TS3274 I am getting the error message "you are not a part of the administrator group". How do I get rid of this
I am getting the error message "you are not a part of the administrator group" when I try and set up my ipad and log in with my apple id. How can I bypass this error message?
Firstly, I recommend to go to Central Administration > Security > Manage the farm administrators group > make sure that your account is listed.
Yes, the account that I log into the server is a Farm Admin account
Secondly, did you do the backup or restore operations with PowerShell command or through Central Administration?
Used to be able to do it thru the CA, now I'm running PowerShell and using the scheduled tasks to run it when needed.
If you are using PowerShell, I recommend to run SharePoint Management Shell as administrator.
I'm able to run the backup with the account that is in the Farm Admin group. as I have that setup as the PowerShell account to run under.
If you are using Central Administration, I recommend to run Internet Explorer as administrator.
I still get this error when I run IE as the log in to the server who is in the build in and the SPS Farm Admin Security group:
You are not a local administrator. You must be a member of the Administrators group on the server that is running Central Administration to perform most backup and restore operations.
Similar Messages
-
Getting error message " You are not authorized to access the migration tool "
One of the users is noticed with error message " You are not authorized to access the migration tool " in SAP Cloud for Customer tenant. thanks
Hello Raj,
It seems that this user does not have proper authorization to perform Data Migration.
You need to go to the WorkCenter View Assignment for this user under his access rights & need to assign him the workcenter "Business Configuration" & under it, also assign him relevant access to Data Migration.
This shall fix the issue & the user shall not get this error while trying to perform Data Migration.
Steps:
1. Go to Workcneter: "Application and User Management => Business Users => Seerach for the suer who gets this error => Edit-> Access Rights => Click on Workcenter view Assignment tab & assign the above mentioned worokcenter access and save."
Let me know for any further queries.
BR
Ankur -
HTTP Error 403 You are not authorized to view the requested resource
Hi Experts,
When I open the node "Hierarchie groups" I get the following error: "Connection couldn't be recreated: 1 cause: Encountered invalid managed connection, last cause Couldn't execute interaction. 2 cause: Couldn't execute interaction. "
In the log file I find the following:
User MI_SERVADM, IP address
HTTP request processing failed. HTTP error [403] will be returned. The error is [You are not authorized to view the requested resource.No details available].
I used the User Service for administrator, I have not used the individual user for administrator.
Regards, GokhanAh anyway I receive the above error even when I do a search in the node "Mobile Components".
Now there's this in the LOG DefaultTrace (2 errors following)::
1) Connection is already closed and no longer associated with a managed connection
2) Exception occurred when processing Search:
[EXCEPTION]
com.sap.ip.mi.admin.core.ApplicationException: Connection couldn't be recreated: 1 cause: Encountered invalid managed connection, last cause Couldn't execute interaction. 2 cause: Couldn't execute interaction.
at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerBean.getHierarchy(GroupingControllerBean.java:730)
at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerBean.getHierarchy(GroupingControllerBean.java:580)
at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerLocalLocalObjectImpl0.getHierarchy(GroupingControllerLocalLocalObjectImpl0.java:547)
at com.sap.ip.mi.admin.services.GroupingDelegate.getHierarchy(GroupingDelegate.java:81)
at com.sap.ip.mi.admin.ui.HierarchyGroup.buildUpList(HierarchyGroup.java:252)
at com.sap.ip.mi.admin.ui.wdp.InternalHierarchyGroup.buildUpList(InternalHierarchyGroup.java:409)
at com.sap.ip.mi.admin.ui.Search.triggerSearch(Search.java:222)
at com.sap.ip.mi.admin.ui.wdp.InternalSearch.triggerSearch(InternalSearch.java:286)
at com.sap.ip.mi.admin.ui.Search.wdDoInit(Search.java:138)
at com.sap.ip.mi.admin.ui.wdp.InternalSearch.wdDoInit(InternalSearch.java:272)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.onComponentCreated(ViewManager.java:258)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.fireComponentCreated(ComponentUsage.java:575)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:175)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:141)
at com.sap.lm.webadmin.mainframe.RenderingUtils.loadCurrentPlugin(RenderingUtils.java:189)
at com.sap.lm.webadmin.mainframe.MainFrameView.wdDoModifyView(MainFrameView.java:272)
at com.sap.lm.webadmin.mainframe.wdp.InternalMainFrameView.wdDoModifyView(InternalMainFrameView.java:1419)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Edited by: dpns22 on Feb 1, 2010 10:31 PM
Edited by: dpns22 on Feb 1, 2010 10:59 PM -
I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?
Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
Go to System Preferences a open up the Users pane;
On the left side of the pane, you shuold see Login Options;
Enabled editing option clicking on the lock (it will ask your password);
Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
Select Enable Root Account (you can set a password, or not);
Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
Theorically, from this account you will be able to unistall the application.
After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps -
When trying to sync my iPhone/iPad with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges?
Hello magestecal,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Take care,
Alex H. -
I downloaded and installed 10.7 to my MacBook Air with no issues, but now when I try to save documents to macintosh HD, I get an error message "you do not have permission to save to macintosh HD" I can save to home without issue, just not to theHD. I tried repairing permissions-no progress.
I cannot create new folders on the HD, either. In the macintosh HD permissions window:
Admin Read&write
Wheel Read
Three heads: Read
AppleCare on the phone says I have to re-install the OS using Recovery-this seems a bit over the top. Any ideas?RESOLVED
OS 10.7 no longer allows admin users to save to the top directory-only the pre=determined four folders are allowed now.
By moving all content not in the four main top directory folders (System, Users, Library, Applications) to the directory)s) just below, all was resolved.
The guys at the Genius Bar were just as surprised as me-so we learn something every day, although Apple could let their Geniuses know.. -
I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred. Using itunes 10.5.2.11 and Windows Vista 64. Any help? Thanks in advance!
I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!
-
I tried installing the new Itunes update and now I get the error message r6034 and now itunes is off my system? How do I get Itunes back?
i get a message saying error 7 (windows error 127)
-
Warning messages "You are not a receiver of the work item"...
Hi Experts,
We are facing an issue in which couple of users are getting warning messages "You are not a receiver of the work item" in there Portal Inbox. But they are not getting any warning message while accessing the same from R/3 inbox. We tried replicating the issue but it is working fine for us. Is it related to workitems which are of any particular type??? Kindly suggest.....
Just to add some more thing we have gone through the Forum : UWL workitem error: you are not a receiver of the work item and also the OSS notes: 1133821, but we do not get any appropriate solution.
Please suggest.
Appreciate your quick response.
Thanks,
Harish
Edited by: harish vyas on May 3, 2010 1:24 PMHi Enrique,
Yes users are using SSO.
As suggested I have checked in transaction SU53 and there is no error message for the user i.e. we are getting success message as "The last authorization check was successful".
Please suggest what can I try.
Also adding to this, Warning message which users are getting is not a show stopper i.e. they are able to process workitems successfully.
Thanks,
Harish -
I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?
Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files. -
I received an oline fax, error message "You are not signed up for an appropriate enhanced pdf delivery option required for this request" How do I fix this?
Hi howardw93055634,
Please tell me where you are seeing this error message. It's not one that I'm familiar with as being related to Acrobat or Reader. Is it coming from your online fax service, or does it appear when you try to open the PDF file that you received in Acrobat or Reader?
Best,
Sara -
what to do when a error message says could not be restored because the firmware file is not compatible
Were you updating/restrore via the Restore/update button in iTunes?
Try deleting the existing ufirware file and try again
It is located here:
IPSW file location for Mac and Windows -
Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years). I plugged it into my pc, it was recognized and the software updated. I created a new playlist and tied to sync the ipod. This ipod had never been used on this pc/itunes since the pc is only 2 years old. When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing. I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs). When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them. Only my recent purchases from itunes do not. When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found." How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!? I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again.
Any help is greatly appreciated.This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
How can I get past the error message "Variables are not compatible DMB00"?
Hello,
I'm working in Desktop Intelligence XI and I'm using an Excel data provider and a universe data provider. I've linked the two providers on the common field "Cost_Code". The Excel data provider also has a "Cost_Code_Descr_xls" field so I've created a new variable that makes this description field a detail object associated with the "Cost_Code" dimension. This allows me to use both objects in the report.
Some of the cost codes in my universe data provider are not found in my cost_code Excel provider so I'm trying to create a simple formula to deal with these null values:
= if isnull(<Cost_Code_Descr_xls>) then "Unclassified" else <Cost_Code_Descr_xls>
This is where I get the "Variables are not compatible" error.
Any ideas on how to get around this error?
Thanks!
DavidHi David,
I might have been a bit to quick with just saying that the only thing you needed to do was replacing the object with the variable you created.
The variable is only compatible with 'Cost Code' dimension, but not with any of the other dimensions in the report. Your header probably only contains the 'Cost Code' dimension and as such the formula isn't giving any problems. But your details contain ohter incompatible dimensions.
What you need to do is also create detail variables for the other dimensions and relate those to the 'Cost Code' dimension. Use those newly created detail variables in your report.
Regards,
Harry -
Error message:you are not licensed to open form
Hi readers,
I just want to ask how can i resolve this error message." youare not licensed to open form" it appears when i try to open the production order using the account of one user.in admin account I already choose the "read only" but stil it dosent show.hope you can help me..
VshaThen I would suggest the user does not have access to the module using that license.
You can test by assigning a full professional license & testing
Maybe you are looking for
-
Security question - restricting access to a specific application
Hello, Looking for suggestions on how I could limit connections to a database to a specific application. Here is the scenario. I have an application running from a desktop that has oracle accounts for each user. The user has a read only role by defau
-
How can I tell when an ical event was added?
I'm on a shared ical calendar and there are times when 2 events have been put on at the same time. How can I tell when the event was added and by who? Thanks!
-
Hi - I'm completing an evaluation of Flex, and I had a couple of technical questions that I haven't been able to find answers to. These questions are really to help me determine whether I need FDS in addition to Flex, or if I can do without FDS. In o
-
ITunes 64-bit installer for Acer windows 7
How to install iTunes 64-bit installer for Acer windows 7? I've been trying for many times but i still cant install it.
-
Photobooth auto import to iphoto?
correct me if i'm wrong, but wasnt one of the new features in leaopard suppose to be that photos taken in photobooth are autmatically put in a photobooth folder? why is this not working? am i missing something? was this suppose to be installed when i