Troubles importing a change request

Hi experts,
Does anybody know how to import a local change Request into another system, in this case my QAS?
I was applying the following OSS notes:
1082441 Mexico Legal change Format-A29 SAPKH50020 12/02/2008
1111107 RFIDMXFORMAT29: Country name not displayed in file
output. SAPKH50020 22/11/2007
1257591 Corrections to the RFIDMXFORMAT29 report SAPKH50021 02/03/2009
1274856 General Corrections to the DIOT report Mexico SAPKH50021 02/03/2009
1312491 DIOT report - File downloading in background mode SAPKH50021 03/03/2009
1314174 Documents with multiple tax codes not shown properly X 13/03/2009
But I do not know why this notes when I released the corresponding transports are released as local change requests, but then when I try to import them to my QAS system but I get the following error:
Error code 0247
Error : addtobuffer has problems with data- and/or cofile
Can anybody help please?
Best Regards,
Erik Espinosa

Hi Erik
go to Al11 on your QAS System. check the value of parameter DIR_TRANS and see that your data and cofiles for the TR Request exists on the same path.
This problem can also arise if there is some problem with the data/cofile, may be they are corrupt. try creating another test request.
when calling tp you need to specify a parameter file which contains  tp specific statements. Usually this file can be found in  /usr/sap/trans/bin. In former times it was called  TPPARAM; at your system it may have the name TP_DOMAIN_LNX.PFL. This file can be created using transaction STMS ("system overview" -> double click on LNX -> choose  "Transport tool" -> check and save the parameter).
Hereafter you should be able to execute tp calls by adding the parameter pf=/usr/sap/trans/bin/TP_DOMAIN_LNX.PFL
Also, you can try executing the command below
ln -s TP_DOMAIN_LNX.PFL TPPARAM* in /usr/sap/trans/bin
I hope this helps
Regards
Chen

Similar Messages

  • How can I import a change request to a system which is not in the domain

    how can I import a change request into a system which is not part of the transport domain?

    Hi,
    You can transport any requests to any systems even though they are not in the transport domain.
    1) Move the corresponding data & cofiles( in /usr/sap/trans/data & /usr/sap/trans/cofiles directories) to the same location in the target system.
    2)Add the request to the queue from  STMS ->Import Queue ->Extras ->Other Requests - >Add.
    3)The execute the transport as usual.
    Regards,
    Sam

  • Why import of change request in production takes more time than quality?

    Hello All,
                 why import of change request in production takes more time than import into quality?

    Hi jahangeer,
    I believe it takes same time to import a request in both quality and production as they will be in sync.
    Even then if it takes more time in production that may depend on the change request.
    Thanks
    Pavan

  • How to import a Change request from One application to another application.

    Hi,
      In SRM Dev system I have created a Change request (Transport Request) and released to the QA system.The Change request has imported successfully to the SRM QA system.
    Now the Case is:
    The Released Request in the SRM Dev system has to be Export to the CRM Dev system.
    Is it possible to Export the Released Change Request from SRM system to CRM system?
    If possible then can you provide me with the solution.
    Thanks in Advance
    Dharma

    Hi,
    Your system admin knows how to do it. System admin should define transport route. Please check it in transaction STMS.
    Regards,
    Masa

  • Trouble importing since changing iTunes folder destination

    Hi,
    I have asked everyone I know about this problem and nobody seems to know what to do, please help...
    I previously ran iTunes on my PC Laptop using an external hard drive to store all my music on and thus had the itunes music folder destination set to the hard drive.
    Since the laptop died, I now have a macbook and got a new ipod to start over. The external hard drive with all my music works ok with the macbook.
    I initially imported a couple of CDs into my itunes straight onto the macbook when the ext drive was playing up and i was desperate for some music for my ipod, once i got the hard drive working again i hooked it up and changed the itunes music destination folder to the hard drive and left it transferring my entire library back into itunes overnight.
    This worked fine but now itunes wont let me import cds with the destination set to the hard drive (yes, the hard drive is on and connected when attempting this).
    Sorry this is such an essay but i didnt know how else to explain the problem.
    Anyone have any ideas? I am becoming desperate.
    Thanks
    Tom

    Change the location of the library in the Preferences. This tells iTunes where new music that you add will go, but it won't move your existing music there.
    Back in iTunes, use the Consolidate Library option. This will copy all the music currently in iTunes to the new Library location, along with organizing it and renaming it and such. Once this is done, you can check that the music is there, and then delete the old location.
    Few things:
    -There's a couple of files that live in My Music\iTunes. These are an ITL and an XML file. These cannot be moved. They contain all the information about what's in your iTunes library.
    -If you still want to move them, use TweakUI to change the location of your My Music folder to somewhere that won't get copied to the server. Then move/copy the library files to that new location.

  • Return code : 12 while transporting change request

    Hi,
    When i tryin to import a change request i am gettin a return code:12....i tried re-configuring STMS  on my stand alone PC still no hope.
    Can u plz help me wt actions can b performed.
    Thanks and Regards,
    Malti

    Hello Malti,
    Return code 12 usually means the transport tool problem. You can start with updating the TP and R3trans with the latest patch on the SAP Service Market.
    Regards,
    Joe

  • Re:Error while importing the TP from dev to quality through change request

    Hi Guys,
    We have implemented change request and upgraded for SP 15 support pack
    when the user tries to import through urgent correction by selecting pass correction to test the TP is not getting imported, when i checked the log it is saying
    System cancel RFC destination SM_BQ2CLNT100_TRUSTED, Call TMW_SET_PROJECT_SWITCHES: No authorization to logon as trusted system (Trust ed RC=2).
    You cannot import any requests for project BD2_P00001 at the moment
    Then i went to show project status switches and changed as "Request can be imported" from " request cannot be imported", then the user is able to import the UC from the task list,
    But ideally the status switches should be " request cannot be imported" so that the TP can be imported only through change request.
    kindly give ur inputs as it is very urgent.
    Regards
    Raju

    Hi Jith,
    First of all try to consolidate all your objects in a single TR and then move to Q from D.
    In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
    Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
    1. Go to your transport Logs and then to the entries marked as Error.
    2. There you will find the Query Element Ids, copy them
    3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
    Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

  • Having trouble importing select pictures from a cd to my iphoto library

    I am having trouble importing (and viewing) my vacation photos from a cd to my iphoto library. Some of the photos I can view in finder, but when i click on the rest, I get a message that says "Item xxxx.jpg is used by mac os x and cannot be opened". When I tried to import the photos to my library... the ones I could view imported no problem, the ones I couldn't view will not import and I get a message saying "unreadable files: the following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)". I am just sick that I cannot find these photos!!! =( especially since I had them on iphoto before I cleaned out my computer (so I've had them in my library before). Any ideas? I am in desperate need of help! =(
    P.S. When I try to move the pictures to my desktop, I get a notice that says, "you may need to enter the name and pasword for the administrator on this computer to change the item named xxxx.jpg"... when I click continue, another message pops up and says, "the item xxx.jpg contains one or more busy items that cannot be changed"

    Welcome to the Apple Discussions. What do you have set in the System/CDs and DVDs preferences to do when a disk is inserted? If the option is not set to the Finder do so and see if that will make any difference.
    Otherwise boot into Safe Mode and see if you can copy the files from the CD to a folder on the Desktop. Boot back into your normal account and see if you can import. Or import while still in the Safe Mode.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM ea, 250G HD; G4 Dual 1Ghz, 1.5G RAM;   Mac OS X (10.4.10)   22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

  • Trouble importing contacts from a tab-delimited file into Contacts on 10.9.5

    I am having Trouble importing contacts from a tab-delimited file into Contacts on MacBook Pro, OS 10.9.5, Intel 2.4 GHz Core 2 Duo., 400GB drive, 4GB memory DDR3
    So far I have:
    - Followed closely the help screen in Contacts app
    - Modified my source document meticulously - first in MS Word, then copied and tweaked in Apple's "Text Edit" app
    - The problem arises when I go to access the document for import.  Specifically, the target document, and all others in that file, are "greyed out" and thus can't be "opened" to facilitate the import process
    - Tried changing the extension of the document name to ".txt", ".rtf", and ".rtd". No change or improvement.
    - Searched Apple.com/help and found nothing relevant
    Can anyone offer some advice or tell me what I may be overlooking in this process?
    Any help will be greatly appreciated!
    Thanks,
    <Email Edited By Host>

    Hi Rammohan,
    Thanks for the effort!
    But I don't need to use GUI upload because my functionality does not require to fetch data from presentation server.
    Moreover, the split command advised by you contains separate fields...f1, f2, f3... and I cannot use it because I have 164 fields.  I will have to split into 164 fields and assign the values back to 164 fields in the work area/header line.
    Moreover I have about 10 such work areas.  so the effort would be ten times the above effort! I want to avoid this! Please help!
    I would be very grateful if you could provide an alternative solution.
    Thanks once again,
    Best Regards,
    Vinod.V

  • Local Change Request created in PRODUCTION needs to be moved to SANDBOX

    I need to transport a request from Production (BWP) to a sandbox system (BS1), but when I create the transport it is created as a Local Change Request. How can I change it to a transportable request? I've checked the development class and it is correct. The package is ZBW and the transport layer is ZBD1. Please help.

    Adding further to Santosh's suggestion....
    Creating the transport of copies is the easiest option..if this is a one time activity...
    Once the the objects are included from the Local change request to the transport of copies...release this...
    Then move the tranport files at the OS level to the import queue of the Sandbox system....then in STMS of the SANDBOX..attach these file to the queue and then import it....
    Thanks.

  • Trouble Importing Files PSE 7 to Windows 7 (32 bit)

    I am attempting to install PSE 7 into a computer running Windows 7, 32 bit.
    The installation was a success to the extent that I was able to connect a catalog containing a huge amount of photos, (180,000 +) to the organizer, and after several hours of "generating thumbnails" the installation seemed to have stabilized.
    However, when I try to import new photos, the "get photos from files and folders" operation takes ridiculous amounts of time, and is sort of "hit or miss" in that it sometimes it hangs altogether and I have to use "task manager" to shut down PSE.
    Other than this, the program seems to be working normally (!) or maybe (?)
    I have tried various compatibility modes, (XP SP2, Vista, Vista SP 1 & 2) with very little difference in results. Well, maybe Vista SP 2 was a tiny bit better.
    The computer this is installed in is a Pentium C2D 2.8Ghz (E6300) w/ 2 GB of DDR2 800Mhz RAM. So, it's got plenty of "juice" to deal with PSE's requirements.
    My photo files are stored in folders & sub-folders on a separate internal HDD (750GB WD).
    Both PSE 5 and 7 work on 3 other computers containing the identical catalogs and photos, in basically the same configuration, including separate storage drives for each. These machines are running Windows XP SPs 2 or 3 (I use multiple computers as a back up strategy, copying the entire existing HDD to another, then install the drive into another machine, import the catalog file into PSE, and change the HDD letter to match that of the existing catalog). Done this way, the PSE installation is identical to that in the previous machine, and is up and running rapidly.
    launching such  a large catalog takes a bit of time to initialize, or search (understandably), but on these other machines there is no trouble importing, locating, or managing files.
    I should add that on the Windows 7 machine, Windows Explorer works quite well in accessing all of the photo files, so this sort of rules out a problematic Hard drive.
    Any ideas would be greatly appreciated.

    Mr. Ellis, PSE 7 is simply not permitting me to drag folders from Windows Explorer into the organizer. It just blows up the dreaded "black circle with diagonal slash", and that's the end of the issue, at least as far as PSE 7 is concerned.
    Since I've had to terminate this program abnormally several times, it resets the preferences upon restart. The other day it hung when I was trying to set preferences, so as you might expect, I'm very cautious about making changes. I don't know if changing any preferences would enable drag and drop, I'm just trying to illuminate the eggshells I'm walking in trying to stabilize the program.
    In answer to your question, about the "documents and settings folder", no, I'm not using in any of my photo file paths. I realize I may have confused the issue with that statement, it was out of context. But my purpose in doing so was to obviate the differences in file paths that PSE is expecting, and the file paths that I'm using. Perhaps that was a bad example.
    I almost never use either the "My Documents" or the My Pictures" folders in Windows, nor do I allow PSE to use them. Storing data of any kind on the OS drive (C:/) is not in my repertoire of "stupid things I like to do, even if they're destined to end badly".
    All of my computers have a minimum of 2 physical HDDs, not partitions. All video, music, photos, program installer files, etc. are stored on a discreet, separate, HDDs, (identified in "My Computer" as, (IE) " G: Volume")). The "C:/" drives are exclusively for Windows and installed programs.
    That said, a typical file path to a group of photos in my computer would be, "My Computer" > "G:/ Volume" > "My Digital Photos" > "Airshows" > "McGuire AFB 2007" (In case you're wondering, I'm way too lazy to go through that each time, so I add desktop shortcuts to the extra HDDs and even the largest folders).
    As you are well aware, that is completely different from the file path that PSE would choose by default. A file path for which I have a great deal of disdain. But, that is another complicated and contentious issue, which doesn't have a clear winner thus far.
    Anyhoo, I think that PSE would "appear" more compatible (and probably is )with Windows 7 if it were allowed to follow it's own choices as to where to store the photo files. One supposes the folders that Windows 7 "creates" for earlier programs further aids (supposed) compatibility.
    As I mentioned in one of my other somewhat long winded posts, I now have a viable option for importing photos, "find photos by searching", the manual drill down modus operandi. Works great!
    I'm not expecting this installation of PSE to do any, "heavy lifting" with respect to editing, or a resting place for un-backed up photos . It's in a new machine I just built for the primary purpose of, extra backup,  recording TV, and perhaps installing a Bluray drive. The motherboard has HDMI output, so it plugs into the TV directly, and the PSE slideshow function works perfectly.  With a 40" TV, it's even better than a slide projector for boring relatives with vacation photos!
    So, although this thread is still marked as "unanswered", I do have a workaround solution. There should be a check box indicating, "it won't ever be answered until Adobe issues a patch"! (Like that's going to happen).
    Again Mr. Ellis, thank you very much for your interest in this issue. I might add that I have read your page on problems with PSE and it's obvious that you have applied a great deal of thought, effort, experience, and industry toward helping people deal with PSE more effectively.
    As an afterthought I have several copies of PSE laying around, 2,3,5, & 7, (some in multiples) and I've never had a serious problem with any of them. So I'm actually astounded when I see the litany of issues that apparently manifest themselves. This is my first actual issue, and Windows 7 is pretty upfront about PSE 7 being an incompatible application.

  • Trouble importing font

    Hi. Having trouble importing a font -- universe to be specific. I brought it into Font Book and it's working in Pages. But when I select it in Final Cut, I get a bold, italicized text. It doesn't change -- it's bold and italicized -- no matter what style I choose (plain/bold/italic/bold-italic).
    Any ideas on how to fix this?

    6.0.6.
    False alarm -- the font works fine in the video panel of the viewer. It's only slanted and bold in the control panel.
    Thanks for the help.

  • Change Request Flow In a Three System Landscape --- PLZ DO REPLY

    Hi Experts,
    I am new to SAP and have this doubt;
    Suppose we have a three system landscape with DEV, QTY and PRD systems in it.
    Say we create a new change request in DEV system. So to transport it to QTY we will release that request from DEV using T code se01 .
    Now the request will come in QTY systems queue and we will login to the appropriate QTY client and import this request into the QTY system.
    <b>No my basic doubt is, after the testing in QTY how do we move this request to PRD system ?</b>
    Do we again release this request from QTY system using se01 or we need to go at the OS level in the QTY system and manually add this change request in the PRD system buffer ? ( Please send if any reference link is there)
    I will really appreciate any info in this regard.
    Thanks in advance.
    Regards,
    Mandeep

    Hai Mandeep,
        First Thing,
        -->If you are maintaining a common transport directory,the released change
           request will be exported in that common transport directory..
        --->Now you just enter in to the server(which is Transport Domain
            Controller).
        --->In that go to Import Overview,now your QA server has one import req.
            you just click the req. and import that req..
    >Now if you want to import the same req int o PRD.,Enter in to PRD
             server.Go to tcode STMS_IMPORT, In the top go to
               Extras>Other req.>add..click this and add that particular 
             req.that you want to import in to PRD server..
        --->select that req and import that req...
    Thanks & Regards,
    Gopinathan.T

  • Dependency Information for Transport Requests in Change Request Management

    If two CTS projects are not assigned to SOLMAN projects, it is possible to define a dependency successor/predecessor relation between two transport requests for the import order. For example I can state that I have to import TR 1 only after the TR 2.
    When the CTS projects are assigned to SOLMAN projects, even though you have defined the dependency relation, this is not respected and from the Change Documents you can perform the import in the order you want.
    How can I activate this check also in Change Request Management?
    Thanks
    Antonello

    Some things you could take a look on:
    1) start report /TMWFLOW/CONFIG_SERVICES --> here you can define system, client and project specific locks.
    2) Transaction /TMWFLOW/CMSCONF --> also some options for locks and definition of critical objects
    3) Transaction /TMWFLOW/LOCKMON --> monitor screen for locked objects and requests.
    This is actually not the same functionality as have it in CTS projects directly especially as the locks are removed once a request is removed. The most important thing is still missing here (or at least I haven't found a way to activate): sequence control when importing requests out of parallel projects into production (to prevent downgrading). 
    Best Regards,
    Andy

  • Change Request Management--Create Transport Request from Service Desk

    Hi Experts,
    What are the right steps to create a change request via service desk message and keep following the process until import to PRD.
    Regards.

    Hello Jorge,
    You can create Change Request using two ways.
    You can create a Change Request from a Service Desk Message using the action "Create Change Request" or you can create a Change Request directly in transaction CRMD_ORDER.
    Please, check the links below where you can find more information about Charm.
    /people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    Best Regards,
    Diego Fischer,

Maybe you are looking for