TS3212 My PC Windows 7 says I need to reinstall Itunes because mxvcrxo.dll is missing. What does this mean and how can I fix it.
The complete error message says:
The program can]t start because MSVCRXO.DLL is missing from your computer. Try reinstalling the probram to fix this problem.
Itunes seems to be working fine on my IPHONE 4S phone and IPAD.
Thanks for your input.
See Troubleshooting issues with iTunes for Windows updates.
tt2
Similar Messages
-
I have never been able to connect to the itunes store. It always says"itunes could not connect to the itunes store. An unknown error occurred.(306) " So what does this mean and how can I fix it?
Hello zabetnz
Start with the article below to get access to the iTunes Store. If it does not work, then there are some links towards the bottom of the article for additional troubleshooting.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
When I try to set up my time capsule it says that the PPPoE Server is not found... What does this mean and how do I fix it? Thanks !
You are using PPPoE but there is no server to authenticate against.. or the modem is already connected and nothing else can join.
Is this ADSL?
Do you have the modem in bridge?
How does it work with the modem working as router? ie what type of connection does your ISP supply.. eg PPPoE is only one.. PPPoA is another.. IPoA or ETHoA.. and sever other more specialised.. PPPoE can only work where it is supported. -
Everytime i try to sign into my iTunes account, it says: We could not complete your iTunes store request. An unknown error has occured (0x800B0101). What does this mean and how can i fix it?
Hello zabetnz
Start with the article below to get access to the iTunes Store. If it does not work, then there are some links towards the bottom of the article for additional troubleshooting.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
Hey I just got an iphone 4 and everytime it gets to around 47% battery it dies, when I try to turn it on it says the battery is dead, when i place it in the charger it says 47% then continues to charge, could this be over heating or a bug? What is it and how do I fix it?
Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers
Make sure that Mute is not enabled.
2. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it.
6. System Preferences > Sound> Sound Effects
Play sound effects through:
Select "Internal speakers" and then back to "Selected sound output device". -
Please can somebody help, i hvae only had this new ipod since christmas just gone.
Try here:
http://support.apple.com/kb/TS1567
http://support.apple.com/kb/TS1538 -
When I use firefox to get on to the web I get the following message everytime: "Alert: Could not initialize the applications security component. The most likely cause is problems with files in your applications pforfile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security feactures." Once I click the "OK button" at the bottom of the alert box firefox starts but does not act right. For instance it will not let me look for software updates. When I click on "Check for Updates" from the "Help" drop down menu I get a message stating: "There were problems checking for, downloading, or installing this update. Firefox could not be updated because: Update XML file malformed (200). You can update firefox manually by visiting this link and downloading the latest version."
The following support articles should help:
* https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
* https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200 -
Please help!
Try here:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
My internet is still working, but it's very intermittent. This happened after I updated the firmware a few days ago.
Did you remember to completely power cycle the entire network?
You would want to do this after any update or change to the network.
If you did not do this yet......things are out of sequence.
Power off everything on the network.....all devices.....power down order is not important
Wait a few minutes
Start the modem first and let it run a minute or two by itself
Start the next device connected to the modem the same way
Work your way out on the network starting each device about a minute apart
Check the network -
Can you please help me?
If you deleted the Event video, then projects that used video from that Event will no longer play. The project does not contain any video. It references the video in an Event.
If you have not emptied your trash, you may be able to retrieve the Event folder from the trash.
Similarly, if you are running TIme Machine, you may be able to retrieve a copy there.
Or if you have a backup disk, you can get it there. -
What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?
Since pse 9 can only use up to camera raw 6.5 and the d600 needs at least 7.3 and the d800 needs at least 6.7, you can use the
8.6 adobe dng converter to convert those files to dng copies, which then pse 9 should open.
8.6 dng converter
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Note:
If you have windows xp or vista or mac os x 10.6, then you'll need to use the 8.3 dng converter instead
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.3
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube
more info on supported cameras and camera raw plugins required
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications -
When I insert the usb of my Elgato Video Capture into my Macbook Pro, it says 'USB Devices Disabled'? What does this mean and how can I solve it?
I've partitoned Windows swell and it says the same thing? I'm trying to live capture from my Sony Camcorder through Elgato but I just get the above message?This means that the backups were made with a later version than the version currently on the phone. You will have to update the phone to 6.1.3 to be able to restore the backup. You can restore a backup made with an earlier version, but not with a later version.
-
I tried updating my iphone 4 using itunes but i keep getting a message saying iphone software server could not be contacted. What does this mean and how do I fix my iphone which appears to be in recovery mode.
USER-kswest wrote:
BTW I have gone to the "Contact iTunes Support" and do NOT get anywhere. That is why I am here!
You need to contact iTunes support and send an email by following the link I posted.
Simply going there does nothing. -
I have downloaded icloud to my pc, however when i go to sign in to Apple through icloud, i get an error message saying my apple ID is valid but is not an icloud account. What does this mean and how can i update my account so i can access icloud?!
To use iCloud, you must first set it up with your Apple ID on a device with iOS 5 or a Mac with OS X Lion.
Maybe you are looking for
-
all is connected, dates changed in the remote server, i have cleared my history so that its not just going to its memory but actually looking for the page. does anyone have any ideas?
-
How to deal with time in Java program?
It is very common that when you install a program, there is a bar showing the progress of the installation. My question is how to build such a bar in my Java GUI? Also, I would like to insert an underlying clock, recording the time spent in running t
-
How to turn my printer online?
the status of my printer is offline, how to turn it online and start printing wirelessly?
-
How do I transfer songs from my iPad to my computer
I just got an iPad...I bought songs on iTunes but I don't know how to transfer the songs from my iPad to my computer
-
While using WebAccess I can't see recent received items. But if I use find, with a keyword, I can pull them up. I also can pull them up if I click find and leave the search box empty. HELP, I'm spending too much time trying to figure this out.