Trying to start in safe mode but keep getting a panic advisor

Trying to start in safe mode but keep getting a panic advisor? Any idea why I cannot start in safe mode?

Hi garfire1,
Do you have an external disk with a Time Machine backup on it?
If you do, try to boot to the Recovery Partition of the TM disk.
- During a boot press the Option key after the chime but before you see a grey screen and then select the TM disk
- If you boot to this Recovery Partition, you have options to run Disk Utility to try and Repair/Repair Permissions of the internal disk or you can select to restore from the TM Backup.
Cheers

Similar Messages

Trying to start in safe mode, but....

Have a bad hard drive and trying to start in safe mode but the circle just keeps spinning, been over an hour. Any help to get it to start so I can offload content?

Brilaneb wrote:
Will I lose these using Disk Utility?
Hopefully not, but if the HD is dying it's possible that trying to fix it may have the opposite result.
Do you have another Mac you could connect it to? If so, you may be able to boot into Target Disk mode in the hope that you can copy off the data you don't want to lose before trying to fix the HD:
https://support.apple.com/kb/PH10725

MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
Run the Startup Manager to select Startup disk: http://support.apple.com/kb/HT1310
If those did not work your disk may be sick or dying. The top priority at this point is to make a backup copy of your data.
Check the health of the disk. Boot in Recovery Mode (Boot, Command-R). Run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Even if it does not show “Verified” you can still attempt a backup.
Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up. Do not attempt software repairs until you have secured the data.
If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable. A trip to an Apple store for confirmation would be in order.
If you have an external disk drive you can use as a backup drive then do so. If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one. Any 1 TB external drive will do.
Assuming it is still breathing you can try to recover the data without booting from the sick disk.
Reformat the external disk. (This will erase all data on the external disk.)
Boot in Recovery Mode. Start Disk Utility. Plug in the new disk. Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
Partition Layout > Single Partition
Name: Emergency Recovery 1 (or whatever name you wish to use)
Format: Mac OS Extended (journaled)
Options… > GUID Partition Table > OK
Apply
Select the Restore tab.
Drag the old system volume (Macintosh HD) to Source.
Drag the new disk volume (Emergency Recovery 1) to Destination.
Click on Restore.
It may take a long time for the backup.
If that will not complete post back for other emergency data recovery methods, including those from a brody.
If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk. If it does not finish with a green OK message try to repair it once or twice more. If it repairs with a green OK message, will it boot normally? If not, boot from the Recovery Partition and reinstall OS X.
If it is still not healthy, post back for further instructions.

I don't have my navigation bar at all. I tried to start in safe mode but I never get the dialog box the y say you should get to reset to defaults. Help?

i don't have my navigation bar at all. I tried to start in safe mode but I never get the dialog box the y say you should get to reset to defaults. Help? I have even uninstalled and reloaded firefox
== This happened ==
Every time Firefox opened
== My wife hit a button and doesn' know what happened

See if this helps. View > Toolbars, if no check beside Navigation Bar, click on Navigation Bar to check it.
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.18; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

IMac tries to start in safe mode but fails.

I have a Mid 2010 iMac running Maverick. I added 16gb of ram to the 4 existing which I have done on many Macs. It started up but after a minute or two it forced restarted on its own. I then tried it a few more times and continued to crash then restart. I started it in safe mode. It nearly loaded completely the safe start then shut down. Any time I now try to start it, it does the same thing, starts in safe mode then fails. I have taken the 16 extra gas of ram out and it still fails to load. Any advice would be greatly appreciated!

Have you tried repairing the disk? I know it seems simple but sometimes this can be the problem.
Hold down Command+R when starting the computer, select repair disk from the menu.
This won't delete any data and may not work but it's worth a try.

Yosemite won't install on my computer because the disk needs to be repaired. I verify, it indicates repair is needed but then the repair disk button can't be clicked. I tried to start in safe mode but it just froze.

I'm to install Yosemite but it tells me the disk need to be repaired. When I verify the repair disk button remains pale and in-clickable. I'm not sure which version of OS X I'm running but I do know I forgot to back up. Help me o-message board, you're my only hope!

Welcome to Apple Support Communities
First of all, open the Apple menu -> About this Mac, and tell us what OS X version you have.
If it is 10.6.x, you need the Snow Leopard DVD. Insert it, press the C key while your Mac is starting up, choose your language and go to Utilities menu (in the menu bar) -> Disk Utility.
If it is 10.7.x or higher, hold down Command and R keys while your Mac is starting up to boot up in OS X Recovery, and open Disk Utility.
After opening Disk Utility, choose your OS X partition in the sidebar (it is usually named "Macintosh HD") and press "Repair Disk". When it has finished, restart your Mac, make a backup of your files and try upgrading to OS X Yosemite.
The backup will help you in case you decide to go back to the OS X version you are using now. If you cannot make a backup and the disk repair does not work, you will have to format the hard disk.

TS1717 On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?

On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99442)

Firefox installed the latest version. Now my google browser, history etc. doesn't work anymore. It doesn't respond. I can't run searches from the browser. youtube button is missing. I've tried opening firefox in safe mode but that doesn't work.

# Question
firefox installed automatically the latest version. Now my google browser, history etc. doesn't work anymore. It doesn't respond. I can't run searches from the browser. youtube button is missing. I've tried opening firefox in safe mode but that doesn't work

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
What happens if you open Firefox in Save mode?
*https://support.mozilla.com/kb/Safe+Mode
*Help > Restart with Add-ons Disabled

I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?

I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally.
tt2

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

TS4268 I am trying to facetime on my mac but keep getting the message "The server encountered an error processing registration. Please try again later." I have gotten this multiple times. how can I get around this?

priority:
I am trying to facetime on my mac but keep getting the message "The server encountered an error processing registration. Please try again later." I have gotten this multiple times. how can I get around this?
i also have tried downloading "FaceTap" application to get facetime on my ipad and failed too. i thought i failed because i couldnt download latest 6.0 iOS or later. i downloaded latest software update for iOS but was 5.8 I think

Wait until Apple fix it. See: http://www.apple.com/support/icloud/systemstatus/

Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?

Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?

Doublechecking something Emcee. I see you've got Windows 7 x64, so I'm assuming you've got at least 4 GB of RAM. Do you also have an NVIDIA USB EHCI chipset on that PC? If so, see the following Microsoft document:
[You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM|http://support.microsoft.com/kb/976972]

I just created an apple ID and then tried to log in to facetime but, keep getting : an error occurred during activation, try again" can anyone assist?

i just created an apple ID and then tried to log in to facetime but, keep getting : an error occurred during activation, try again" can anyone assist?

i just created an apple ID and then tried to log in to facetime but, keep getting : an error occurred during activation, try again" can anyone assist?

Im trying to deactivate CS5 Web Premium, but keep getting Deactivation Unsuccessful with Error Code

Im trying to deactivate CS5 Web Premium, but keep getting Deactivation Unsuccessful with Error Code 209:0

you can ask adobe support to reset your activation count, https://helpx.adobe.com/contact.html

I am trying to add a hard disk but keep getting an error message to add null disk

I am trying to add a hard disk but keep getting an error message to add null disk. How do I fix this problem?

When installing a new OSX, it is not unusual that some applications will not work. You have to check with the developer to see if they have upgraded to the new OSX or find a substitute application.
In regards to your new HDD, most of the time they come formatted for Windows, not Mac. Connect the HDD to your MBP and open Disk Utility>Erase. To make it compatible, select 'Mac OS Extended (Journaled)' as the format. Click on the Erase button. You then should be able to read and write to it.
Ciao.

Trying to start in safe mode but keep getting a panic advisor

Similar Messages

Maybe you are looking for