TS1389 Hi Since the last Apple update, every timr i open itunes I get the Welcome page and have to agree to share my libaray. before the update I only had to do this once. Now its every time. Any solutions?
HI Since the last Apple itune WIndows update every time i open itunes I get the Welcome page and have to agree to share my library. Before the update i had only done this once. Now its every timre i open itunes
Copied from your previous post.
You are right the Iphone is locked into the carrier softbank from Japan and its not the 3g model its the one before it, I am not sure what model.
If your iPhone is not the 3G model - it is the one before that, this means your iPhone is the first generation iPhone or the original iPhone, which WAS NOT sold officially by Apple in Japan. The first generation iPhone was sold officially by Apple in the U.S. as carrier locked with AT&T, in the UK as carrier locked with O2, in Germany as carrier locked with T-Mobile, and in France as carrier locked with Orange and as officially unlocked by Orange. The ONLY country where the first generation was sold as officially unlocked was in France, which is required by French law.
The original iPhone - the one before the 3G was not sold by Apple in Japan directly or through Softbank.
Did you purchase your iPhone from Softbank or from an Apple store in Japan ? If so, this would also mean your iPhone is carrier locked with Softbank since the iPhone is sold in Japan officially as carrier locked with Softbank only, and this would be the 3G or 3GS, not the original iPhone. This would also mean you are roaming internationally with Softbank with your iPhone in China. If you are using a SIM card from a carrier in China with your iPhone, your iPhone has been hacked to be unlocked unless you purchased your iPhone from an unofficial source in Japan which was sold originally as new officially in France as officially unlocked by the carrier Orange in France.
Is your iPhone is carrier locked with Softbank in Japan, are you paying Softbank international roaming fees while using your iPhone in China?
Similar Messages
-
I have an ipad 2 on ops 4.3 and have just updated to 7.1 via itunes. I backed up first and have synced repeatedly but keep getting a message on my ipdad screen that the ipad is not set up - I chose the set up option restore from itunes back up
To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit. -
When I am in safari, I try to bookmark a web page and it is not doing it, it worked before I updated to the ios6 version, does any one know why ? It pulls up the screen to save it but then it is not showing up on the bookmark drop down menu, it continues to show the standard google,iPad user guide, yahoo....
hello sofg777, when you're at a page you want to print try to press ctrl+P and select a different printer than the Microsoft XPS Document Writer which seems to be set as your default printer in firefox at the moment.
-
When I open safari, I get a blank page and the beach ball.
When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes—the .com of www.facebook.com for instance—but other times, nothing at all.
I've fixed this once before by deleting some files in the library folder—extensions & preferences I believe—and choosing not to have plug-ins selected, then restarting the whole computer—rather than just safari. It will work fine for a day, or maybe 3 at the most, before I have to repeat the process all over again. I'm sure it's because I usually put plug-ins back on once I get it to work, because you can't really use the internet without using plug-ins. But I'm using Chrome right now, as I do when I'm too lazy or too in a rush to try the whole process of getting safari to work again, and I don't have a single issue with it.
My question is really, what plug-in could cause this to happen repeatedly? It's not like I'm going to websites that may have malware on them. I spend most of my day going to some of the most visited websites on the internet.
Is there a known bug out there, because Java has been overrunning concurrently with this happening. It's CPU % runs around 100. I quit the process, but it doesn't change anything. So, other than the fan turning on, I have not had any popup telling me that safari has crashed, that I'm not connected to the internet, or that something went horribly, horribly wrong. I'm pretty sure Safari things it's running fine, but it's not.
Thanks in advance.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
After Downloading v8 I keep getting checking compatibilty dialogue box popping up when I launch Firefox. Then Firfox opens two tabs, Meet Mozilla welcome page and my home page. How can I stop this?
That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ " -
When I try to open itunes I get the following message: Itunes error R6034 An application has made an attempt to load runtime library incorrectly. An help greatfully received. I have also attemted to reload itunes to no avail.
Hey Sheribabe,
Thanks for the question. I understand you are experiencing issues when connecting your iPad. Let’s troubleshoot your iTunes installation by completely removing and reinstalling iTunes and all related components:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Thanks,
Matt M. -
How may I set up Firefox so that when I launch the browser I get only my home page, and not an additional web page? Thank you
The MySearchDial extension has been reported to cause this issue.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
How do I cancel my iCloud account? Please be direct and detailed with your answer as I'm too stupid to figure this out on my own. Thank you.
You can cancel an iCloud storage upgrade within 15 days of buying: however Apple have made this as difficult as possible. If you use Express Lane you cannot proceed without entering a hardware serial number which is still eligible for AppleCare. Poster julia22 managed to find a way round it - please see this post:
https://discussions.apple.com/message/16968425#16968425
it gives the USA number - if you don't live there you will have to find an equivalent number from the 'Contact Us' link at bottom right of this page. -
when I open mymac book pro i click on safari and it goes straight to facebook. but for some reason now when i open safari i get a strange address and have to go to bookmarks to find facebook. anyone have a clue
I tried to edit my previous post, but the system did not store my edits and no longer offers an 'Edit' button. The following is my revised post:
I am also using Safari 5.1.7. By choosing the 'Privacy' tab in Preferences and then clicking on the 'Details' button, I have accessed a list of all the domains that are currently storing cookies in my browser.
However, I'm unable to view the individual cookies or their contents by clicking or double-clicking on a given domain name in the list. So, how does one view an individual cookie and its content in Safari?
By comparison, when I view the list of all domains storing cookies in Google Chrome's Preferences (Settings/ Privacy/ Content settings.../ All cookies and site data...), I'm able to view all individual cookies for a given domain by clicking (once) on that domain name in the list. (One domain, for example, had 9 separate cookies.) Then, I can view the full content of each cookie by clicking on a button bearing that cookie's name. For example, the content within each cookie displays such information as:
'Name' (often a Session ID), 'Content' (a string of characters), 'Domain' (including subdomain, if applicable), 'Path' (generally root level, /), 'Send for' (when cookie should be invoked), 'Accessible to script' (yes or no), 'Created' (date), and 'Expires' (date). I find that some of this data can be enlightening -- such as when a site is storing affiliate codes in a cookie, and who the affiliate is. If I wish, I can delete an individual cookie (out of multiples) for a single domain, without necessarily deleting ALL the cookies for that domain.
Safari does not seem to have similar capabilities, which puzzles me. That's a big shortcoming, IMO. :-( -
Ever Since the Last Apple Security Update...
i loaded the last Apple Security Update on 06/02, and since then i have had OSX quit unexpectedly (twice) and have had FireFox quit as well. i have also had the cursor freeze and have had to force quit and restart my machine. My machine also seems to run a little hotter lately and i have not heard the fan come on for quit some time-- all of this since i downloaded the last update.
Has anyone else seen this in their machine? is this a sign of a coming apocalypse?
Anybody? Bueller?
Thanks for any helpful tips...
Powerbook G4 Mac OS X (10.4.9) 80 GB HD(new in 05/06)Nancy:
If you did not Repair Disk Permissions in Applications > Utilities > Disk Utility before and after installation, go ahead and do so now. Here's how:
While booted from your internal HDD
Go to (Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left column and First Aid in main column.
Click Repair Disk Permissions at bottom left.
Next, try starting up in Safe Mode, log in, empty Trash, restart normally and log in. See if this helps before we take any other meansures.
Please post back with update or further questions/comments.
Good luck.
cornelius -
What do I do every time I tap "Back up Now" (through iCloud) it always says "The last backup could not be completed". My iPad is plugged in, locked and connected to wi-fi. I still have available 11GB storage from 15GB total storage from iCloud.
I'm having exactly the same problem. I have a new iPad, my iCloud account is set up and verified (I wouldn't be logged in and writing this otherwise), auto backups are turned on, but it's never completed a backup. If I manually select 'Backup Now' in iCloud Settings, it times out while estimating time remaining. Strangely, today my iCloud free storage space went from 5G to 4.9G then back to 5G. Annoyingly, I'm now getting reminders that I've never backed it up! The iCloud help I followed from the forum didn't cover this error message.
-
every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.
Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin
-
Every time I try to run iTunes I get an error message sayinh: An application has made an attempt to load the C runtime incorrectly. What does this mean
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
In the last Apple Itunes update it deleted the file Msvcr80.dll, how do get it back so I can download Itunes again?
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Every time i try to open itunes i get the 'Itunes Setup Assistant'
Every time i try to open itunes i get the 'Itunes Setup Assistant' even though i have already installed and configured itunes. And after exiting this i get onto itunes but all of my music is GONE. (even though i know i can always import it back) But this means that whenever i want to use itunes i have to configure it and import all of my tunes again which takes ageees. The, as soon as i go to open it again i have to repeat the whole process!!! By the way, i have already tried re-installing itunes and every other apple device completely on my computer, but nothing is working!!! ANY HELP WILL BE MASSIVELY APPRECIATED!!! Ps. this only just started happening a week or so ago.
This just started happening to me last week also. After I went through the setup process I could get into my itunes but would get a msg about library not being saved due to user not being an administrator. I went into my program files opened the itunes folder right clicked on the itunes music folder and clicked on "Run as administrator". I haven't had a problem
since. Don't know if this will work for you but I guess it won't hurt. good luck.
Maybe you are looking for
-
How to increase the max connections for business rules.
How and where to increase the connection to EAS.currently we have max connection as 20.Also please let me know,what is the maximum connection we can increase. In our system totally,we have 350 users are present. when more that 20 users running the bu
-
My adobe Flash wont load after installing the upgrade to firefox 6..how can i get it to work?
i play the facebook games and i need to have adobe flash for it to work and when i upgraded the firefox to 6 the adobe doesnt download..i ve tried it many times and it wont download..
-
Hello, any help would be appreciated. The other night I was on my powermac g5 and it crashed. I restarted, it went to grey screen, loading icon, and then blue screen and just stopped. I tried starting in safe mode by holding down shift while starting
-
Hi, We are planning to configure QFS from a T3-2 to at least 2 non global zones. At the moment the data is shared over NFS but it has been decided to install and configure QFS for speed and resilience. Reading numerous documents I am unable to find a
-
Re-adding contacts, can't find them anymore
When I accidentally removed some of my Skype contacts and tried to readd them I couldn't find them anymore. I remember their Skype names and Skype ID, but searching their names results in nothing showing up in the directory. Now I am not able to read