Trigger rfc from abap  porxy

hi all;
how to trigger rfc from abap  porxy

Hi Mehra,
check this link and just check for only how proxy is being used/...
https://websmp208.sap-ag.de/%7Esapidb/011000358700011142902001E/HOWTosendxmldatatobw.doc
And u can check one more document related to the above link in Services.sap.com (How to push data from BW to XI PDF)
If not Give me u r mail id i will forward it...
Regards,
sridhar
Message was edited by: sridhar reddy kondam

Similar Messages

  • Web Service to ABAP Proxy, Calling RFC from ABAP Proxy

    can any body send me the notes or Step by step process of Webserice of calling RFC using ABAP proxy, I am new to XI. send me detail process of this perticular scenarios

    Hope this helps
    /people/siva.maranani/blog/2005/05/23/communication-between-sap-system-webservice-using-proxies
    also refer to
    /people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
    /people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
    Rgds,
    Kumar
    Message was edited by:
            Kumar

  • How to trigger workflow from abap program

    Hi Experts,
    i have a user developed screen in which there is an option to approve (not a std tcode)
    for which there is no event created.
    i am very new to workflow ,
    now how to create an event and also how to trigger the workflow

    Hi,
    You can run a ABAP report or call a transaction from the BOR's Method directly.
    Check this link for more info.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/9a3cb3971c11d194c60000e82dec10/frameset.htm.
    In order to trigger an event programmatically, we would use the function module SWE_EVENT_CREATE.
    BUS1001006 ( Standard Material )
    here is the sample code.
    DATA: key LIKE sweinstcou-objkey.
    key = '68." Material Number (hard-coded)
    CALL FUNCTION 'SWE_EVENT_CREATE'
    EXPORTING
    objtype = 'BUS1001006'
    objkey = key
    event = 'CREATED'
    CREATOR = ' '
    TAKE_WORKITEM_REQUESTER = ' '
    START_WITH_DELAY = ' '
    START_RECFB_SYNCHRON = ' '
    NO_COMMIT_FOR_QUEUE = ' '
    DEBUG_FLAG = ' '
    NO_LOGGING = ' '
    IDENT =
    IMPORTING
    EVENT_ID =
    TABLES
    EVENT_CONTAINER =
    EXCEPTIONS
    OBJTYPE_NOT_FOUND = 1
    OTHERS = 2
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ELSE.
    WRITE 'Event Triggered'.
    ENDIF.
    COMMIT WORK.
    In order to test whether the event is getting triggered or not, we can make use of Event Trace. Switch on the event trace using the transaction SWELS.
    Press ‘Switch On”.
    Now execute the program developed earlier. Now switch-off the event trace using the same transaction SWELS.
    Now go to transaction SWEL. Here you can list out the events triggered in the particular period of time. Here is the event-trace list:
    Regards

  • Trigger workflow from ABAP webdynpro and attach an Adobe interactive form

    I have a need to create an ABAP Webdynpro that will upload a completed Adobe interactive form and then route the form to multiple approvers thru workflow.  I am having trouble finding any documentation or examples of passing the Adobe form in the workflow.  Do I have to save the content of every field on the form to an internal table and then have every workitem call an ABAP webdynpro to render the form?  Any help or suggestions would be greatly appreciated.

    Hi Joyce,
    This can be done as follows :
    [pdf as an attachment|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60ff6ad3-729b-2b10-6582-fedc82680a29&overridelayout=true]
    Regards,
    Geet

  • Trigger workflow from ABAP webdynpro (having an adobe form)

    Hello All,
    I have developed an Webdynpro (for ABAP) component that has an Adobe Form integrated within it. Now I have been given a requirment that the form (once filled out on the portal) needs to be routed to 2-3 persons for approval and then submitted (or processed in SAP). The approving personnel will look at their UWL on the portal and approve/dissapprove.
    I do not have much hands on experience on such a Workflow scenario as above. I have already completed the adobe form part and the webdynpro section.
    I will really appreciate it if anyone can advise as to how I need to proceed here.
    Thanks in advance, Liz

    Hi Liz,
    You can use the FM SAP_WAPI_START_WORKFLOW. In webdynpro you have the button like "Submit" right? All the process has done, the user can click the submit button to get the approval. Under the button you can call this FM.
    Create one workflow based on your scenario, and pass the workflow number to this FM. So once the submit button is clicked then in back end workflow will getting triggered.
    For more Informations, please have a look at following links.
    SAP_WAPI_START_WORKFLOW doesn't start workflow...
    SAP_WAPI_START_WORKFLOW
    SAP_WAPI_START_WORKFLOW help
    Thanks.

  • Error during creation of web service from abap rfc

    Hi,
    I'm creating a web service from abap rfc (SE37), but at the end  of Creation Wizard I have this error:
    "web service object already exist".
    This is my first web service creation. Into WSADMIN there are not web services with the same name.
    How can I solve this problem?
    Thanks!

    Hi,
    What system/release/SP do you use ?
    Beginning with Netweaver 7.0 SP14, you configure Web services with SOAMANAGER and you don't see them with WSADMIN...
    Regards,
    Olivier

  • How to call the RFC from R/3 to SRM, when we use webdynpro abap? (Urgent)

    Hello
    We use SRM Server 5.5 with classic scenario.
    We want to call RFC in R/3 from webdynpro ABAP.
    How can we do that?
    We are developing the web report using webdynpro abap.
    So we need some of R/3 data such like PR(EBAN)and PO(EKKO,EKPO).
    When user choose the search parameter, report diplay the Shopping cart, PR and PO data on webdynpro.  So we call the R/3 RFC to display the PR, PO data.
    But I tired to call the RFC in R/3, We could not call it.
    How to call the RFC from R/3 to SRM, when we use webdynpro abap?
    Thank you,
    Best Regards,
    SH.

    Hi
    <b>Please look at the following threads as well -></b>
    WebDynpro in SRM
    BAPI's /RFC's in SRM
    BAPI to Change Shopping Cart by RFC
    SRM60 and webdynpro
    Webdynpro Services Exception
    WebDynpro using BAPI has an error
    SRM60 and webdynpro...
    <b>SAP uses META Function modules in SRM to get data from R/3 back-end.</b>
    <u>For getting Purchase requistion data, use the function modules -></u>
    META_REQUISITION_CHANGE        Change purchase requisition              
    META_REQUISITION_CREATE        Create Requisition                       
    META_REQUISITION_DELETE        Delete/close purchase requisition        
    META_REQUISITION_GETDETAIL     Display requisition details              
    META_REQUISITION_GETITEMS      Display requisition items                
    META_REQUISITION_GETRELINFO    Get Releasease Info for requisitions
    <u>For getting Purchase order data, use the function modules -></u>
    META_PO_CREATE                 Create purchase order                    
    META_PO_DELETE                 Delete reservation                       
    META_PO_GETDETAIL              Display purchase order details           
    META_PO_GETITEMS               Display purchase order items             
    META_PO_GETRELINFO             Display purchase order release information
    Hope this will definitely help. Do let me know.
    Regards
    - Atul

  • RFC Call from ABAP (R3) to Webdynpro EP

    Hi experts,
    I have a requirement to initiate a call from an ABAP program on R3 to a standard Portal (Webdynpro) API. Does anyone have any experience with this?
    I understand that normally Portal (Webdynpro) applications will make the RFC call to ABAP via the established JCO connection. However there's very limited literature elaborating how the call can be made in the other direction i.e. from ABAP R3 to Portal
    Anyone, please kindly advise how, if this can be done. Many thanks!
    Best regards,
    Lionel

    Hi,
    I'm trying to make a RFC call from the ABAP program to a built in Java method residing on EP. It is part of a suite of methods provided by the UME engine.
    Typically a call is made from a webdynpro program to a SAP ABAP function module. In this case, I'd like to make a call from the SAP ABAP report to the EP method.
    Best regards,
    Lionel

  • JCO RFC Provider: "Bean not found" when calling EJB from ABAP via RFC

    Hello,
    I'm having trouble calling an EJB in a CE 7.1 system from ABAP via RFC. I'm trying to use the JCO RFC Provider service, which mean that I want to expose an EJB so that it can be called via Remote Function Call.
    I have documented everything, including the code and the deployment descriptors I wrote, in this thread in the CE forum: Jco RFC Provider: Bean not found
    If there's any chance you can help, please do me a favour and look into the problem.
    Thanks a lot!
    Thorsten

    Hi Vladimir,
    Thank you very much, your help was immensely valuable.
    I just had to add the function declaration to the Home Component interface, everything else was correct, and now it works.
    Cheers,
    Thorsten

  • Trigger a workflow from ABAP Webdynpro

    My Scenario:
    Step 1: When a user hits the SAVE button on the webdynpro form, check if that data is consistent only and trigger a message(I have a BAPI to handle this check).
    Step 2: If the data is consistent, then trigger a workflow to send an alert to an agent along with the data user entered on the form.
    Step 3: AGENT shall review the data(Same form from step 1 should appear here) and will have the option to SUBMIT / POST or REJECT. If SUBMITTED, data will be posted to R/3(I have a 2nd BAPI to handle this). If REJECTED, send an alert back to the USER who entered data in step 1.
    I checked lots of threads from the forum, none gave me a complete idea. Can any one give me a good documentation to trigger workflow from webdynpro to handle my requirement.
    I am new to webdynpro.
    I checked this blogs & articles also...
    /people/ginger.gatling/blog/2005/12/14/create-new-uis-for-existing-workflow-tasks-with-abap-web-dynpro-and-universal-worklist
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/wdjava%20archive/using%20web%20dynpro%20java%20and%20web%20dynpro%20abap%20applications%20in%20universal%20work%20list.pdf
    Thanks a lot in advance.
    Best Regards,
    Kiran

    Hello Kiran,
    I slightly misunderstood you requirement earlier. But if I am not wrong this time, here is what you need to do:
    1) The Web dynpro form that you are creating is only for data entry purpose. But the agent who is going to review the data will need an access to this form. So this means that you need to save the content of this form to the database and provide a URL in the workflow workitem which the agent can use to open the web dynpro application with the form data on it.
    2) To access the correct form, you need to save the form data in a Z-table with a GUID attached to it. Generate this GUID using GUID_CREATE function module. In the window controller of the Web dynpro component, there will be a handleDefault method where you can read the parameter'GUID' from the incoming request and use it to read the form data from the database to display the form.
    3) You can use Object Oriented programming approach for creating Workflow. Check the following article to learn how to do that:
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0409e6c-d213-2d10-3cb6-c12d417626c1?quicklink=index&overridelayout=true]
    4) Create a Z-class and use this class as object type in your workflow (instead of BOR object).
    5) In the constructor of this class, pass a parameter GUID, which would be passed when you create an object of this class in the Web Dynpro forms "OnActionSave" method.
    6) Create a method in this class which will do the task of calling the BAPI to save the Acct Document. This method will be used in a Background task in a workflow step (after the agent approves the workitem).
    7) Create a method in the class which generates the URL to the webdynpro application with the GUID passed as parameter.
    (for eg: http://urltoserver/appname?GUID='guidoftheform').
    8) In your save method of WD application, call the method to raise event that triggers the workflow (using OO)
    lv_guid    = '04AE4546EED7101DE10000000A424026'. "use GUID_CREATE
           lv_objtype = 'ZWFCLASS'. " create a Z-class of your own
       TRY.
          CALL METHOD cl_swf_evt_event=>raise
            EXPORTING
              im_objcateg = 'CL'
              im_objtype  = lv_objtype
              im_event    = 'FORM_APPROVE' " this event needs to be defined in ZWFCLASS
              im_objkey   = lv_guid.
        CATCH: cx_swf_evt_exception.
      ENDTRY.
    Please read through the workflow using Object Oriented document in the URL that I have mentioned above before you read through these instructions.
    There would be a way to do this using BOR objects, but this is the way that I have tried and tested to use trigger workflows from Web dynpro applications.
    Best Regards,
    Gaurav
    Edited by: Gaurav Salkar on Apr 6, 2010 6:13 PM

  • Call ABAP RFC From mapping

    HI Guys,
    I have a requirement to call ABAP RFC from Message Mapping.
    Can any one pls share the document links or ideas with me.
    Thanks,
    MS

    Hi
    u can use RFC LoopUp
    if PI 7.0 / 3.0 -- need to write the UDF to execute
    link
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70d90a91-3cf4-2a10-d189-bfd37d9c3231
    if PI 7.1 then u have functionality in MM itself to do so
    rgds
    srini

  • Trigger inbound proxy from ABAP

    Hi Experts,
    We have a requirement to trigger inbound proxy from within an ABAP program. Is it possible to trigger an inbound proxy from ABAP if so please guide me on how to achieve this?
    Thanks
    Sanu

    This requirement cant be achieved.

  • How to trigger sender rfc from r3 system

    Hi experts,
    can any body send  documents about " how to trigger sender rfc from r3 system"
    regards
    sandeep.

    HI Sandeep,
    To send RFC data on timely basis you can schedule the programs.
    In Partner Profile use setting collect program. Use program RSEOUT00 to send data at particular time.
    You can schedule the report RSEOUT00 according to your requirements. So it flushes all the idocs in the background as per your schedule this program.
    Plese refer the below thread, it will help you.
    Re: Triggering Idocs from sender  side
    Idoc triggering from a transaction
    Cheers..
    Vasu
    <i>** Reward Points if found useful **</i>

  • How to initiate a RFC fuction module from ABAP and push data to Java prgm

    I want to push the data from ABAP program to a java program, the RFC connection has to be initiated from ABAP. How can i do this.
    Kindly help me with a example program if possible.
    Thanks in advance.
    Sounder.

    Hi,
    If you are using JCo connector for the interface, then please look into this link
    http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
    aRs

  • How to trigger MDM Workflow  from ABAP Program.

    HI
    I have requriment  to trigger MDM Workflow(Design in MDM) from My Module pool program. Suggest how to do it?
    Thanks in Advance.
    Regards,
    Shyam Babu Sah.

    Hi,
    This question is for forum SAP Netweaver --> Workflow. There are functions and programmes that SAP delivers for this.
    [Example here|Re: How can I trigger workflow from my report]

Maybe you are looking for