TS1646 how do i arrange a call back
how do i arrange a call back
Do you mean form iTunes Support ? If you do (and these are user-to-user forums) then whether it's possible might depend upon what country that you are in, and possibly the time of day (and the type of query, for some types it may be email only).
To contact iTunes Support :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page
Similar Messages
-
Why have iTunes charged my account when I've got a £20 voucher on my account and the. Had to arrange a call back what was 2 days ago they called me back tonight then the automated voice said the department was closed this is a wrong I want my money back! Or I'm gonna sell my iPad my kids iPods and iPhones mine and my wife's iPhones and the mac this is a **** take
We are fellow users here on these forums, you are not talking to iTunes Support nor Apple.
Were you buying content for yourself or gifting to another account ? If you were gifting content or an amount then that can only be done via credit card). If you weren't then you will need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
How do you cancel a call back reminder
I was playing with the phone when I bought it and tried the "Remindme later /When I leave home" option.
Now I get a reminder every time I leave home and no option to cancel or clear the reminder. This may be a useful feature when I am old and losing it though I'll probably not remember why I set it then either.
I have checked all calenders and reminder lists, phone settings and any where else I can think it may be stored and no joy
Any help would be greatly appreciated
Update:
I created another alert which I found in reminders and it was easy to cancel but the original one from a few weeks ago is still lurking somewhereThere may be many lists. My lists look like this (without any explicit tampering on my part -- I just use iCloud to share reminders):
-
HT1766 hi, how to call back the back up when its has been overwrite with the new one?
hi, i was tried to back up and restore my iphone 5 and then update to the latest version with my mac itunes, unfortunately my iphone 5 hang in the middle and it reback-up and overwrite the previous one and i didnt know how com it will overwrite the old one with the new back up, which means all my datas gone, how am i going to call back them?
You don't unless you keep regular backups of your computer in which case you can restore previous backup files.
-
Hi, every one:
Here's my question of my day - >>>
I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K, and
I got a web service up and running called Price Update web service through
which user can pick up a price and push a deal to another web service
called: deal service, the deal service will take the user deal and book the
deal ( sending a JMS message to a Queue, a MD will pick up and do the work,
then send the confirmation to another JMS Queue ), then the confirmation
will be picked up and sent to another web service , called: User Deal
Confirmation Service, here's the question:
1. Since the client application is only allowed to see its own confirmed
deals, how I can make the confirmed deal encrypted based on a server
generated key or the session id that client application provides
2. Now, I have 3 webservices: update, deal and confirm, each of them has a
client.jar file available - from the client application point of view, do I
need all these 3 client.jar, or I just need one of them ?????
3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
beta, you can do this easily in the workshop, in the second question above,
I think I need some how relate the confirmation to the client conversation
id ??
thanks a lot for the input, have a nice day.
regards,
mark.Any comments ?
mark
"markhu" <[email protected]> wrote in message
news:[email protected]..
Hi, every one:
Here's my question of my day - >>>
I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K,and
I got a web service up and running called Price Update web service through
which user can pick up a price and push a deal to another web service
called: deal service, the deal service will take the user deal and bookthe
deal ( sending a JMS message to a Queue, a MD will pick up and do thework,
then send the confirmation to another JMS Queue ), then the confirmation
will be picked up and sent to another web service , called: User Deal
Confirmation Service, here's the question:
1. Since the client application is only allowed to see its own confirmed
deals, how I can make the confirmed deal encrypted based on a server
generated key or the session id that client application provides
2. Now, I have 3 webservices: update, deal and confirm, each of them has a
client.jar file available - from the client application point of view, doI
need all these 3 client.jar, or I just need one of them ?????
3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
beta, you can do this easily in the workshop, in the second questionabove,
I think I need some how relate the confirmation to the client conversation
id ??
thanks a lot for the input, have a nice day.
regards,
mark. -
How to unrigister the call back function,in vb6 with DAQmx 8.5
I use daqmx api which named DAQmxRegisterEveryNSamplesEvent to register my call back function,When I invoke the function DAQmxErrChk (DAQmxStopTask(taskHandleAnalog)) to stop my Task.then i call the procedure AD_OPEN again,it raise an error ,tell me that i need to unregister the event,the data has transfer into the buffer.how can i unregister the event,please look at the following code.
Spoiler (Highlight to read)
Private Sub create()
Dim channel As String
Dim minVoltage, maxVoltage As Double
Dim samplesPerChannelPerRead As Double
Dim sampleMode As Long
Dim boolVal As Boolean
On Error GoTo AdErrorHandler:
' Get values from UI controls
channel = "Dev2/ai1:2"
minVoltage = -10
maxVoltage = 10
samplesPerChannelPerRead = 100
If (taskHandleAnalog <> 0) Then
DAQmxErrChk (DAQmxStopTask(taskHandleAnalog))
DAQmxErrChk (DAQmxClearTask(taskHandleAnalog))
taskhandle = 0
End If
' Configure the task
DAQmxErrChk (DAQmxCreateTask("", taskHandleAnalog))
DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandleAnalog, "Dev2/ai0", "", DAQmx_Val_InputTermCfg_RSE, minVoltage, maxVoltage, DAQmx_Val_VoltageUnits2_Volts, vbNullString))
DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandleAnalog, channel, "", DAQmx_Val_InputTermCfg_Diff, minVoltage, maxVoltage, DAQmx_Val_VoltageUnits2_Volts, vbNullString))
End Sub
Private Sub AD_Open()
DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandleAnalog, "", 200, DAQmx_Val_Rising, DAQmx_Val_AcquisitionType_ContSamps, samplesPerChannelPerRead))
'Find number of samples specified
DAQmxErrChk (DAQmxGetTaskNumChans(taskHandleAnalog, numChannels))
'Configure Event Callbacks
DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(taskHandleAnalog, 1, 4, 0, AddressOf EveryNSamplesEventHandler1, Nothing))
ReDim dataBuffer(numChannels * samplesPerChannelPerRead - 1)
' Start the DAQmx Task
' DAQmxErrChk (DAQmxCfgDigEdgeStartTrig(taskHandleAnalog, "/Dev1/PFI2", DAQmx_Val_Edge1_Falling))
DAQmxErrChk (DAQmxStartTask(taskHandleAnalog))
' Update UI
Exit Sub
AdErrorHandler:
MsgBox Err.Description
End SubThis may be a bit late, so hopefully you found this on your own. But in order to unregister the event pass a null value for the callback function parameter in the DAQmxRegisterEveryNSamplesEvent function (Nothing in VB).
National Instruments
Product Support Engineer -
How to call back to C via JNI in Java started from C?
Hi!
This problem might seem outlandish, but I have not been able to find any other method to reach my goal. The situation is the following.
There is a C++ program I intend to interface with a piece of Java code, called the manager. The C++ code invokes a VM, starts a Java glue code, that connects to the manager via RMI. This works fine. The glue code, however, can be called from the manager, via RMI as well. The problem is, that these calls should in turn call functions in the C++ code, that originally started the Java glue code. JNI can only load a library, but this is not what I want to do now. I want to somehow connect back to the C code that started the Java code. Is this possible at all?
Thanks for your help,
AmbrusWhat you want to do is not too tough, but there will be some details to be worked through. In particular, you have to figure out how to make your "callback" get from your "glue" code back into your C++.
1. Calling back out is from java to C is pretty easy. There is a JNI function for registering a native method with the JVM. Here is an example of the registration code:
// See if the service interface class is known.
javaClass = javaEnv->FindClass("JavaInterfaceObject");
if (javaClass != 0) {
//Register a native method to place java server messages in the service log.
// Define the service logger native method.
JNINativeMethod methods[] = {
{"addToMessageLog", "(Ljava/lang/String;)V", Java_addToMessageLog}
// Register the method with the jvm.
javaEnv->RegisterNatives(javaClass, methods, 1);
javaEnv->ExceptionClear(); // Just in case not found.
return TRUE;
2. You have to define the native method:
* Native method - callback to place java server messages in the service log.
JNIEXPORT void JNICALL Server::Java_addToMessageLog(JNIEnv * javaEnv, jclass javaClass, jstring javaMsg) {
jboolean isCopy;
const char* msg = javaEnv->GetStringUTFChars(javaMsg, &isCopy);
Server::theServer->logger->addToMessageLog((char*)msg);
if (isCopy)
javaEnv->ReleaseStringUTFChars(javaMsg, msg);
3. The real headache is that this is C code, not C++. In other words, if you really need to call into C++, then you need to seed your callback so that it has a pointer to the appropriate C++ object. -
How can I get rid of the added / preset text words included in my text messages. It always says something like "Please call back at ###-####."
JenJenTen,
I understand that having a preset text that you did not want can be a bit frustrating when sending out text. To clarify, is the preset message like a signature at the end of your text? Does this only happen in text messages or when your send emails also? Is your SMS delivery confirmation on? Messaging>Settings>SMS delivery confirmation.
LindseyT_VZW
Follow us on Twitter @VZWSupport -
my iphone 4 is getting horrible service in Mendota, IL. I drop every single call and have to call back people 3 or 4 times just to finish a conversation. How can i fix this? Its getting really annoying and I cant upgrade to an iphone 5 until January.
Hi KL04!
Let's see what's causing the problem! Current zip code? When did the issue begin? Are you experiencing the issue in or outdoors?
Thanks,
AyaniB_VZW
Follow us on Twitter @VZWSupport -
Please help. I lost very important voicemail when i changed my sim card due to call drop out. How do i get my voicemail back??
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and tested on: 2014/05/23 -
How to use call back function ?
i have MlEditmanager class which extends xyzManager class. I also want to extend Eventdispatcher .. but it is not possible to extend more than one class ...
so the work around can be to create call back function. private var xyz:Function; --> how to use this syntax?
Can someone help me how to achieve this?
Urgent pls.Hi
check out this link
http://rushmeflex.blogspot.com/2010/09/cairngorm-2-view-notification.html
Though this is not your requirement, however in the source code callback functions are used. You can get clue from that.
Hope this helps
Rush-me -
How to call backing bean method from java script
Hi,
I would like to know how to call backing bean method from java script.
I am aware of serverListener and [AjaxAutoSuggest article|http://www.oracle.com/technology/products/jdev/tips/mills/AjaxAutoSuggest/AjaxAutoSuggest.html]
but i am running in to some issues with [AjaxAutoSuggest article|http://www.oracle.com/technology/products/jdev/tips/mills/AjaxAutoSuggest/AjaxAutoSuggest.html]
regarding which i asked for help in other thread with subject ....Question on AjaxAutoSuggest article (Ajax Transactions Using ADF and J...)
The reason why i posted is ( though i realise both are duplicates) .. that threads looks as a specific question to that article hence i would like to ask the quantified problem is asked in this thread.
So could any please letme know how to call backing bean method from java script
Thanks
Murali
Edited by: mchepuri on Oct 24, 2009 6:17 PM
Edited by: mchepuri on Oct 24, 2009 6:20 PMHello,
May know how to submit a button autoamtically on onload of page with clicking a welcome alert box. the submit button has managed button too to show a message on console using SOP.
the problem is.
1. before loading the page a javascript comes on which i clicked ok
2. the page gets loaded and the button is there which gets automatically clicked and the managed bean associated with prints a message on console using SOP.
I m trying to do this through server listener and click listener. the code is(adf jspx page)
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" binding="#{backingBeanScope.backing_check4.d1}">
<af:form id="f1" binding="#{backingBeanScope.backing_check4.f1}">
<af:commandButton text="commandButton 1"
binding="#{backingBeanScope.backing_check4.cb1}"
id="cb1" action="#{beanCheck4.submit1}"/>
<af:clientListener type="click" method="delRow"/>
<af:serverListener type= "jsServerListener"
method="#{backingBeanScope.backing_check4.submit1}"/>
<f:facet name="metaContainer">
<af:resource type ="javascript">
x=confirm("hi");
// if(x){
delRow = function(event){
AdfCustomEvent.queue(event.getSource(), "jsServerListener", {}, false);
return true;
</af:resource>
</f:facet>
</af:form>
</af:document>
</f:view>
<!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_check4-->
</jsp:root>
the backing bean code is -----
public class classCheck4 {
public classCheck4() {
public String submit1() {
System.out.println("hello");
return null;
} -
How get recent call back (because of I change password form other device)
I use iphone 5 and ipad2
all devices use same apple id
I change apple id(password) on ipad
my recent calls in iphone are lost but i cant remember one important number
How get recent call back ? i sign in my apple id on my iphone too but it not work.If you have previously employed Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support, then restoring using iTunes should do the trick.
From the above article (emphasis is mine):
What iTunes backs up
SNIP
Contacts* and Contact Favorites. (You should regularly sync your contacts to a computer or cloud service, such as iCloud.)
SNIP
*Your contacts are part of the backup to preserve recent calls and favorites lists. To avoid any potential contact data loss, back up your contacts to a supported personal information manager (PIM) or another cloud-based service (such as Gmail or Microsoft Exchange). You can also make a copy of contacts that are in iCloud. Learn about backups in iCloud.
ÇÇÇ -
RMI call back - How to refer to the client project from the server project?
Hi, I am working on an RMI assignment which basically needs me to use the RMI call back for the server to notify the clients.
I have 2 projects , one for the client and another for the server.
In the client project, I have a client interface and the main client class implements this interface.
In the server project, I have a server interface and a class that implements this interface.
I can use the server interface in the client project's code by adding the server project in the path of the client project. it lets me use the server interface in the code if I put "import.." statement.
But the issue is I can not do the same to access the client interface from within the server project's code. Since that will be a circular reference, the compiler does not let me use the client interface from within the server's code. This is putting me in a great difficulty and I am stuck here. What should I do so that I can use the client interface and the compiler won't complain?
Thanks for any help..
Regards.. jsLet me explain what I tried: I manually generated stub class of the client using the Eclipse IDE as mentioned in my previous message. The StockMSClient_Stub.class got created in my client project.
The common project has the 2 interfaces - one from the client and one from the server.
I have added reference to the common project from the client and server projects to use the interfaces.
With the above mentioned in place, when I run the server project, the registry binding of the server objects is very fine. But I am getting error in the applet at the line where I am passing the client object to the method provided by the server interface. The following is the code snippet in the applet where I am getting the error.
specifically the line: String response = objs.login(userId, password, smsClient); ====================
public void login() {
Registry reg = null;
String userId = "test";
String password = "test";
this.smsClient = new StockMSClient();
try {
reg = LocateRegistry.getRegistry(rmiHost,rmiPort);
UserInterface obj = (UserInterface) reg.lookup(rmiStrings
[1]);
User u = obj.find(userId);
if (u == null) {
System.out.println("This user is not valid");
} else {
UnicastRemoteObject.exportObject(smsClient);
reg = LocateRegistry.getRegistry(rmiHost, rmiPort);
LoginLogoutInterface objs = (LoginLogoutInterface) reg
.lookup(rmiStrings[0]);
//getting error at the following line.
String response = objs.login(userId, password, smsClient);
System.out.println("response :" + response);
} catch (AccessException ae) {
System.out.println(ae);
} catch (NotBoundException nbe) {
System.out.println(nbe);
} catch (RemoteException re) {
System.out.println(re);
} //end login()====================
Error is:
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: sms.rmi.graphics.StockMSClient_Stub (no security manager: RMI class loader disabled)================
I don't know why this is happening..Please help.
thanks & regards, js
Message was edited by:
jsitaraman -
How to implement a call back service?
hi all,
i have a method which calls a particular function module. i want to achieve the following two things in the code:
1. after calling the function module, i want the program flow to get paused - it should wait for a notification from the function module to proceed further.
2. the function module should send a call back to the method intimating that it is done with the job.
due to the scenario, synchronous call wil not solve the purpose. i need to use explicit wait and notificaion / call back service.
any help would be greatly appreciated. thank you.
rgds,
ramHello. Have you taken a look at CALL FUNCTION ... STARTING NEW TASK ...
See example below. Regards, Peter
DATA: INFO LIKE RFCSI,
Result of RFC_SYSTEM_INFO function
SEMAPHORE(1) VALUE SPACE, "For WAIT condition
MSG(80) VALUE SPACE. "Handling of exceptions
RET_SUBRC LIKE SY-SUBRC. "Handling of SUBRC
CALL FUNCTION 'RFC_SYSTEM_INFO'
STARTING NEW TASK 'INFO'
DESTINATION 'NONE'
PERFORMING RETURN_INFO ON END OF TASK
EXCEPTIONS
COMMUNICATION_FAILURE = 1 MESSAGE MSG
SYSTEM_FAILURE = 2 MESSAGE MSG.
IF SY-SUBRC = 0.
WRITE: 'Wait for reply'.
WAIT UNTIL SEMAPHORE = 'X'.
IF RET_SUBRC <> 0.
WRITE MSG.
ELSE.
WRITE: / 'Destination =', INFO-RFCDEST.
ENDIF.
ELSE.
WRITE MSG.
ENDIF.
FORM RETURN_INFO USING TASKNAME.
RECEIVE RESULTS FROM FUNCTION 'RFC_SYSTEM_INFO'
IMPORTING RFCSI_EXPORT = INFO
EXCEPTIONS
COMMUNICATION_FAILURE = 1 MESSAGE MSG
SYSTEM_FAILURE = 2 MESSAGE MSG.
RET_SUBRC = SY-SUBRC. "Set RET_SUBRC
SEMAPHORE = 'X'. "Reset semaphore
ENDFORM.
Maybe you are looking for
-
Zooming in in CS.5.5 with theatrical footage
Hi, I would like to zoom in on clip in Premiere Pro. The problem is that footage has a theatrical borders on the top and bottom and I would like to keep those borders. When I do zoom in, the top and bottom black borders disappear and the picture ex
-
I have restored my ipod and now the songs in my library wont sync onto it:)).. !! please help!!
-
Hello I have some question slides in my course that are not scored. After the questions have been answered or skipped and the learner clicks on the rewind button to re start the course the question slides are greyed out. How do I make the questions
-
Status ARCHIVE_CONTENT in program SAPLOCS_UI is missing
Hi, SAP expert, I just install minisap 4.6D recently. I try to play around to upgrade the support package via transaction code SPAM. When I upload the support package (e.g.: SAPKA46D01.CAR) from the frontend (local PC), it shown a dialog sc
-
How to get full URL when LoaderInfo.isURLInaccessible == true?
Why is Flash Security so hard to figure out? I am trying to load an image; however, the image URL I 1st receive is actually a redirected URL. I wish to load the redirected URL, but I can't get the full redirected URL because LoaderInfo.isURLInaccessi