Trouble with JTree's and autmoatically expanding nodes

I am writing an application which uses a JTree as a method of browsing through a certain structure (like a file system). I am having a little trouble though, with a number of small issues, which I am finding hard to get answers through searches (and have spent a fair while searching). In navigating the tree, I want to be able to automatically expand nodes.
Firstly, I want the Root node to automatically be expanded. I cannot see ways of doing this. I have seen references to EXPANDED being set for the JTree constructor, but I cannot see any reference in the 1.6 API for this.
Secondly, I want to be able to expand or hide the contents of nodes through other means than clicking on the icon to the left of a non-leaf-node. For example a button that would hide the contents of (i.e. close) the currently selected node. Code such as:
myNode.setExpanded(true);
myNode.setExpanded(false);and
myNode.isExpanded();

That's the ticket - again something I had seen, but had been using in the wrong way, but your suggestion has helped me get it right. I was trying to expand the path before any more nodes were added to the root node. Then nodes are added, and the application loaded with the root node collapsed. So now I have placed the call at the end of the recursive call to populate the tree.
Thanks again.

Similar Messages

Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T

Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T
I am having trouble making outgoing call or answering incoming call.
When I try to call out from my IP 7961 phone, it fails with the message "unknown number".
For incoming call, it rings but when I pick up the call nothing happens,
Put the receiver back on hook, the phone carries on ringing. I am in UK
and just trying to set up test system with one analogue line. Any help will
be most appreciated. My config of the 2811 router is posted below. All calls ineternally works fine.
Thank you for your help.
hostname Test-CME
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1 10.10.10.10
ip dhcp excluded-address 10.139.139.1 10.139.139.10
ip dhcp pool host
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
option 150 ip 10.10.10.1
ip dhcp pool data
network 10.139.139.0 255.255.255.0
default-router 10.139.139.1
dns-server 10.139.139.5
voice-card 0
no dspfarm
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
sip
header-passing
registrar server expires max 3600 min 3600
interface FastEthernet0/1
no ip address
no ip mroute-cache
duplex auto
speed auto
no shut
interface FastEthernet0/1.2
description ** Data VLAN **
encapsulation dot1Q 2
ip address 10.139.139.1 255.255.255.0
interface FastEthernet0/1.3
description ** Voice VLAN **
encapsulation dot1Q 3
ip address 10.10.10.1 255.255.255.0
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
tftp-server flash:S00104000100.sbn
tftp-server flash:TERM41.7-0-3-0S.loads
tftp-server flash:term61.default.loads
tftp-server flash:term41.default.loads
tftp-server flash:CVM41.2-0-2-26.sbn
tftp-server flash:cnu41.2-7-6-26.sbn
tftp-server flash:Jar41.2-9-2-26.sbn
tftp-server flash:term70.default.loads
tftp-server flash:term71.default.loads
tftp-server flash:cnu70.2-7-6-26.sbn
tftp-server flash:Jar70.2-9-2-26.sbn
tftp-server flash:TERM70.7-0-3-0S.loads
tftp-server flash:CVM70.2-0-2-26.sbn
control-plane
voice-port 0/3/0
connection plar opx 202
caller-id enable
dial-peer voice 1 pots
incoming called-number .
destination-pattern 9T
port 0/3/0
telephony-service
load 7914 S00104000100
load 7941 TERM41.7-0-3-0S
load 7961 TERM41.7-0-3-0S
load 7970 TERM70.7-0-3-0S
max-ephones 20
max-dn 40
ip source-address 10.10.10.1 port 2000
calling-number initiator
service phone videoCapability 1
system message MKC CME
url services http://10.10.10.1/voiceview/common/login.do
url authentication
http://10.10.10.1/voiceview/authentication/authenticate.do
time-zone 21
date-format dd-mm-yy
voicemail 600
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
web admin system name admin secret 0 test
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
secondary-dialtone 9
create cnf-files
ephone-dn 1 dual-line
number 201
label 201
description Sarah
name Sarah
ephone-dn 2 dual-line
number 202
label 202
description Vitthal
name User2 Vitthal
ephone-dn 3 dual-line
number 203 secondary
label 203
description Neil
name User3 Neil
ephone 1
video
username "user1" password 201
mac-address 0018.18EE.947F
type 7961 addon 1 7914
button 1:1
ephone 2
video
username "user2" password 202
mac-address 0018.18BB.B973
type 7941
button 1:2
ephone 3
video
username "user3" password 203
mac-address 0018.1885.6BA2
type 7970
button 1:3

Hi
Please find enclosed debug attachment for voice ccapi and ephone. First, I called from outside. Extension 202 rings but when I answered on extension 202 nothing happens. Replace the rceiever and the pone starts ringing again.Second step. I tried to call out by dialing 9 and then number but after a while phone displays unknown number.
Thank you for your help.
Vitthal

Trouble With Opening InDesign and now Photoshop and Illustrator

First off I apologize if this isn't in the correct section. I couldn't find a section specific to my problem since it involves multiple aspects of Adobe products. I was having trouble with InDesign, it kept crashing. So I followed all of the advice I could find on the forums about deleting the preferences and cache information in the Library folder, and that didn't seem to make a difference. So then I thought maybe it needed an update, so I logged into Adobe Application Manager and sure enough, it did. So I clicked on "download" and it stalled there too. Then the manager became unresponsive. I couldn't cancel the update or log out or anything. So then I saw in the forum someone suggested the Adobe Creative Cloud Cleaner Tool if your manager becomes unresponsive. I ran that and then shut my computer off. When I turned it back on, InDesign started working BUT my Photoshop is completely gone from my system (I never messed with it in the first place since I wasn't having any trouble with it.) And the when I tried to click on Illustrator it said "Do you want to begin your trial?" Huh?
I have had a subscription since 2012, why on earth would it suddenly think that I no longer should have access to these programs? If I log on to my Adobe account it shows my subscription and that it's up to date (last payment was April 5, 2015). The versions I was using were the CS versions that I had downloaded directly from Adobe and when I used to have any trouble or when I got a different computer I could just log into my account and then redownload them. They are no longer showing under my products, so I can't figure out what on earth is going on. The website has changed since the last time I downloaded them, so that partly could be me, but I thought they would at least be showing up under products. I contacted Adobe support and the first person I talked to on chat said "this is clearly a technical issue I am transferring you to someone better suited for this," but that's all he said. And I haven't heard from anyone since so I thought I'd make a topic and see if anyone else out there has had a similar problem.

The versions I am using are the CS6 versions.*

HT1657 I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found - please help

I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found - please help

Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

Having trouble with wav files and sample rates

Hi ,I am having trouble with wav files and sample rates .I have been sent multiple projects on wav as the main instrumental ; I wish to record in 48.000kHz .Now comes the problem.When I try to change the project to 48k It seems to pitch up the track.I can't have them send the logic/project file as most have outboard synths,different plug ins etc.This particular case the producer has recorded the synth task in 41.000 kHz .My successful outcome would be to be able t create a project file in 48 kHz .And NOT pitch up whne I add the instrumenta wav file .Any help would be gratefully recieved,this is my first post so any mistakes I may have made go easy

You'll have to convert the actual synth audio file file that the producer gave you to 48kHz. You can do this in the audio Bin in Logic.

I'm having trouble with iTunes synching and accessing the iTunes store.

I'm having trouble with iTunes synching and accessing the iTunes store. When synching, the process tops at the back up stage, freezes and I can't close the iTunes window, need to ctrl alt del. When trying to access the store, the progress bar stops halfway. I've googled heaps and tried most of the standard answers - unistall, reinstall, etc, now looking for some help please.
This has only started a few weeks back, after working smoothly for the 2 years of owning the iPhone 3gs.
Any suggestions will be appreciated, it's getting realy frustrating.
Cheers for now,
Marty

http://support.apple.com/kb/HT1923?viewlocale=en_US
this worked perfectly for me, with no loss of library! BUT was warned about uninstalling things in the order listed...FYI.

Trouble with internal keyboard and touchpad

Hi,
Yesterday I just out of nowhere started having some trouble with my keyboard and touchpad on my MacBook Air.
The problem displayed itself on various ways. One thing was that I couldn't press regulary with the touchpad. When I was pressing one time, it acted like a pressed with two fingers. When I tried to type in my password on the administrator page, some of the keys didn't work at all and some started to act weird. For example when I was pressing the letter B, the "bar" which displayes where you are in the text (don't know the word in English) went backwards, and when I pressed the letter F it went forward. This seemes so weird and also gives me a hope that it might be some setting failure though B stands for backwards and F stands for forward.
I could log in to the guestpage where I tried to write in "notes". In notes, no letters at all was working, only numbers. When I tried to shut the computer down from the apple symbol I was asked to write administrator name and password. When I tried to mark the name to write it, there wasn't a "bar" but a cross, but on the other hand did it work to write in the password field. But of course not B and F..
Usualy I'd just press the on/off botton until the computer lockdown, unfortunately the botton doesn't work. So the only thing I could do was to let the battery die and hope that it would start when I recharged it and pressed start, this didn't go as well as I hoped, so now I'm stuck with a dead macbook air.
Any ideas of what could be the problem or/and any solutions what might do the trick?
Extremly greatful for any answers

Yes you need to use a wired keyboard.

Trouble with LaCie disk and time machine

HI everyone,
I've been having trouble with using time machine to back-up to my 1 TB LaCie drive (purchased 5/12, unfornuately I was dumb and didn't register the drive and no longer have the box with the serial number and there is no serial number on my drive. The only problem I had up until the end of August was that every so often the LaCie drive (using my FW 800 port) would unmount after waking up from sleep.
The end of August the drive unmounted for no reason while I was on the computer doing a task. Could not get the LaCie drive remounted (rebooting, etc. etc.) To make a long story short, ended up calling apple care who took me through resetting my SMC and PRAM to no avail. Was booted to higher level of support who walked me through trying to repair my drive using the disk utiltiy. When that didn't work, she walked me through erasing and reformatting the LaCie drive and starting a new time machine back-up. Every thing ok until about ten days ago.
Last week, when I woke my iMac up from sleep, I got an error saying that the disk was not ejected properly and I could not mount the drive. Restarting did nothing, the disk did not mount. Shutting down and rebooting seemed to solve the problem and the disk was mounted. Every so often I've had the problem with the disk unmounting after waking up from sleep before. So, I changed my energy sleep preferences. At the end of the day when I am done, I'd unmount the LaCie drive before putting the Mac to sleep using the apple menu.
Today I came in to start my day, plugged the drive in and it would not mount. Tried rebooting nothing. Went into the disk utility, at first the LaCie drive passed the disk verify (6:26:25 and 6:26:38). Then I went into repair disk on the indented drive at 6:27:13, I wasn't sure what it is was doing, thinking that it had hung, I stopped the repair at 6:27:24. Exited disk utility, and the LaCie drive mounted. But I was getting a read only error when I tried to back-up using time machine. So, I went back into disk utility at 6:27:35, when I verified the disk (indented disk), I got an error saying the disk need to be repaired. After several minutes the disk could not be repaired. So, I erased and reformatted the drive. Ran a time machine back-up and it seemed to back-up everything on my hard drive. Just ran another verify disk and it passed.
Is the drive failing? Have some other back-ups of my documents, my address book, iCal and am going to make a backup of some of my pref files and important e-mail files and am going to do some more back-ups after I am done.
Have reached out to the women at apple care whom I talked to last August, but don't expect to hear back from her for at least 24 hours.
Here is my disk utility log
2013-11-07 06:26:25 -0500: Verifying partition map for “LaCie”
2013-11-07 06:26:25 -0500: Starting verification tool:
2013-11-07 06:26:25 -0500: Checking prerequisites
2013-11-07 06:26:25 -0500: Checking the partition list
2013-11-07 06:26:25 -0500: Checking for an EFI system partition
2013-11-07 06:26:25 -0500: Checking the EFI system partition’s size
2013-11-07 06:26:25 -0500: Checking the EFI system partition’s file system
2013-11-07 06:26:25 -0500: Checking all HFS data partition loader spaces
2013-11-07 06:26:25 -0500: Checking Core Storage Physical Volume partitions
2013-11-07 06:26:25 -0500: The partition map appears to be OK
2013-11-07 06:26:25 -0500:
2013-11-07 06:26:25 -0500:
2013-11-07 06:26:38 -0500: Verifying partition map for “LaCie”
2013-11-07 06:26:38 -0500: Starting verification tool:
2013-11-07 06:26:38 -0500: Checking prerequisites
2013-11-07 06:26:38 -0500: Checking the partition list
2013-11-07 06:26:38 -0500: Checking for an EFI system partition
2013-11-07 06:26:38 -0500: Checking the EFI system partition’s size
2013-11-07 06:26:38 -0500: Checking the EFI system partition’s file system
2013-11-07 06:26:38 -0500: Checking all HFS data partition loader spaces
2013-11-07 06:26:38 -0500: Checking Core Storage Physical Volume partitions
2013-11-07 06:26:38 -0500: The partition map appears to be OK
2013-11-07 06:26:38 -0500:
2013-11-07 06:26:38 -0500:
2013-11-07 06:27:13 -0500: Disk Utility started.
2013-11-07 06:27:21 -0500: Verifying and repairing partition map for “LaCie”
2013-11-07 06:27:21 -0500: Starting repair tool:
2013-11-07 06:27:21 -0500: Checking prerequisites
2013-11-07 06:27:21 -0500: Checking the partition list
2013-11-07 06:27:21 -0500: Checking for an EFI system partition
2013-11-07 06:27:21 -0500: Checking the EFI system partition’s size
2013-11-07 06:27:21 -0500: Checking the EFI system partition’s file system
2013-11-07 06:27:23 -0500: Checking all HFS data partition loader spaces
2013-11-07 06:27:24 -0500: Reviewing boot support loaders
2013-11-07 06:27:24 -0500: Checking Core Storage Physical Volume partitions
2013-11-07 06:27:24 -0500: Updating Windows boot.ini files as required
2013-11-07 06:27:24 -0500: The partition map appears to be OK
2013-11-07 06:27:24 -0500:
2013-11-07 06:27:24 -0500:
2013-11-07 06:27:35 -0500: Verifying volume “LaCie”
2013-11-07 06:27:35 -0500: Starting verification tool:
2013-11-07 06:27:35 -0500: Checking file system2013-11-07 06:27:35 -0500: Error: This disk needs to be repaired. Click Repair Disk.2013-11-07 06:27:35 -0500:
2013-11-07 06:27:35 -0500: Disk Utility stopped verifying “LaCie”: This disk needs to be repaired. Click Repair Disk.
2013-11-07 06:28:05 -0500:
2013-11-07 06:28:13 -0500: Verify and Repair volume “LaCie”
2013-11-07 06:28:13 -0500: Starting repair tool:
2013-11-07 06:28:13 -0500: Checking file system2013-11-07 06:28:13 -0500: Volume repair complete.2013-11-07 06:28:13 -0500: Updating boot support partitions for the volume as required.2013-11-07 06:35:05 -0500: Stopped by user
2013-11-07 06:44:56 -0500: Disk Utility started.
2013-11-07 06:45:20 -0500: Verifying volume “LaCie”
2013-11-07 06:45:20 -0500: Starting verification tool:
2013-11-07 06:45:20 -0500: Checking file system2013-11-07 06:45:20 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:45:20 -0500: Checking extents overflow file.
2013-11-07 06:45:20 -0500: Checking catalog file.
2013-11-07 06:45:59 -0500: Missing thread record (id = 5057741)
2013-11-07 06:46:06 -0500: Checking multi-linked files.
2013-11-07 06:46:19 -0500: Checking catalog hierarchy.
2013-11-07 06:46:38 -0500: Invalid directory item count
2013-11-07 06:46:38 -0500: (It should be 0 instead of 4)
2013-11-07 06:46:38 -0500: Invalid volume directory count
2013-11-07 06:46:38 -0500: (It should be 166840 instead of 166841)
2013-11-07 06:46:38 -0500: Checking extended attributes file.
2013-11-07 06:47:05 -0500: Checking multi-linked directories.
2013-11-07 06:48:10 -0500: Checking volume bitmap.
2013-11-07 06:48:12 -0500: Checking volume information.
2013-11-07 06:48:12 -0500: The volume LaCie was found corrupt and needs to be repaired.
2013-11-07 06:48:12 -0500: Error: This disk needs to be repaired. Click Repair Disk.2013-11-07 06:48:12 -0500:
2013-11-07 06:48:12 -0500: Disk Utility stopped verifying “LaCie”: This disk needs to be repaired. Click Repair Disk.
2013-11-07 06:48:12 -0500:
2013-11-07 06:50:02 -0500: Verify and Repair volume “LaCie”
2013-11-07 06:50:02 -0500: Starting repair tool:
2013-11-07 06:50:02 -0500: Checking file system2013-11-07 06:50:02 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:50:02 -0500: Checking extents overflow file.
2013-11-07 06:50:02 -0500: Checking catalog file.
2013-11-07 06:50:41 -0500: Missing thread record (id = 5057741)
2013-11-07 06:50:48 -0500: Checking multi-linked files.
2013-11-07 06:51:02 -0500: Checking catalog hierarchy.
2013-11-07 06:51:20 -0500: Invalid directory item count
2013-11-07 06:51:20 -0500: (It should be 0 instead of 4)
2013-11-07 06:51:20 -0500: Invalid volume directory count
2013-11-07 06:51:20 -0500: (It should be 166840 instead of 166841)
2013-11-07 06:51:20 -0500: Checking extended attributes file.
2013-11-07 06:51:47 -0500: Checking multi-linked directories.
2013-11-07 06:52:55 -0500: Checking volume bitmap.
2013-11-07 06:52:56 -0500: Checking volume information.
2013-11-07 06:52:56 -0500: Repairing volume.
2013-11-07 06:52:56 -0500: Missing directory record (id = 5057741)
2013-11-07 06:52:56 -0500: Look for missing items in lost+found directory.
2013-11-07 06:53:10 -0500: Rechecking volume.
2013-11-07 06:53:10 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:53:10 -0500: Checking extents overflow file.
2013-11-07 06:53:10 -0500: Checking catalog file.
2013-11-07 06:53:16 -0500: Incorrect number of thread records
2013-11-07 06:53:22 -0500: Checking multi-linked files.
2013-11-07 06:53:35 -0500: Checking catalog hierarchy.
2013-11-07 06:53:53 -0500: Invalid directory item count
2013-11-07 06:53:54 -0500: (It should be 5 instead of 6)
2013-11-07 06:53:54 -0500: Invalid volume directory count
2013-11-07 06:53:54 -0500: (It should be 166844 instead of 166842)
2013-11-07 06:53:54 -0500: Invalid volume file count
2013-11-07 06:53:54 -0500: (It should be 1056326 instead of 1056321)
2013-11-07 06:53:54 -0500: Checking extended attributes file.
2013-11-07 06:54:20 -0500: Checking multi-linked directories.
2013-11-07 06:55:25 -0500: Checking volume bitmap.
2013-11-07 06:55:26 -0500: Checking volume information.
2013-11-07 06:55:26 -0500: Repairing volume.
2013-11-07 06:58:06 -0500: Rechecking volume.
2013-11-07 06:58:06 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:58:06 -0500: Checking extents overflow file.
2013-11-07 06:58:07 -0500: Checking catalog file.
2013-11-07 06:58:12 -0500: Incorrect number of thread records
2013-11-07 06:58:18 -0500: Checking multi-linked files.
2013-11-07 06:58:31 -0500: Checking catalog hierarchy.
2013-11-07 06:58:50 -0500: Invalid volume directory count
2013-11-07 06:58:50 -0500: (It should be 166844 instead of 166842)
2013-11-07 06:58:50 -0500: Invalid volume file count
2013-11-07 06:58:50 -0500: (It should be 1056326 instead of 1056321)
2013-11-07 06:58:50 -0500: Checking extended attributes file.
2013-11-07 06:59:17 -0500: Checking multi-linked directories.
2013-11-07 07:00:22 -0500: Checking volume bitmap.
2013-11-07 07:00:24 -0500: Checking volume information.
2013-11-07 07:00:24 -0500: Repairing volume.
2013-11-07 07:03:03 -0500: Rechecking volume.
2013-11-07 07:03:03 -0500: Checking Journaled HFS Plus volume.
2013-11-07 07:03:03 -0500: Checking extents overflow file.
2013-11-07 07:03:04 -0500: Checking catalog file.
2013-11-07 07:03:09 -0500: Incorrect number of thread records
2013-11-07 07:03:15 -0500: Checking multi-linked files.
2013-11-07 07:03:29 -0500: Checking catalog hierarchy.
2013-11-07 07:03:47 -0500: Invalid volume directory count
2013-11-07 07:03:47 -0500: (It should be 166844 instead of 166842)
2013-11-07 07:03:47 -0500: Invalid volume file count
2013-11-07 07:03:47 -0500: (It should be 1056326 instead of 1056321)
2013-11-07 07:03:47 -0500: Checking extended attributes file.
2013-11-07 07:04:14 -0500: Checking multi-linked directories.
2013-11-07 07:05:19 -0500: Checking volume bitmap.
2013-11-07 07:05:20 -0500: Checking volume information.
2013-11-07 07:05:20 -0500: The volume LaCie could not be repaired after 3 attempts.
2013-11-07 07:05:21 -0500: Volume repair complete.2013-11-07 07:05:21 -0500: Updating boot support partitions for the volume as required.2013-11-07 07:05:21 -0500: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.2013-11-07 07:05:21 -0500:
2013-11-07 07:05:21 -0500: Disk Utility stopped repairing “LaCie”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
2013-11-07 07:05:21 -0500:
2013-11-07 07:09:45 -0500: Disk Utility started.
2013-11-07 07:11:45 -0500: Preparing to erase : “LaCie”
2013-11-07 07:11:45 -0500:     Partition Scheme: GUID Partition Table
2013-11-07 07:11:45 -0500:     1 volume will be erased
2013-11-07 07:11:45 -0500:         Name        : “LaCie”
2013-11-07 07:11:45 -0500:         Size        : 999.86 GB
2013-11-07 07:11:45 -0500:         File system    : Mac OS Extended (Journaled)
2013-11-07 07:11:45 -0500: Unmounting disk
2013-11-07 07:11:45 -0500: Erasing
2013-11-07 07:11:54 -0500: Initialized /dev/rdisk1s2 as a 931 GB HFS Plus volume with a 81920k journal
2013-11-07 07:11:54 -0500: Mounting disk
2013-11-07 07:11:54 -0500: Erase complete.
2013-11-07 07:11:54 -0500:
2013-11-07 10:38:00 -0500: Disk Utility started.
2013-11-07 10:38:12 -0500: Verifying volume “LaCie”
2013-11-07 10:38:12 -0500: Starting verification tool:
2013-11-07 10:38:14 -0500: Checking file system2013-11-07 10:38:14 -0500: Checking Journaled HFS Plus volume.
2013-11-07 10:38:14 -0500: Checking extents overflow file.
2013-11-07 10:38:14 -0500: Checking catalog file.
2013-11-07 10:38:29 -0500: Checking multi-linked files.
2013-11-07 10:38:29 -0500: Checking catalog hierarchy.
2013-11-07 10:38:41 -0500: Checking extended attributes file.
2013-11-07 10:39:04 -0500: Checking multi-linked directories.
2013-11-07 10:39:31 -0500: Checking volume bitmap.
2013-11-07 10:39:32 -0500: Checking volume information.
2013-11-07 10:39:32 -0500: The volume LaCie appears to be OK.
2013-11-07 10:39:32 -0500: Repair tool completed:
2013-11-07 10:39:32 -0500:
2013-11-07 10:39:32 -0500:

I just got a call back from the upper level support person at apple care who had been advising me on my trouble with time machine and my LaCie 1 TB FWD. I had sent her much of the same verbiage as I posted here. As some of you have probably figured out, the verdict is that the drive is probably failing. She says this because I have had to do two erase and reformats. She thought that the intermitant problem that I have had with the drive unmounting when my iMac wakes from sleep could be related to the drive failing.
In the meantime I have a secondary back-up (not using time machine) and the LaCie 1 TB FWD is working for the moment.
Thanks to all who read all my verbiage.
And in the meantime, I've learned something. I marked this question as solved. But I'm open to other things to try.
Message was edited by: njtreehugger minor edits and update

TS3999 Help! Trouble with my calendar and icloud.

I am having trouble with my calendar and icloud.
Customers send me meeting invites and I can accept them no problem. But if they subsequently change the date or time I get an error message:
Access to “appointment name” in “Home” in account “iCloud” is not permitted.
The server responded:
“403”
to operation CalDAVWriteEntityQueueableOperation
sometimes the time changes in my calendar, sometimes it doesn't, and my customers keep getting messages back from icloud 'accepting' the original date, not the changed date!!
It is driving me an my clients crazy! any help would be appreciated.

I had a problem specific to the Calendar on web-based Firefox (PC) Was asked for a separate sign-in I'd never seen before which didn't work. I resolved this by signing out, signing in again.

Reload JTree and keep expanded nodes

Hi all,
I have spent some time looking around on this, found some useful stuff, but I still cannot seem to get a result.
Here is my situation:
I have a JTree for a GUI desktop app. I build the tree from a database file. The user has the ability to refresh the tree to keep it in sync with any database changes. The problem is that when I refresh, all the nodes that were previously expanded are now collapsed again.
Having looked around, I have seen a lot of JTree.expandRow() answers, but I don't want to use expandRow, as the rows will changes according to any db changes.
I thought a good solution would be to trap any expand or collapse events and for each either add or remove the TreePath for the relevant node onto a List. When the users refreshes the tree, I thought I could run through the list and expand any TreeNodes I find. I also found someone advocating such an approach in another thread. BUT - it doesn't work for me Here is the code for my refresh. Any help/advice, greatly appreciated.
Thanks in advance,
Steve
private void refreshBrowser(){
        System.out.println("Refresh browser - Started");
        rootTreeNode.removeAllChildren(); // remove all nodes from root
        loadBrowserData(); // This method loads nodes from a database
         Iterator<TreePath> TPI = objectTreePaths.iterator(); // run throught my saved paths
        while (TPI.hasNext()) {
            TreePath yTreePath = TPI.next();
            browserTree.expandPath(yTreePath); // Expand each found path
        treeModel.reload(); // model changed - reload it.
        System.out.println("Refresh browser - Complete");
    }

Here is my situation:
I have a JTree for a GUI desktop app. I build the
tree from a database file. The user has the ability
to refresh the tree to keep it in sync with any
database changes. The problem is that when I refresh,
all the nodes that were previously expanded are now
collapsed again.
Having looked around, I have seen a lot of
JTree.expandRow() answers, but I don't want to use
expandRow, as the rows will changes according to any
db changes.you could use:
JTee.scrollPathToVisible(path);
Where path is obtained in this way from a DefaultMutableTreeNode (TreeNode):
TreePath path = new TreePath(((DefaultMutableTreeNode)node).getPath());
I thought a good solution would be to trap any expand
or collapse events and for each either add or remove
the TreePath for the relevant node onto a List. When
the users refreshes the tree, I thought I could run
through the list and expand any TreeNodes I find. I
also found someone advocating such an approach in
another thread. BUT - it doesn't work for me When you perform a JTree.reload() call, it will collapse each node.
My advice is to call JTree.reload() and then call JTree.scrollPathToVisible(path) for each TreeNode previously expanded.
Hope this can help,
regards

Trouble with i810, vesa and fbdev being loaded

There are a few similar treads, but neither solves this problem. They are listed below:
http://bbs.archlinux.org/viewtopic.php?id=76933
http://bbs.archlinux.org/viewtopic.php?id=78686
http://bbs.archlinux.org/viewtopic.php?id=71622
I'm not using a xorg.conf, hal/dbus are running and I'm using the xf86-video-intel module. There are no other xf86-video-* modules present.
Below follows my xorg.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux svirfneblin 2.6.30-ARCH #1 SMP Tue Sep 8 01:42:10 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 8 12:43:46 2009
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a02:152d:0769 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a03:152d:0769 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0100000/1048576
(==) Using default built-in configuration (39 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default i810 Device 0"
Driver "i810"
EndSection
Section "Screen"
Identifier "Builtin Default i810 Screen 0"
Device "Builtin Default i810 Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default i810 Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 2.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(WW) Warning, couldn't open module i810
(II) UnloadModule: "i810"
(EE) Failed to load module "i810" (module does not exist, 0)
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event6"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "SHMConfig" "true"
(**) Option "MaxTapMove" "2000"
(**) Option "VertEdgeScroll" "true"
(**) Option "VertTwoFingerScroll" "true"
(**) Option "HorizTwoFingerScroll" "true"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(**) Option "CircularScrolling" "true"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event1"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) intel(0): EDID vendor "LPL", prod id 58112
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 58112
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 58112
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 58112
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
As you can see above it first loads the intel module and then goes on to try and load all the faulty ones. KDE still starts without any fuzz and I think gnome does too I am however trying to test XMonad out and it only goes into a black screen with a pointer, and when I terminate and it seems that this is to blame.
And when I terminate the Xmonad session with alt+shift+q xorg has outputted the following:
xauth: creating new authority file /home/vesz/.serverauth.1522
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux svirfneblin 2.6.30-ARCH #1 SMP Tue Sep 8 01:42:10 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 8 13:45:59 2009
(==) Using default built-in configuration (39 lines)
(EE) Failed to load module "i810" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be ignored in a future release.
FATAL: Module fbcon not found.
Setting master
waiting for X server to shut down Dropping master
Maybe fbcon to blame? or is that just something that is apart of fbdev. I am also using KMS with 'options i915 modeset=1' to get native resolution in console if that might have something to do with this.
Thanks, hope I didn't post too much worthless stuff
EDIT: This is the way xmonad works, I didn't load anything in config still I think all the failed module loads are rather annoying and would like to get rid of them if anyone knows how.
Last edited by vesz (2009-09-08 17:49:19)

What is on the command line for your kernel in your grub configuration file? (/boot/grub/menu.lst)
For Intel chips, when using mode setting and drm, Intel provides its own frame buffer that is not compatible with any other frame buffer (VGA, VESA, NG, etc...)
Do not specify any video settings on the kernel command line. No video=... , No VGA= ..., nothing.
After the kernel loads, the Intel frame buffer should start about the same time as the first kernel modules get loaded. There is a good article at http://wiki.archlinux.org/index.php/Intel_Graphics
If the frame buffer doesn't start, see the bit about Early Start.
Good Luck
Edit:
After reading your problem more closely, I may have misunderstood. The problem with the black screen after logout is not the fault of trying to load the other, non-existent drivers. It is due to a bug in KDM. The black screen does not occur with GDM. (Personal Aside:Unfortunately I cannot abide the look of GDM)
As a work around, edit /usr/share/config/kdm/kdmrc and find the block labeled :
[X-:*-Core]
and add a line that reads:
TerminateServer=true
The black screen is preceded by an xorg-crash. The terminate-server causes KDM to kill any existing server at log out and start anew (originally this was to manage memory leaks)
Last edited by ewaller (2009-09-10 06:29:36)

IMessage trouble with two iPhones and one Apple ID

Hi,
I'm having trouble with iMessage after updating both of my iPhones to iOS 6 and not being able to use iMessage with one of the phones.
Some background:
-I have two iPhones, one on AT&T in the U.S., and one on NTT DoCoMo in Japan, both with separate phone numbers, using the same Apple ID.
-The AT&T iPhone is a 4, the NTT is an unlocked 4S.
On my 4 (AT&T), on iMessage, I have the option to send/receive as my U.S. phone number and my Apple ID. Works just like before updating.
On my 4S (NTT), on iMessage, before I updated, I was able to send/receive using my Japanese number and Apple ID. After updating, I have the option to send/receive using my U.S. number and Apple ID. My Japanese number is greyed out and I cannot select it. When I turn on iMessage, it says "Waiting for activation..." and does not do anything. Turning iMessage off and on, some times I get an error message staying that activation cannot be completed.
I have rebooted the phone multiple times, turned on/off iMessage and FaceTime, turned the Set Date & Time Automatically option on/off, and reset Network settings several times. Nothing works; iMessage will not activate on my NTT 4S. Please help!

Finally resolved this issue after months of off and on troubleshooting.
I have no idea exactly which steps "fixed" the issue, but here's what I did. None of the basic troubleshooting steps that are on here worked for me, and this is including restoring both phones in iTunes as a "last resort" step that two Apple technical service representatives suggested.
I found a post on here from user "tungddao" who suggested:
"Turn on iMessage then make a phone call to : 011+445773142076
With Facetime & Siri: 011+447786205094"
I called both numbers with my NTT 4S, and both numbers hung up right away. I also texted both numbers, and the FaceTime one went through, while the iMessage number did not. I then checked my SMS blocking settings with NTT. There were no blocks, but I reset the settings to "unblock all" anyway.
I was able to activate iMessage and FaceTime with my Apple ID and my NTT phone number. Halfway there.
I then turned on my ATT 4, and while I could send/receive using my Apple ID and NTT phone number, the ATT number was greyed out, which was the opposite of what had happened before, when I could use the ATT number, but not the NTT one. On my NTT 4S, I could select my ATT number, but it was stuck on "verifying" for days, and I knew it wouldn't go through.
So, I signed out of my Apple ID on iMessage and FaceTime on my ATT 4, and turned both services off. I turned on data roaming, and turned off WiFi. *This step was key to activating both services, as they would not activate over WiFi for some reason.
I turned on iMessage and FaceTime without signing in to my Apple ID just yet. They both activated successfully, and then I signed into my Apple ID on both services, and from then on, I can use both numbers and my Apple ID on both phones! Finally!
These are my current options:
Phone 1 (4S on NTT): Phone 1's #, Phone 2's #, Apple ID
Phone 2 (4 on ATT, roaming here in Japan on Softbank): Phone 2's #, Phone 1's #, Apple ID
Hope this helps someone out there, as this issue was real frustrating for me.

Trouble with UTF-8 and PHP-OCI

Hi there!
I'm having some serious trouble with UTF-8. I just tried to insert a lambda into an NCLOB column in one of my databases and it was converted to an inverted question mark. I have verified that the string reaches my PHP script correctly encoded. Also selecting RAWTOHEX(column) in SQL Developer shows, that the inverted question mark is already stored in the column. So the problem must be somewhere between PHP-OCI and the database. Inserting a lambda via SQL developer works. I can also correctly fetch it via PHP.
I'm using the latest PHP-OCI (2.0.8). v$version says "Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production".
The database is fairly old and uses WE8MSWIN1252 as the character set and AL16UTF16 as the NCHAR character set. Hence I'm using NCLOB instead of CLOB. However, I connect to the database with AL32UTF8, since my app is running in UTF-8. I was under the impression that this would result in an automatic conversion from UTF-8 to UTF-16 when inserting into NCLOB columns, but apperently this is not the case. It looks like there is some sort of double conversion, first UTF-8 to WE8MSWIN1252 and then to UTF-16, because some non-ASCII characters like ä (a umlaut) get correctly converted from UTF-8 to UTF-16.
Any ideas? I'm at a loss here. Thanks in advance.

PHP OCI8 doesn't support NCLOB or NVARCHAR2.
See NCLOB support in OCI8

Trouble with bridge mode and port forwarding

I have a Westell Model 6100F DSL modem in bridge mode into my network and I'm having trouble forwarding ports. Is there any general guidance available to do this. I have set many of my friends networks up to allow port forwarding but all have been on other service providers, mainly cable. (my experience) My network is the only one I have had trouble with.
Basically, my question is, while in bridge mode, does the modem forward all incoming traffic to my NAT router or do I need to apply special port forwarding settings in the modem to allow this?
If bridge mode is the reason I cannot forward the ports, can someone explain how to set the WEstell 6100F back to factory defaults so I can start over.
Any other suggestions?
Thanks in advance.
Paul

If bridge mode is set up correctly, your router should be holding the Public IP address (basically not something that is a 192.168 address) as shown at http://www.whatismyip.com/ and compared against what IP your router has.
If your router has the public IP, all problems lie with either your router or your PC's firewall and configuration. I'd check out portforward.com for some guides on forwarding ports for your router or poarticular application if you need some additional help.
========
The first to bring me 1Gbps Fiber for $30/m wins!

I am postin a message but no one seems to answer it . Plse I am having trouble with adobe 5 and I wr

I am hjaving trouble with adobe 5 not compatable with my computer so how do I get rid of it and up grade to a newer verson, hopfully a free one

There is no application named Adobe 5, so you might have to provide the correct name for the application. If it happens to be Creative Suite 5 (CS5) there is a good chance it is compatible with your computer but you might have to install it in a compatibility mode. If you want to remove it you should first deactivate it. YOu might also do well to use the Creative Suite Cleaner Tool...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
As far as I know there are no free upgrades, especially if the reason would be lack of compatibility. It might be true if you were to have purchased one version when the next version was just about to be released, but CS5 is well beyond being considered for that. Software is not freely upgraded to match newer machines - that's part of life.
Just in case... if the lack of compatibility is due to your machine not meeting the tech specs of CS5, then it will most likely be true that your machine does not meet the tech specs of anything newer than that.

Trouble with JTree's and autmoatically expanding nodes

Similar Messages

Maybe you are looking for