TS1363 I have uninstalled and reinstalled ithunes and still when I plug my phone into my computer, itunes doesnt recongnize that my phone is present so i cant sync anything. I have tried numerous USB cords. I have also tried wifi sync.
I have uninstalled and reinstalled ithunes and still when I plug my phone into my computer, itunes doesnt recongnize that my phone is present so i cant sync anything. I have tried numerous USB cords. I have also tried wifi sync.
Hey Mlynch13,
Thanks for the question, and amazing troubleshooting so far. There are a few things we can attempt on your computer, including restarting the Apple Mobile Device Support, and checking for the USB drivers:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.
Similar Messages
-
When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
Can anyone tell me why my phone wont sync when i plug it into the computer?
In iTunes there is a setting to automatically launch iTunes when the phone is connected.
http://osxdaily.com/2010/05/06/stop-itunes-from-automatically-opening-when-iphon eipod-is-connected/
You could just make sure the option that they talk about in this article is checked. -
Hello! I was on my Mac and then I clicked on iTunes. Then I clicked on Account, and accidentally removed my device from my Mac, how can I get it back? Also when I plug my iPod into the computer, it downloads everything that is on my computer, how can I stop this. please help! please help!!!!!!thank you
Is the iPod still singed into the account isn Settings>iTunes and App Stores and SettingsZ>iCloudl? If it is then I would not be concerned.
Also see:
iTunes Store: Associating a device or computer to your Apple ID
since you may have started the 90 day window.
For the other "problem", go to iTunes>Preferences>Devices and check the box that says Prevent iPod....automatically syncing. -
i just installed itunes 12 and now when i plug my ipod into my computer it won't sync I have tried different ipods still nothing
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
When i plugged my ipod into the computer it started to make buzzing and screeching noises. It became hot so i removed it and then the screen froze while it continued to make these noises. I have never had anything like this happen. (never gotten it wet or had it exposed to extreme temperatures) It is also unresponsive to any buttons on the ipod and it didn't show up when i plugged it into my computer. What do I do? Also if it is unfixable could i get a free one from apple?
Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David -
When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.
This is a post from a user named edgar999 and it worked PERFECTLY:
"OK - this is how it works:
In order to backup from iCloud you cannot use iTunes!
Therefore disconnect your device from your computer.
Turn on your device and go to Settings and then go to General.
At the bottom of this submenu there is a buttom "Reset"
If you push that buttom you see 6 different Erase settings to chose from!
Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud! (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
After choosing your location you will be asked to setup your WiFi-conection. After you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
Restoring from a backup can take some time. The process uses your Wi-Fi connection to download settings, content and data. If you had a lot of content on your device, this can take a while. The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad. When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
THANK YOU edgar999!!!! -
I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon. Could this be because I have an old iphone and it's not compatible with the latest version of itunes?
Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?
summarizing:
iPod nano (what version iOS BEFORE update?)
downloaded music
updated iPod to iOS 8.1.2
Windows 7 PC
plug-in iPod to PC
error message from iTunes on the PC "Ipod detected but can't be identified properly" ⬅[quoted from your original post] (+ suggested troubleshooting steps)
un-plug > re-plug iPod (how many times?)
iTunes un-installed from PC (?)
iTunes RE-installed to PC (?)
error message repeats(?)
searched "Ipod detected but can't be identified properly" site:support.apple.com with ZERO results - pretty strange that the support site wouldn;t know an iTunes generated error message (?) EDIT - had an "aha! moment when using a fresh Google search page and 'suggested' CANNOT
then "Ipod detected but can't be identified properly" site:discussions.apple.com had ONE result = Can't connect to iTunes with ipod touch (-50 error) - NO REPLIES
CANNOT instead of can't [ tsk tsk ]
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
follow all the instructions in order and let us know -
When i plug my iphone4 into the computer and itunes comes up, it says my "other" space is taking up about 1.94gb. what is this other and how do i reduce it to have more space on my phone?
Hi there kburgee! Other can be anything from App Data (information saved from apps like game progress, or passwords) to or old messages that you haven't deleted! The absolute best way to clean up some space is to restore your iPhone.
-
Pages crashes when opening any document on iPad 3 Latest version. I tried everything I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create a new document or open a document it just crashes out.
Try this:
Make sure IOS is updated to latest version
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings -
When I plug my ipod into my computer the computer dosnt read it and I get a messege saying that the device is drawing to much power. How do I solve this problem???
I had the same problem with mine when I connect the ipod when it's full charged and turn on. The problem never happen when the ipod is charging or i'ts full charged and it's turn off. So just turn off your ipod down and connect to your mac again.
-
When I plug my ipad into the computer to sync a message pops up saying that the ipad can not sync because there is not enough memory on the itunes library. Do I need to increase the itunes library memory and how do I do this, or do I just need to trasnfer things out of itunes? Thanks.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
when i plug my ipod into my computer it no longer takes me to itunes. my ipod screen is a white blank and i can no longer listen to tunes i have downloaded.
at one point i received a message that said it was corruped.My ipod has a white screen.
This forum category (where your question appeared) is for iPod shuffle, which has no screen. What iPod model do you have?
When you connect the iPod to your computer, and run iTunes, the iPod does not appear in the sidebar, under DEVICES?
At one point i got a message that it was corupted.
Where and when did this message appear? -
why metadata index shows up when i plug my ipod into the computer in itunes and it will not allow me to eject my ipod from itunes
Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe
Maybe you are looking for
-
I have problems with Itunes in my iPhone 4S since the newest Itunes update
When the latest Itune released was suggested in my Itunes I pressed yes, and I was asked to reset my Iphone. I did that and lost all the contacts, emails,etc, but I recovered them through I cloud. What I did not recovered was anything I had in Itune
-
Date Format in ADF BC + Customization + JDev 10.1.3.3
Hi, Currently we are specifying the date format in ADF BC EO component as MM/dd/yyyy for each attribute which is taking too much time.Specially when we do regionwide deployment of application where date format very specific,then again we need to go t
-
Hi all, I have configured an idoc in order to send information of materials to an external warehouse. But this warehouse is only from a specific plant, for only one company. When other companies create their materials, my idoc matmas04 is activated a
-
How to change headings and titles in standard performance mgmt screen ?
Hi, I am new to webdynro ABAP. Kindly help with inputs for below requirement To change the process title for Manager overview screen To change task descriptions (eg current description is- Schedule review meetings with employee and discuss goals. th
-
Hi Techis i m doin a report for Sales order for finished goods.. here i am shwin Status eg RED for goods not delivered at all YELLOW for goods delivered partially and GREEN for goods completely delivered . nw thing is dat i dont want to display goo