Trouble using my mouse in Outlook after installing AA9 Pro

I installed Acrobat 9 Pro on my 64 bit Wondows machine running Vista. Now when I open Microsoft Outlook 2003 I can type, read and send messages but for some reason when I am writing a message I can't use my mouse to insert the curser into text that is already written. I have to use the arrow keys to scroll through the message to fix spelling mistakes and such. I also find that when I work in Outlook and than open a Word document at the same time, my mouse doesn't work in Word 2003 either. Once I quit Outlook, Word will function properly. I also will get an error messaqe after quitting Outlook that asks me if I want to save changes to PDFMCustom. I have tried uninstalling and re-installing and get the same problem. Both programs are updated with the latest versions.
Any ideas?

It's got nothing to do with disabling Acrobat 9, this is the bit that worked for me, it involves changing a 3 to a 2. Read below.
May 21, 2009 2:13 PM in response to: (Joe_Knoernschild) Re: Outlook Word editor warnings after installing Acrobat 9 Professional
I called Adobe and the idots told me to turn off Word as my email editor. That was not an answer so I googled it and found this. It appeared to work for me. Good luck. Now if Adobe would get their act together.
Edit Registry
HKEY_LOCAL_MACHINE\Software\Microsoft\Office\
Outlook\Addins\PDFMOutlook.PDFMOutlook
OutlookThe PDF functions will still be available in Word and the other Office
programs.
Change the LoadBehavior value from 3 to 2
Restart

Similar Messages

Unable to wake screen using magic mouse or trackpad after installing magic mouse

Dear Everyone,
I am using mbp 15 inch early 2011 with 2 GHZ intel i7 processor and a 4gb ram. I would like to tell you that i have installed the mac os x lion and quite happy with the improvement. however, there are same changes which i am not sure whether it is that my mac that causeing theproblem or the bug from the lion itself. i am unable to wake my mbp screen using my magic mouse or trackpad after installing lion. i believe that my mbp has not really enter sleep mode as i dont see the sleep indicator at the bottom right corner flickering. i also believe that it is only the screen that goes to sleep while the hard disk is not. Normally a single swing of the magic mouse or a single swipe of the trackpad will normally wake the screen. in order to wake the screen now is only to click on the magic mouse or trackpad. furthermore, scrolliing page using magic mouse also become unusual after installing the lion. does any of u happen to come across these problems as well? Is there any other way to downgrade to snow leopard back? (i ask this in case that this issue really cannot be fixed). Please help me on this issue. Thank you very much for taking your time to read and reply this thread.
Moonbasher (henry)

First, Lion does not wake on mouse or trackpad movement, only clicks or keyboard presses. This is presumably to avoid waking the computer from display or full sleep accidentally, and is just how Lion works. It's going to take some getting used to, personally, but I've noticed my mac hasn't woken up on it's own. Apparently moving about my apartment moves the mouse enough that Snow Leopard used to wake the iMac. This is not a glitch, and unfortunately, a downgrade is a complicated matter, involving erasing the HD entirely, and restoring from a backup created in Snow Leopard and not used with Lion at all, or manually importing important bits of data, as libraries upgraded by new versions of Mail, iCal, etc will not be compatible with the old versions.
In terms of your mouse scrolling, describe it in a bit more detail; Lion introduces "natural" scrolling, where instead of the mouse wheel moving the "window" over the contents, it moves the contents through the window, like scrolling on an iPhone or iPad. In other words, think of your finger on the mouse as pressing on the page you're looking at and dragging it upward through the field of view. I remember long ago thinking my very first scrolling mouse was backwards, and then adjusting to "down is down, up is up". If this is the behavior you're experiencing, this also is the way Lion works. This, however, can be changed in the mouse or trackpad preference pane in system preferences. Simply deselect "natural" scrolling.
In a more general sense, its usually not a good idea to do a major software upgrade on your primary machine unless you're willing to deal with some zero-day glitches. It sounds like the issues you're having aren't actually glitches, and you should be happy for that, but in the future, you might want to wait a few weeks for other users with more experience with major OS launches to find those bugs and point them out to the community for Apple to fix. In terms of an OS launch, I think this has been absolutely one of the best. I'm seeing very few major glitches resulting in lost data, few things that would really destroy my personal workflows, and compatiblity issues with other products seems to be well documented or negligible. It's also a bit hasty to assume that mere hours after launch Apple would have any ability to fix ACTUAL problems with the OS. My recommendation would be to get used to the change; having to click the mouse at least means you'll never accidentally wake your machine bumping against your desk.

Has anyone experienced problems with Outlook after installing Mavericks?

Has anyone else experienced problems using Microsoft Outlook after installing Mavericks? The computer seems to want to continue reloading emails.

RobertRTillman wrote:
1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
In short, we are screwed and neither company seems to care.
In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

Having trouble with double entries in ical after installing Lion. After entering an event, another one pops up right next to it.

Having trouble with double entries in ical after installing Lion. After entering an event, another one pops up right next to it.

Check iCal preferences, the Accounts Tab. You might have duplicate accounts.

After Installing Logic Pro X, my Logic Pro 9's 32-bit AUs don't work. The 32-bit bridge doesn't open and run either in my Logic pro 9. My 32-bit AU plugins are crossed out. Help?

After Installing Logic Pro X, my Logic Pro 9's 32-bit AUs don't work. The 32-bit bridge doesn't open and run either in my Logic pro 9. My 32-bit AU plugins are crossed out. Help?

michaelvee wrote:
As an overworked professional, I simply have to consider the very viable options out there. Never thought I'd be seriously considering a Cubase product.
It's a Steinberg product, not a Cubase product.. in case you haven't been paying attention Steinberg developed the virtual instrument for use in it's programs way back in Cubase 3.55.. the plethora of virtual instruments and the advent of low-latency drivers can be directly traced to Steinberg/Cubase development.. Logic also borrowed Cubase's arrange page format back in the 1980's. Cubase has borrowed from Logic to be sure but Steinberg has long been an innovator for many of the things we take for granted today. It was Logic/Emagic who licensed the VST technology and ASIO low latency format to use in Logic 4.xx. It was Apple who adapted VST to it's own AU format. Also, Cubase and Nuendo have undergone a lot more innovation over the past three years, Yamaha has been good as a parent company. Cubase is not Nuendo's little brother by the way, they are very close, same exact audio engine, same robustness, they can exchange files, the only difference being Cubase doesn't have some of the high end post features that Nuendo has. I use both Cubase and Logic and occasionally Nuendo at the University here.. I know both programs fairly well, believe me, both Cubase 6 and 7 can hold their own with any DAW out there, they just don't come with a bunch of ready made loops and preset instruments.
LogicX will never be able to use 32-bit instruments without a third party solution, nor will it ever include the Bridge. At least according to the people I know.

Portege 3110ct has no sound after installing XP Pro

I'm a novice when it comes to laptops, so here is the problem: My 3110ct has no sound after installing XP Pro. Didn't have sound when I bought it with another operating system on, report says no sound device installed.
Does this mean I need to get a chip for the laptop or is it a driver I need & where can I find the part or the driver for this.
Please help.

Usually if the sound driver was not installed you will get no sound but also a yellow exclamation mark should appear in the device manager.
If the sound card chip is damage I presume you will be not able to see the yellow exclamation belonging to the sound card in the device manager.
You bought this Portg as a second hand unit. Am I right?
So possibly the sound card is faulty.
The computer uses a ESS ES1978 (Maestro-2E) and ES1918 sound chip.
Check if you can find an XP sound driver in the internet.

Problem with getting PDF Options after installing Acrobat Pro 8.0

Hello
I have some problems after installing Acrobat Pro 8.0 on my MacBook Pro.
In the past I worked with Acrobat Pro 7.0.8. Then when I choose the printer Adobe PDF 7.0 I had always a pulldown menu in the Printer Settings. to decided what kind of PDF I want (Best Quality, PDF/1, PDF/3, Low Quality, etc)
After Intallion Acrobat Pro 8.0, I had both Adobe PDF 7.0 & 8.0 availible in the Printer Menu, but either the PDF Options is not availible for both (in some programs) or for both it is visible as "AdobePDFPDE70" but it has a line through it and I cann't select it.
Then I delete Adobe 7.0 & 8.0 from the folder "/usr/libexec/cups/backend/" and started Adobe Acrobat Pro 8.0 again. It recognised that an Adobe PDF need to be installed but again it is not availible or AdobePDFPDE70 has a line through.
I have still installed Adobe Pro 7.08 on my MacBook Pro because their is no PitStop Professional availible for Adobe Acrobat 8.0
Who can help me to make my PDF Options Availible. I also looked at the Adobe Site for a Solutions but I found only 4 Threads for Acrobat 8 in combination with OS X and it was regarding other problems.
I work with German OS X and german Versions of Acrobat and PitStop
Regards
Gerard
MacBook Pro 17" Mac OS X (10.4.8)

Hello
I solved the problem. The files "AdobePDFPDE700.plugin" & "AdobePDFPDE800.plugin" conflict each other.
I solved it in the following way
- quit Adobe Acrobat
- delete Adobe PDF 7.0 & 8.0 From the Printer Manager
- remove the file "AdobePDFPDE700.plugin" & "AdobePDFPDE800.plugin" from /Library/Printers/PPD Plugins/
- restart Adobe Acrobat Pro 8.0 and activate its self repair function from within the Help menu
- quit Acrobat and re-boot your Mac
- a Printer & "Adobe PDF 8.0" will be availible. Now the PDF Options are availible in all the Programs I working with!
I experienced that the Acrobat Pro 7.08 is very unstabil after the Installation of 8.0, let's hope that PitStop will bring very soon a new Version compatible with Acrobat 8.0

After installing Logic Pro X in my iMac several menus does not appear

After installing Logic Pro X in my iMac intel core i5 Maverixks several menus does not appear

Thanks Eriksimon,
Some menu items were missing. For this reason I took the Control Bar Screenshot only.
Russell Moran went straight to the point.
Thank you for your time!

How to use Time Machine before and after installing a new hard drive

So basically I'm buying a new hard drive for my Macbook pro and I have a lot of files on my computer that I would like to save. I have never used Time Machine before so I need help on how to set it up before AND after installing the harddrive so my files get transferred onto the new hard drive. Thanks in advance

wjosten wrote:
Me, I would never use Time Machine to do this. What I'd suggest you do is get an exterior enclosure for your new drive. Then use either Carbon Copy Cloner or SuperDuper to clone your existing drive to your new drive. Once done, verify your clone is bootable & all of your data present. Then swap drives & use your old drive for Time Machine backups(after erasing it). Then get another drive & exterior enclosure to regularly clone your new drive to.
Unless he was swapping for a lower capacity HDD or to a lower capacity SSD, then the old drive would make a lousy Time Machine disk. However, whenever I swap out a disk I do exactly what you do. CCC to get the ol drive onto a new one. Test by starting up to the new (but still external drive). Then replace the internal drive.
I usually just sell the old drive on eBay. My Time Machine backup is always 2X the size of the internal drive, which I believe is a bit above recommendations, but works for me. The price of large external drives is almost the same as smaller internal ones.

Keep getting "finder quit unexpectedly while using PackageKit Plug-In" intermittently after install of 10.9.2 Mavericks, what should i do?

When i restart, reboot, power down or power up i keep getting (intermittently) an error window pop up saying - "finder quit unexpectedly while using PackageKit Plug-In" - this has only been occuring since after install of 10.9.2 Mavericks. Also powering down or restarting in anyway now takes much longer than normal despite not having any 3rd party apps scheduled to open at startup! - note i also upgraded the memory of my early (2011) 13 inch macbook pro from 4GB to 8GB, but hadnt caused any issues prior to install of Mavericks 10.9.2.
What should i do, can anyone help with a fix other than suggesting i take it into an apple store (as i'm out of warranty) or without having to do a software re-install from the recovery discs? Thanks.

Hello vajrabairava,
This may be the result of a damaged system component. I would recommend reinstalling Mavericks in order to replace any damaged components. This should not affect any data on the system, but I do strongly suggest ensuring that you have a good backup in place prior to reinstalling Mavericks.
Mac Basics: Time Machine backs up your Mac
http://support.apple.com/kb/HT1427
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Cheers,
Allen

Can't use parallels desktop ver.7 after installed OS X Mountain Lion

Dear All
Everyone has solution to fix this issue ? I can't use the parallets desktop ver.7 after installed os x mountain lion.
Please advice.
Thanks & regards

Hi,
Make sure you have the most current build of Parallels 7 - it works well fro me, and the other poster, so unless you have some lind of issue internally, it should work for you.
Try doing a repair permissions from Disk Utility. I needed to do that to get Quicken Essentials to work.
Cheers,
M.

Trouble with Adobe Flash 11 functioning after install

After installing Adobe Flash Player 11 and receiving confirmation, it still will not function when trying to view video. Have removed previous program, followed instructions and tried install several times and still no luck.

http://forums.adobe.com/thread/1195540

After installing, premiere pro 2.0 will not open

I have adobe premiere pro 2.0. I wanted to use it on my new asus laptop. However it told me I needed to activate it but since premiere pro 2.0 is so old the website had told me to download the one with a new serial number to which I did. Now after installing, the programs begins to open but doesn't, what should I do?

The one with the new serial number is CS2.
Is this where you downloaded it from?
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Which operating system? Win 8.1?

Photoshop keeps on getting out of memory error after installing Premier Pro

I just upgrade my CS to CC. Yesterday I installed Photoshop and did my work without any problem but today after installing Premier and After Effect, I keep on getting out of memory error when I'm working even though I don't have any other application running accept photoshop alone. The file I'm working on is a small file, iphone plus size interface. Basically I can open the file, add blur effect and try to type text I will get photoshop telling me that my system is out of memory. Restarting photoshop give the same problem, restarting my computer give the same problem, ie do one thing and next will give memory not enough.
I don't think my system is slow as it is workstation with dual processor and 12 gig of ram, windows 7 64bits 1gb dedicated memory for graphic card.
I uninstall Premier and After Effect and suddenly the problem go away. Photoshop work as per normal. I didn't have the time to reinstall premier again but will try to do it tonight or tomorrow
Anyone experience such problem before?

When you get that error leaver the error showing and use something the can show you how much free disk space there is left on Photoshop scratch disk. It may be a problem with scratch storage space not ram storage space. I see Photoshop use much more scratch space the ram. I have seen Photoshop using less than 10GB of ram on my machine leaving 30GB of free ram on my system unused while using over 100GB of scratch space.

Cannot find flash player 10 after install: xp pro, IE6, SP2

I have been trying for a week to install Flash Player 10 to no avail. I uninstall and reinstall every time. I have XP Professional Media version, IE6, ans SP2. After install, from which I get no errors and a successful install message, I search for flash player and cannot find it anywhere on my C drive. Any ideas? Is there still a problem with trying to install with IE? Thanks for your help and support.

Flash Player is a browser plugin, not an installed application. It's not designed to work as a standalone app for opening FLV or SWF. It's designed to play SWF content inside a web page inside your browser.
Now, if you must open local content then you can either open those using File: Open in your browser, or you can get the FLash Player 10 Standalone player from the archived players technote here: kb2.adobe.com/cps/142/tn_14266.html

Trouble using my mouse in Outlook after installing AA9 Pro

Similar Messages

Maybe you are looking for