Unable to check large model into SQL Server repository via Proxy

I have a model that has over 1000 changes (probably) and I am unable to check the model into a repository on SQL Server 2008R2. We have a proxy service running, and in general the check-in process is much better via the proxy than direct connect. But for a model with "a lot" of changes, the check-in process never completes. I have let it run overnight and it still does not complete. The SQL Server DBA also reports a large "blocking" query running from the PROXY service to the database server when this process seems to "hang".
Has anyone else encountered this behavior? I have had a support ticket open for over a year on this one, with no solution, so I was curious if anyone else found a way to resolve it. (other than avoid "making a lot of changes".

Hi,
First if you want good performance you must use the Proxy. When you use the Proxy PowerDesigner sending large packet of data to the Proxy under a proprietary format (more efficient) and the Proxy run long transactions - many atomic SQL transactions - to the DBMS (SQL Server).
In "PowerDesigner World" the primary use of a direct connection to the DBMS is to create the repository.
For adequate performance the Proxy and the repository (RDBMS) must be installed on the same server. (Also the PD Portal). Thus the thousands of transactions are executed in memory and not over the network (latency problem)
Because you use the SQL Server DBMS you must set ''max server memory'' variable to an appropriate value, by example for 40 users you must set to 8 MB minimum.
You must also activate these two settings - See the PowerDesigner installation Guide
• ALLOW_SNAPSHOT_ISOLATION
• READ_COMMITTED_SNAPSHOT
Physical Server memory usage
a) OS Operating System has need minimum 2 Gb
b) SQL Server runtime 1 Gb
c) SQL Server memory space for PowerAMC 8Gb
d) Proxy memory 6-8Gb
e) I/O memory space 1 Gb minimum
Total 20Gb
Also : Under 'C:\Program Files\Sybase\PowerDesigner 16\ you have "readme.html" file. In this document SAP give information to optimize the referential. Aka modify attribute length TDAT of table PMTEXT
Good luck
Note : SAP know well this problem. SAP would have reduced the number of atomic transactions to the DBMS. Programming techniques exist on this subject. To see.

Similar Messages

Skip bad row during importing large dump into sql server

Hello,
I have an issue during importing very large (more than 3 GB) dump file into sql server express. I have used command line for this purpose. Unfortunately this file was exported in UTF-8 so I had to convert it unicode. The unicode columns contain N' prefix.
Unfortunately the file contains apostrophes in other fields as well.
My question is: Is there an opportunity to skip bad rows during importing? (Force import e.g.)
Sincerely, Laszlo Toth

>>>Unfortunately the file contains apostrophes in other fields as well.
You can concatenate the single quote using the CHAR function to build the string:
SELECT N'Brian O'+CHAR(39)+'Brien'
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Unable to establishing a connection to SQL Server created via SqlManagementClient

Goal:
create an Azure SQL Server via .NET (Microsoft.WindowsAzure.Management.Sql.Modules.SqlManagementClient) and add a database to it.
Problem:
I am NOT able to access the newly created server from .Net code.
Description:
Using SqlManagementClient I SUCCESFULLY create a new Azure SQL Server (see code below).
After creating the server, I am able to access the new server from Azure Portal.
* firewall rule show valid client machine
* "Windows Azure Services" is set to "Yes"
An error occures when I try connecting to the database using the same user and pwd used to create it.
/* the following code results in a connection failure */
//string server = <name of newly created sql server>
//string db = <name of new database to create, inside of the server>
public void CreateDatabase(string server, string db)
using (ReliableSqlConnection conn = new ReliableSqlConnection(
 Configuration.GetConnectionString(server, "Master"),
 SqlRetryPolicy,
 SqlRetryPolicy))
 conn.Open(); //// throws System.Data.SqlClient.SqlException
 //// A network-related or instance-specific error occurred while establishing a connection to SQL Server.
 SqlCommand cmd = conn.CreateCommand();
/* the following code creates a sql server and firewall rules */
ServerCreateResponse response;
SubscriptionCloudCredentials creds;
X509Certificate2 cert;
//// Gets the certificate
cert = CredentialUtil.GetCertificate(certificateStoreName, certificateStoreLocation, certificateThumbprint);
//// Using the certificate and the subscription build credential
creds = new CertificateCloudCredentials(azureSubscriptionId, cert);
//// using creditials create server and set firewall rules
using (SqlManagementClient client = new SqlManagementClient(creds))
 response = client.Servers.Create(new ServerCreateParameters()
 AdministratorPassword = sqlPwd,
 AdministratorUserName = sqlUser,
 Location = location
 if (response.StatusCode == HttpStatusCode.Created)
 //// 0.0.0.0 is added to enable "Windows Azure Services" on the "Configure" tab.
 //// <MyInternetIp> would be my actual IP address.
 //// - (which works for other servers that i have manualy registered
 validIPs = new List<string>() {"0.0.0.0", "<MyInternetIp>"};
 CreateFireWallRule(client, response.ServerName, validIPs);
//// Adds IP to Azure firewall.
private static void CreateFireWallRule(SqlManagementClient client, string azureServerName, IEnumerable<string> validIPs)
 foreach (string ip in validIPs)
 FirewallRuleCreateParameters rule = new FirewallRuleCreateParameters() { Name = string.Format("Allow {0} - {1}", Environment.MachineName, ip), StartIPAddress
= ip, EndIPAddress = ip };
 client.FirewallRules.Create(azureServerName, rule);
/// Error
System.Data.SqlClient.SqlException was unhandled
HResult=-2146232060
Message=A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source=.Net SqlClient Data Provider
ErrorCode=-2146232060
Class=20
LineNumber=0
Number=53
Server=""
State=0

Using SqlManagementClient I SUCCESFULLY create a new Azure SQL Server.
ServerCreateResponse response;
SubscriptionCloudCredentials creds;
X509Certificate2 cert;
cert = CredentialUtil.GetCertificate(parameters.CertificateStoreName, parameters.CertificateStoreLocation, parameters.CertificateThumbprint);
creds = new CertificateCloudCredentials(parameters.AzureSubscriptionId, cert);
using (SqlManagementClient client = new SqlManagementClient(creds))
 response = client.Servers.Create(new ServerCreateParameters()
 AdministratorPassword = parameters.SqlPwd,
 AdministratorUserName = parameters.SqlUser,
 Location = parameters.Location
 if (response.StatusCode == HttpStatusCode.Created)
 CreateFireWallRule(client, response.ServerName, parameters.ValidIPs);

Import MS Access 2013 tables into SQL Server 2012

Hi there,
Is there a step by step example somewhere showing how to import an MS Access 2013 table into SQL Server 2012?
I have read the existing posts and don't see a definitive answer.
I have installed MS Access 2010 engine, first 32 bit then 64 bit.
I have installed the MS Access 2013 runtime on my server.
I use the Office 2015 Access Database Engine OLE DB Provider.
I get the error:
Error 0xc0202009: Source - APEntries [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
Error 0xc02020e8: Source - APEntries [1]: Opening a rowset for "`TableName`" failed. Check that the object exists in the database.
The post regarding the above errors doesn't resolve the issue.
I have full administrative permissions on the server.
What is the trick to making this work?
Thanks,
Ric
Ric Miller

Hi there,
I tried the exact same operation on a third machine.
This machine has Windows 8.1 64 bit, SQL Server 2012 64 bit, MS Office 2013 Plus 32 bit.
I am the administrator on this machine.
I installed this:
Microsoft Access Database Engine 2010 Redistributable 32 bit (because I have MS Office 2013 plus 32 bit installed.)
From here:
http://www.microsoft.com/en-us/download/details.aspx?id=13255
It won't let me install the 64 bit version without uninstalling MS Office 32 bit.
I created an MS Access database on this machine using MS Access 2013 and created a table with 3 records.
I used the "Import and Export Data (32 bit)" from the start menu.
After I installed the "Database Engine 2010 32 bit" driver above, I now have the option of "Office 2015 Access Database Engine OLE DB Provider" as Data Source which I did not have prior to doing this installation.
I selected the driver and added the Properties of the Data Source Name file location of the MS Access file. I am using a blank password.
I go thru the same sequence of selecting a table to import and after running the result is the same:
Error 0xc0202009: Source - APEntries [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
"Error 0xc02020e8: Source - APEntries [1]: Opening a rowset for "`TableName`" failed. Check that the object exists in the database."
This seems to be consistent across three machines with three operating systems with the same files and the same result.
I understand that some people have gotten this to work.
I would appreciate it if anyone can report an error in the above procedure to me.
Thanks,
Ric
Ric Miller

Best way to migrate SharePoint 2003 data into SQL Server 2008

Hi Experts,
I am planning to migrate data from SharePoint 2003 into SQL Server 2008. After the migration SharePoint site will be deleted in couple of months and then that data will be feed into .Net Front end application
1) What is the best and easy way to do it?
2) Is there any way to automate the migration process? i.e. If a new record gets entered into SharePoint it should be populated into SQL Server 2008.
3) Any other suggestions
Thanks,
John

Dear John,
If it's just a few lists, and you just want to import them "as-is" then it should be possible to do so ... and survive to tell the about it ;-)
Generally speaking, You will need to write a small process (program or script) to read/parse each list and check if the item(s) are in the target table (I assuming that there is a distinct table as target
for each list, and that each list has 'something" you can use to distinct each row), if it's not there, the just add them according to your needs.
Then just rerun the process periodically and it would keep your databases up to date (you could even set ti up to update those records that have changes, but that would delay your process significantly)
What i just described is doable, and not TOO complicated, it could be done i a lot different ways, and with different alternatives of programming/scripting languages. for sure you can do it in any flavor
of .net language, and even powershell.
As I mentioned, this is speaking in general, the actual implementation would depend on your specific needs and the kind of data that you have/need to keep.
Best Regards / Saludos, Marianok
Disclaimer: This post, and all included code and information is provided "AS IS" with no warranties or guarantees and confers no rights. Try it at your own risk, I take no responsibilities.
Aclaración: Esta publicación, y todo en código e información en la misma, es provista "AS IS" / "Como Está" sin garantía alguna y no le confiere ningún derecho. Pruebelo su propio riesgo. No asumo responsabilidad alguna.

Error with date field when inserting records into sql server from webdynpro

Dear SDN's,
I am trying to insert the records into sql server through my webDynpro program.
I have created a date field in a dictionary with the datatype date.
In my webdynpro program to insert the date i am following the below format.
String dateString = "2006/12/10";
java.util.Date d=new java.util.Date(dateString);
java.sql.Date date = new java.sql.Date(d.getTime());
int i=stmt.executeUpdate("INSERT INTO TRAVEL_HEADER(TRQID,PROJECTID,REQDT,ADVCE,ETADV,PURTR) values(21, '555-1212', '" + date + "', 5000, '20060501','hi')");
when i try to execute it, it gives the following error.
com.sap.sql.log.OpenSQLException: The SQL statement "INSERT INTO "TRAVEL_HEADER" ("TRQID","PROJECTID","REQDT","ADVCE","ETADV","PURTR") VALUES (21,'555-1212','2006-12-10',5000,'20060501','hi')" contains the semantics error[s]: - type check error: new value (element number 3 (CHAR)) is not assignable to column >>REQDT<< (DATE)
Please correct me.
Your help will be appreciated.
Regards,
Sireesha.B

Hi,
int i=stmt.executeUpdate("INSERT INTO TRAVEL_HEADER(TRQID,PROJECTID,REQDT,ADVCE,ETADV,PURTR) values(21, '555-1212', 'date', 5000, '20060501','hi')");
try like this.
I Think in SQL the general format to take date as input like this.
INSERT INTO X VALUES ('10/30/56')
thaks,
Lohi.

Importing Data into Sql Server 2012 from Excel Data

Hi,
I got errors like this when i am doing import data into sql server from excel Data. Can you please help us?
- Executing (Error)
Messages
Error 0xc020901c: Data Flow Task 1: There was an error with Source - demotable$.Outputs[Excel Source Output].Columns[Comment] on Source - demotable$.Outputs[Excel Source Output]. The column status returned was: "Text was truncated or one
or more characters had no match in the target code page.".
(SQL Server Import and Export Wizard)
Error 0xc020902a: Data Flow Task 1: The "Source - demotable$.Outputs[Excel Source Output].Columns[Comment]" failed because truncation occurred, and the truncation row disposition on "Source - demotable$.Outputs[Excel Source Output].Columns[Comment]"
specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - demotable$ returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)

Are you attempting to import into a newly made table or into an existing table? It looks like it's trying to insert data where it cannot be inserted (invalid column or lack of data size in your column).
Try the following:
1). In your excel sheet, highlight the whole sheet and make sure the cells are in 'text' form and try re-importing
2). save the document as ms dos TEXT and import as a text document.
3). double check your columns are correct for the data, for example if you have a column that has a string of 100 characters and your column is 'NvarChar(90)' - that might cause the error? Or just correct data type in your column
3). If that doesn't work and you're inserting into a new table, try importing it as string first and writing a query to insert columns that should be float/integer or whatever. You may want to convert float texts to a 'bigint' first rather than string
> float as that can cause problems if I remember correctly.

How to insert into SQL server table form oracle forms

I created a form with oracle as my database. But there one trigger where I need to insert the data into a sql server table.
Is this possible. If so can any help me out.
Thanks in advance.
Asha

Hi,
You can insert into sql server database using the following steps
Note: Check wether you are using Forms 32 bit drivers. If not the Odbc data source will not work.
step 1: Create ODBC data source for SQL server(one time creation);
step 2: Logout from Oracle and login to SQL server giving the user name,password and host string as odbc:<odbc datasource name>;
step 3: use EXEC SQL statement to insert the values into the SQL server and then logout and login again to your oracle database.
Second Method.
Check the sql server documentation to insert the values using command line parameters. Then you can call the host command to execute this.
Third Method.
Write a VB exe to enter the values in the sql server making two connections one to oracle another to SQL server and then getting values from Oracle and putting in the SQL server database. You can call this exe using the Host command.
Hope this will help You.
Regards
Gaurav Thakur

Import Excel 2007 into SQL Server 2005

Hi
When importing Excel 2007 data into sql via Import wizard:
choose "Microsoft Office 12.0 Access Database Engine OLE DB
Provider" as the data source in SQL Server Import and Export Wizard, then click Properties, switch to the All tab, input your excel file path to the Data source field and input "Excel 12.0" to the Extended Properties field and then click OK to follow the wizard.
I get the following error:
Error 0xc0202009: Source An OLE DB error has occurred. Error code: 0x80004005
Error 0xc02020e8: Source Opening a rowset for failed
Exception from HRRESULT: 0xc02020e8 (Microsoft.sqlserver.dtspipelinewrap)
I have recently upgraded to Vista and did not have this problem in XP, does anybody know how to fix this, as I really need to get the data into SQL server 2005 (without using SSIS)
Thanks!

Hi Jin
This is not a problem in SSIS, this is a problem occuring when I try to import data via the Import/Export wizard in Management studio.
This is the exact error I get:
Error 0xc0202009: Source
- <table_name>[1]: An OLE DB error has occurred.
Error code:
0x80004005
Error 0xc02020e8: Source
- <table_name>[1]: Opening a rowset for “<table_name” failed.
Check that the object exists in the database.
Additional information:
Exception from HRRESULT: 0xc02020e8 (Microsoft.sqlserver.dtspipelinewrap)
Many thanks!!

Bacpac import from Windows Azure into sql server 2012 fails

Very sorry if this is posted in the wrong froum I was not sure where to post
I am trying to verify a bacpac file I downloaded from my windows azure sql instance and I am getting this error when trying to Import into SQl server express 2012. SQL server 2008r2 is also installed on this machine. How can I fix this?
Count not load schema model from package. (Microsoft.SqlServer.Dac)
Program Location:
   at Microsoft.SqlServer.Dac.DacPackage.LoadModel(IPackageSource packageSource)
   at Microsoft.SqlServer.Dac.Extensions.DacExtensions.GetCollationString(IPackageSource packageSource)
   at Microsoft.SqlServer.Dac.Extensions.DacExtensions.GetCollationString(BacPackage package)
   at Microsoft.SqlServer.Management.Dac.DacWizard.CreateDatabaseOnTargetWorkItem.DoWork()
   at Microsoft.SqlServer.Management.TaskForms.SimpleWorkItem.Run()
===================================
Internal Error. The internal target platform type SqlAzureDatabaseSchemaProvider does not support schema file version '2.5'. (File: G:\Fbasic8-2014-2-2-12-10.bacpac) (Microsoft.Data.Tools.Schema.Sql)
Program Location:
   at Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel.UpgradeSchema(ExtensionManager em, String originalSchemaVersion, XmlReader originalSchemaReader, String source)
   at Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel.DeserializeXml(TextReader input, ErrorManager errors, String source, Action`3 constructorParametersSetter)
   at Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel.DeserializePackage(SqlPackage package, ErrorManager errors, Action`3 constructorParametersSetter)
   at Microsoft.SqlServer.Dac.DacPackage.LoadModel(IPackageSource packageSource)
Jon Stroh

Hello,
Just as Mike post above, the issue may occurs as the previous SSDT releases are not compatible with this new version of DACFX.
You can refer to the following blog about this issue and download the latest release of SSDT from
here.
Reference:http://blogs.msdn.com/b/ssdt/archive/2012/10/10/ssdt-amp-dacfx-october-2012-compatibility-notes.aspx
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Running INSERT into SQL Server using Heterogeneous Services

I am running into a show stopping issue trying to insert into a SQL Server table via Oracle.
Basically, I have my Heterogeneous Services set up correctly and I am able to hit the SQL Server database with my INSERT statement. But what is happening is I seem to be manually controlly row locks. I believe HS is issuing the following to the server before my INSERT statement is run:
SET TRANSACTION ISOLATION LEVEL READ COMMITTED
SET IMPLICIT_TRANSACTIONS ON
Also, it does not seem that I ever issue the COMMIT TRANSACTION
command. This leaves the row locked forever... unable to complete the
insert generating an error and not inserting my record.
I would GREATLY appreciate any help you could provide, this is a critical issue.
Thanks in advance,
ivalum21

ORA-02047: cannot join the distributed transaction in progress
ORA-06512: at "MY_PACKAGE_NAME", line 263
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_Execute: DB_ODBC_ENGINE (1645): ;
[Microsoft][ODBC SQL Server Driver][SQL Server]Disallowed implicit conversion
from data type varchar to data type money, table 'tableA',
column 'total_amount'. Use the CONVERT function to run this query. (SQL
State: 37000; SQL Code: 260)
ORA-02063: preceding 2 lines from SQLSERVER_LINK
ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 875
ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 791
ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 1156
ORA-06512: at line 1
That is what I get when I take out the TO_NUMBER()
Message was edited by:
ivalum21

Issues in Importing Access Database into SQL Server 2014 Express

I have been trying to import the Northwind.accdb database into SQL Server 2014 Express using the SQL Server Import and Export Wizard. Every time I try, I end up with the following messages. I have reviewed previous replies given to similar queries but
I am not getting anywhere. Appreciate if anyone can help. Thanks.
Error 0xc0202009: Source - Customers [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
(SQL Server Import and Export Wizard)
Error 0xc02020e8: Source - Customers [1]: Opening a rowset for "`Customers`" failed. Check that the object exists in the database.
(SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)

Tried that. It doesn't support SQL Server 2014. Tried using SQL Server 2012. Ended with following error:
First I got this message:
You are connecting to SQL Server version that is different the version specified in the SSMA project. This may lead to schema not converted correctly and synchronisation issues. Do you want to continue?
I replied with 'Yes' and that ended with the following error.
Connection to SQL Server established successfully.
Connection string: Server=VPCL12S1E\SQLEXPRESS2014;Trusted_Connection=TRUE;Encrypt=FALSE;TrustServerCertificate=FALSE;Application Name=SSMA for Access;Pooling=False;
Error collecting data. See the inner exception for details.

How to save image files into SQL Server?

Hello, All:
Does anyone know how to save image files into SQL Server? Does the file type have to be changed first?? Please help me! Thank you!

You need a BLOB field (usually)... Then you can check this tutorial out:
http://java.sun.com/developer/onlineTraining/Database/JDBC20Intro/exercises/BLOBPut/
There are other exercises on that site, including one on reading the images back.

Certificate issues Active Directory Certificate Services could not process request 3699 due to an error: The revocation function was unable to check revocation because the revocation server was offline. 0x80092013

Hi,
We have some problems with our Root CA. I can se a lot of failed requests. with the event id 22: in the logs. The description is: Active Directory Certificate Services could not process request 3686 due to an error: The revocation function was unable to
check revocation because the revocation server was offline. 0x80092013 (-2146885613). The request was for CN=xxxxx.ourdomain.com. Additional information: Error Verifying Request Signature or Signing Certificate
A couple of months ago we decomissioned one of our old 2003 DCs and it looks like this server might have had something to do with the CA structure but I am not sure whether this was in use or not since I could find the role but I wasn't able to see any existing
configuration.
Let's say that this server was previously responsible for the certificates and was the server that should have revoked the old certs, what can I do know to try and correct the problem?
Thank you for your help
//Cris

hello,
let me recap first:
you see these errors on a ROOT CA. so it seems like the ROOT CA is also operating as an ISSUING CA. Some clients try to issue a new certificate from the ROOT CA and this fails with your error mentioned.
do you say that you had a PREVIOUS CA which you decomissioned, and you now have a brand NEW CA, that was built as a clean install? When you decommissioned the PREVIOUS CA, that was your design decision to don't bother with the current certificates that it
issued and which are still valid, right?
The error says, that the REQUEST signature cannot be validated. REQUESTs are signed either by itself (self-signed) or if they are renewal requests, they would be signed with the previous certificate which the client tries to renew. The self-signed REQUESTs
do not contain CRL paths at all.
So this implies to me as these requests that are failing are renewal requests. Renewal requests would contain CRL paths of the previous certificates that are nearing their expiration.
As there are many such REQUEST and failures, it probably means that the clients use AUTOENROLLMENT, which tries to renew their current, but shortly expiring, certificates during (by default) their last 6 weeks of lifetime.
As you decommissioned your PREVIOUS CA, it does not issue CRL anymore and the current certificates cannot be checked for validity.
Thus, if the renewal tries to renew them by using the NEW CA, your NEW CA cannot validate CRL of the PREVIOUS CA and will not issue new certificates.
But it would not issue new certificates anyway even if it was able to verify the PREVIOUS CA's CRL, as it seems your NEW CA is completely brand new, without being restored from the PREVIOUS CA's database. Right?
So simply don't bother :-) As long as it was your design to decommission the PREVIOUS CA without bothering with its already issued certificates.
The current certificates which autoenrollment tries to renew cannot be checked for validity. They will also slowly expire over the next 6 weeks or so. After that, autoenrollment will ask your NEW CA to issue a brand new certificate without trying to renew.
Just a clean self-signed REQUEST.
That will succeed.
You can also verify this by trying to issue a certificate on an affected machine manually from Certificates MMC.
ondrej.

How to Select from Oracle 8i database and insert into Sql Server 2005 datab

Hi how to Select from Oracle 8i and insert into Sql Server 2005.
Source db as Oracle 8i
Target db as Sql Server 2005.
I need to select one table data from Oracle 8i & insert into Sql Server 2005
Thanks

Thanks Khan..
Is there is any query (OPENQUERY) available for that?
Regards..

Unable to check large model into SQL Server repository via Proxy

Similar Messages

Maybe you are looking for