Trying to get data from a bluetooth device using labview. Can anyone help?

I am currently working on a project to monitor pulse rate and need send the reading via bluetooth. My laptop is bluetooth enabled and is using a toshiba stack. I am new to LabView and need some help with this.
Message Edited by Iceberg D4 on 05-05-2009 10:58 AM

You can definitely do this using LabVIEW. Search for labview bluetooth on NIs website to look for articles and documentation with regards to this. One thing I noticed and would like to point out:
On Windows XP - LabVIEW works with Bluetooth devices that use the Microsoft Bluetooth
driver included with Windows XP Service Pack 2 and later. Refer to the
Microsoft Web site for Bluetooth devices that are supported by the
Microsoft Bluetooth driver. Most Bluetooth devices come packaged with a
proprietary Bluetooth driver. To use the device with LabVIEW, the
Bluetooth adapter must be using the Microsoft Bluetooth driver. A
Microsoft Bluetooth driver for Windows XP SP1 was also available. Refer
to Microsoft Knowledge Base Article 323183: Availability of Windows XP Service Pack 1 Support for Bluetooth Wireless Devices for more information about Bluetooth-compatible operating systems.
Have a look at the following:
http://zone.ni.com/devzone/cda/tut/p/id/3260
http://zone.ni.com/reference/en-XX/help/371361E-01/lvcomm/bluetooth_vis/
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Similar Messages

I have lost all my data from my iphone during synchronisation. Can anyone tell me how to get the information back

I have lost all my data from my iphone during synchronisation. Can anyone help me?

You might profit from a visit to a Minneapolis Apple store. With a brand new Mac, I think they will be most helpful - not just with transferring files, but with other advice as well. And I strongly recommend you invest in a back up drive. The Apple folk can help with that as well.

Even though iOS cannot restore backups of newer devices, can it restore data from an older device using 7.1.2 to a newer device using iOS8

iPhone 4s 16GB running iOS 7.1.2. Even though iOS cannot restore backups of newer devices, can it restore data from an older device using 7.1.2 to a newer device using iOS8

Hi ,
Welcome to the Apple Support Communities!
I understand that you cannot use your Wi-Fi after the latest update to your iPhone 4s. I know you have already done some great troubleshooting by restoring with iTunes but the Wi-Fi becomes unavailable very quickly after you set it up. Go ahead and set up the iPhone so you can get into the Setting and then follow the steps provided in the attached article.
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Resolution
Follow these steps to resolve the issue:
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you complete all of these steps and still are not able to access the Wi-Fi, it may be necessary to follow the link at the bottom of the page and contact Apple Support.
Have a great day,
-Joe

How can I get Data from the Sound cart in Labview? Does a VI exist?

How can I get Data from the Sound cart in Labview? Does a VI exist?

Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
Khalid

How to communicate with third party bluetooth device using LAbVIEW

Hi
      I am trying to communicate with a third party bluetooth device using LabVIEW, I am using a bluetooth dongle. I am able to discover the device and able to open the connection by specifying the service as serial port. But after that when I am trying to read and write data between LabVIEW and the bluetooth device (using Bluetooth Read & Bluetooth Write functions) its not happening.
Dose anybody faced same kind of issue if so kindly guide me, this is first time I am using Blutooth protocol.
Regards
Visuman

Hi,
I am able to talk with bluetooth / serial devices by using Labview protocol (not Wii dll). These are steps:
      Discover the bluetooth device in range (Bluetooth dicover.vi)
      Get the address of the device
      Pass device address to Bluetooth RFCOMM Service Discovery.vi to get service list
      Pass channel and uuid to Bluetooth open connection
      After that do write and read (Bluetooth Write / Bluetooth read).
I hope it works for you.
Take care
tp

How to read data from a router by using labview

I am a beginner labview. How to read data from a router by using labview ?

What kind of data are you trying to read?
Does the router behave like a webserver that you log into? If so, search the forums for threads discussing HTML.

I have Windows XP, 32 bit version 2002 Svc Pack 2 and when trying to download iTunes 10.5 I am getting the following "The older version of Bonjour cannot be removed. Contact your tech." I've tried a good number of remedies to no avail. Can anyone help?

I have Windows XP, 32 bit version 2002 Svc Pack 2 and when trying to download iTunes 10.5.1 I am getting the following "The older version of Bonjour cannot be removed. Contact your technical support." I've tried a good number of remedies to no avail. Can anyone help?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
If you still have no luck try reinstalling iTunes 12.0, links in the user tip.
tt2

My Apple TV is not working. On tv display, I'm getting unsupported signal. Check your device output. Can anyone help plz.

My Apple TV is not working. On tv display, I'm getting a message 'unsupported signal. Check your device output. ' Can anyone help plz.

connect it to a tv which support full hd and go into the settings and lower the resolution as much as possible and then connect it with your tv once more

Neither my ipad or ipod are being recognized by itunes so i can't transfer songs from itunes playlists to the two devices. this is new, as far as a week ago i transferred music from the computer to the ipod. can anyone help?

neither my ipad or ipod are being recognized by itunes so i can't transfer songs from itunes playlists to the two devices. this is new, as far as a week ago i transferred music from the computer to the ipod. can anyone help?

Hey lightc,
If you are having an issue with iTunes not recognizing your iPad and iPod on your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows
Thanks for using Apple Support Communities.
Happy computing,
Brett L

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace

I am new to the ethernet communication using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.

i am new to the ethernet communication using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.
Solved!
Go to Solution.

Hi thanks for the help.
Actually i am trying to send 10 sine signals from server pc to client pc. So i will bundle 10 signals in server pc and send it and in client pc i am unbundling it and need to save in TDMS format.
Till unbundling i was able to do. TDMS format it is saving only last value. I need to save all the values. Kindly help me on same. I am attaching both the VI.
Attachments:
Client.vi ‏62 KB
Server.vi ‏252 KB

TS1424 I get an error message "missing msvcr80.dll". Can anyone help?

I'm getting an error message "missing msvcr80.dll". Can anyone help?

there are numerous threads on this... the latest update kind of messed up (I'm being polite here) and I found a good solution under the thread title
for all those having issues with the 11.1.4.62 update
I tried to copy & paste, but it's not possible on this site.

Iv got a new macbook air. and cannot get it to work on my iMac? can anyone help??

Iv just bought a macbook air external dvd drive. and i cant get it to work on my imac? Can anyone help???

I don't believe the "Apple MacBook Air SuperDrive" is advertised to work with anything except a MacBook Air or a Mac Mini.
According to a MacWorld article, the reason that it won't work on other models is not a hardware issue, but a Mac OS X one. The MacWorld column described modifying a kernel extension file (dicey; a good way to make your Mac non-bootable if you mess it up); readers suggested a method that involved modifying only property list files.'
I'm not sure I believe that it is just a software issue, or a "what is Apple willing to test and support?" one. At the very end of the page, someone reported seeing "Extra Operating Current (mA): 600" in a USB device tree report.
I think this drive can draw more than the standard amount of power for a USB port. The USB ports on the MacBook Air (and now on the versions of the Mini that lack internal optical drives) have probably been designed with that in mind. The USB ports on the other Macs may only be supplying standard amounts of power, which might (educated guess) be insufficient for some operations (like burning DVDs).

I can't find photos imported from my iPhone 4 with "Image Capture" to iPhoto in my iPhoto anywhere... and they were deleted from the iPhone after import! Can anyone help me find the photos?

I can't find photos imported from my iPhone 4 with "Image Capture" to iPhoto anywhere... and they were deleted from the iPhone after import! Can anyone help me find the photos?

Do you know the date they were taken? Try search on that.
Regards
TD

I am using iphone 4s ios6.1.2 ...my iphone has become too slow once i have updated from ios 5.1.1..can anyone help me to make my iphone perform batter

i am using iphone 4s ios6.1.2 ...my iphone has become too slow once i have updated from ios 5.1.1..can anyone help me to make my iphone perform batter

Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete apps from this list.
- Press the home button twice when done.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

Trying to get data from a bluetooth device using labview. Can anyone help?

Similar Messages

Maybe you are looking for