TS1559 My iPhone 4s shows does connect to my wifi router but then after a while it shows still connected but does not open a page. I have to turn wifi off and on again to get the job done. it is annoying.
I am using iPhone 4s. I can connect to my home wifi network but it works briefly, then whilr it shows connected with good signal strength, but I can not open a page in safari. I have to turn off the wifi and turn it on again for connection. This goes on and on. Very annoying. Please can anyone solve this problem?
Hi ,
thx for the feedback,to clarify my question :
1-i am able to connect to any wifi network in airports, public places , my home , office , etc.o to get in is no problem.
2-I can also log in into a specific website eg: was in Paris 2 days ago and could log in into the portal of a wifi provider.
3-But when i have to log in providing an e-mail address or other info , i get into a loop where i can not get into the next page but i do get always redirected to the page asking all the info.
This is not only at an airport , i do have it also with my own internet service provider , even if i want to log in from my home into their webmail site i get into this loop where after putting in all the inlog data i get that same page back every time.( i can get mail through my normal mailbox , no problems here)
I do have indeed OS 6 and it is an iPad 2.I do not have the problem with an iPhone 4 S when i use wifi and here i also do have os 6 !!
Similar Messages
-
Is anyone having issues syncing the iPhone wifi hot spot to iPad, Mac, Etc..? I constantly have to turn it off and back on to get them to connect. I with it was a little more seamless... Thoughts?
Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I Installed Photoshop 2014 on my Mac, but it seems to freeze my entire machine making me have to turn it off and on again. Any thoughts?
Try chatting with an Adobe Support Specialist:
http://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
This may take awhile: you may find yourself chatting (via typing) with someone from India, but they are good at solving these kind of problems.
Good luck! -
My Ipad 2 (after the latest update) is burning through battery...even when I am NOT on the Ipad2....I have turned it off and on again....no difference...what else can I try...seems like I live with it pluged into power.
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
recalibrate the battery, let the device run out of battery to where it shuts off and then fully charge it without using it. -
In text or email, the keyboard will not come up. I have to reset phone or turn it off to get started again. How can i fix this issue?
Hello Jennings Castle,
It seems your iPhone is slowing down and not responding frequently. To rectify this issue you may want to consider performing a restore on the device, and then restoring your data from a backup via iCloud or iTunes.
If the issue persists after restoring your backup, you would then want to consider restoring the device and setting it up as new. Below I have linked to article which offers guidance on both of these restore methods:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
Thank you for contributing to Apple Support Communities.
Best,
BobbyD -
so not sure what to do - it doesnt crash whil it used to run - now it wont start
Try these
Open Lightroom while holding down the ALT key and choose create new catalog.
If that doesn't work than reset your preferences file by deleting it and having lightroom rebuild it.
If that doesn't work reinstall Lightroom and try the new catalog trick.
If that doesn't work then your PC is probably NOT fine and may be a problem with the OS or Hardware. -
My 8500a pro won't print even though it says printing. i have to turn it off and then on again.
I have to turn it off and on again to get it to print.
Try upgrading the product firmware following the below steps:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
Apart from that, if you are using Wifi connection, try selecting IPv4 connectivity.
To do that, you can go to the printer ip address from your PC browser (http://xxx.xxx.x.xxx)
Select the Network tab> Network Protocols> Enable IPv4 Only.
Some times, the network environment is contributes to unstability. Above mode at times does help resolve this issue.
I work for HP. -
I guess I was not clear.....my fault....let me re-phrase: frequently I send an email to multiple contacts.....I'm constantly changing my selection of multiple contacts so using the "group" function doesn't get the job done.......so how can I go through my list of contacts and quickly select those contacts that I want to receive that particular email....thx
You need an app that allows group messaging. Enter group messenger in the search bar in the app store.
-
I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
Please help!!!!You dont have any data on your phone yet right?
If you dont connect your device to the computer and
Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
after that try again -
My laptop turns on, reaches the desktop and then suddenly fades to black as if it was put to sleep but never comes back to life until I turn it off and on again. What do you think is the problem and how can I fix it?
If your phone got wet, try this first:
How to Fix a Wet iPod or iPhone
If this does not help, you'll have to get it serviced:
Apple - Support - Service Answer Center -
My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down. First I thought it was the earphones, but I exchanged them for newer ones and so far its the same
You may want to do a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings. If it's a software or data corruption glitch, the Restore should fix it. After the Restore, reload or resync your songs, and try it again. As a test, you may want to initially select a small number of songs to put back on the shuffle.
-
i am having trouble home sharing i have turned it off and on again it worked on my 4s before i backed everything up and switched to the 5s the home share is not even an option when i open music or videos on either of my phones
i am having trouble home sharing i have turned it off and on again it worked on my 4s before i backed everything up and switched to the 5s the home share is not even an option when i open music or videos on either of my phones
-
When i turn imac off and on again nothing is saved-Documents, iTunes etc
when i turn imac off and on again nothing is saved-Documents, itunes, downloads etc
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Runninig 10.6.8 on new iMac. The last two weeks I keep loosing internet and have to turn airport off and on to restore service. This happens every time it goes into sleep mode. It is not the router as my two laptops do not have this problem. I read that in 2008 MMP's had a similar issues .Any thoughts?
Go to /Library/Preferences/System Configuration
Move all the files from the System Configuration folder to the Trash.
Restart your Mac. See if that made a difference.
Maybe you are looking for
-
how to create an apple account without using a credit card. Im trying to use gift cards but it says i need to usea credit card what can I do
-
Messages in "Sent Mail" were never actually sent.
We recently switched to Snow Leopard exchange, and switched from Microsoft Entourage to Mac Mail. Ever since the switch, I have realized that I am not getting any notifications if an email is not able to be sent. I am normally able to send emails fin
-
File sharing problem with EG005W
Hello, I'm having problems recognizing shared drives when using the EG005W switch on my Linksys network. Here's my configuration: ADSL --> SpeedStream 4200 modem --> LinksysWRT54G Wireless Router --> EG005W Gigabit Switch Computer A = XP with EG1032
-
Hello, we are trying to print customer aging bucket on monthly statement by print program RFKORD10. in customer due date list, i entered the break down days as 30, 60, 90 and etc. But when i run RFKORD10, the structure RF140 is not updated with the b
-
Question regarding ExternalizableLite
One question regarding extending ExternalizableLite If I have a class A which extends ExternalizableLite as class A { int index; B objectB; I'd need to use the ExternalizableHelper's writeObject and readObject when deal with objectB member. If I also