TS1702 Why are my pages templates in French?

Just bought pages and noticed all my templates are in French, can someone please tell me if and how to change this.

https://discussions.apple.com/message/11573902#11573902

Similar Messages

  • Why are two pages yoked when I prepare a newsletter in Pages?  How can I delete one without the other?

    Why are two pages yoked when I prepare a newletter?  How do I delete one without the other?

    They are all part of one Section. Just as you do not (hopefully) rip pages out at random from books, the pages of a Section are linked by the text that flows from one to the other.
    If you want to move or delete particular page/s Insert a Section Break at the end of the page before.
    Peter

  • Why are website pages compressing on safari?

    Why are website pages being compressed when using Safari?

    Imac osx v 10.7.5
    Safari v 6.0.2
    I also use google alot for my web browser. not all but most pages i access have some parts of the page either compressed / cut off / overlapping.

  • Why are my pages shifting? Made revisions to template then applied.

    I am doing an overhaul of my website. I made changes to my Basic Page Template but the changes affected each page differently. I changed the pages from % width tables to absolute. Even though I applied my changes to all the pages that use the template, the change is not consistent throughout the site. I checked each page individually and each of them had different widths and % vs. pixels. I changed each one manually. I went through the code and I just can't come up with a solution. They still don't all line up when you navigate from page to page.
    Can anyone help me figure this out? my site is deborahdavisdesign.com
    i'm working on Mac G5 OS 10.5.7, with a 2.5gb hd and 1.5gb ram. Using DW8.
    Thanks so much.

    Thank you! I didn't know that. I made revisions to each page. But it was so confusing selecting the tables and putting in the correct value. I must have selected them dozens of times before I was able to select them in all the ways possible to give each one a consistent value. It didn't make any sense to me and ultimately I don't understand how I did it. Do you have any suggestions for selecting tables and the components of tables? And do you have any suggestions for building a better template next time?
    Thanks so much.

  • HT5548 Why are not pages and word in launch pad in spite of them being installed on my I mac and showing in the dock?

    Why are pages and word not in launch pad in spite of both apps being installed on my I mac  and showing in the dock?

    Hi wjosten,
    Yes, I have checked the app folder and there is no imovie in there, there is also nothing in the trash.
    I have also checked the HD for imovie and it seems as though it's just gone?
    Thanks for your help, if you have any other suggestions I would really appreciate them.

  • TS1702 Why are my pics in iPhoto on my iPad different than the pics in the same album in iPhoto on my iMac?

    Why are my album pics in iPhoto on my iPad different than the pics in the same album on my iMac?

    Configuration.

  • TS1702 Why are my apps not updating

    Why are my updates not working for my apps.

    Unless you're using iTunes on your computer to update, you should update only one app at a time.  If you have a bunch of apps in "Waiting" state, click all them to get them to "Paused".  Then, one at a time, click one to get it to Downloading, then Installing, and finally Open.  Then repeat on the next app, etc.

  • Aaaargh!!! Why are alle my templates worthless in the new Pages?!?

    All my custom sections are gone, does anybody know how to get them back? I have templates with over 70 custom sections I can no longer use.. And it looks like it is not even possible to reproduce these templates.

    Hi,
    open your application support folder in your library and go to pages (iwork). Move all your templates to the deskop. Click on them to open them. Pages will ask to import them. There you are.

  • Why no additional Pages templates?

    One of the things I've absolutely loved about Keynote is the ongoing third-party development of great presenatation templates.
    Why hasn't the same thing happened for Pages?
    I'd love to see some additional templates for stationary, business and home forms, etc (like MS Word).
    Or, even a place where users can contribute templates they've updated themselves.
    Maybe this already exists and I'm just missing it. Anyone ideas?
    Thanks,
    Chris

    Good morning Chris,
    I've worked with Keynote, and I have spent a great deal of time with Pages for the past eight months trying to figure out the best way to do things for the creation of templates.
    I have a few which are in progress which were going to be part of MyKeynoteThemes, but am still working on the best way to present them. There is a project in the works which will give a unique spin to any presentation someone might be working on, including a scrapbook of variations, a wide variety of character and paragraph styles and a collection of unique shapes for graphics (I've stayed away from the typical cropped, straightedge images seen in so many others including the ones included with iWorks.
    The Apple Keynote themes were relatively easy to create. Follow the basics for the Apple themes, add different cutouts and layouts and then change the perspective or color to give purchasers a different but similar perspective or color. Time consuming but somewhat easy once you figure out how.
    For Pages it is different. There are so many variations and alterations for how the printed page is used rather than just the relatively safe and docile world of the presentation. Presentations go through the computer to the screen and that is it. Layout programs are dependent on the paper size, the paper style, the printer, the layout, the color and the intention or audience and how the finished project will get there that there is no easy to use cookie cutter technique to build an online empire and (dare I say it) get some cash for your hard work.
    Heck, even though your template looks cool on the screen with complete edge to edge graphics once you print it out you discover that your printer lops off a bit on the edges and bottom because it can't print edge to edge
    It can be frustrating not knowing how the page will look once your audience gets it in their hands.
    Keynote? Place, edit, present. Pages? Place, edit, print, export, use or alter and who knows how your best 'laid' layout will look. There are so many variables for styles, lists and how the printed word has come to be used that it can take over two months to build your basic layout pieces. Just trying to come up with the proper color combinations for character and paragraph styles and provide them in the same format for a wide variety of layouts and uses can take over a month of experimentation.
    I believe there was also an assumption that there would be fewer purchasers for template products as well. There may not be as many Pages users willing to purchase templates as there were Keynote presenters willing to purchase themes.
    It really does come down to what people would be willing to pay, and what they expect to get for their money (Newsletter template, Letterhead Template, Journal, Menu, Logs, Brochure, CD booklets, DVD booklets, Postcards and Business Cards, etc) or just one Newsletter template...
    I've seen some really cheesy newsletter templates in the WIndows World going for $50 and up, while most Keynote themes are in the $20-$40 range. How much would users be willing to pay and what would they expect to get for their money?
    Gerry (and yes, I do have something rather large in the works. MyKeynoteThemes was allowed to go dormant for a reason)
    (Aside: All of your photos or textures used in a Keynote Themewill only have to look good on screen at a maximum of 1024 by 768. With Pages all of a sudden you have to contend with how they are going to look when printed... Not always the same thing as on screen. An image which was suitable at 256K in Keynote now requires 1.5M (at least) to look good on paper... Big difference in production and download. I just wanted to mention that, seeing as how some of my Themes were over 75M to begin with. Imagine how large an included set of photos would be that were suitable for Pages)

  • Why are extra pages opening behind my emails

    I get 3 extra pages behind my emails and I cannot determine why. The initial email is okay, but if there is something I have to click on in the email these pages open. They are blank and continuance of their page names includes the words 'Not Available'. I can take a screenshot but cannot see where to attach it. Thanking you for your kind assistance.

    For my emails I use Thunderbird but my browser is chrome. I am not good at explaining this I know, but the problem occurs when I have to open another page via the email (like for instance this one and, yes, it opens with my browser and the 3 extra pages are there, as they are as I type this reply, having got to your message via the help feature in Thunderbird. The reason I feel it is a Thunderbird 'thing' is because if I open things in my browser direct this does not happen, only happens opening via an email for which I use Thunderbird.
    Kind regards
    SReaton

  • Why are JSP pages not being processed on iPlanet Web Server 4.1.

    JSP's have been enabled under the Servlets tab and the Path variables have been set on the Configure JRE/JDK page as recommended. Servlets are running but JSP's are NOT. Any ideas as to why JSP's are not running?

    Stephen,
    You need to install and point iWS to an external JDK as well.
    Try these instructions below and see if this works for you:
    1) Install your JDK. Make sure that all OS patches needed by the JDK are installed.
    2) Verify that the JDK installed correctly by going to /<JDK_INSTALLATION_HOME>/bin/java -version You should see version information if the bits are working properly.
    3) Install the webserver. When prompted to use the included JRE or to use an internal JDK, choose to use the internal JRE. DO NOT specify an external JDK during installation.
    4) Startup the Admin Server instance at /<server root>/https-admserv
    5) Access the Admin Server through the web interface.
    6) Go to Global Settings | Configure JRE/JDK Paths.
    7) Click on the JDK button and enter into JDK Path the path to the top level of your JDK path, ie /usr/jdk12205a. Leave the JDK Runtime Libpath and JDK Runtime Classpath field blank. Click OK, Save and Apply. If you encounter a problem when clicking OK, close out your browser and stop and start the https-admserv instance from the command line.
    8) Stop and start the Admin Server instance.
    9) Startup the webserver instance at /<server root>/https-<instance>
    10) Create a servlet directory under /<server root>/docs
    11) Copy HelloWorldServlet.class from /<server root>/plugins/samples/servlets/servlets/HelloWorld and place them      in your servlet directory.
    12) Copy HelloWorld.jsp from /<server root>/plugins/samples/servlets/jsp.092/HelloWorld and place them in your document root.
    13) Access your webserver as a client and hit the HelloWorld servlet using the URL      http://<myserver>/servlet/HelloWorldServlet
    14) Access your webserver as a client and hit the HelloWorld jsp using the url http://<myserver>/HelloWorld.jsp
    15) Your webserver is now running servlets using the JDK.
    Keep in mind: Do not specify the JDK path during the installation.

  • Why are internal pages giving the error message "The address isn't valid" (New tab and session restore)?

    Upon restarting firefox today, I was met not with the usual session restore page to which I have grown so accustomed, but an error page stating:
    "The address isn't valid
    The URL is not valid and cannot be loaded.
    Web addresses are usually written like http://www.example.com/
    Make sure that you're using forward slashes (i.e. /)."
    This also appears when I open a new tab. I've lost all of former tabs (of which I had a TON) and my easy access to my most visited sites that new tab usually gives me. Manually punching in about:sessionrestore, about:welcomeback or about:newtab all give this same error message.
    I've already tried restarting in safe mode, and have reset firefox through the troubleshooting page- neither helped in the slightest. In fact, I "fixed" the about:newtab by changing it to :blank instead, and that got reverted in the Reset. Did the most recent update change how the internal pages are handled or something?
    I'd like to fix things back to how they're supposed to be. I end up having to reset Firefox about 5 times a day whenever it gets greedy with my memory, which has never been more than a minor annoyance thanks to the good system restore. But if I can't repair this then it may be time to move on.
    Any ideas?

    Hi.
    I stated in my initial question that I already went through safe mode (and had also tried the theme thing), but regardless, I have tried again. No dice. They're still not fixing the problem.

  • Why are web pages smaller on new pc (Windows 8.1) in Firefox 36.0 and how can I fix it?

    I have just moved from an old pc running Vista to a new one running Windows 8.1.
    When I set it up the first thing I did was download the latest version of Firefox.
    Not sure what version I had on the Vista machine, but this is FF 36.0.
    Then I synced my FF onto my new pc.
    I immediately noticed how different it looked and quickly realized that it was because everything is smaller.
    Not just the font, but every element on the page.
    On Youtube for instance, actually on this page too, the columns are super narrow and don't fill up the screen. They don't reach the edges of the screen and have gaps in between them, and yes, the fonts are tiny.
    Zooming in makes everything bigger, but the layout still looks bad, the gaps remain, it's not a solution.
    I went into windows and tried messing with the resolution and it kind of worked, pages looked slightly better, but weren't back to "normal" AND then all the icons on the FF menu bar (arrows, home button, etc) were big blurry messes.
    Well, that was worse, so I undid the resolution tweaks and don't really know what to try next.
    Nothing I have found online really helps me as I am technically challenged and have no idea what a prefconfigdssccdlxeieio is!
    It also appears that most people had this problem a few years ago. Sorry I'm late, but PLEASE HELP!

    O''philipp [[#answer-697652|said]]''
    <blockquote>
    another thing you could try is this: enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''layout.css.devPixelsPerPx'''.
    double-click it and change its value to '''1.2''' (or any other zoom factor that fits your purpose: 1.0 relates to 100%, 1.2 equals 120% and so on; -1.0 is the default value and will adhere to the system settings).
    </blockquote>
    Okay, I tried it, set it to 1.2 and even more stuff got blurry and fuzzy. Besides everything in the FF menu bar everything in the header on youtube and a few other pages did it too. It did make the pages fill the actual page better, but the blur is worse than this prob so I set it back to -1.0.
    Any other ideas?

  • Why are my pages documents unable to be attached in gmail

    Since downloading Mavericks my Pages documents are unable to be attached in Gmail. Furthermore, in Final Cut Pro X videos that I attempt to post to
    You Tube fail because, according to error window, network connection was lost. None of this happened before I upgraded to Mavericks.

    Here are a couple of discussions indicating that Gmail is working on the Pages attachment issue. In the meantime, one workaround is to use Pages File Menu > Export To command and export to either a Word format or a Pages 09 format.
    https://discussions.apple.com/message/23714858#23714858
    http://productforums.google.com/forum/#!topic/gmail/VXFPW-44clg

  • WHY are there pages missing in my HTML to PDF conversion?!?

    Hello all~
    upon converting/saving webpages to a PDF file (using the "Convert Webpage to PDF" command), there are pages occasionally missing after the conversion. Sometimes the pages are completely gone & sometimes you can see the pysical page, but it is emply/blank! I've adjustted the settings & such without any success. Please, if anyone can help me, it would be MUCH appreciated!
    Thanks in advance~ Joey

    Greetings~
    I perhaps should have been more specific, as to the particular details surrounding my problem. Actually, "graffity" got me pointing in the right direction. 1st of all, the webpage I was trying to convert to PDF was an email hosted by HotMail. So when I tried to print it using the print icon on my "Command Bar," I would had missing information. Then I noticed a printer icon contained within HotMail. Once I clicked on that icon, it reconfigured the page, whereby I was then able to select the "Convert Webpage to PDF" with the DESIRABLE RESULTS.
    In short, if anyone elst has problems saving ALL THE DATA contained within their HotMail, then you MUST 1st click on the printer icon contained WITHIN HotMail... & then you can either print to Adobe OR Convert Webpage to PDF (providing you have the toolbar add-on.
    Ciao~

Maybe you are looking for