Tried to open applet in browser

I created a swing applet class file and tested it with appletviewer and it works fine. I then tried to open up the html file with the class embedded in IE and it says that the class cannot be found. The class and the html file are in the same directory.
Any help would be appreciated,
Kent

Hi,
IE and Netscape 4.7 require that the broswer have the Java Plug-in. You must use the <object> tag for IE and <embed> tag for Netscape 4.7. You can get the Html Converter at:
http://java.sun.com/products/plugin/index.html
See the gray box on the page.
Netscape 6.0 has the Plug-in as a default install.

Similar Messages

  • I downloaded Firefox 4 Beta and everytime I tried to open up the browser, I get a message stating I need to reboot the computer in order to complete the upgrade; I've rebooted the computer at least 4 times.

    I downloaded Firefox 4 Beta and everytime I tried to open up the browser, I get a message stating I need to reboot the computer in order to complete the upgrade; I've rebooted the computer at least 4 times. I even tried to download a previous version of Firefox and I am still getting the same message that I need to reboot the computer in order to complete the previous upgrade.

    I have a very similar problem myself. Error 42408. And my phone isnt being recognized. I have restored my phone with no luck. I completely uninstalled itunes and reinstalled and it worked then when I ejected unplugged and plugged it back in it had the same problem over again.. I have no idea what to do?

  • Trying to open a new browser window

    Hi
    I have this code to open my website into a new window once
    loaded
    And I was wondering if
    A it is correct, I wanted the dimmensions to be 1000 - 600
    and
    B do I put this code in dreamweaver and if so where abouts do
    i put it?
    myRef = window.open(''+self.location,'mywin',
    'left=20,top=20,width=1000,height=600,toolbar=1,resizable=0');
    appreciate the help
    thanks
    matt

    If that code is attached to an object, then you need to place the getURL line inside the curly braces.  For that line to open a new window you would use...
    getURL("http://www.brokerschoice.com/blackvault.html", "_blank");

  • Oracle 10g XE Error when trying to open manager in browser

    Hi, i'm a newbies in oracle, i'm tryin to life with legal side, so in case with oracle i already downloaded oracle 10g Express Edition, i'm tryin to install it.. it succeed, but i dont know why if i try to open oracle home with this address in my browset [http://127.0.0.1:8080] its show an ERROR messages which is
    220- PC-NAME
    Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
    220 PC-NAME FTP Server (Oracle XML DB/Oracle Database) ready.
    530 Please login with USER and PASS.
    530 Please login with USER and PASS.
    530 Please login with USER and PASS.
    530 Please login with USER and PASS.
    530 Please login with USER and PASS.
    530 Please login with USER and PASS.
    530 Please login with USER and PASS.
    530 Please login with USER and PASS.
    530 Please login with USER and PASS.
    221 Command Too Long. 2048 bytes maximum. Goodbye.
    i had try to adding exception in windows firewall with *1521 ,8080, 2030,* but the message still occurs... i had try many ways too,, its BIG ZERO.... i got nothing,
    i'm using windows vista Business... please anyone try to respon my thread....
    thanks
    Best Regards
    Wildan Abdat

    I figured a way around this in case anyone has the same problem in the future. I just opened Acrobat Pro X, clicked combine files into PDF, selected the file I wanted, saved the "binder" as PDF then saved another version as Reader Extended PDF. I think this helped because it essentially creaded a whole new PDF with the old PDF in it and getting rid of whater hashes or document properties in the last one that wouldn't allow it to work in Reader. Opens perfectly on other computers.

  • I am trying to open a lockdown browser so I can take a quiz for my course. It says I need to shut down the Apple VNC Server. How to I acomplish this ? Thanks

    I have been googling for a while and can't find a solid answer, please help.

    What is the GarageBand version that your friend is using?
    If it is GarageBand '11, version 6.0.5, you can buy GarageBand '11 as a boxed retail version with the iLIfe '11 bundle, e.g. from Amazon.
    Then you can upgrade GarageBand '11 to 6.0.5, using this upgrader from the Support page:
                     GarageBand 6.0.5
    GarageBand 6.0.5 will work well with your system.  But if your friend is using the newest GarageBand 10, this will not help. Then ask your friend to send you audio files for each track, so you can recreate the project from the audio.  Or your friend could also use GarageBand '11 for the projects you want to share, that will run well in all newer MacOS X versions, even with GarageBand 10.0 installed on the same system.
    -- Leonie

  • Opening a new browser window in APEX

    Hi.
    I am trying to open a new browser window in APEX (v2.1) for a new Navigation Bar Entry.
    What I did is the following:
    1) Created the new Navigation Bar Entry
    2) On the properties of this entry I put the Target Type: "URL"
    and on the Target: javascript:window.open('f?p=&APP_ID.:63:&APP_SESSION.:::::' , 'Despre','scrollbars=1,resizable=1,width=400,height=600');
    when I click on my Navigation Bar Entry, the page 63 opens on the same window,NOT on a NEW browser window.
    Can you please help ?

    It seems that I found the answer.
    I had to do the following:
    javascript:(window.open('f?p=&APP_ID.:63:&APP_SESSION.:::::', 'Despre','Scrollbars=1,resizable=1,width=400,height=600')).focus();
    and then logout and login back in the application and it worked.

  • Browser crashes when trying to open 2 applets in 2 browser windows-

    i am having this weird problem, on windows XP, if i open a applet in IE or firefox browser and then open a new browser window and try to open another applet in that windows, the browser simply crashes with no error message or anything,
    For example
    if i click on link below and then when this applet is loaded i open a new browser window and try to open other applet from the link the new opened window closes.
    can some one try this on there PC and let me know if it happens there, and what might be the issue?
    [http://www.realapplets.com/applets/quizmaster/]
    [http://www.realapplets.com/applets/secretpass/]

    Open the Console app in Applications>Utilities and look for log entries at the time of the problem and post them here

  • Open a Specific browser from an applet

    We can open a browser using appletContext().showDocument() Or even using Runtime.getRuntime().exec(rundll32,url.dll,FileProtocolHandler),
    but how can i specify a specific browser in applet. I have an application which works only in IE.

    You can't open a specific browser (if the applet is unsigned), and what's the problem with showDocument()?
    The need for this is unclear to me.

  • Getting error "Error connecting to MDEX" while trying to open micro browser

    Hi,
    I am using endeca Tools and framework 3.1.0 and MDEX 6.3.0.
    While trying to open micro browser from Workbench UI to create page template configurations,I am getting following message in popout:
    Error connecting to MDEX. The data service associated with this editor is not correctly configured.
    Please guide the if you have any clue.
    Thanks,
    Mayank Batra

    I have successfully configured RecordSpotlight editor to use a different endeca instance. What I did is modify apps\[your app name]\config\editors_config\services\dataservice.json file with updated endeca search configuration, save the file, and run apps\[your app name]\control\set_editros_config.bat to apply the change.
    To verify, you can run apps\[your app name]\control\export_site.bat command to export your site configuration, the updated data service config should show in the site xml file exported.
    Hope it helps,
    Michelle

  • Using iphoto 9.2.1 on imac osx 10.6.8 tried to open, got a message that I had no library. Browsed discussions, followed directions to trash plist. Now have app,but no content/backup unavailable. help?

    Using iphoto 9.2.1 on imac osx 10.6.8 tried to open it, got a message that I had no library. Browsed discussions, followed directions to trash plist. Now have app,but no content. Backup unavailable, at least for now.  help?
    Carl

    Well if you're library is gone and you have no back up then you can try a File Recovery app like
    File Salvage
    Regards
    TD

  • I am getting this response when I am trying to open a file: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser."  What do I do?

    I am getting this response when I am trying to open a file: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.”  What do I do?  I have opened this up in the past without a problem. 

    Back up all data.
    If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Trying to open a file in the browser and Adobe reader/acrobat says to quit and try again (1:9) HELP

    trying to open a file in the browser and Adobe reader/acrobat says to quit and try again (1:9)
    Do this over and over and even reinstalled several times to no avail. Mac running the latest Mt. Lion
    HELP

    click file > place formats to import graphic files.
    http://helpx.adobe.com/indesign/kb/supported-file-formats-indesign-cs5.html

  • I am using server and client systems when i am trying to open the browser in two or more machines it says that firefox is already running, i want to open the browser in all machines simeltaniously

    I am using server and clients machines in my office, here i want to open browsers in all systems simultaneously but i am unable open the browser, when i am trying to open the browser in the second machine it says that firefox is already open... pls. solve this problem
    Thank you

    You can't open one Profile more than once. You need a separate Profile for each browser on each PC that you open.
    https://support.mozilla.com/en-US/kb/Profiles

  • Tried to open yahoo mail in safari, Safari said I had to turn off private browsing how do I do that?

    Can anyone help me figure out how to get yahoo mail to open in safari? I tried but safari couldn't open it and said I had to go to settings-safari-private browsing- turn off, I tried to find the private browsing section but could not locate it please help!

    Close all windows in Safari.
    Now you can see the word 'Private' on the bottom left of screen.

  • RoboHelp HTML - Trying to open any browse or explorer window causes a freeze

    Hi,
    I am using RoboHelp 9 HTML. Trying to open any Browsing window in the project, like the browse button in Insert Image or even a project, not through Recent, causes the application to freeze.
    I tried uninstalling and re-installing with no luck.
    Please any suggestions?
    Thanks,

    Or maybe the dialog boxes have somehow moved off the screen. Usually this happens when switching between single/multi monitors, e.g. when working on a laptop on the train vs tethered to a larger monitor at work/home. Even if you haven't worked with multiple monitors, it's possible something weird could have caused this to happen.
    Anyway, try the following:
    1. Open a problem window. Make sure you don't click anywhere after doing this.
    2. Press Alt Spacebar M.
    3. Press any arrow key.
    4. Waggle the mouse madly until the dialog box appears.
    5. Click to place it where you want.
    Hopefully this is the problem and fixing one window should fix all of the "file open" type dialog boxes.
    Amber

Maybe you are looking for

  • I am trying to transfer photos from my iPhoto library to a newly created one.

    I want to know if I'm doing this the easiest way.  I have an iPhoto library with 45,000 photos.  I just created a new library and want to take some of the photos and put them in the new library.  I created a folder on my desktop where I exported the

  • After updating with the IOS8 my photos are no longer in an album or photo stream.  Any idea how to correct this issue.  Hate this new feature.

    When I updated my iphone and ipad with the new update IOS 8 my photos are no longer in an album or photo stream.  They are in different files with all the dates that they were taken.  I hate this feature.  Is there any way I can get the photo stream

  • Changing RSS Feed in iWeb

    I use iWeb'09, GarageBand and MobileMe, and want to find out how to simply change the existing RSS feed for my podcast series in iWeb without resorting to using any further applications. Many thanks in advance.

  • Multiple buttons problem

    Hi, i have a table displayed on my page and each row has 2 buttons corresponding to it - one is address, one is school. When the address button is clicked that person's address is displayed, and when the school button is clicked that person's school

  • AQ: What is Best Practice ?

    I have a pilot project about to trial messaging to achieve application integration. We are going with AQ to pilot the message layer and use JMS for the API. What is the recommended way to architect AQ given we have multiple databases, across a number