UJBR Backup lead to corrupted (?) script logic files

Hi all,
I made a backup of an environment on BPC 10 and all of the script logic files in this backup seem to be corrupted as you can see on the screenshot below:
What could be wrong?
Thanks,
Michele

Yes, this is a regular behavior, nobody promise that you will be able to read scripts from backup file.
Options:
1. Instead of backup save scripts directly from UJFS - you will have normal text files.
2. Write code in any language to unzip the scripts from backup files using publicly available zip libraries. Just remember that the file is zipped content without header and footer (you can binary compare the same script zipped by standard zip and the script you have in backup).
Vadim

Similar Messages

Greater Than Function in Script Logic File

BPC Experts,
I've got a pretty simple script logic file to calculate salary amounts, overtime, etc. The purpose of this logic is for forecasting. I have two referenced dimensions, TIME and SCENARIO, where TIME.MONTHNUM is equal to its relative month number (eg: Jan monthnum = 1), and SCENARIO.CURRMONTH is equal to the relative amount of actual months data, (eg Jan currmonth = 0, Feb = 1) because if you are completing a February forecast, you have one month of actual.
The ACTUAL scenario is never touched, but after a month closes, we copy the ACTUAL data to, for example, FEB_FCST. So, after January closes, its actuals are copied to the FEB_FCST scenario so we can complete an actual/forecast (one month actual, 11 months forecast).
Currently, the default logic skips anything in the ACTUAL scenario, by stating "*WHEN SCENARIO, *IS <> "ACTUAL" yada yada yada.
However, when the default logic runs on the forecast scenarios, it takes the same inputs from the months that are copied over from the ACTUAL scenario and adds to the original amount, essentially doubling the value--ultimately causing an incorrect actuals number in the forecast scenario.
My script right now looks like this:
*XDIM_MEMBERSET DATASRC=INPUT
*XDIM_MEMBERSET PRODUCT=NO_PRODUCT
*XDIM_MEMBERSET SHIFT=NO_SHIFTS
*XDIM_MEMBERSET MEASURES=PERIODIC
*WHEN SCENARIO
*IS <> "ACTUAL"
     *WHEN TIME.MONTHNUM
     *IS > SCENARIO.CURRENTMNTH
          *WHEN ACCOUNT
          *IS "SALARIED_MANPOWER"
               *REC(EXPRESSION=((([ACCOUNT].[SALARIED_AVG_WAGE] * (1 + [ACCOUNT].[SALARY_TIMEAHALF]))* [ACCOUNT].[SALARIED_MANPOWER])),ACCOUNT="01100")
          *ENDWHEN
*ENDWHEN
*ENDWHEN
*COMMIT
When it hits line 9 (*IS > SCENARIO.CURRENTMNTH) during validation, it errors. How can I use a "greater than" function to dictate whether or not a given scenario should run default logic on a specific month?
If not, is there a different/better way to do it?
Thank you!
ABF

Hi Alex
Take this sample logic, check the properties in your Time dimension to trouble shoot your issue.
*SELECT(%CAT_VAR%, "ID", CATEGORY, ID= PLAN_APRIL)
*XDIM_MEMBERSET CATEGORY = ACTUAL, PLAN, %CAT_VAR%
*SELECT(%CATMTH%, "STARTMTH", CATEGORY, ID= %CAT_VAR%)
*SELECT(%ACT_PERIOD%, "ID", TIME, MONTHNUM < %CATMTH% AND LEVEL = MONTH AND YEAR = 2010)
*SELECT(%PLAN_PERIOD%, "ID", TIME, MONTHNUM >= %CATMTH% AND LEVEL = MONTH AND YEAR = 2010)
*XDIM_MEMBERSET TIME= %ACT_PERIOD%
*XDIM_MEMBERSET CATEGORY=ACTUAL
*WHEN CATEGORY
*IS ACTUAL
*REC(EXPRESSION=%VALUE%, CATEGORY = %CAT_VAR%)
*ENDWHEN
*XDIM_MEMBERSET TIME= %PLAN_PERIOD%
*XDIM_MEMBERSET CATEGORY=PLAN
*WHEN CATEGORY
*IS PLAN
*REC(EXPRESSION=%VALUE%, CATEGORY = %CAT_VAR%)
*ENDWHEN
Thanks

How to run stored procedure IC Data / to define according script logic file

We want to execute the stored procedure IC Data before the IC Booking. Could anybody tell me, how we have to define the script logic file in detail?
We try it with this code (that runs without any error, but 0 rows are calculated, 0 rows are updated)
*Run_stored_procedure=spicdata('%App%','%C_Category_Set%','%time_set%','','%entity_set%','','','Input','I','%logtable%','%scopetable%')
*commit
We also had tried with this code:
*Run_stored_procedure=spicdata('%App%','%C_Category_Set%','%time_set%','','%entity_set%','','','','','%logtable%','%scopetable%')
*commit

step 1.
Create a store procedure in back end.
step2.
Create a ssis package to execute the store procdure.
step3.
call this ssis pacakge in the data manager package and run the package.

Test script logic file - Errror "Invalid Dimension Account"

Hi BPC Experts,
I am a new bee in BPC and have developed HCM applicaton in BPC 5.1. The Appset contains Finance, Rate & HCM applications.
I am working on HCM and wants to write a script logic file for HCM and it is giving an ERROR "Invalid Dimensin Account".
I have following dimensions in HCM Application:
account_hc --> type A
category_hc --> type C
company_hc --> type E
time_hc       --> time t
costcenter_hc --> type u
datasrc_hc      --> type d
employerole_hc --> type u
geography_hc --> type u
rptcurrency_hc --> type r.
I had defined Dimensions in system_cnstants file as mentioned below.
// application constants
*FUNCTION CATEGORYDIM         =CATEGORY_HC
*FUNCTION TIMEDIM =TIME_HC
*FUNCTION CURRENCYDIM =RPTCURRENCY_HC
*FUNCTION ENTITYDIM =COMPANY_HC
*FUNCTION ACCOUNTDIM =ACCOUNT_HC
*FUNCTION INTCODIM =INTCO
*FUNCTION CATEGORYDIM         =CATEGORY
*FUNCTION TIMEDIM =TIME
*FUNCTION CURRENCYDIM =RPTCURRENCY
*FUNCTION ENTITYDIM =ENTITY
*FUNCTION ACCOUNTDIM =ACCOUNT
// This part is needed when a RATE cube
// is associated to the application
// (FX = single or multi currency)
*FUNCTION THISAPP =HCM
*FUNCTION RATEAPP =RATE
*FUNCTION RATEENTITYDIM =RATESRC
*FUNCTION RATEACCOUNTDIM =RATE
*FUNCTION INPUTCURRENCYDIM =INPUTCURRENCY
*FUNCTION RATEENTITYMBR =RATEINPUT
*FUNCTION RATESRCCALCMBR =RATECALC
*FUNCTION AVGRATEID=AVG
*FUNCTION ENDRATEID=END
I tried to validate and save standard default script logic. But it gives me an error " NO match defined for lookup dimension Category"
So I could not use default logic file to write my script logic. Hence I have created HCM logic file. and Given the following script logic.
*XDIM_MEMBERSET ACCOUNT = XYZ_INC_RetPlan
*WHEN ACCOUNT
*IS XYZ_INC_RetPlan
*REC(FACTOR = 1.1, ACCOUNT)
*ENDWHEN
*COMMIT
While validat & save, I get an error "Invalid Dimension Account".
I do not understand why these errors occuring.
I have checked Category & Account dimensions checked. Every thing is ok. I have created Input schedules and they are working ok. It means the dimensions are fine.
Then why the error ?
Can you guys please guide me.
Appreciate your kind help.

Eswara,
try to close down BPC for ExCEl in case your IS/Reports are trying to access the APPlication.And also any other BPC ADmin screens accessing the same Application/Dimension.
1)try to only do a "process " on the account dimension without including the processing for Applications...
2)then try to do a process on the application.
Now your script should be able to recognize Account dimension and validate fine..
hope this helps...

From where i can run script logic file.

Dear All,
I am new to BPC.
I have a code for currency translation in my Script logic (Default.lgf).
From where i should run this file. Can any help me.
thanks a lot in advance,
Regards,
Satish.

Typically the Currency rates are stored in the "RATE" application. This application is what the script logic or Business rule will call during the conversion process. The rates are only stored by MONTH and by TYPE in a typical planning application. If you need more granular rate details, then you may need to make you time dimension by weeks or days, or add more "TYPES" that are assigned to ACCOUNTs in th ecorressponding account dimension.
But in a simple planning world, most companies will use a monthly rate, one for an AVG and one for END account types, enter this into the RATE application, and run the Defualt logic on submission of data to compile the FX value. Whne you wish to view the results, make certain that you select the correct REPORTING CURRENCY in the report. Many time users forget that data is "normally" entered to an ENTITY,, the ENTITY defines the currency it assumes data is entered, so the plan is loaded to the "LC" member, and converted to USD; or entered in LC, and converted to RS.
But the RATE application will store all the rates required and you may need to open the INPUT template in that application to load the data at the correct intersections.
Hope this helps.

How to execute Script logic file

Hi,
I want to execute a "stand alone" scipt logic file only once. Simply spoken, the script should write some members from application A to application B (I would set the scope for the members that are concerned in the script itself) once. Is there a way to do this? If possible, I would like to get around customizing the DTS packages or use them in a simple way (e.g. can I simply say sth like package==mylogicfile.lgf), without learning all the DTS syntax...

Hi,
There isn't much syntax to learn to get it to run really. Just copy the ICElim package and replace the ICElim.lgx with your own lgf/lgx file.
And if you are only going to do this once, why don't you just write a piece of SQL to do the copy across?
Regards,
Andires

FOR loop in script logic

Dear Gurus,
This is the logic I am working with:
*FOR %MONTH% = 2008.FEB,2008.MAR,2008.APR,2008.MAY,2008.JUN,2008.JUL,2008.AUG,2008.SEP
//CHECK IF THE VALUE OF THE ACCUMULATED DEPRECIATION IS GREATER THAN THE CAPITALIZED ASSET VALUE//
[ACCOUNT].[#AccumDepr] = (([ACCOUNT].[AccumDepr]+[ACCOUNT].[Depreciation])>[ACCOUNT].[EQUIPMENT1]? [ACCOUNT].[EQUIPMENT1] : ([ACCOUNT].[AccumDepr]+[ACCOUNT].[Depreciation]))
*NEXT
I am trying to execute the above script logic, but the system is throwing an error that says
"Duplicate formula found: [ACCOUNT].[#AccumDepr] = (([ACCOUNT].[AccumDepr]+......."
Any idea why this is happening?
Also, could you please suggest a better way of writing the above code?
Thanks,
Vijay.

As a testing scenario, I have calculated the depreciation in a different part of the same logic. Here it is:
//This logic calculates the accumulated depreciation amount for the time period specified in the logic
//NOTE: This logic is not very dynamic and is only valid for the accounts specified in the logic
//A FUTURE ENHANCEMENT TO THIS LOGIC WOULD BE TO MAKE THE "LIFE" OF THE ASSET A $DATAMANAGER VARIABLE$
//AND WRITE A CUSTOM SCRIPT LOGIC
//BEGIN SCRIPT LOGIC FILE//
//CONSTANTS
*XDIM_MEMBERSET CATEGORY=ACTUAL
*XDIM_MEMBERSET ACCOUNT=Depreciation,AccumDepr,NBV_EQUIPMENT1,EQUIPMENT1
*XDIM_MEMBERSET ENTITY=STORE1
*XDIM_MEMBERSET TIME=2008.JAN,2008.FEB,2008.MAR,2008.APR,2008.MAY,2008.JUN,2008.JUL,2008.AUG,2008.SEP
//BEGIN: POPULATE NET BOOK VALUE FROM CAPITALIZED ASSET VALUE //
*WHEN ACCOUNT
*IS EQUIPMENT1
     *WHEN TIME
     *IS 2008.JAN
          *REC(FACTOR=1,ACCOUNT="NBV_EQUIPMENT1")
     *ENDWHEN
*ENDWHEN
*COMMIT
//END: POPULATE NET BOOK VALUE FROM CAPITALIZED ASSET VALUE   //
//BEGIN: CALCULATE DEPRECIATION //
*WHEN ACCOUNT
*IS EQUIPMENT1
     *REC(EXPRESSION=(%VALUE%/6),ACCOUNT="Depreciation")
*ENDWHEN
*COMMIT
//END: CALCULATE DEPRECIATION   //
//BEGIN: CALCULATE ACCUMULATED DEPRECIATION AND NET BOOK VALUE //
*FOR %MONTH% = 2008.FEB,2008.MAR,2008.APR,2008.MAY,2008.JUN,2008.JUL,2008.AUG,2008.SEP
//CHECK IF THE VALUE OF THE ACCUMULATED DEPRECIATION IS GREATER THAN THE CAPITALIZED ASSET VALUE//
*WHEN CATEGORY
*IS ACTUAL
*REC(EXPRESSION=IIF((([ACCOUNT].[AccumDepr] + [ACCOUNT].[Depreciation])>[ACCOUNT].[EQUIPMENT1]), [ACCOUNT].[EQUIPMENT1], [ACCOUNT].[AccumDepr]+[ACCOUNT].[Depreciation]))
*ENDWHEN
*NEXT
//*FOR %MONTH% = 2008.FEB,2008.MAR,2008.APR,2008.MAY,2008.JUN,2008.JUL,2008.AUG,2008.SEP
//CHECK IF THE NET BOOK VALUE OF THE ASSET IS LESS THAN ZERO//
//*[ACCOUNT].[#NBV_EQUIPMENT1] = (([ACCOUNT].[NBV_EQUIPMENT1]-[ACCOUNT].[Depreciation])>0? ([ACCOUNT].[NBV_EQUIPMENT1]-[ACCOUNT].[Depreciation]) : 0)
//*NEXT
*COMMIT
//END: CALCULATE ACCUMULATED DEPRECIATION AND NET BOOK VALUE   //
//END SCRIPT LOGIC FILE//
Please let me know if there is a better way to write this code.
Thanks for all your help.

Send parameter from one script logic to another. SAP BPC 7.5 NW.

Hello!
Before i start, want to apologize for my English.
We work on SAP BPC 7.5 for NetWeaver.
In general, we want to send parameter from one Script logic file to another script logic file.
I will explain why :
1. We have parametr like %C_CATEGORY_SET% (and another four parameter, like groups, currency and etc.) that work on one script(next, i will named it A_Script).
       We will send this parametr from BPC EXCEL (we will create button, then use command MNU_eData_SelectPackage(we also set parameters) and run package that we need, also before we set script for this package by the SAP Guide. We send some data, and this A_Script work good. Everything that we want from this script work correctly. )
2. Next we create another script(B_Script) , and we want use %C_CATEGORY_SET%, but we don't know how use this parametr, if we will just write this parametr on Script Logic, apears error ("C_CATEGORYDATAVALUE" is not assigned to the Data Administrator). We try to solve this problem by using System_Constants.lgf, but we get error.
Code:
*DIM C_CATEGORY          WHAT=%C_CATEGORY_SET%;             WHERE=<<<;                   USING=<<<;    TOTAL=<<<
*DIM C_ENTITY                 WHAT=%ENTITYSET%;                         WHERE=<<<;                  USING=<<<;      TOTAL=<<<
*DIM GROUPS                   WHAT=%GROUPS_SET%;                    WHERE=<<<;                  USING=<<<;     TOTAL=<<<
*DIM RPTCURRENCY         WHAT=%RPTCURRENCY_SET%;         WHERE=<<<;                  USING=<<<;      TOTAL=<<<
*DIM TIME                          WHAT=%TIME_SET%;                          WHERE=<<<;                  USING=<<<;     TOTAL=<<<
If we will change %C_CATEGORY_SET% for ACTUAL, and also change another parameters, script will work, package will run correctly. But we need using parameters, because we didn't exactly what will choose our client.
Our question have BPC Script Logic some kind of Globar Parameter(Variable), that we will set in A_Script, and then use them on B_Script?
How can we define parameter from another script logic, maybe we should send it?
Should we use System_Constants for solving this problem, if yes, how?
Any help will be appreciated
Best Regards,
Erlan Kadraliev
Edited by: Erlan Kadraliev on Feb 8, 2011 4:50 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:58 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:59 PM

Hi Ethan Jewett
1. About %ENTITYSET% it is normal. Before this line i write :
*SELECT(%ENTITYSET%, "ENTITY", GROUPS, "[ID]=%GROUPS_SET%")
So it is not this problem. %ENTITYSET% just parameter, that i used.
2. Are you running the scripts using the same data manager package? I am running two different package for 2 different Script.
For example aPackage for aScript, and bPackage for bScript.
My questions was how can i send parametr from one script to another, for example i can run another script by using BADi command Runlogic, but how can send parameter that i need to used on another script. I have for example parameter %GROUPS_SET% (CG001) on aScript, but i can't get this parameter on another script, if i write %GROUPS_SET% i will get error ("GROUPSDATAVALUE" is not assigned to the Data Administrator)
OR
Maybe if you will answer for next question, i will be able solve problem , How can i send parameter CG001 (this is %GROUPS_SET%, for example it stay in EXCEL in cell A5) from excel to script logic by running package. Maybe i can get cell value on Dynamic Script Data Management?
My Dynamic Script on bPackage
PROMPT(RADIOBUTTON,%CHECKLCK%,"u0412u044Bu0431u043Eu0440 u0431u0430u0437u043Eu0432u043Eu0433u043E u043Fu043Eu043Au0430u0437u0430u0442u0435u043Bu044F.",1,{"u0412u0441u0435u0433u043E u0410u043Au0442u0438u0432u044B","u0421u043Eu0431u0441u0442u0432u0435u043Du043Du044Bu0439 u043Au0430u043Fu0438u0442u0430u043B","u0412u044Bu0440u0443u0447u043Au0430 u043Eu0442 u0440u0435u0430u043Bu0438u0437u0430u0446u0438u0438","u0414u043Eu0445u043Eu0434 u0434u043E u043Du0430u043Bu043Eu0433u043Eu0431u043Bu0430u0436u0435u043Du0438u044F u043Eu0442 u043Fu0440u043Eu0434u043Eu043Bu0436u0430u044Eu0449u0435u0439 u0434u0435u044Fu0442u0435u043Bu044Cu043Du043Eu0441u0442u0438"},{"BPAST_ALL","BPEQ","BPPROCE","BPOPIN_GO"})
INFO
(%EQU%,=)
INFO
(%TAB%,;)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,REPLACEPARAM,CHECKLCK%EQU%%CHECKLCK%%TAB%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,MYTEST_145.LGF)
Best Regards,
Kadraliev Erlan

Work Status and Script Logic

Hello, gurus!
Explain please situation with a script logic and work status of data.
I have the script logic file, with code, for example:
*XDIM_MEMBERSET UNIT = 19
*XDIM_MEMBERSET AP_TR_SA = COMMON
*XDIM_MEMBERSET C_DATASRC = MANUAL
*XDIM_MEMBERSET RPTCURRENCY = USD
*XDIM_MEMBERSET CATEGORY = PLAN,ACTUAL
*XDIM_MEMBERSET ENTITY = C1113,C1111
*XDIM_MEMBERSET TIME = 201007
[#CF0700]=([AP_TR_ACCOUNT].[CF0612])-([AP_TR_ACCOUNT].[CF0611])
*COMMIT
Work status is established for (ENTITY=C1113; CATEGORY=ACTUAL,PLAN;TIME=201007) as Approved (data is locked).
Will execute this logic for (ENTITY=C1111;CATEGORY=ACTUAL,PLAN;TIME=201007)? Should I divide this script logic for C1111 and C1113?

I have 2 entities (companies) - C1111 and C1113.
I have the script logic for calculation keyfigures for this entities (it is automatic chain).
C1113 has entered the data and has locked it. When the C1113 will enter the data, the script logic will not been executed.
I have tested it and I have received that:
the script logic has broke when system has tried to write data into database after "Error Work Status check".
If I change the line of script logic as
*XDIM_MEMBERSET ENTITY = C1111,C1113
calculation for C1111 is executed.
Best Regards,
Svetlana.
Edited by: Svetlana Kazaneva on Sep 6, 2010 1:17 PM

Copying the data and ignoring the Script logic

Hi,
I have some data in Actual category for 2010.APR and I would like to COPY the same
(through DM) to Budget category with my default script logic file. When I am trying to
Do the same it is copying the same data into Budget category, ignoring my script logic
Actually it should increase the value.
Can anybody help me in this regard.
Thanks in adv.
Raghu B.S.

The problem it is into script logic.
When you insert records you are inserting records with category Budget.
But your default script logic is inserting new recotrds just in case if the input has category Actual.
So you just to do a correction into your script logic to change the statement
*WHEN CATEGORY
*IS "ACTUAL"
with
*WHEN CATEGORY
*IS "BUDGET"
In this way the default script logic will be executed and after the copy you will have also the records generated by script logic.
Regards
Sorin Radulescu
Edited by: Sorin Radulescu on Aug 5, 2010 2:15 PM

Script Logic - Check Work Status

Hi,
I am using the standard process chain "/CPMB/DEFAULT_FORMULAS_LOGIC" to trigger Script logic file.
I have created some logic to clear and copy data to a targer category. I want to check the workstatus of the target category and if it is locked i want to clear/copy to fail.
I am not sure how to go about this? I was thinking of adding the following but that is just a guess!
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
any advice would be helpful.
Thanks,

Hi,
Ideally did want an option for the user to select option to check whether the copy should happen if the data had been locked. Have done this via the standard COPY package.
Can this be done with the script logic e.g. using paramters in the package?
Or if you create a script logic file does it always check the workstatus?
thanks

Logic File Corruption

I wanted to share my experience with other people that might be looking for an explanation for file corruption under Logic.
For many months I was experiencing frequent file corruption under Logic Pro and I could'nt find what was causing it.... until now.
FYI, unfortunately I still haven't found a way to fix the corrupted files. As far as I know, they're doomed.
I would work on a song for a few hours, withouth any glitch, then close the file.
When I would open the file again and start playing it, all my audio would go crazy (loud sounds and noise blasting through my headphones).
The file was doomed, corrupted and no way to fix it. I would have to start from an older backup and loose all recent changes.
Did lots of research on the web withouth success. I thought the culprit might be some of the virtual instrument I was using, including a new one I installed recently called, "Myroslav Philarmonic".
It was not.
I finally realized I had "Time Machine" running every couple of hours for backups, and it was corrupting any opened Logic files!!!
Lost so much time over this.
Hope it might help someone in the same situation.
Sly

Thanks Erik,
This was easy and solved it. I knew it had to be an easy solution I just overlooked. Keep up the great work!

Script Logic VS Data Transformation File

Hi all,
   I'm new to SAP BPC. I have knowledge of SAP BW.
   I can see conversion file, which we are referring in data transformation file. which we can use for mapping and conversion of external data into internal data.
How data transformation file different form script logic? Are we going to refer script logis in Data transformation file for each required dimension?
Can any of you give me clarity on how to place script logic and data transformation file in BPC data management flow.
I will really applicate all your help!!!
Thanks
Ben.

Nilanjan,
   I have a another quick question...
suppose my bpc application has 5 dimensions. Out of the 5 dimensions, 4 dimensions data i'm getting directly from SAP BW. assume 1 dim, i need to extract by doing look up at different table which also reside in BW.
   how to populate data for DIM 5.
   I got your point that data transformation file purely for field mapping. suppose DIM5 if i want to populate from script logic, wht do i need map in Transformation file. I hope you got my point.
   My question if how to populate a DIM in BPC using lookup approach.
Thanks,
Ben.

Corrupt Logic Files over a Network

Hi,
I am running Logic Pro 7.2.3 over a network of eMacs running back to an XServe. All students have their own individual Home Folders stored back on the Xserve. The Logic Pro application lives on the local eMac.
Students are regularly experiencing corrupted files when they do an incremental 'Save As'. For example students have a Logic Pro document titled 'Mysong 1.1' which has a file size of 432K, they add some additional work to their composition and this gets saved as 'Mysong 1.2' but the resulting file is only 4K - and is totally corrupted.
Often as they do the 'Save As' operation a message comes up saying:
'File with specified name and version number already exists Result Code = -48'
Some students get this dialog box practically every time they do a 'Save as' - other students only get it occasionally. All students have started their composition with the same Logic Template (Autoload) that we distributed to them. This Autolaod was rebuilt from scratch back in May.
Our current workaround is that when the 'File with specified name and version number already exists Result Code = -48' message appears when saving 'Mysong 1.2', the student then does another 'Save As' but this time clicks on the greyed out 'Mysong 1.2' text in the 'Save As' dialog box. This automatically renames the document 'Mysong 1.2'. A 'This file already exists do want to replace it' dialog box comes up, the student clicks 'yes' and the 'Save A's process now works. Simply retyping the file name while trying a 'Save As' doesn't always work but selecting the greyed out text to rename the document does.
One theory put forward by a local tech is that Logic uses a Temp file (stored somewhere in either the local eMac or in the Users Home Folder somewhere) and when a Save As operation is executed the Temp file is copied to the selected location. This process appears to work fine saving Logic files to a local drive (I use Logic all day on a standalone G5 and have never encountered this problem) but somehow gets screwed up in a Network environment.
Anyone aware of Temp files being used by Logic? or have experience with Result Code -48 and its implications.
All was fine with our network setup running Logic 6.4.3/OS X 10.3 but Logic Pro 7/OS 10.4 has had ongoing issues from the day we installed it.
Just to clarify users aren't moving documents with large audio files around the Network - the files are typically MIDI only - not even using virtual instruments.
All eMacs and XServer currently running OS X 10.4.8 - although this problem first occurred as early as April 2006 this year running 10.4.4.
cheers
Scott

i ran into a problem with logic 6.4.3 which was not letting me edit audio files destructively, because a temporary file could not be written to the applications/logic folder - the users did not have permissions to access that part of the HD...
http://discussions.apple.com/message.jspa?messageID=3417133#3417133
your problem sounds like it is different but in some way might still be related.
i really wish logic would let you configure where the program stores it's files so you can anticipate these problems more easily!
this also applies to the library of fx presets and audio files, which under logic, soundtrack pro, garageband, cannot be put in a user definable folder... (or at least to my knowledge!) and why put them in ridiculous places like library/application support/logic/bla bla????
especially when you consider applications such as FCP let you do this easily!!!
<sigh> end of rant
back to your problem:
so far i have not experienced this problem with logic 7 in a similar setup to yours.
Xserve and G5 workstations running OSX 10.4.7 / 4.8
the only difference i can think of is that our setup as a system drive (1st HD) with OSX and all the apps, and a temp drive (2nd HD) where students can save their work...
are you attempting to save the files directly to a network server? if so that might be the cause of the problem... if possible, try to "save as" files locally, then move the files to the server. It may not be an elegant solution, but it will confirm that it is a network issue rather than a logic issue...
hope that helps.
j

FullOffline Backup - ORA-19566: exceeded limit of 0 corrupt blocks for file

Dear SAP gurus,
I am getting an error from the DBA Planning Calendar every time the job for "Full Offline backup" is run. And it is always as you can see from the log on the same file "oracle/SHD/sapdata4/sr3_16/sr3.data16".
The oracle error is the following:
ORA-19566: exceeded limit of 0 corrupt blocks for file /oracle/SHD/sapdata4/sr3_16/sr3.data16
I found the SAP Note 969192 - RMAN Backup of SYSTEM tablespace terminates with ORA-19566
but it does no apply because this is for the tablespace SYSTEM and not PSAPSR3.
Please find below the log:
BR0051I BRBACKUP 7.00 (46)
BR0055I Start of database backup: begomwsv.ffd 2011-08-17 10.01.37
BR0484I BRBACKUP log file: /oracle/SHD/sapbackup/begomwsv.ffd
BR0477I Oracle pfile /oracle/SHD/102_64/dbs/initSHD.ora created from spfile /oracle/SHD/102_64/dbs/spfileSHD.ora
BR0101I Parameters
Name                           Value
oracle_sid                     SHD
oracle_home                    /oracle/SHD/102_64
oracle_profile                 /oracle/SHD/102_64/dbs/initSHD.ora
sapdata_home                   /oracle/SHD
sap_profile                    /oracle/SHD/102_64/dbs/initSHD.sap
backup_mode                    FULL
backup_type                    offline_force
backup_dev_type                disk
backup_root_dir                /mnt/backup/oracle/SHD
compress                       no
disk_copy_cmd                  rman
cpio_disk_flags                -pdcu
exec_parallel                  0
rman_compress                  no
system_info                    shdadm/orashd eccdev01 Linux 2.6.16.60-0.87.1-smp #1 SMP Wed May 11 11:48:12 UTC 2011 x86_64
oracle_info                    SHD 10.2.0.4.0 8192 17654 1114483454 eccdev01 UTF8 UTF8
sap_info                       700 SAPSR3 0002LK0003SHD0011Y01548735220015Maintenance_ORA
make_info                      linuxx86_64 OCI_102 Jan 29 2010
command_line                   brbackup -u / -jid FLLOF20110817100136 -c force -t offline_force -m full -p initSHD.sap
BR0116I ARCHIVE LOG LIST before backup for database instance SHD
Parameter                      Value
Database log mode              No Archive Mode
Automatic archival             Disabled
Archive destination            /oracle/SHD/oraarch/SHDarch
Archive format                 %t_%s_%r.dbf
Oldest online log sequence     17651
Next log sequence to archive   17654
Current log sequence           17654            SCN: 1114483454
Database block size            8192             Thread: 1
Current system change number   1114501246       ResetId: 664011854
BR0118I Tablespaces and data files
BR0202I Saving /oracle/SHD/sapdata3/sr3_15/sr3.data15
BR0203I to /mnt/backup/oracle/SHD/begomwsv/sr3.data15 ...
#FILE..... /oracle/SHD/sapdata3/sr3_15/sr3.data15
#SAVED.... /mnt/backup/oracle/SHD/begomwsv/sr3.data15 #1/15
BR0280I BRBACKUP time stamp: 2011-08-17 10.28.42
BR0063I 15 of 48 files processed - 44100.117 of 121180.346 MB done
BR0204I Percentage done: 36.39%, estimated end time: 11:15
BR0001I ******************________________________________
BR0202I Saving /oracle/SHD/sapdata4/sr3_16/sr3.data16
BR0203I to /mnt/backup/oracle/SHD/begomwsv/sr3.data16 ...
BR0278E Command output of 'SHELL=/bin/sh /oracle/SHD/102_64/bin/rman nocatalog':
Recovery Manager: Release 10.2.0.4.0 - Production on Wed Aug 17 10:28:42 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: SHD (DBID=1683093070, not open)
using target database control file instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6>
allocated channel: dsk
channel dsk: sid=223 devtype=DISK
executing command: SET NOCFAU
Starting backup at 17-AUG-11
channel dsk: starting datafile copy
input datafile fno=00019 name=/oracle/SHD/sapdata4/sr3_16/sr3.data16
released channel: dsk
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on dsk channel at 08/17/2011 10:30:30
ORA-19566: exceeded limit of 0 corrupt blocks for file /oracle/SHD/sapdata4/sr3_16/sr3.data16
RMAN>
Recovery Manager complete.
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.30
BR0279E Return code from 'SHELL=/bin/sh /oracle/SHD/102_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance SHD failed
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.30
BR0506E Full database backup (level 0) using RMAN failed
BR0222E Copying /oracle/SHD/sapdata4/sr3_16/sr3.data16 to/from /mnt/backup/oracle/SHD/begomwsv failed due to previous errors
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.34
BR0307I Shutting down database instance SHD ...
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.34
BR0308I Shutdown of database instance SHD successful
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.34
BR0304I Starting and opening database instance SHD ...
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.47
BR0305I Start and open of database instance SHD successful
Do you guys have any idea on how to solve this issue??
Thanks in advance, Marc

Hi,
I am getting an error from the DBA Planning Calendar every time the job ...
So when was your last successfull backup of this datafile. Check if still available.
If this is some time ago, and may be you are currently without any backup, try to backup without rman at once,
to have at least something to work with in case you get additional errors right now.
Then you need to find out what object is affected. You are on the right way already. You need the statement,
that goes to dba_extents to check what object the block belongs to.
Has the DB been recovered recently, so the block might possibly belong to an index created with nologging ?
(this could be the case on BW systems).
If the last good backup of that file is still available and the redologs belonging to this backup up to current time are as well, you could try to recover that file. But I'd do this only after a good backup without rman and by not destroying the original file.
If the last good backup was an rman backup, you can do a verify restore of that datafile in advance, to check if the corruption is really not inside the file to be restored.
Check out the -w (verify) option of brrestore first, to understand how it works.
(I am not sure it this is already available in version 7.00, may be you need to switch to 7.10 or 7.20)
brrestore -c -m /oracle/SHD/sapdata4/sr3_16/sr3.data16 -b xxxxxxxx.ffr -w only_rmv
You should do a dbv check of that file as well, to check if it gets more information. I.E if more blocks are
affected. rman stops right after the first corruption, but usually you have a couple of those in line, esp. if these are
zeroed ones. (This one would also work with version 7.00 brtools)
brbackup -c -u / -t online -m /oracle/SHD/sapdata4/sr3_16/sr3.data16 -w only_dbv
Good luck.
Volker

UJBR Backup lead to corrupted (?) script logic files

Similar Messages

Maybe you are looking for