigned to a specific organizational unit, output of all persons assigned to the positions · Selection of all applicants hired last year to work on special projects, output of addresses for the applicants selected
Logical database PNPCE (PNP Concurrent Employment) functions just like logical database PNP. The procedure for creating InfoSets is also the same. It only becomes significant if you work with Concurrent Employment.
Creating InfoSets
The maintenance procedure for HR InfoSets differs from the procedure described so far in this section inasmuch as HR data fields are grouped together in infotypes. To set up an InfoSet for the HR application, proceed as follows:
1. On the initial screen for maintaining InfoSets, enter a name for the InfoSet and choose Create.
2. On the next screen, enter a name for the InfoSet and select one of the HR logical databases in accordance with your reporting requirements.
Customer infotypes can be created on all HR logical databases. In each individual case, therefore, you must decide which database to select so that you can report on customer infotypes.
This screen enables you to enter an authorization group. All of the queries that are subsequently created using this InfoSet can only be executed by persons who have this authorization group.
3. Choose .
This takes you to the Infotype Selection for InfoSet screen. You now have the option of creating field groups and assigning fields as required for non-HR InfoSets. Field groups that correspond to infotypes and already contain fields, however, are always created for HR InfoSets. The field groups are displayed in an overview tree in the top right section of the screen.
The infotypes that you included in the InfoSet are displayed in an overview tree on the left of the screen. The infotype fields that are already included in field groups are displayed in a different color, and the corresponding field group ID is displayed.
In the standard system, a field group is created automatically for each infotype that you included in the InfoSet (a field group corresponds to an infotype).
In the standard system, each field group contains the infotype-specific fields. To ensure that working with the InfoSet is as easy as possible, you are advised to restrict your use of fields in each field group to those you really require. This means you should remove fields that are not required.
An infotype's fields must only be assigned to the pertinent field group. Make sure this assignment is correct. If the assignment is incorrect, the InfoSet could be rendered unusable.
When an InfoSet is created, the following fields are transferred automatically to the first field group:
§ Logical database PNPCE or PNP Personnel number
§ Logical database PAP Applicant number
§ Logical database PCH Object ID, plan version, and object type
6. Determine the fields that must be included in the field groups of your InfoSet. If you require further information, see Assigning Fields to a Field Group.
If you want, you can change the default sequence of field groups and fields as required using Drag&Drop.
7. To save the InfoSet, choose .
8. To generate the InfoSet, choose .
On the Change InfoSet (InfoSet name) screen, you can choose Edit ® Change infotype selection to add more infotypes to the InfoSet, or to remove infotypes from the InfoSet. Remember to regenerate the InfoSet afterwards.
This screen also enables you to update InfoSets if, for example, the system contains new additional fields for specific key values. To do so, choose InfoSet ® Additional functions ® Update additional HR fields.
9. Go back to the initial screen for InfoSet maintenance.
10. Choose User group assignment.
11. Select a user group, and save your entry.
sample code
START-OF-SELECTION.
GET pernr.
rp_provide_from_frst p0000 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0001 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0001-plans. " earliest.
endif.
endif.
rp_provide_from_last p0014 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0014 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0014-LGART. .
endif.
endif. -
What is the difference between ActionEvent and SelectionEvent?
Technical Environment:
Oracle jDeveloper 11.1.1.4.0
Windows XP
I think there is something behind ActionEvent and SelectionEvent that makes my code doesn't work.
Here is my problem:
I have three tables. One is a master table, contains summary of something. If I select a row on this table, the second table will show some data, based on the selected row on the first table. Yup, this is a ViewLink, and it is working perfectly. Now, I want the same thing works between the second and third table. If I select a row in second table, the third table should show some data, based on the selected row on the second table. The third table is a ViewObject with some bind parameters. I need to assign values to these parameters, which I get the value from the selected row on the second table. How can I do this?
I have tried to use ExecuteWithParams. Select the row from second table, get the values, pass it into ExecuteWithParams Form, execute and.. it works.. I get the result on the third table. Here is the code how I do that:
public void updateTableEvent(ActionEvent actionEvent) {
DCIteratorBinding iter = gen.getIteratorBinding("SearchView3Iterator");
Row rw = iter.getCurrentRow();
oracle.jbo.domain.Date strDate = (oracle.jbo.domain.Date) rw.getAttribute("Tgl");
String strRkno = (String) rw.getAttribute("Rkno");
oracle.jbo.domain.Number strRkId = (oracle.jbo.domain.Number) rw.getAttribute("Rkid");
DCIteratorBinding iterParam = gen.getIteratorBinding("variables");
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pRkId", strRkId);
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pTgl", strDate);
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pRkNo", strRkno);
OperationBinding operationBinding = gen.getOperationBinding("ExecuteWithParams");
Object result = operationBinding.execute();
But when I tried the same thing on SelectionEvent, I got nothing.. no error and also no result. What I want is just select the row on the second table, and get the result on the third table, with no any button pressing. Here is the code:
public void onRowSelect(SelectionEvent selectionEvent) {
DCIteratorBinding iter = gen.getIteratorBinding("SearchView3Iterator");
Row rw = iter.getCurrentRow();
oracle.jbo.domain.Date strDate = (oracle.jbo.domain.Date) rw.getAttribute("Tgl");
String strRkno = (String) rw.getAttribute("Rkno");
oracle.jbo.domain.Number strRkId = (oracle.jbo.domain.Number) rw.getAttribute("Rkid");
DCIteratorBinding iterParam = gen.getIteratorBinding("variables");
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pRkId", strRkId);
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pTgl", strDate);
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pRkNo", strRkno);
OperationBinding operationBinding = gen.getOperationBinding("ExecuteWithParams");
Object result = operationBinding.execute();
So.. what is actually happening here? What is the differece between ActionEvent and SelectionEvent? Why do they give me difference response?
Thanks for any comments.
Regards,
Novan AnandaHi,
ActionEvent :
A semantic event which indicates that a component-defined action occured. This high-level event is generated by a component (such as a commandbutton,commandLink) when the component-specific action occurs (such as being pressed).
SelectionEvent :
Event that is generated when the selection of a component changes.
//you can also search in api's -
Difference in the Balance between FS10N and Customer Balances in Local Curr
Hi,
When i am trying to match the Balances between FS10N and Customer Balances in Local Currency for the Period 8, we are getting the difference, The reconcilliaton Account was changed on 30.08.2010.
Please help Us in tracing the differences between FS10N and Customer Balances in Local Currency.
What could be the possible reasons for the differences..
ThanksHi Varshani,
Please use the program/report SAPF070 to compare or reconcile your AR with GL balances. You can use SAPF071 to correct any inconsistencies. Provided below documentation for these programs.
SAPF070 - Compare Documents and Account Transaction Figures
Description
This program compares debit and credit transaction figures in customer, vendor, and G/L accounts with the debit and credit totals from documents posted in the corresponding posting period (accounting reconciliation). The sales totals are also compared for customer and vendor accounts. There is no separate comparison for special G/L transactions.
A comparison for G/L accounts can be made in company code currency and in parallel currencies (such as group currency). A comparison for customer and vendor accounts can only be made in company code currency.
After the program has finished, a message is issued to the user that started the program. This message summarizes the results of the reconciliation.
Output
The program compares the totals of an account on a periodic basis. If the debit and credit total differs between account and documents, the account is printed with the debit and credit totals and the difference.
Differences in G/L accounts are shown per transaction currency. The first line shows the amount in local currency, the second line shows the amounts in transaction currency.
If a document which falls within the selection range is posted during the program run, the program is terminated since a reliable result can no longer be delivered.
SAPF071 - Adjust Balances after Comparing Documents/Transaction Figures
Description
If a financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) shows that there are differences between documents and transaction figures, you can use this program to make an adjustment. The documents form the basis for this adjustment. The program adjusts the (redundant) transaction figures, which are only totals of amounts from documents.
Requirements
All of the following listed requirements must be fulfilled:
1. A financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) must be made, and differences must be found between documents and transaction figures.
2. There must not be any inconsistent documents found. These are listed in both SAPF070 and SAPF190 as well as in this program.
3. There cannot be any problems in the other modules. Caution: You have to check this yourself. Financial Accounting may be correct but the other modules may not be, and this will adversely affect the program run.
4. You can only make the adjustment in the ledgers which are compared by program SAPF070. This is ledger 00 or a user-defined ledger for all parallel local currencies except the group currency. (The program displays these ledgers). You have to adjust any additional ledgers as well as average balance ledgers yourself.
5. No documents during the period in which you are adjusting transaction figures can be archived. Caution: You must ensure that these documents are not archived by establishing appropriate organizational rules and procedures.
Only use this program after consulting with SAP or after checking the prerequisites thoroughly.
You should adjust all differences together for a single company code. By setting the program parameters you can limit the adjustment to G/L currency types or to balances in subledgers.
It is advisable to execute a test run first, which will list any differences that are found.
Further notes - Authorizations
Repair program authorization group (F_005)
Company code authorization (F_BKPF_BUK)
Thanks
Venkata Ganesh Perumalla
Edited by: Venkata Ganesh Perumalla on Sep 28, 2010 1:30 PM -
Toggling between single and multiple selection in a table
I am working on ADF faces. I need to switch between single and multiple selection in <af:table based on a button I select.
I cannot use switcher or rendered property inside <af:table. Only the first one is rendering the second one is not rendering based on the switch
<f:facet name="selection">
<af:tableSelectMany autoSubmit="true"
rendered="#{treeBean.multipleRows}"/>
</f:facet>
<f:facet name="selection">
<af:tableSelectOne autoSubmit="true"
rendered="#{treeBean.singleRows}"/>
</f:facet>
When I use inside the switcher, it doesn't like the parent.
Any ideas would be greatly appreciated.
Thanks,
Vijay.I have probably misunderstood what your issue is. I do not know what your version of ADF faces is. Here is some sample code working with my version. Please check if your jdev has "rowSelection" attribute. If it has, please try my sampe code
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="1.2"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html"
xmlns:af="http://xmlns.oracle.com/adf/faces">
<jsp:directive.page contentType="text/html;charset=utf-8"/>
<f:view>
<af:document title="tableSelectMany Demo">
<af:form>
<af:panelGroup layout="vertical">
<af:messages/>
<af:selectOneChoice value="#{sessionScope.tableSelection}"
autoSubmit="true"
id="selType"
label="Selection Type">
<af:selectItem label="Single" value="#{null}"/>
<af:selectItem label="Multiple" value="#{true}"/>
</af:selectOneChoice>
<af:table summary="Periodic table"
binding="#{tableActions.table}"
partialTriggers="selType"
rowSelection="#{sessionScope.tableSelection ? 'multiple' : 'single'}"
value="#{periodicTable.tableData}" var="row" rows="10">
<af:column>
<f:facet name="header">
<af:outputText value="Name"/>
</f:facet>
<af:outputText value="#{row.name}"/>
</af:column>
<af:column>
<f:facet name="header">
<af:outputText value="Symbol"/>
</f:facet>
<af:outputText value="#{row.symbol}"/>
</af:column>
<af:column>
<f:facet name="header">
<af:outputText value="Action Column"/>
</f:facet>
<af:commandButton immediate="true" text="Action"
action="#{row.action}"/>
</af:column>
</af:table>
</af:panelGroup>
</af:form>
</af:document>
</f:view>
</jsp:root>
Maybe you are looking for
-
Redirect page from one application to another application
Suppose there are 2 links in one application. whenevr a link is clicked, it redirects to another appex application. how do you accomplish it?
-
How Do I Get Java For Mac OSX 10.5.8 On A PowerBook G4 Or Update To Minimum MAC OSX 10.6.8 or later Without Spending Any Tech Mind Of My Own And Also Not Buy ANYTHING AT ALL!!!????? Please Help!!!
-
Will Avid MC 6.5 run on Mac OS X 10.6.8?
I'm buying a student version of MC and have OS X 10.6.8. Is it going to run on my computer?
-
Why so long to start my Mac Pro the first time?
Today I just received my new Mac Pro - it's an 8 core machine with the hardware raid card and three 500GB hard drives. So I carefully unpacked it, checked everything and connected up keyboard, mouse, display and LAN cable. Then I turned it on and I'v
-
Update rules:Conditional update
Hi Can we use update rules to conditionally update fields in a record. By condtionally i mean to say that, from a delta record ,can we have some conditions so that based on that, we will update the fields. Like based on conditions , we will update on