Triggers and object groups

I created pre-insert and pre-update triggers at block level. I was only able to move them into an object group when i moved the triggers to the form level. Why is this the case, no change was made to the triggers apart from moving them a level up.
Thanks
Gus

Similar Messages

ASR IOS-XE and object groups

We recently installed a pair of ASR1004 routers and were somewhat (unpleasantly) surprised to find that the "object-group network" and "object-group service" were not supported. After doing some searches on the forums here I found this discussion:
https://supportforums.cisco.com/message/3573041#3573041
At that time (28 Feb 2012) it was mentioned that support for object-groups for ACLs were planned for 3.9S / Q1CY2013. We're running 3.10S and still no object groups so I was just wondering if anyone has heard an updated estimate of when this feature will be added to IOS-XE?

As the release notes state, this feature is implemented in 3.12S:
http://www.cisco.com/c/en/us/td/docs/routers/asr1000/release/notes/asr1k_rn_rel_notes/asr1k_feats_important_notes_312s.html#pgfId-3452835

Object Group Vs Object Libraries

Hi ,
I have not used Object Groups and Object Libraries extensively....and am trying to understand them
Having read the form builder help ,I am still not clear with the following.
My questions are as follows
1)When should I be giving preference to Object Group over OBL?
2)Why will i use an Object Group ,when an object group's object is just a pointer to the
object in the form module?
Grouping of similar objects for one single form module only,does'nt provide me much benefits?
3)How will I reference an Object group's object and not a form's object which I have
moved into the object group and vice versa?
4)OBL module has a data block(say emp) as one of its many object,
how can I use this data block in my new forms module(will I be copying this data block
object from the attached OBL to the data block node of the form module in OBJECT navigator?).
will i have to create a Layout manually if I use the data block of OBL or will forms
builder automatically create a layout for this OBL data block.?
5)What are the types of objects which CANNOT be included in OBL and Object groups?
I am aware that I can't include an item of a data block if i don't include the data block itself.
rgds
s

Hi,
WIP wrote:
Hi ,
I have not used Object Groups and Object Libraries extensively....and am trying to understand them
Having read the form builder help ,I am still not clear with the following.
My questions are as follows
1)When should I be giving preference to Object Group over OBL?Depends on the requirement. The objects in the Object group are limited to the current form module. However, Object libraries can be used across the forms. Of course, you can subclass this object group in other modules.
>
2)Why will i use an Object Group ,when an object group's object is just a pointer to the
object in the form module?Its like a template. You define set of properties (say width, height and font for a text item), and then subclass the object to all the object you create in your form. So, they all will look similar. Also, once after creating the object group, you can add the object group to the object library. This can be very useful.
Grouping of similar objects for one single form module only,does'nt provide me much benefits?
So, here we use Object Library
3)How will I reference an Object group's object and not a form's object which I have
moved into the object group and vice versa?
You cannot reference the individual objects in the object groups.
4)OBL module has a data block(say emp) as one of its many object,
how can I use this data block in my new forms module(will I be copying this data block
object from the attached OBL to the data block node of the form module in OBJECT navigator?).
will i have to create a Layout manually if I use the data block of OBL or will forms
builder automatically create a layout for this OBL data block.?You can add all the Blocks, canvaces, etc to the Object grou, add the object group to the object library. Then, if you just copy/subclass the object group from the Object library, all the blocks, items, canvaces would be created automatically in the target form.
>
5)What are the types of objects which CANNOT be included in OBL and Object groups?
I am aware that I can't include an item of a data block if i don't include the data block itself.
Only the Parent objects can be included in the Object Group (Child objects cannot). However, in the Object Library, you can add the parent as well as child objects. Here, for ex, parent is a data block and child are the items inside the data block
-Arun
>
rgds
s

ICR 002 - Object Groups and Sets

Hi,
Tcode here is FBCR009.
I need one help on the PROCESS 002 for ICR. In the current system, we have implemented the Object groups and Sub groups as mentioned below:
Object Group - 100
Object Subgroup 100
Object group Sequence      Company Field Company Set   Description                   Partner Field     Partner Set    description
100     1     RACCT     RULE2A     B/S Cash Management     RACCT     RULE2B     B/S Cash Management
100     2     RACCT     RULE3A     B/S ST Interest Bearing     RACCT     RULE3B     B/S ST Interest Bearing
100     3     RACCT     RULE4A     B/S ST Non-Interest Bearing     RACCT     RULE4B     B/S ST Non-Interest Bearing
100     4     RACCT     RULE5A     B/S ST Non-Interest Bearing Derivatives     RACCT     RULE5B     B/S ST Non-Interest Bearing Derivatives
100     6     RACCT     RULE7A     P&L LT Interest     RACCT     RULE7B     P&L LT Interest
100     7     RACCT     RULE8A     P&L ST Interest     RACCT     RULE8B     P&L ST Interest
100     8     RACCT     RULE9A     P&L Toll     RACCT     RULE9B     P&L Toll
100     9     RACCT     RULE10A     P&L Royalties     RACCT     RULE10B     P&L Royalties
100     10     RACCT     RULE11A     P&L Rent     RACCT     RULE11B     P&L Rent
100     11     RACCT     RULE12A     P&L Brokerage Commission     RACCT     RULE12B     P&L Brokerage Commission
100     12     RACCT     RULE13A     P&L Warehousing     RACCT     RULE13B     P&L Warehousing
100     13     RACCT     RULE14A     P&L Misc/Other     RACCT     RULE14B     P&L Misc/Other
100     14     RACCT     RULE15A     P&L Insurance     RACCT     RULE15B     P&L Insurance
100     15     RACCT     RULE16A     B/S LT     RACCT     RULE16B     B/S LT
I am a little confused here. The following sets under the sub-group has a logical u201CANDu201D . the customer corporate reporting group would like to see the Config to allow each group of accounts defined as ruleXa reconciled to group of accts defined as ruleXb, e.g.
Rule 2A with Rule 2B
Rule 3A with Rule 3B etc
Each Company set should only reconcile with the partner set.
looked at this OSS Note 1499183 - ICR: Documents are not assigned to the object groups & got even more confused.
Request if you can advice here.
Regarzds
Aahish

Hello Johannes,
Unfortunately what you are trying to do is not possible.
Object groups are defined using the information in the totals table. Therefore fields only available in the line item table cannot be used when setting up object groups. Unfortunately it is also not possible to set up status fields on the totals level because of the standard update process of those fields when setting a status (the line item table is modified directly, there is no totals update). Depending on the details of your setup you might be able to simply add a "normal" field on the totals level and then fill it via BADI. This would probably work quite well if the field does not have to be set manually - and in this case you do not really need the functionality of setting a status manually either.
I hope this helps you in your efforts!
Ralph

Illustrator Crashing when labeling Layers, Groups and Objects - Windows 7

For some reason Illustrator seems to crash (fairly consistently) when labeling Layers, groups and objects with a common label - so ctrl+v each label.
Generally, I can label around 3 in a row before it crashes. I've replicated this error working both on and off the network. Our operating system is Windows 7

Version: Illustrator CC (up to date)
Language: English UK
Group/ object label example: hr.style: gradient transparency.
this error seems to occur when the files are over 500KB - also the files are purely vector and contain very little in the way of transparencies.

Differance b/wObject Group and Object Lirary?

plz,
tell me the main differance b/w object groups and object libraries,in which seanrio we will use object group or object library?

Here is the main difference between them:
About the Object Library
In any development environment, you will always have standards to which you want your developers to adhere as well as common objects which can be reused throughout the development effort.
The Object Library provides an easy method of reusing objects and enforcing standards across the entire development organization.
You can use the Object Library to:
* Create, store, maintain, and distribute standard and reusable objects.
* Rapidly create applications by dragging and dropping predefined objects to your form.
* There are several advantages to using object libraries to develop applications:
* Object libraries are automatically re-opened when you startup Oracle Forms, making your reusable objects immediately accessible.
* You can associate multiple object libraries with an application. For example, you can create an object library specfically for corporate standards, and you can create an object library to satisfy project-specific requirements.
* Object libraries feature SmartClasses-- objects that you define as being the standard. You use SmartClasses to convert objects to standard objects.
Object Group
A container for a group of objects, used to provide the ability to copy or reference related objects.
For more informations, have a look here
[http://www.oracle.com/webapps/online-help/forms/10g/state?navSetId=_&navId=0|http://www.oracle.com/webapps/online-help/forms/10g/state?navSetId=_&navId=0]
Hope it helps you,
Fabrizio
If this answer is helpful or correct, please mark it. Thanks.
Edited by: Fabrizio Delli Priscoli on 23-mar-2009 9.06

Breaking Subclass/Removing Object Group/Without loss of code for child form

Hi all..
This is regarding Forms 10g (breaking inheritance)
I have a base form as well as client form.
The child form is having some properties as common to the base form. so child form is having sub class(inheritance) from the base class with the help of Object Group. This is the exiting setup
Now, client wants the same information as child form with out link with base form.
i.e., they want to remove the Object Group with out distrubing the child form.
Finally, they want the child form as independant from base form. i.e., child form should not have inheritance from the base form and at the same time they don't want to loss of any code to the child form.
There are 1000's of forms like that are need to re-work.
Is there any tool/script available to do this process of work automatically.
Please provide the necessary deatils and help me regarding this.
Regards
Madhava

You CAN add new items to the subclassed block or change triggers code or even add new triggers. Form Builder won't let you create items in-between existing subclassed items or triggers. So if you need to create a new item, create at the end of subclassed item or trigger...
You can not DELETE items of subclassed block or the block itself if it is subclassed. But you can remove the subclassed object from your child module --- by removing class info from the object group in child module --- but it will also remove all the subclassed child objects.
If you delete or change anything in master object, it will directly affect the subclassed object and you can see the change immediatly in the child modules.
When you drag the master object to child, it asks you if you need to subclass or copy, selecting copy will create a separate copy which you can play with in the child module.
And below is brief help on the matter:
If you don't want all the objects in the subclassed object group, then you might consider either subclassing the desired objects individually, or creating an object group which contains only the desired objects.
Edited by: Zaafran Ahmed on Oct 13, 2010 12:41 PM

Problem with subclassing of object groups

Hi All,
I've a template form which i use to create new forms (for creating our own toolbar, triggers etc).
When i subclass the object group of template form to my new form, it creates form level triggers, toolbar data block etc in my new form.
One of the trigger being subclassed is ON-ERROR form level trigger.
The code inside this trigger is std_blk_on_error; // this procedure is a program unit written by us.
But, when i try to compile this new form, it gives me internal error (deplu 3) on this trigger.
Error 0 at line 1, column 1
statement ignored.
Can any one please help me with this?
Regards,
Navnit

std_blk_on_error; // this procedure is a program unit written by us.or is the code
std_blk_on_error;and this fails on all Forms ?
and it works if you remove this trigger from the object group ?

How to include Sales Office and Sales Group into FI report?

Hi,
I have a requirement to add Customer characteristics u201CSales Groupu201D and u201CSales Officeu201D into a FI report which is based on the InfoCube 0COOM_C02. The values that needs to be presented is actual data (Customer Master Data; NOT transactional value.
In the DataSource u201C0COORDER_ATTRu201D, fields Sales Organization and Sales Group are present and it is brought to BW from R3. But I am not able to find the way to get the field Sales Office into SAP BW.
I checked the extraction program for the DataSource u201C0COORDER_ATTRu201D, the fields Sales Org and Sales Group are coming from a table u201CCE41000u201D but in this particular table there is no Sales Office present.
So can anyone guide me out in getting the Sales Office to the DataSource u201C0COORDER_ATTRu201D, or is there any way of getting it in BW directly by reading some Master Data table.
Thanks in advance
Prasapbi

Hi Sangeeta,
As per your statement, my understanding is that the Organization Attributes are not maintained in the Customization. If all the values are properly maintained then based on the Organization Data determination, the system would have picked up the data. You can first check the Organization Structure and see all the attributes are properly maintained or not and then check whether the Object Permitted in determination checkbox is checked. Then create a Transaction and see that all the Organization data are getting filled properly.
Have a look at the following link for a complete guide to the Organization data determination customization.
http://help.sap.com/saphelp_crm70/helpdata/en/6d/5c1738453fde16e10000009b38f8cf/frameset.htm
If the Organization data customization is not meeting your requirements then you can have a second look at the development approach. Then we can have a look at the available Objects to get the desired functionality.
Hope this helps.
Thanks,
Samantak.

Overhead calculation not happening after using Overhead key and orgin group

overhead calculation not happening after using Overhead key and orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

PS Script to find the list of users and the groups in a Workgroup server

Hi There, could you please explain on how to get a complete list of local users and local groups in a "Workgroup" server to which they belong to using Powershell. I'm able to get the users list but couldn't find any help in finding
the script to find to which localgroup the user belong to. Anticipating your response. Also let me know the cmdlet for Win2k3 servers to find the same.

Here's some code from David Pham (don't remember wher I fund this code):
Trap {"Error: $_"; Break;}
Function EnumLocalGroup($LocalGroup)
$Group = [ADSI]"WinNT://$strComputer/$LocalGroup,group"
"Group: $LocalGroup"
# Invoke the Members method and convert to an array of member objects.
$Members= @($Group.psbase.Invoke("Members"))
ForEach ($Member In $Members)
$Name = $Member.GetType().InvokeMember("Name", 'GetProperty', $Null, $Member, $Null)
$Name
# Specify the computer.
$strComputer = gc env:computername
"Computer: $strComputer"
$computer = [adsi]"WinNT://$strComputer"
$objCount = ($computer.psbase.children | measure-object).count
$i=0
foreach($adsiObj in $computer.psbase.children)
switch -regex($adsiObj.psbase.SchemaClassName)
"group"
{ $group = $adsiObj.name
EnumLocalGroup $group }
} #end switch
$i++
} #end foreach

How to add sales office and sales group code in Badi Order_Save?

Hi,
i have a requirement .
the concept is like this ,we have S>D>G lay out.
initially the sales office and sales group were fetching values from "G".
But my requirement is the sales office and sales group should fetch values from "D"..when the transacion is "ZGRW"..
This is in CRM platform...So how shud i assign values of D to sales office and sales area??
how to code this...
help me out
Edited by: VARUN VADNALA on Jun 25, 2009 1:35 PM

Hi Sangeeta,
As per your statement, my understanding is that the Organization Attributes are not maintained in the Customization. If all the values are properly maintained then based on the Organization Data determination, the system would have picked up the data. You can first check the Organization Structure and see all the attributes are properly maintained or not and then check whether the Object Permitted in determination checkbox is checked. Then create a Transaction and see that all the Organization data are getting filled properly.
Have a look at the following link for a complete guide to the Organization data determination customization.
http://help.sap.com/saphelp_crm70/helpdata/en/6d/5c1738453fde16e10000009b38f8cf/frameset.htm
If the Organization data customization is not meeting your requirements then you can have a second look at the development approach. Then we can have a look at the available Objects to get the desired functionality.
Hope this helps.
Thanks,
Samantak.

How to authorization sales office and sales group in VA21 and VA01 t-code

I need to authorization sales office and sales group in va21,va22,va23 and va01, va02, va03 to control users access the sales order.
I found some articles how to resolve this problem.I have created new authorization object Z_VBAK_ VKO, and add these fields to the object: VKORG: Sales Organization, VTWEG:Distribution Channel, SPART: Division, VKBUR:Sales Office, VKGRP: Sales Group, AUART:Sales Document Type, ACTVT:Activity
I have add the object Z_VBAK_VKO to va01, va02, va03 in SU24 translation.
I test the authorization , but fail, va01 and va02 do not check the authorization.
Why? what can i do? please help me .
thanks

Dear Wu
I think you are using the concept of Master Roles and Derived Roles.If ur using then create a master role and derived role for the authorisation group you want. And in the derived role assign the specifics to the respective logins ID. If you want to attach the authorisation to the T-Codes Va01 or VA21 etc then you have to use Exit.
Correct me if i am wrong.
Regards
Jyotsana

How to download ECC customers without Sales Office and Sales Group values

Dear all,
In SD Customer master record we enter Sales Office and Sales Group fields under Sales Area tab-->Sales Tab.
While downloading customers form ECC to CRM, How can I exclude this Sales Office and Sales Group Data from the download.
I want to download customers without this sales office and Sales group data...Kindly suggest me how can I do this.
Your suggestions will be highly appreciated.
Best regards
Raghu ram

Hi Chandrakanth,
I have removed 'Object Permitted in determination' checkbox for all Sales Offices, but still the problem persist.
I am getting following problem in SMW01 while downloading customers.
"Sales office O 50000004 sales group O 50000057 not maintained for sales area O 50000001 C5 Z0
Message no. CRM_BUPA_FRG0140204."
This problem is coming for all customers, so I though of excluding Sales Office and Sales groups from downloading.
Can we use Filters functionality for this, if so what sort of settings need to be maintained for Customer_Main object in R3AC1 transaction.
Please suggest, your suggestions will be highly appreciated.
Best regards
Raghu ram

Implementing "object-group service"

Running 8.2(3) on an ASA 5510
I have created the two following object groups.
object-group service gatewayTCP tcp
port-object eq 88
port-object eq 135
port-object eq 445
port-object eq ldaps
port-object eq 3268
port-object eq 3269
object-group service gatewayTCP-UDP tcp-udp
port-object eq domain
port-object eq 389
port-object eq 464
port-object range 49152 65535
I have run into an issue with "domain" working in the tcp-udp type. The following access-list does not work without explicitly calling out "domain" for both TCP and UDP. Everywhere I looked I appear to be doing it right so what am I missing. Does "permit tcp" need to be "permit ip" to cover both tcp and udp? I found one article with someone suggestiong just make it "permit tcp" and it will work. Not in a position to test at the moment so figured I'd ask here. Want to be sure I'm not getting bit anywhere else related to these object groups in case I am not implementing them correctly?
access-list dmzAccess extended permit tcp host 172.26.11.10 host 10.16.11.203 object-group gatewayTCP
access-list dmzAccess extended permit tcp host 172.26.11.10 host 10.16.11.203 object-group gatewayTCP-UDP
Is this a bug with service object groups? Is there some place I need to enable this feature?

Hi,
Have you tried configuring it like this
object-group service GATEWAY-SERVICES
service-object tcp eq 88
service-object tcp eq 135
service-object tcp eq 445
service-object tcp eq ldaps
service-object tcp eq 3268
service-object tcp eq 3269
service-object tcp eq 53
service-object udp eq 53
service-object tcp eq 389
service-object udp eq 389
service-object tcp eq 464
service-object udp eq 464
service-object tcp range 49152 65535
service-object udp eq 49152 65535
access-list dmzAccess permit object-group GATEWAY-SERVICES host 172.26.11.10 host 10.16.11.203
I am not sure if it was only after software 8.3+ that the command under the actual "object-group" was of format "service-object tcp source" / "service-object tcp destination" (or the same for UDP)
- Jouni

Triggers and object groups

Similar Messages

Maybe you are looking for