Tried to boot from Tiger instead of MacBook disc-can't eject

Hard drive seems to be shot. Tried to confirm this but put in the Tiger disc instead of the MacBook OS disc. Won't recognize this disc (or any disc, when holding down Otion) , only white screen and flashing question mark. I need to get the disc out, then just confirm with Disc Utility if it can start from the MacBook OS intall disc. Any help would be appreciated.thanks

I've tried this and it will not eject. I have held down the trackpad mouse on the left and right side while starting up. The DVD just begins spinning. It will not eject the DVD. Any other tips? I can't do my troubleshooting until that wrong disc is out. Thanks

Similar Messages

Grey circle with cross in the middle when trying to boot from Tiger DVD

When I try to boot from the DVD that installs Tiger, it get the Apple logo and spinning wheel as usual when booting a Mac OS. Then the Apple logo turns into a grey circle with a cross in the middle, signifying "no"! I haven't locked my firmware, but could it be locked? I got the computer from Apple when my original G5 died (it was a lemon). Did Apple lock the firmware???
The OS on my Macintosh HD is Leopard.

So what specific model is this iMac? Is it a G5? Or is it an Intel iMac?
If it is a G5 you have posted in the wrong forum, this is the Intel forum. A G5 is not an Intel Mac, it has the IBM PowerPC CPU.
If this is an Intel, which Intel model is it? Did it come with Mac OS X Tiger installed on it? If it did not come with Tiger, if it came with Leopard, you cannot put Tiger on it.
Dah•veed

I am having trouble trying to boot from my lion osx install disk on a 2007 macbook. The disk ejects when I start up with the option key depressed. Anyone have any ideas?

I am having trouble trying to boot from my lion osx install disk on a 2007 macbook. The disk ejects when I start up with the option key depressed. Anyone have any ideas?
Thank you.

How did you get a Lion OSX install disc? They don't exist. Do you mean the gray disks that came with your 2007 MacBook?
If you mean the gray disks, try starting up with the "c" key held down.
What version of OSX is on your MacBook now? Have you tried booting from the Recovery partition?

I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

Bahamaguy wrote:
I have a MacBook pro late 2011 version it's not booting up ....
So what you want is to be able to boot from OS X and retrieve your files
Create a data recovery/undelete external boot drive
Of course if it's not booting up, it's easier to fix in place
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
...so I am trying to boot from a USB recovery drive but when I select it nothing happens it just goes to the restore options
"Recovery HD" is a partition on your boot drive which you option or commnad r key held at boot time to get into and then repair the Macintish HD partition.
If you have this on a external USB thumb drive, then that's all it is, no OS X, programs or files.
If your talking a USB external drive, it has to be a OS X bootable clone made with Carbon Copy Cloner or SuperDuper and the option key held at boot time gives you that boot option.
Most commonly used backup methods
So what your saying is you have a external clone and by holding the option key down at boot all you get is it directly going to Recovery HD?
There is no Startup Manager option to choose what to boot from?
This could mean Apple changed something, or your external bootable clone isn't one, or the wrong software used so it's not being recognized by Startup Manager as a bootable option.
What did you use to make the external OS X USB bootable drive?

My Macbook has a Kernel Panic when trying to boot from Mac OS Install DVD

It might also be relevant that my Accounts Preference Panel crashes System Preferences when I try to open it. Disk Utility sees no problems with my drive, and booting into single user mode and doing a disk check has no results.
I am running a 2010 Macbook
2GB Ram
2.4 Duel Core Processor
Mac OS 10.6.8
Windows Installed Via Bootcamp, but problems occured before Windows was installed as well.
Anything Else that I need to add?

Try reinstalling Snow Leopard. If you continue getting a kernel panic booting from the DVD, then either you have a bad installer disc or you have a hardware failure.
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Mac Pro trying to boot from external drive instead of HD?

my osx was recently reinstalled at the Genius Bar due to a boot problem caused by a power outage. Now if i want to boot up
i have to unplug time machine first; it is possibly trying to boot from the external drive till i unplug it. What should I do?

I would have:
not let you go home without also buying
a 1500VA UPS
a new system drive
other drives as needed
start with a clean install of the OS to a new drive
Clone your system when you do get a good install and update (Apple only)
then clone again when you have all your apps in place
Don't assume anything works, in fact assume nothing will for now.

External Hard Drive Not recognized when trying to boot from it.

So I am trying to boot from my external hard drive through firewire but my computer doesn't seem to recognize the external. There is some problem with my Macbook not booting up correctly and I want to backup my data before reinstalling Tiger. They did this at the Apple store and ran disk utility on it my Macbooks hard drive. I could access all my data, but now when I get home and plug in my hard drive, hold down option after booting, the only drive that pops up is the Mac HD. I read somewhere to try partitioning the external drive as Mac Journaled and I did so with my working Macbook Pro. Any ideas whats going on?

Well i got most of my information off the old one, now I am trying to reinstall Tiger to the MacBook. Problem is I initially tried to do an archive install and the install kept failing after the second disc when it asked for the second install disc.
The people at the Apple store suggested that I try to do a wipe of the hard drive and install. Now when I put in the Disc 1 install disc and boot from the cd drive it just sits for a while and then ejects disc 1 and goes back to the place where the install failed from before ie: it keeps asking for the second install disc.
I can't figure out a way to get around this and just do a clean install on the machine. Any thoughts would be great.

I am having problems trying to boot from my Windows XP startup disk.

PLEASE HELP ASAP! I upgraded my MacBook Pro 17inch laptop for a larger hard drive. I had my MAC and Windows XP partitions re-installed but I am not able to boot from Windows XP partition. I can see both operation systems in the system preferences of the STARTUP DISK section but when I shutdown my computer and hold down the OPTION key there is no WINDOWS XP icon. I keep getting the error message: NO BOOTABLE DEVICE. INSERT BOOT DISK AND PRESS ANY KEY.
I have a very important project to complete this Friday and all of my files are on my PC partition. Could someone please help me to figure out how to get my PC drive to start rebooting? I would sincerely appreciate it. Thanks!

courtesy of the following site:
http://www.builtfromsource.com/2008/04/05/a-match-made-in-****-windows-xp-boot-c amp-20-and-ntfs/
Feel like wasting several hours? Try installing Windows XP with Boot Camp 2.0 (the version released as part of Mac OS X 10.5 Leopard) using NTFS, the file system required for partitions larger than 32 GB. Then watch as it fails miserably, again and again.
Windows could not start because the following file is missing or corrupt:
<Windows root>\system32\hal.dll.
Please re-install a copy of the above file.
Sound familiar? You didn’t do anything wrong—this is actually Apple’s fault. Hal.dll, the “hardware abstraction layer”, doesn’t have any particular significance; it just happens to be the first file that Windows looks for as it’s loading. Attempting to replace this file with the copy on disk won’t work, and your boot.ini is probably fine.
So how do you fix it, then? The solution is a bit involved, but not too bad all things considered. Here are the steps:
If you haven’t already removed the bad installation, you’ll need to do so. In OS X, open Boot Camp, click Continue, select “Create or remove a Windows partition”, click Continue, and then click Restore.
Create a new partition as you did before, and start the installation.
After the computer has rebooted and it’s booted from the CD, type “R” to go to the console. You should be dumped to the C:\ prompt.
We’re going to reformat the drive as NTFS ourselves instead of letting the Windows installer do it. Type the following and hit Return:
format c: /q /fs:ntfs
Then type this to reboot the computer:
exit
Hold Option after it restarts, then boot to the Windows installation CD again (I believe it boots to the CD by default at this point, but this is just to be sure).
Install to C: (be careful not to select your OS X volume!), but—and this is important—choose NOT to reformat. Leave the file system as is.
Continue the installation process as you would normally.
That’s it! If things went well, the lovely 256-color Windows logo should load and you’ll be looking at Napa Valley in no time.

Problems booting from install disk with MacBook Air

(I'm posting this here b/c it's been three days since I posted this in the /MacBook Air/Networking section and no one's touched it...)
Somehow, the hard disk in my MBA has been corrupted, or something. First symptom I noticed - when booting up, I get stuck on that blank blue screen for, oh, 5 minutes or so, before flashing back to the grey Apple logo screen, then finally getting to the desktop. I tried repairing permissions via Disk Utility; it spun for 10 minutes without doing anything, so I stopped the process. The "Repair Disk" function in Disk Utility was not available for some reason, so I tried "Verify Disk." This failed. I forget the exact wording of the error message, but it said, in essence, that the disk was corrupted and I should run Disk Utility from the system install disk.
Here it gets interesting. I have an MBA SuperDrive, so I first tried booting from there. I'd forgotten about holding down "c" I just held Option, selected the disk, and tried to boot from it. I got a grey screen with the grey Apple logo and a spinning gear; then the Apple logo was replaced by a grey circle with a diagonal line through it (like, from a "no smoking" sign or something) and a spinning gear... this persisted for another 10 minutes or so without going anywhere, so I forced a shutdown.
Thinking the problem might be the SuperDrive, I tried to do the same procedure via Remote Disk (from an iBook G4 running 10.5.5). I followed the instructions, connected the MBA to my wireless network, it found the remote disk, tried to boot from it - but I got the same behavior. Grey Apple screen giving way to grey circle with a diagonal line through it, and an endlessly spinning gear underneath.
What in the world is going on here?
Message was edited by: Jonathan Kussmaul

You seem to have a lot of problems, the last being a kernel panic. This is often attributed to a hardware failure including the possibility of defective RAM.
They are not easy to track down but here are some suggestions to assist you.
What is a Kernel panic?
Resolving Kernel Panic's by Dr Smoke
However, try once again to boot from the install DVD and perform Repair Disk, otherwise, start on the troubleshooting.

Leopard lost my external HD, how to boot from Tiger

When I upgraded (?) to Panther, it wanted to do a backup to my external HD, but it was going to be to large, so I told it not to. The next day when I started up, I typed in the password to my external HD and got a window saying Device not found. I have been following the discussions af many others with the same problem, so I'm getting experimental
I would like to boot from my Tiger disk, but when I insert it in the DVD drive and choose it in startup disk, it restarts, but wants to install. What I am trying to do is to boot from my Tiger disk, turn off password protection for the external, then go back to Leopard, hopefully to a useable external again.
How do I boot from an install disk so I can get to my dock and Finder?

David Tinker wrote:
When I upgraded (?) to Panther, it wanted to do a backup to my external HD, but it was going to be to large, so I told it not to. The next day when I started up, I typed in the password to my external HD and got a window saying Device not found. I have been following the discussions af many others with the same problem, so I'm getting experimental
I would like to boot from my Tiger disk, but when I insert it in the DVD drive and choose it in startup disk, it restarts, but wants to install. What I am trying to do is to boot from my Tiger disk, turn off password protection for the external, then go back to Leopard, hopefully to a useable external again.
How do I boot from an install disk so I can get to my dock and Finder?
You have the right idea. It would be easier if you had another computer with Tiger.
Try this. Boot into the Tiger CD by holding down the "C" key but do not install anything, In the Utilities menu you should have an option to log in as a single user in the terminal mode.
From there you can access the external HD and turn off the password. You will need the instructions how to do this in a terminal from the HD manufacturer or someone else on these boards who had done it before.

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

When no CD in drive bios tries to boot from NIC??

I have homed in on my issue re: "invalid partition" problems upon boot. The situation is:
When Bios (K8N Neo2 Plat bios v 1.1) set to boot from Floppy, then CD, then HDD, AND WITH a CD in the drive, I get a good boot into XP Pro SP1.
If no CD in drive, or if bios set to boot sequence floppy, HDD, CD...I get no boot and a message that I have found all over the net but with no real resolution:
"For Realtek RTL81108/8169(S or 5...can't read my own writing) Gigabit Eathernet Controller beta v1.00 (030811)
Client MAC ADDR (whole lot of numbers) GUID FFFF....FFFF (whole lot of Fs)
PXE-E53: no boot file name recived
PXE-M0F: Exsiting PXE-ROM
Invalid Partition Table"
Now...what the heck is going on? I have read that this would seem to indicate the bios trying to boot from a network, but none of my bios settings indicate that. I've tried disabling Gigabit Ethernet in bios as well since I'm a home user and 10/100 is plenty, but no impact.
For now, I can just keep a CD in the drive but this is rediculous. ANy suggestions? Is this an issue with MSI bios 1.1 or Realtek Ethernet driver (I supposedly have the most recent verison, dated Aug 04)...???
Thanks in advance for nay inputs,
Chris
A64 3500+
MSI K8N Neo 2 PLatinum
Zalman 400B PSU
Asus 16x DVD ROM
Plextor 712-A DVR / CDRW
2 GB (4 x 512) Corsair XMS 3200 C2PT
MSI 9800 Pro 128 (recognized as XT)
Audigy 2 ZS
Sony Floppy
Win XP Pro Sp1

Similar error here..
I am booting up my system for the first time. It boots up past the Platinum screen, But then it gives me the following errors:
For Realtek RTL8110S/8169S Gigabit Ethernet Controller beta v 1.00 (030811)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
His fix was..
lol... I'll go ahead and tell you. I was getting all those weird errors.... saying files were corrupt and such. I noticed that in the bios it was reading my CD-RW drive as Slave and wasn't recognizing my DVD drive at all. So... I put the jumper for the DVD Drive on Master.... popped in the Windows XP CD and everything worked fine.
It's a long shot, but looks like he had a jumper wrong, and it fooled the BIOS into booting from a network.
Sounds to me like something is fooling yours.
You can get that error with RIS, but XP doesn't have RIS as such.
GUID FFFF....FFFF (whole lot of Fs) is the GUID of your firewire.
Like a NIC has a MAC address, a firewire port has a GUID. (lots of digits, more than a MAC)

Trying to upgrade from tiger to snow leopard

I'm a poor college student who would like to upgrade to snow leopard from tiger on my mac book pro. I talked to someone at the apple store, and they wanted me to buy the box set, that had ilife and iwork in it as well. I wanted to know if there is a way to just upgrade the operating system alone. I'm just looking for the most economical way of upgrading. I'd appreciate any help I can get. Thanks.

You can upgrade with the $30 SL retail package, but if you use iLife and/or iWork you should get the Boxed Set, but it isn't necessary if you don't use them.
Note that other third-party applications may need to be upgraded for SL compatibility.
Please read the following about upgrading:
System Upgrade and Installation Procedure
Basic Caveats
1. Disconnect all peripherals except the original mouse and keyboard.
2. Quit all applications if this is not an installation from an Installer DVD.
3. The installation process should not be interrupted. If a power outage or other interruption occurs during installation you may have to erase the hard drive and reinstall from scratch.
4. Once the installation begins do not use the computer in any way except to reply to dialog prompts or to restart when the installation is completed. This is especially critical during the installation stage known as "Optimizing the System."
System Update Procedure
A. Repair hard drive and permissions.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.1 for Leopard) and/or TechTool Pro (4.6.2 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.
B. Clone your existing system to an external Firewire drive.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the startup or source volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Drag the startup or source volume to the Source entry field.
5. Select the backup or destination volume from the leftside list and drag it to the Destination entry field.
6. Check the box to Erase Destination. Skip this step if you've already formatted the drive.
7. Double-check you got it right, then click on the Restore button.
C. Decide upon an installation option.
You have three upgrade options. If you use the Upgrade installation option be sure you have repaired the hard drive and permissions first and made your backup. If you choose the Archive and Install option then you only need to repair the hard drive.
Neither of the above options will erase the disk. Some of your software may not work with a new system. You will need to upgrade those programs. It would be best to do the upgrades to your software before upgrading to the new system version.

Computer tries to boot from VirtualBench

My computer always tries to boot from VirtualBench on restart. I get a black screen with the cursor blinking. If I unplug VirtualBench on restart, no problems. How can make VirtualBench non bootable?
Thanks,
Alex
Solved!
Go to Solution.

I ran into a similar problem on my Dell machine. I was able to work around the problem by going into the BIOS options and disabling booting from USB mass storage devices. Machine boots without problem now.

IMac always tries to boot from CD

Hi,
i installed Windows XP using BootCamp and since then the system always tries to boot from a CD. Now I have to hold down COMMAND while starting the computer to choose the harddrive.
How can I make the system boot from the harddrive automatically?
Thanks

Hold down on the option key on restart.
Choose the mac os x volume icon and then click on the straight arrow.
Once booted into Leopard select system preferences from the apple menu.
Choose Startup Disk and set the volume you want to boot to on startup.
The option key allows you to boot to any volume without changing the default setting.
The Startup Disk preference allows you to set the default startup volume.

Tried to boot from Tiger instead of MacBook disc-can't eject

Similar Messages

Maybe you are looking for