U410 Windows 10 multi user hibernation problem

Hi, I ran into a problem with my U410 after installing Windows 10 (x64) on it.I have a multi user setup, (sometimes there are multiple users logged in to the OS) and one of the users tries to hibernate the system by closing the lid.The problem is, that is this case the system cannot go to hibernated mode and after opening the lid and logging in the user seems to have been logged out. Also the nvidia graphic adapter dissapears sometimes.If only one user is logged in, the hibernation works as expected. The setup is: Windows 10 Enterprise x64 (UEFI), Intel i5, 8GB DD3 (dual channel), 32GB samsung mSATA, 256GB Samsung EVO 850, Nvidia Optimus enabled, with latest drivers (chipset: 10.1.2, raid: 14.5.2) Any help apprisiated! Regards,Richárd

edit: sorry guys, n/m..it wasn't a JRE issue after all :)

Similar Messages

While Configuring Multi user Development problem ?

Can you any one help me while configuring MUD? i'm getting error it showing "repository doesnt have any projects", but i'm created two projects
so any one plz help me
Thanks in advance.

Hi,
If your new go through this link....it will solve your problem
http://forums.oracle.com/forums/thread.jspa?threadID=1997439&tstart=15
Hope it helsp you,.
By,
KK

I have windows, one computer but multi users. home sharing is on. how can i share music between users on one computer?

I have windows. One computer but multi users. Home sharing is on. 2 apple accounts-1 per user. 4 devices-2 iphones and 2 ipods per user. How can we share music on one computer between 2 users?

Hi Justinece, I've solved the problem in this way:
In my wife user profile I've set in itunes settings/advanced the path to my music library: /Users/"MY NAME"/Music/iTunes/Itunes media.
Than, from my wife profile using my administrator user and password I've set the "read/write" privileges on the above mentioned folder.
Finally I've added the folder in my wife's library taking care to not duplicate it ( leave blank the flag in itunes setting/advanced).
I really don't understand what's the use of home sharing...

Problem with mode switching/Volume Panel in multi-user environment?

As above - using Windows 7 64-bit with an X-Fi Titanium Fatalty card.
All works well as long as I'm the only person logged in, but if my wife logs into the computer (using Windows 7's built-in multi-user mode...'fast user switching', which is enabled by default), and then I log back in...well, the volume panel app doesn't seem to work. In fact, even using the control panel app, I can't regain control of the soundcard enough to switch modes.
Logging her off doesn't resolve the issue, so it seems like something about her logging on (another user logging in, two volpanlu.exe running, something) is causing my instance to go haywire. [FWIW, I'm a 'standard' user on the PC, and her login is a 'limited' user]
Note that 'killing' the task volpanlu.exe in task managed, then going to the Windows services control panel and stopping and re-starting the 'Windows Audio' service, and finally re-launching volpanlu.exe from the start menu DOES always work to resolve the problem (regardless of if she's logged in or not...this always fixes it).
Still, that's a kinda annoyingly large set of steps to always have to go through whenever I want to change audio mode after she's logged in.
Is there any way to fix this? Any setting I could be missing to optimize the X-Fi control panel for multi-user environments? Any of the X-Fi mod dri've packs handle fast user switching better? Any other ideas?

GA little bit more tinkering around this, and I have some more information:
- Once I "seize control" (the kill of volpanlu, restart 'Windows Audio' service, re-launch volpanlu), if my wife logs back in, now *she* can't change the audio mode

Windows XP: multi-user accounts - one works, another doesnt!

Hi all,
I have installed the JRE many a time, but never on an XP machine with multi-user accounts...
my problem is that a jar file I have will run on one XP account, while the other account won't run, I just get Null Pointer Exceptions if i try to run it using "java -jar myApp.jar" or a Fatal Error JVM error if I double click the jar.
Any ideas? I tried installing the JRE from both user accounts, but no luck. Please help! :(
Scott

edit: sorry guys, n/m..it wasn't a JRE issue after all :)

ISight - connects with windows users no problem?

I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
Skype has a video plugin (only for Windows)
Yahoo! Messenger does not have voice yet (2.5.3)
MSN is badmouthing because of the "M"
I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
The best two alternatives I found are:
a) AIM 5.9
b) Trillian (www.trillian.cc)
Both use a free AIM screen name.
AIM works fine, see also EZJim pages.
TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
TrillianBase is free but has no Video capabilities. The Pro version is 25$.
Regards Coen
ps. if you want to test your setup use my AIM screenname: coenjeukens

I am a windows XP user and I recently upgraded to I tunes 10 and everything on my computer slowed down to a snail pace.. Any other problems out there like this??? I did everything that D528 said to do and it still runs like a snail

I am a windows XP user and I recently upgraded to itunes 10 and everything on my computer slowed to a snail pace. Any other problems out there
like this?? I did everything that D528 said to do and still runs very slow.. Please help. How can I go to an older vertion of itunes.. It worked before???

I am a windows XP user and I recently upgraded to itunes 10 and everything on my computer slowed to a snail pace. Any other problems out there
like this?? I did everything that D528 said to do and still runs very slow.. Please help. How can I go to an older vertion of itunes.. It worked before???

Windows Server 2008 R2: Script create multi users with Windows Powershell

Dear All,
I have windows server 2008 R2 Active Directory Domain Service. I want to create multi users by using Windows PowerShell.
Could you guide?
BR,
Khemarin Set
[email protected]

Dear Awinish,
Your link very my solution. but i'm very basic with Powershell and I never have experience with it.
This is the link original script that you are provide:
function Select-FileDialog
param([string]$Title,[string]$Directory,[string]$Filter="CSV Files (*.csv)|*.csv")
[System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms") | Out-Null
$objForm = New-Object System.Windows.Forms.OpenFileDialog
$objForm.InitialDirectory = $Directory
$objForm.Filter = $Filter
$objForm.Title = $Title
$objForm.ShowHelp = $true
$Show = $objForm.ShowDialog()
If ($Show -eq "OK")
Return $objForm.FileName
Else
Exit
$FileName = Select-FileDialog -Title "Import an CSV file" -Directory "C:"
$ExchangeUsersOU = "OU=ExchangeUsers" # I don understand, I have all users are store in all-users ou
$domain = [System.DirectoryServices.ActiveDirectory.Forest]::GetCurrentForest()
$DomainDN = (([System.DirectoryServices.ActiveDirectory.Forest]::GetCurrentForest()).Domains | ? {$_.Name -eq $domain}).GetDirectoryEntry().distinguishedName
$final = "LDAP://$DomainDN"
$DomainPath = [ADSI]"$final"
$cOU = $DomainPath.Create("OrganizationalUnit",$ExchangeUsersOU)
$cOU.SetInfo()
$UserInformation = Import-Csv $FileName
$OUPath = "LDAP://$ExchangeUsersOU,$DomainDN" # I don understand
$UserPath = [ADSI]"$OUPath"
Write-Host "---------------------------------------------------------------"
Write-Host "Creating LAB Users"
Write-Host ""
Write-Host "---------------------------------------------------------------"
Foreach ($User in $UserInformation){
$CN = $User.samAccountName
$SN = $User.Surname
$Given = $User.givenName
$samAccountName = $User.samAccountName
$Display = $User.DisplayName
$LABUser = $UserPath.Create("User","CN=$CN")
Write-Host "Creating User: $User.samAccountName"
$LABUser.Put("samAccountName",$samAccountName)
$LABUser.Put("sn",$SN)
$LABUser.Put("givenName",$Given)
$LABUser.Put("displayName",$Display)
$LABUser.Put("mail","$samAccountName@$domain")
$LABUser.Put("description", "Lab User - created via Script")
$LABUser.Put("userPrincipalName","$samAccountName@$domain")
$LABUser.SetInfo()
$Pwrd = $User.Password
$LABUser.psbase.invoke("setPassword",$Pwrd)
$LABUser.psbase.invokeSet("AccountDisabled",$False)
$LABUser.psbase.CommitChanges()
Write-Host "Script Completed"
If posible, could you help to correct script as: I have domain name: hello.net. All user are store in all-users ou.
BR,
Khemarin Set
[email protected]

Chrome (Windows NT 6.1 6.2) users reporting problems with loading and mouseevents - any insights?

For several years now, I have created simple studies (I do psychological stuff) to run online, recruiting participants through Amazon Mechanical Turk (AMT). I have had no problems until recently (last 6 to 9 months). Now, some AMT users are reporting problems with stimuli loading or buttons not responding immediately when clicked (e.g., advancing to a new screen). What is common amongst all the users experiencing problems is that they use Chrome, and they also tend to be Windows NT 6.1 or 6.2 users running Flash Player 12.0. But not a single Firefox, Safari, or MSE user has ever reported an issue. I'm just looking for help in troubleshooting this problem. Again, the studies I run are incredibly simple (e.g., no videos being loaded from server, etc.), mostly word presentation where I record time and x,y coordinates of mouse movements as they respond to questions. Would attempting to publish for another target version of Flash Player help? The default setting is to publish the .swf and .html wrapper for Flash Player version 11.7. Any ideas? I also use version 13.0.1 of Flash Professional CC to create my studies if it helps.

This is helpful. Thanks. So it would be to my advantage to play around with something like SWFObject 2?
http://www.adobe.com/mena_fr/devnet/flashplayer/articles/swfobject.html
Or is there something else you would recommend?
What I've been doing is a far cry from actual web development, but quite interested in learning more. This swfobject seems to get at what you are suggesting (I think).

I am a windows XP user and I recently upgraded to I tunes 10 and everything on my computer slowed down to a snail pace.. Any other problems out there like this??? Any help would be appreciated

I am a windows XP user and I downloaded I tunes 10 and my computer slowed down to a snail pace.. Any other problems out there?? Any help would be appreciated..

I am a windows XP user and I downloaded I tunes 10 and my computer slowed down to a snail pace.. Any other problems out there?? Any help would be appreciated..

Hi! Windows 7 users can´t open the pdfs and jpegs that I have included into sent e-mails. How shall I resolve the problem?

Hi!
Prolems started after uploading the Lion in March. Now at least Windows 7 users can´t open any pdfs or jpegs that I have included into sent e-mails. They can see that they are included but can´t open them. What can I do?

It's a bug in Outlook. Each version of Outlook has its own unique bug that prevents it form displaying email that didn't come from another Outlook user. Apple has attempted to dumb-down Mail and make it more complex in order to work around these issues, but Microsoft keeps changing the bugs in each version of Outlook instead of making an Internet Email standard compliant email client.
Are they able to right-click on the image and save it from the contextual menu?
Otherwise, make sure Send windows friendly, attachments at end of message are checked and send plain text.
Or, zip the attachments and send that way.
There is also a program called Attachment Tamer that many people have found useful.

Multi User Conference Error (Multiple Subnets)

Hello,
I do not have a Mac OS X Server, but I was told that the OS X Server used Jabber and I am using a Jabber server (Windows based). I was hoping to find someone who has general knowledge of what I'm doing to possibly help out. I did originally post this question here: http://discussions.apple.com/thread.jspa?messageID=4921360#4921360
but I have not gotten a solution yet. It was suggested I post here because they are both Jabber servers.
Basically, I purchased 3 identical iMac computers. They are all running OS X version 10.4.9 with 2.16 GHz Intel Core 2 Duo and 2 GB of RAM. They are all running iChat AV 3.1.8. For authentication, we are using a Windows based Jabber server.
My company has three locations connected via a hardware VPN. Each site has their own subnet and all ports are open between the three sites.
When we first purchased the Mac computers, two went to Location X and were put on Subnet X. The other one was shipped to Location Y and put on Subnet Y. We tested three way video conferencing and it worked fine. We then packed up one of the computers and shipped it out to Location Z on Subnet Z. I can connect to Location X and Location Z on a 1 to 1 basis, but I can't begin a 3 way conversation. It tells me the user in Location Z can't enter a multi user conference.
Audio chat works, as well as text chat. Video chat does not. Based on the specs, I don't believe it is a hardware issue and I don't believe bandwidth is an issue. I spoke with tech support and they said I need only 100 kbps, which I have above and beyond.
As per my previous post in the iChat discussion, the bandwidth needed is actually 384k, which we have. It was also suggested that I run the cron scripts, which did not help. All ports are open, which is not something we need to consider.
I believe the root of the issue is the fact they are all on different subnets, but I can't seem to figure out how to fix that. It was suggested that I use Bonjour as a test, but I do not want a huge amount of traffic running around on the network as it detects the two Macs I need it to find. I have close to 400 users (most with two computers), over 100 servers, 50 users in each of the remote sites...and then to do that over a VPN.....
Any and all help is greatly appreciated and I thank you in advance.
P.S. - I am not super experienced at Mac, but I can usually find my way around. I have been mostly a PC guy most of my life.

Hi,
I appreciate that it was suggested that you post the question on this group, but I'm not sure that this is jabber technology problem.
I feel it is very important that you clarify some points for me.
Are you saying that the problem is only at location Z?
Can you confirm exactly what happens when the ichat Z tries to start the the way conference? Do the other clients get any messages (most important - does the status of client Z change in the window of clients X and Y?)
Need to know what happens when X and Y initiates the video chat.
Please clarity the above.
Jabber as a protocol set is very robust to issues of subnet and firewalls. The initiation of the group conference is processed via the jabber server, but once that phase in complete, the clients communicate directly with each other. If voice works, the video should also work, as the only difference is number of ports used (and bandwidth).
To help, I can give you access to a jabber server outside of your network to test things.

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

When logging on to Windows 7 user gets a second mapped drive to the users home folder

Morning,
I'm working through an issue we've discovered whilst trialing Windows 7. Our environment is setup as follows.
Domain Controllers are Windows Server 2003
Clients are Windows XP and Windows 7
Windows XP and Windows 7 Clients are in seperate OU's
All Windows XP Group Policies apply to Windows XP And Windows 7 clients, Windows 7 policies are then applied to Windows 7 clients after
Windows 7 policies are setup such that any setting defined in a Windows XP Group policy is left unconfigured in the Windows 7 Group policy and only new Windows 7 settings have been set in Windows 7 Group Policies.
We have users home folders mapped in their Account Directory account setting and set to H:\   to connect to
\\domainname\dfs\home\username
In addition we also as a fail safe map the drive via a login script using net use
This has worked fine for years in windows XP, if Active Directory failed to map the drive for any reason then the login script would then map the home drive.
In Windows 7 we have noticed a curious error. We found after a period of a couple of weeks we suddenly started getting a new drive mapped. This was identical to the H:\ drive mapping but was instead under drive Z:\. In other words, the
users home folder is mapped twice on h:\ and z:\. This is not affecting any of the Windows XP users.
I have gone through several logic reasons to ascertain why this has happened with the following findings.
1. Originally we thought the error appeared when we tried out mapping the home drive using the mapped drives functionality new in Windows 7 group policy under preferences > windows settings > drive maps. However, after forcing it to delete the
Z:\ drive using this functionality we only succeeded in removing it with a group policy present to do it. As soon as we removed that group policy the Z:\ drive came back
2. Secondly i thought the reason we would be getting a z:\ drive when we haven't specified it anywhere is because active directory is trying to map to the H:\ Drive but it is already present therefore in Windows 7 it tries to map to a different drive.
Using Windows logic it tries the highest letter first which is unlikely to be in use i.e. z:\. This makes sense because our logon script uses a net use h:\ command to map the drive and i believe by default these are set to perisistent. Therefore
the next time the user logs on H:\ is already mapped so the logic in Active Directory accounts maps the drive to Z:\ instead hence we end up with two mapped home drives. To test this i altered the login script to set the drive maps to
non persistent using persistent:no. The logic here was that when the user logged off the drive would become unmapped so that when Active Directory tried to map the drive it would be able to use H:\. Unfortunately this was not the case and
Z:\ remains.
3. Here is where i resolve the issue but i don't know why and is the bit i need answering. If i go into my account on Active Directory and go to Profile and set the home folder drive letter to another letter i.e. change from H:\ to U:\,
i get prompted to set full control etc and apply. I then set the drive back from U:\ to H:\, again i am prompted for setting full control which i accept.
NOW when i login i no longer receive a Z:\ drive and only get an H:\ drive. YAY, thats what i want, however, i do not understand why this is the case. At first i thought it might be something in the active directory logic when i login to an XP
machine and then login to a windows 7 machine.  IF you bear in mind that although i get a new profile in Windows 7 i still retain the same home folder setting. However, after logging on an XP machine logging off then logging
on a Windows 7 machine i still didn't get the Z:\ drive back.
I have tried creating a new user that ONLY receives our Windows 7 Group Policies and still they receive both an H:\ and a Z:\ drive which rules out the Windows XP policies conflicting with the Windows 7 policies.
Does anyone have any ideas why i would get a second drive mapped to Z:\ logging into Windows 7 on a Windows Server 2003 domain?
Can anyone explain in more detail exactly how the Active Directory functionality works when you specify a connect to Drive letter for a users home folder?
My current workaround is simply to add a net use command to remove the Z:\ drive. I do not want to use Mapped Network drives using the new policy settings in Windows 7 RSAT because we have already found issues with it.
<input id="3daf20bf-4f4d-4a05-86da-2c30c205d580_attachments" type="hidden" />

We had the exact same issue happen to us. No issue on Windows XP but Windows 7 mapped two home drives (F and Z). F was mapped during the login script and Z was being mapped by some unknown reason.
We use Netapp for our storage and home drives and use a feature called CIFS Home Drive Mapping. This essentially maps a user to a folder not available through normal CIFS methods causing AD to error when setting the home drive. To get around this we use
dsquery and dsmod to modify this attribute in the user account. This is the command we used...
dsquery user -name %UserNameX% | dsmod user -hmdrv F -hmdir \\filer\$username$
Notice there is no ":" after the F
We determined the root causewas the value for the
homeDrive attributefor the user account was set to "F" instead of "F:"
When we updated our users to reference "F:" instead of "F" in their user, this problem was resolved.
Use LDP or some other method to verify that the homeDrive attribute is set to "F:" (or any other letter) or you will have this issue.

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

U410 Windows 10 multi user hibernation problem

Similar Messages

Maybe you are looking for