UCES Upgrade from 6.04 to 6.35 - Suggestions for tool to merge java customized code

We are planning to upgrade from UCES 6.04 to UCES 6.35. As the customized Java code will be lost after upgrade, I will need to merge the customized code with UCES 6.35 code.
Do you know any good tool which will be useful to merge customized java code with UCES 6.35 code?

Hi Siva,
it will not be lost if you patch the system correctly, but after patching you will have to use the conflict manager to process every single conflict manually - painful.
I assume you did directly modify the SAP standard files instead of seperating any code changes by maintaining it within a custom SC like "myCustomer.co.uk-UCES" instead of "sap.com-UCES". This custom SC includes a DC for war (JSP code), java (obviously all java coding) and a EAR file (to create your custom application.
I normally would setup a project and directly create custom SCs. Almost in the same way of how UCES does extend BD, i would apply the same logic and extend UCES with my own SC. I highly recommend to do that approach.
The best would be to compare your current version using the vanilla SAP code of 6.04. Every difference you find you should isolate. Move them into your own SC. Once you have seperated your code, you can always patch the SAP standard and your custom coding gets merged into the vanilla SAP. In the end you get your own custom EAR version right next to the vanilla EAR version.
Hope that helps a bit

Similar Messages

I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?

I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?
I have seen a lot of discussions upgrading from Boot Camp 4 to 5 but no answers upgrading from boot camp 3.3 to 5. My worry is that if I upgrade from snow leopard to mountain lion, that my bootcamp partition will no longer be able to boot up. There seem to be a lot of threads suggesting problems that are possible. Has anyone gone through this upgrade with success?

Before doing any installation restart OSX from your 10.6 Snow Leopard DVD and use Disk Utility to Both Repair The Disk and Repair the Permissions of your Macintosh HD.
Next remove your Snow Leopard DVD and restart your iMac into OSX.
Update to the latest version of OS X Snow Leopard by clicking the Apple icon and choose Software Update to install Snow Leopard v10.6.8, the latest version.
Use Time Machine to make a Full Backup of your Macintosh HD.
Shut down and restart into Windows by holding the Option key at the chime and selecting Windows.
Now use Windows Backup to make a Full Image Backup of your Windows Installation to a removable drive.
Shut Down and Boot back into OSX.
Open the Mac App Store from your Dock to buy and download Mountain Lion. Then follow the onscreen instructions to install it.
Upgrading your OSX to 10.8 should not effect the Windows Partition at all since you are only upgrading the Mac side. You should not have to run the Boot Camp Assitant 5 Utility in OSX at all.
Your Boot Camp 3.3 Windows Support Drivers et. al only effect your Windows installation and should continue to run fine after upgrading.
Which version of Windows do you already have installed on the existing Boot Camp Partition?
Is it 32 bit or 64 bit?

What is the best, cheapest way to upgrade from CS3 MAC to a newer CS for PC

What is the best, cheapest way to upgrade from CS3 MAC to a newer CS for PC? I do graphic desing mostly print and some web and want to get into ebooks and more web graphics?

Hi riverwalk2,
I have check & found Design Standard CS3 that you have might be eligible for few special offer for the latest version of Adobe Creative Cloud which is independent of Operationg systems.
Please choose the best option in http://www.adobe.com/products/discount-software-coupons.html?promoid=KAWQR
Hope it helps you,
Regards,
Rajshree

Upgrade from ICM 6 to 7 (TR) -- Domain conversion tool / UMT

Hi, we are currently upgrading from 6 to 7.0 and subsequently to 7.5 (TR, new hardware, new domain, new instance). So far we've staged our W2k3 domain and all the other soon to be ICM servers.
I'm currently trying to migrate the domain users and it tells me that I need to use the Domain Conversion Tool to go migrate the domain users from 6 to 7. (Staging guide chpter 4)
I can't find any documentation on the Domain Conversion Tool, when I run the executable I can see the different triggers (below) but that's it.
I've done an export and gotten a file but what next?
Do I do a convert now?
is the convert going to change my production database?
I'm also reading that the Domain Conversion Tool was replaced by the UMT (for 7.0 to 7.+).
Or should I now use the UMT and point it to my export file?
Im afraid to run the convert and and messing up my Rogger sideA database?
Has anybody use this tool?
any tips and or documentation is appreciated. Thanks
D:\ciscoutils\domainCnvTool>domcvt
The syntax of this command is:
DomCvt.exe /DB:dbname /F:filename /M:mode [/OD:old domain name]
 [/ND:new domain name][/P:password]
 /DB:dbname Specifies the database name to operate on (e.g. cust1_sideA)
 /F:filename Specifies the full path of the file to import or export to
 /M:mode Indicates export mode or convert mode
 E Export mode
 C Convert mode
The following switches are only needed in Convert Mode:
 /OD:old domain name Specifies the old domain name to convert from in NetBIOS form (e.g. MyDomain)
 /ND:new domain name Specifies the new domain name to convert to in NetBIOS form (e.g. MyDomain) or DNS form (e.g. MyDomain.mycompany.com)
 /P:password Specifies the default password to be set for all the users in the new domain
Use quotation marks when there are spaces in the file name or password

Hi,
From the 7.x(y) Staging Guide:　
Common Steps Required before Migrating any ICM ComponentOn the Domain Controllers:
Confirm that Domain Controllers have been upgraded from NT Domain to Windows 2000Active DirectoryOn the CallRouter Server:
　\RouterA\Router\CurrentVersion\Configuration\Global\DBMaintenance.
Note:
If moving a CICM with SideA and SideB disable the Configuration changes on bothsides.
On the Logger server:　
Copy the Domain Conversion Tool (DomCvt.exe) from the ICM 5.0(0) or ICM 6.0(0) Third-PartyTools CD as applicable (Domain Conversion Utility folder) onto the Logger server.
Export the ICM user list using the DomCvt tool using the following command:
domcvt /DB:<instancename>_sideA /F:c:\DomConvert\userlist.txt /M:E.
And then lower down in the guide:
On the Logger server:
Step 18
Run the Domain Conversion Tool to convert the ICM users exported earlier, using the followingcommand:
domcvt /DB: <instance_name>_sideA /F:c:\DomConvert\userlist.txt /M:C /OD:<old_domain_netbios_name> /ND: <new_domain_netbios_name>Note: You can use the /p option to create a global password. If you do not use the /p option,the password is reset to null.
I'm looking to run this myself shortly. The only caveat with this info is that its extracted from the section related to ICM5 and migration from multiple to single forest ... so possibly not the correct info. However, there's not much documentation on this as you've seen!
Jed

Serial Number - upgrade from 5 to 6 - 5 serial number for version 5 missing / lost

Hi, I bought Lightroom 5 a year or so ago from a shop, it was a download card with a serial number on it. I have just bought the upgrade to version 6, but have been asked for the old version 5 serial number. The card is now missing and so I wondered where I can find the version 5 serial number?
Thanks for any help!

Excellent thank for your help. I fixed it another way eventually. The serial number in Lightroom has xxxx for the last 4 digits. Luckily I was upgrading to 6 on the same computer and so I was able to register Lightroom 5, which gave me the full serial number when I logged into my account.
Thanks for taking the time to reply though, I appreciate it.

Upgraded from CS5 to CS6 - Serial number not for a qualifying product. Chat not available

I get a page saying "serial number not for a qualifying product. Please try another. " during install. I upgraded from Design Standard CS5 to Design Standard CS6 .
Also, Chat is never available to me. 6 tries to no avail so far.
Any help would be most appreciated or if someone knows how else I can contact Adobe as Chat is never available.
Thank you.

I attempted to reslove via CS chat but was unable to get assitance due to it being "outdated".
In so many words: That's BS. Only support can look into the customer database and they have to sort it out. Contact them again, escalate the case to the next level until you get someone qualified enough to resolve your issue.
Mylenium

Mac mini wanting to upgrade from 10.5.8 to anything newer for safari to work properly

I have a problem. certain sites are not working because my safari will not support the changes they have made to the website. ei. cannot see anything i want to or update my profiles. I have a mac mini with 10.5.8. and need to upgrade to newer for things to work. these are my specs for my 2009 mac mini...
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MM21.009A.B00
SMC Version (system): 1.19f2
Serial Number (system): YM7503MPYL1
Hardware UUID: 00000000-0000-1000-8000-0016CBAD8BAD
I dont know what else i need to get it to work. and my mother is having the same problems with hers because her os for her mac mini is a 10.4.4. so i need to get hers upgraded as well for her work. she will have less power as my mac as her mini is older. will it still work or will i need to find her a new computer?

Choose About this Mac from the Apple menu and check the processor.
A PowerPC Mac mini can’t be upgraded past 10.5.8.
For a Core Duo Mac, click here, install the DVD, and run Software Update.
For your Mac mini, upgrade it as if it was a Core Duo Mac, and once done, if desired, go to the online Apple Store and order a download code for Lion 10.7.
Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004. If you upgrade the OS, back up the computer first.
(122228)

Steps for ios upgradation from 4.1 to 4.3.3 for iphone 4

hey i m from india n my iphone 4 is officialy unlocked and currently running with ios 4.1 and i want to update it to ios 4.3.3
so how can i update my ios from 4.1 to 4.3.3 and aftr updating my ios ,will the present data remain as it is on the phone or will it get erased?
plz help...

Discussion of jailbroken phones is not permitted on this forum.
By jailbreaking your phone, you have voided your warranty, and eliminated the ability to get help from Apple or from it's forums.
Typically, upgrading the firmware does NOT cause a loss of data, but with a jailbroken phone, who knows? It may very well.

I can't open my iPhoto after I upgraded from the app store. Any suggestions?

Good Morning. I recently upgraded my iphoto at the app store. Since then I cannot open my iphoto. It comes up error 1712. Can anyone give me any help? Thanks
Jeff

Try repair permissions with Disk Utility
Regards
TD

Upgrade from CS2 to CS4 but use serial for a CS3 install?

So, we do not want to go to CS4 just yet.
Is there any way to buy a CS4 license but just install CS3 for now?

A disc (for CS3 which we have from other seats on the company BTW) is just a disc, it's the serial that is important for licensing, that's why Adobe just send out bits of paper these days and you can download a trial or an installer and activate that, DOH! On 19/02/2009 16:52, in article [email protected], "Buko" <[email protected]> wrote: > How can you install CS3 if you don't have CS3?

Upgrade from RH8 to RH9 displays error msg for images/hyperlinks

We imported a RH8 project into RH9 on another computer. For the most part, it went smoothly; however, for some images and hyperlinks, we get the message: The image file "___.jpg" used in "______.htm" is outside of the current project and will not be shown in Project Manager.
Additionally, there are approximately 20 broken links displayed in the Broken Links tab.
Your suggestions would be appreciated as we have multple huge projects we need to upgrade. Thanks

Hi there
For each of the messages about the image being outside the project, you will need to carefully note the image file name, the topic and the location it is reporting. Then you will need to edit the topic and click on the image icon and browse to the image to choose it. That action should correct the link and copy the image into your project.
Broken links will have to be resolved on a "link by link" basis. I was assisting someone else in a different thread and it may be of use to you. Click the link below to view that thread.
Click here to view
Cheers... Rick

I want to upgrade from Express 9 to full Studio (mainly for mastering plugins).

Does anyone know wherer to buy this upgrade, or alternatively where tobuy multipressor and adaptive limiter? thanks

I was told you can not upgrade. You have to buy the new Logic Pro at the App Strore. Then you will have both, Pro and Express. I think, Studio (as such) does not longer exist.
Hope it helps,

Will I lose my gallery of photos if I upgrade from my Lightroom 3 to creative cloud for photographers?

I bought Lightroom 3 a few years ago and love it! I'm looking to purchase Photoshop as well which makes the photographer package work best for me at $9.99/month.
Will I lose my gallery of photos on my account when I upgrade to the CC?
Is it possible to download both applications on more than one device (desktop, laptop, and tablet)? That would be great for my busy lifestyle.
Thanks in advance for your help!

Not sure what the account is with the gallery of photos on so hard to say.
You certainly won't lose anything you currently have edited with LR3. When you first open your old LR3 catalogue with the new version you'll be asked to upgrade the catalogue so it's compatible with LR5 but you'll still have the old catalogue too should you wish to go back to LR3.
The CC licence allows you to have the software on two devices. Unless the tablet is an iPad in which case you can also LR Mobile on it as part of the Photographer's CC package too. You can't use the full versions of LR on three platforms on one CC licence though, no.

I hear audio after leaving the pogo bingo luau room long after signing off from pogo. i have the latest flashplayer for fedora linux and java installed.

as above

Hi audiopaster, that sounds like a lingering sound from another window. Is Firefox completely closed when the audio continues as well?
What I will do is look around and let you know what I see, as I try to reproduce this. However I may need your help to troubleshoot.
Since this is a java game, all java applications running in the browser are allowed through the parameters in the Java Console [http://www.java.com/en/download/help/jcp_security.xml#control%20panel Finding Java Console]
In the console look for the Java section and when you hear the audio continuing to place click View to see what is running. Aldo check the General > Java Cache Viewer, is there a temporary audio file there?
Also what version of java is installed? I did not see any when I tested.
It looks like pogo games do not support Linux [http://help.ea.com/en/article/supported-browsers-for-pogo/#2]
So I looked on stack overflow and found [http://stackoverflow.com/questions/6259077/playing-game-music-in-java-how-to-stop-the-stream-of-data] that certain Audio implementations of java will not terminate on exit is because there may not be a call to stop audio.
This makes me wonder if there is a cookie or session that is still going after you navigate away, this sounds really silly though. Please try to clear your cache if this continues. I will ask on irc with more info as well.

Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

Dear Community Friends,
We are planning for upgrade from oracle apps 11.5.10.2 to R12.
We have custom Forms,Form Libraries,Reports and Workflows.
Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
Links i have read for all these in our forum are:
For Custom Forms,
Re: Planning to upgrade from 11i to R12
Re: Custom forms: After upgrading 11i to R12
ofcourse,'n' number of links exists providing metalink notes also.
Hussain,Helios and some others also has given many updates regd this.
For custom workflow upgradation,
Upgrade Workflow 11i to R12
Workflow Upgrade
Workflow Upgrade
For reports,links mentioned the below metalink notes:
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.
Thanks,
Ganesh
[email protected]

Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
Thanks,
Hussein

UCES Upgrade from 6.04 to 6.35 - Suggestions for tool to merge java customized code

Similar Messages

Maybe you are looking for