Trying to connect to oracle 11gr2 from excel
How can I connect from excel to oracle 11g like in version 10 that we used to do it with an odbc, I couldn´t find the driver alone, I only find an ODTwithODA.... package that has many other utilities.
You need an Oracle client installation of some type. That package is one, and there's others available. That one does contain what you need, and some other stuff you don't care about. It's probably the easiest one to use in terms of getting up and running quickly.
Similar Messages
-
Could not connect to Oracle database from excel macro. Getting connection not open.
Hi all,
I could not connect to oracle database using excel macro. After much R&D also, I cannot find right solution. Please help me where I am doing wrong.
Sub Button2_Click()
Dim Conn As New ADODB.Connection
Dim RS As New ADODB.Recordset
Dim Cmd As New ADODB.Command
Dim sqlText As String
Dim Row As Long
Dim Findex As Long
Dim Data As Worksheet
Dim X As Long
Dim UID As String
Dim PWD As String
Dim Server As String
Dim strCon As String
Application.Calculation = xlCalculationManual
UID = "myUserid" 'Enter the User ID
PWD = "myPassword" 'Enter the password
Server = "myHostname or myServername"
Set Data = Sheets("Sheet2")
Data.Select
Range("A:J").ClearContents
strCon1 = "Provider = Microsoft.ACE.OLEDB.12.0;DATA SOURCE=myHostName;Database=myDBname;uid=myUserid;pwd=myPassword;"
Conn.Open (strCon1)
Cmd.ActiveConnection = Conn
Cmd.CommandType = adCmdText
' Put your query next
sqlText = " select * from table "
Cmd.CommandText = sqlText
Set RS = Cmd.Execute
For X = 0 To 17
Data.Cells(1, X + 1) = RS.Fields(X).Name
Next
Do While Not RS.EOF 'this loops through the data and puts it in the spreadsheet
Row = Row + 1
For Findex = 0 To RS.Fields.Count - 1
Data.Cells(Row + 1, Findex + 1) = RS.Fields(Findex).Value
Next Findex
RS.MoveNext
Loop
Application.Calculation = xlCalculationAutomatic
Application.Calculate
End Sub
sammyI have set oci.dll in to the path specified. Prior to this I musy say that, I have 64 bit excel 2010 & installed respective drivers from the link provided http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
But
still I am facing as:-" Provider cannot be found. It may not be properly installed."
sammy -
How to connect to Oracle 11gR2 from CF9
Hi,
how to connect to Oracle 11gR2 64 bit Database from CF9?
In CF Administrator no Oracle Driver is available.
Do I have to install Oracle Client Software on Server Hardware where CF9 Server is installed?
If yes, is Oracle Instant Client is enough or do I have to install full oracle client?
Any idea?
regards ClaudiaExcellent, glad to hear it's sorted. Just be careful if you use any of the "advanced" features such as returning querysets from stored procedures or BLOBs, apparently there are differences between the JDBC and full DataDirect drivers in those cases.
However in 99% of cases you won't notice the difference. -
Error while connecting to Oracle 8 from PI 7.1
I am trying the connect oracel 8.0 from PI 7.1,
I am getting following error in communication channel monitoring
"Exception caught during JDBC adapter processing: java.lang.NullPointerException "
at the same time I can connect to oracle 10g smoothly without any error.
Please suggest what would be the reason.
regards,Hi Check this thread
same problem disueed here & solved
Error in Sender JDBC communication channel
Regards
Abhishek -
Trying to connect to oracle 8i
trying to connect to oracle 8i.i have the oracle driver dnlded from oracle website.when i try to make a new connection i get the following error during runtime:
java.lang.UnsatisfiedLinkError: G:\Oracle\Ora81\BIN\ocijdbc8.dll: One of the library files needed to run this application cannot be found
at ....
the file ocijdbc8.dll is in the specified directory.
plz help.Hi,
how do you want to connect to the Oracle DB?
Using a JDBC-driver?
I haven't tried it on 8i, but
maybe this code will help you to connect to a oracle DB vie JDBC.
You need the driver (normally its a zip-file, that you must include
in your classpath)
this look like this when compiling:
javac -classpath ".;..;./jdbc80520-nt/classes111.zip" Test.java
When starting the programm the file should be also included in the classpath.
Here a little example-programm:
import java.sql.*;
import java.util.*;
class Test {
// Here insert your server, the port and the dsn-name
String dsnName = "jdbc:oracle:thin:@<Server>:<Port>:<DSN-Name>";
// Here insert your username
String userName = "<username>";
// Here insert your password
String password = "<password>";
Connection jdbc = null;
public Test() {
try {
// Open Connection
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
connection =
java.sql.DriverManager.getConnection(conURL, userName, password);
System.out.println("Opened connection");
// Do something
// closing connection
connection.close();
System.out.println("Connection terminated");
} catch (Exception exc) {
exc.printStackTrace();
try {
connection.close();
System.out.println("Connection terminated with Exception");
} catch (SQLException exc) {}
public static void main(String[] args) {
Test t = new Test();
}Maybe it helps you.
Ciao Nies -
"stack overflow" when trying to connect with Oracle ODBC
Hi,
I'm trying to connect to Oracle DB (8.1.7.3.0) from WinNT 4.0 SP6 with Oracle ODBC driver 8.0.6.6.0. I've been trying to connect with "Oracle ODBC Test" and with "MS Query". In either way I end up with Dr. Watson reporting about "stack overflow". Before starting to upgrade ODBC driver I wanted to ask - should these versions of driver and DB work together at all (even unofficially)? Or may I be missing some other thing? Any hints, ideas are welcome.
Regards,
Madis PriilinnThank You for replying, Justin!
Yes, I can connect successfully to the database through other tools - at the moment I tried SQL*Plus, Net8 Easy Config and Schema Manager.
The Oracle client in the NT machine is 8.0.5.0.0. And unfortunately I do not know anything about the Oracle installation on this machine and at the moment I don't have that person near me too whom to ask also. But I think the installation was ok, because the connection through ODBC was working before the DB upgrade as far as I understood (sorry, again at the moment I don't know what was the previous version of DB. I will ask that information as soon as possible).
The main problem that bothers me at the moment is that I can't install 8.1.* series OraODBC driver with 8.0.5.0.0 Oracle Installer. I managed to install 8.0.6.6.0 version of the driver, but not the newer ones. As far as I've understood I have to upgrade the whole Oracle in the NT machine to upgrade that installer. Am I correct?
Regards,
Madis Priilinn -
Not able to connect to Oracle EBS from host Windows 7
Hi, I have installed oracle EBS version 12.1.1 (32 bit) on OEL ver 6.3 (32 bit). I have installed Linux on Oracle VM virtualbox ver 4.1.16.
I am having host OS as Windows 7 home on my laptop.
While setting up the Network in Oracle VM virtualbox, I have set "attached to" as 'Host Only Adapter'.
I am able to connect to oracle EBS from the client server(linux) using Firefox browser. Both the services(database, Application) are starting & stopping without any problem.
I have entered following setting in C:\Windows\System32\drivers\etc\hosts file.
192.168.56.101 linux.server
IP address of Linux OS is 192.168.56.101
Please help in resolving the issue.
Thanks!I am getting error as "Internet Explorer cannot display the webpage" on IE ver 9, when accessing from host machine. On Firefox (ver 12), the error is coming as "The connection has timed out. The server at linux.server is taking too long to respond."
The firewall on the server has been disabled already.
I am not able to ping the server IP address or hostname.domainname from client. Following error comes while pinging -
C:\>ping 192.168.56.101
Pinging 192.168.56.101 with 32 bytes of data:
Reply from 172.31.3.110: Destination host unreachable.
Reply from 172.31.3.110: Destination host unreachable.
Reply from 172.31.3.110: Destination host unreachable.
Reply from 172.31.3.110: Destination host unreachable.
Ping statistics for 192.168.56.101:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
C:\>
Server Machine IP address -
[Oracle@linux ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:8D:FE:FA
inet addr:192.168.56.101 Bcast:192.168.56.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe8d:fefa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:125 errors:0 dropped:0 overruns:0 frame:0
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:17700 (17.2 KiB) TX bytes:5541 (5.4 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:54823 errors:0 dropped:0 overruns:0 frame:0
TX packets:54823 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:17464908 (16.6 MiB) TX bytes:17464908 (16.6 MiB)
[Oracle@linux ~]$
Following is the content of server hosts file(etc/hosts) -
127.0.0.1 linux.server linux
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
Thanks! -
How to connect to Oracle database from webdynprojava application
Hi
How to connect to Oracle database from webdynprojava application. where can we provide the code to connect to database.?
Thank You.Hi,
You need to create Java Bean model. The bean is a typical java bean with default constructor, getter and setter. You can have additional methods for query etc. The attributes in the class will be your model node and attributes.
However you need to configure the connection and create JNDI using visual administrator before writing the code.
You can also consider writing Session EJB with oracle and using them in WD.
http://help.sap.com/saphelp_nwce10/helpdata/en/45/dcaa4f05535591e10000000a1553f7/frameset.htm
Srini -
How to connect to oracle database from visual basic 2010 express edition
I have installed visual basic 2010 express edition on windows xp. But visual basic 2010 express edition supports Microsoft sql server database file,Microsoft sql server compact 3.5, Microsoft access database file. I want to connect to oracle database from visual basic 2010 express edition. So what drivers are required and how to do connectivity?
Hello,
I wasn't clear on what you were using to make the connection. I had a look in Visual Studio 2010 (don't have express to test sorry).
I think you mean the Data Sources available under the menu Data-> Datasources. this seems to match the description you give when I
look at the list of datasource options.
In here you can make ODBC connections via the Microsoft .net Data Provider .
If you select ODBC as a datasource you can see listed the DSN's you created - for example I see 2 which use the Oracle ODBC driver.
This assumes you installed an Oracle Client + the oracle version of the ODBC driver (comes with the oracle client).
Once you created a server connection then you should see it in the server explorer.
You can also download the Oracle Developer Tools for Visual Studio which is an add on for VS.
** I suspect this is only for VS 2010 and I didn't see that Express was supported.
http://www.oracle.com/technetwork/developer-tools/visual-studio/overview/index-097110.html
Let me know if that helps.
John -
Oracle 11gR2 froms and reports And weblogic 11g
Hi,
I am new to Weblogic,we are using Oracle 11gR2 froms and reports and weblogic 11g. How can I deployee my reports in weblogic and where and what is the procedure.
thank you.Its custom reports or standard ones?
If custom then are you developed as application? -
ORA-12154 error when trying to connect to Oracle 11g DB from Excel 2010
All,
I am trying to set up Excel 2010 64-bit to connect to an Oracle 11g database, but am having some trouble due to an "ORA-12154 could not resolve the connect identifier specified" error. I am able to TNSping the SID name, as well as connect to SQLplus. The TNS entry works, and the Oracle Home is in the right spot. I am even able to put the full connection string in the "Data Source" field when creating a data link in Excel and have it connect to the DB. But I would like to be able to create one that used the SID rather than the full connection string, as other users will have to use this. The developer behind the Excel solution created a number of .odc files to connect to various databases, so this gives extra weight behind figuring out how to connect via a SID rather than a full connection string. Any suggestions?user10832104 wrote:
All,
I am trying to set up Excel 2010 64-bit to connect to an Oracle 11g database, but am having some trouble due to an "ORA-12154 could not resolve the connect identifier specified" error. I am able to TNSping the SID name, as well as connect to SQLplus. The TNS entry works, and the Oracle Home is in the right spot. I am even able to put the full connection string in the "Data Source" field when creating a data link in Excel and have it connect to the DB. But I would like to be able to create one that used the SID rather than the full connection string, as other users will have to use this. The developer behind the Excel solution created a number of .odc files to connect to various databases, so this gives extra weight behind figuring out how to connect via a SID rather than a full connection string. Any suggestions?
If you are able to connect with sqlplus, then this really becomes a question of how to define a data connection in Excel.
But after quickly googling ..
In excel ...
"Data" tab
"from other sources"
"from data connection wizard"
select ODBC DSN
On data link properties, select the "connection" tab
select "Use Data Source Name" and hit the drop-down
select a dsn that you had previously set up to point to the oracle database.
Anyway, that looks like how it is supposed to be done. I'm getting a dll initialization error. Probably due to the fact I have both 32-bit and 64-bit oracle clients, and windows never handles that very gracefully. But then Windows never graceffully handles anything that isn't MicroSoft. To paraphrase Forest Gump, "My momma always said Windows was like a box of chocolates. You never know what you're going to get."
In any event, the error you report means it was actually tying to look it up in tnsnames, but what you supplied wasn't found there. That can also be a big issue when dealing with MS products, because they don't use the same terminology, so lead people into entering something other than what Oracle expects. Are you referencing an ODBC DSN? If so, have you tested that apart from Excel? -
Cannot connect to Oracle 11gR2 database from SQL Server 2005
Both SQL Server (Windows) and Oracle (Linux) are in 64bit environments.
I have done the following on a Windows 2008 R2 with SQL Server 2005:
Install InstantClient from Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (x64) to C:\Oracle
Install oledb from 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 by executing install.bat oledb c:\oracle odac
Note: Not sure whether 11.2.0.2.1 version of ODAC will cause any problem since I cannot find 11.2.0.1.0 version.
I have checked the Allow inprocess of OraOLEDB.Oracle provider in SSMS.
I have executed sp_addlinkedserver @server = 'ORACLE_TEST', @srvproduct = 'Oracle', @provider = 'OraOLEDB.Oracle', @datasrc = '##.##.##.##:1521/TEST'
The ##.##.##.## is the ip address of the Linux server which has the Oracle 11gR2 database TEST.
I have executed sp_addlinkedsrvlogin @rmtsrvname = 'ORACLE_TEST', @useself = 'FALSE', @rmtuser = 'xxxx', @rmtpassword = 'yyyy'
The xxxx is the oracle username and yyyy is the password for the oracle user xxxx.
I know the oracle database TEST is up since I have setup connection in Oracle SQL Developer having:
##.##.##.## as the hostname
1521 as the Port
xxxx as the username
yyyy as the password
TEST as the service name
When I click Test Connection for the linked server ORACLE_TEST in SSMS, it just hang.
When I issue a query like select count(*) from oracle_test..xxxx.table1, it just run forever. I'm not so sure how to query an oracle table. I have also tried select count(*) from oracle_test.xxxx.xxxx.table1.
When I retype the password in the Linked Server Properties, it just run forever.
Do I need to create a tnsnames.ora on the Windows machine?
Do I need to change the tnsnames.ora on Linux machine?
I'm very new to Oracle.This forum is dealing with connections from an Oracle database to SQL Server - so the Oracle database is the driving site and this is the way round from your linked server set up.
As you're suing the instant client you might post your issue in the instant client forum:
Instant Client -
How to Connect Oracle database from excel
I have installed oracle 11g on Windows 8 64 bit OS on my laptop. I have Microsoft excel 2013. I can connect to database from SQL and from TOAD. Now i want - from excel to connect to database.
Please guide me the steps.
ThanksBelow link may be helpful to you :
http://khalidali-oracledba.blogspot.in/2013/09/connection-between-ms-excel-to-oracle.html
And if you are getting 32 bit vs 64 bit ODBC driver issue then :
https://social.technet.microsoft.com/Forums/office/en-US/2234554e-e93c-438b-990a-6739df19da44/odbc-connection-problem-in-excel-2013-64-bit-windows-8-os-and-x64-processor-oracle-8i?forum=excel
And still you are not able then post the question in :
ODBC
Regards
Girish Sharma -
While trying to connect to Oracle database 11g from SQL developer (Error)
Hi Guys,
Installed OIM in virtual machine with Windows 2008 and when trying to connect to Database after completing installation receiving with Error ' No more data to read from socket'
Vendor code : 17410. can anybody give suggestion on this.
thanks
sri485.yes i tried connecting DB directly its working fine and i tried select * from DUAL it displays 2 . VMware with OIM working fine in my system and when i copied the same VMWARE file to other system and i tried running OIM and connecting to DB it not working.
log trace:
<Aug 21, 2012 2:28:56 PM BST> <Warning> <DeploymentService> <BEA-290014> <Inval
d user name or password.>
<Aug 21, 2012 2:28:58 PM BST> <Error> <OIM Authenticator> <BEA-000000> <Error s
tting SQL Hint java.sql.SQLException: Unable to start the Universal Connection
ool: oracle.ucp.UniversalConnectionPoolException: Error during pool creation in
Universal Connection Pool Manager MBean: oracle.ucp.UniversalConnectionPoolExce
tion: Error during pool creation in Universal Connection Pool Manager: oracle.u
p.UniversalConnectionPoolException: Universal Connection Pool already exists in
the Universal Connection Pool Manager. Universal Connection Pool cannot be adde
to the Universal Connection Pool Manager>
java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.uc
.UniversalConnectionPoolException: Error during pool creation in Universal Conn
ction Pool Manager MBean: oracle.ucp.UniversalConnectionPoolException: Error du
ing pool creation in Universal Connection Pool Manager: oracle.ucp.UniversalCon
ectionPoolException: Universal Connection Pool already exists in the Universal
onnection Pool Manager. Universal Connection Pool cannot be added to the Univer
al Connection Pool Manager
at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java
488)
at oracle.ucp.util.UCPErrorHandler.throwSQLException(UCPErrorHandler.ja
a:163)
at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java
651)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.
ava:890)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.
ava:857)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.
ava:851)
at oracle.iam.platform.auth.impl.DBStore.getConnection(DBStore.java:130
at oracle.iam.platform.auth.impl.DBStore.setSQLHint(DBStore.java:107)
at oracle.iam.platform.auth.impl.DBStore.<init>(DBStore.java:62)
at oracle.iam.platform.auth.impl.DBStore.getInstance(DBStore.java:83)
at oracle.iam.platform.auth.impl.Authenticator.<init>(Authenticator.jav
:87)
at oracle.iam.platform.auth.impl.Authenticator.getInstance(Authenticato
.java:71)
at oracle.iam.platform.auth.providers.wls.OIMAuthLoginModule.login(OIMA
thLoginModule.java:43)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(Lo
inModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(Lo
inModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcce
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:
86)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:
80)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(
AASLoginServiceImpl.java:113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcce
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHand
er.invoke(Delegator.java:57)
at $Proxy25.login(Unknown Source)
at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceIm
l.login(WLSJAASLoginServiceImpl.java:89)
at com.bea.common.security.internal.service.JAASAuthenticationServiceIm
l.authenticate(JAASAuthenticationServiceImpl.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcce
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHand
er.invoke(Delegator.java:57)
at $Proxy43.authenticate(Unknown Source)
at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authen
icate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic.security.service.PrincipalAuthenticator.authenticate(Princi
alAuthenticator.java:348)
at weblogic.security.service.PrincipalAuthenticator.authenticate(Princi
alAuthenticator.java:355)
at weblogic.management.servlet.BootstrapServlet$1.run(BootstrapServlet.
ava:169)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticat
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java
146)
at weblogic.management.servlet.BootstrapServlet.processGet(BootstrapSer
let.java:119)
at weblogic.management.servlet.BootstrapServlet.doGet(BootstrapServlet.
ava:108)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.ru
(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecur
tyHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.ja
a:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.ja
a:183)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
n.wrapRun(WebAppServletContext.java:3717)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
n.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticat
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java
120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebApp
ervletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServlet
ontext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.
ava:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.ucp.UniversalConnectionPoolException: Error during pool creat
on in Universal Connection Pool Manager MBean: oracle.ucp.UniversalConnectionPo
lException: Error during pool creation in Universal Connection Pool Manager: or
cle.ucp.UniversalConnectionPoolException: Universal Connection Pool already exi
ts in the Universal Connection Pool Manager. Universal Connection Pool cannot b
added to the Universal Connection Pool Manager
at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(
CPErrorHandler.java:368)
at oracle.ucp.util.UCPErrorHandler.throwUniversalConnectionPoolExceptio
(UCPErrorHandler.java:49)
at oracle.ucp.util.UCPErrorHandler.throwUniversalConnectionPoolExceptio
(UCPErrorHandler.java:80)
at oracle.ucp.admin.UniversalConnectionPoolManagerMBeanImpl.createConne
tionPool(UniversalConnectionPoolManagerMBeanImpl.java:316)
at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java
625)
... 61 more
<Aug 21, 2012 2:28:58 PM BST> <Error> <Configuration Management> <BEA-150035> <
n attempt was made to download the configuration for the server oim_server1 by
he user iamamin with an invalid password.>
thanks
sri485 -
Insert into remote Oracle DB from Excel spreadsheet
We currently have a Full Oracle database ( PROD ) which I can remotely link to with a version of Oracle Express on my desktop. Also, I can successfully link to an Excel spreadsheet. I am able to insert into a table on the Oracle Express database from the Excel link, and I can also insert to the PROD database from the Oracle Express database.
However, when I try to insert rows into the remote PROD database from Excel, I get the following error.
"Problem ORA-02019 connection discription for remote database not found ORA-02063; preceding line from XE ORA-02063 preceding 2 lines from PROD"
The syntax that I am trying to use is:
"Insert into temp@prod
select * from Sheet1$@excel"
The above syntax works very well to insert rows on the Oracle Express database from Excel, but is creating the error when trying to insert to a remote Oracle database.
Is this solvable? Any advice is appreciated.
Thanks.Hey
Check this link:
http://www.dba-oracle.com/t_ora_02019_connection_description_remote_database.htm
Regards
Maybe you are looking for
-
Can you have 2 iTunes accounts on one computer?
My husband and I each have an iTunes account. We both have phones, iPads and until now had separate computers. One computer has bit the dust and we want to share one MacBook Pro. Can we have separate iTunes accounts, so we can sync phones and iPads,.
-
Macbook Pro starting up in different resolution after connecting to LG TV
Hi, Recently my dad used my Macbook to connect to our LG TV. After the connection cut down, my laptop screen down to that resolution with black bars on the bottom for like 1sec. But now every time i shut it down, and turn it back on, the screen with
-
No Sound On Exported Keynote Movies
When I export recorded presentations as movies they come through with no sound. The presentation plays normally with the correct recorded timing but there is no narration. I know the narration got recorded because I can play it back in Keynote and he
-
Having trouble with web authentication in 5504
Hi everybody, We´re experiencing a trouble with our Wireles LAN solution. We have a WLC 5504, a ACS 4.2 and APs 1131AG. After deploying the solution and doing some tests we noticed when a user attempted to connect by wireless network there was too mu
-
Lotus Notes Backup data .nsf file corrupted
Hello friends, One of my users backed up data (nsf file) of Lotus notes got corrupted. The file size is 4 GB. Now the user is asking me to retrieve the data (mails) and i am not able to find any utility. Anyone having idea about any such free utility